Sky Hub & Airport Extreme
I have just purchased a latest model Airport Extreme. I am currently on Sky broadband and use a Sky hub to send wifi around the house.
Can someone please let me know what i need to do so i can set up an Apple home network. Is it just a case of plugging the brand new extreme into an ethernet port on the sky hub then using my mac to set up the apple network?
I am no computer expert so would welcome a step by step guide to help me set this up!
Thanks in advance
Andy
Connect an Ethernet cable from one of the LAN Ethernet ports on the Sky Hub to the WAN "O" port on the AirPort and power up the AirPort for a few minutes.
On your Mac....open up Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Other WiFi Devices button
Click on AirPort Extreme xxxxxx
The setup utility will open up and analyze things, then suggest that the AirPort Extreme will create a network
Network Name....enter the name that you want to use for your wireless network
Base Station Name....enter the name that you want to use for the AirPort Extreme device
Password.....must be 8 characters....is the password for your wireless network and AirPort Extreme
Verify the password
The utility will set up everything for you. When you see the message of Setup Complete, click Done and close AirPort Utility.
Now you can select your new wireless network from your Mac, enter the password, and you are online.
Similar Messages
-
Sky broadband, airport extreme and extending the wireless network.
Hi - I am a recent apple convert and as such new to all things mac. My current setup is sky broadband, net gear router, w7 notebook, ipad2 and mac mini. My mac mini is in the studio at the bottom of the Garden and currently has no signal. I am trying to extend the signal using an airport extreme but keep falling at the first hurdle. Connecting the sky router by Ethernet to Airport and trying to setup via utility has got me stumped, the unit just flashes orange. In essence what I am trying to achieve is a network off the sky router through airport that enables all my units to work wirelessly and attach a wireless printer and USB hard drive. Is this going to be achievable or have I wasted my money on the airport extreme unit?
Any help or guidance greatly received.
Thanks
AdePAdeP wrote:
Hi - thanks for your reply. I have my sky (netgear) broadband router connected to the telephone/broadband point. I have then attached an ethernet cable from the router to the wan port on the back of the airport extreme. When I log into the airport utility it recognises the AEB but it just flashes orange which is where I am stuck.
You mean the Netgear is a broadband modem and router? If that is the case try disabling the Sky broadband router function as it is not compatible with the AEB. If your router is a wireless router, you will have to disable this function then see if you can connect. If your modem is separate from the router, you have to connect directly to the ethernet port of the modem and skip the Netgear router all together. -
Set up DynDNS access through existing network with new Airport Extreme
Hey everyone!
I just can't seem to figure out what I am doing wrong here...
I am working with an office network which was initially set up with a Linksys router and a separate Linksys hub connecting two Macs and a network printer in one particular room. We added several new iMacs and for ease of connectivity, decided to add a new Airport Extreme base as one of the new iMacs is acting as a server for a database the other new wireless iMacs connect to. Also, all the machines need access to the connected network printers connected in various parts of the office.
What we have now is the original Linksys router -> Linksys hub -> Airport Extreme. Everything seems to be working fine this way but I do believe that both the Linksys router AND the Airport Extreme are distributing IP addresses, which I'm thinking, could be the problem. I set up a DnyDNS account just fine, assigned port # 8080 on the server iMac and also opened port 8080 on both the Linksys and Airport Extreme. I still cannot get through to the server via DynDNS however.
I am wondering if I should turn off IP distribution on the Airport Extreme and let the Linksys router handle all that? The software that the other wireless iMacs run to access the database on the server depends on the server IP address too, so will this need to be changed if the Linksys is handling IP addressing? How does the hub affect any of this... does it change or interfere with the addressing in any way?
Thank in advance for any ideas or suggestions!maxyourmacs, Welcome to the discussion area!
I am wondering if I should turn off IP distribution on the Airport Extreme and let the Linksys router handle all that?
Yes
The software that the other wireless iMacs run to access the database on the server depends on the server IP address too, so will this need to be changed if the Linksys is handling IP addressing?
Probably
How does the hub affect any of this... does it change or interfere with the addressing in any way?
It has no affect. -
Sky Hub (SR101) configured to roaming network on Airport Extreme?
Hi,
Im trying to find out if it is possible to connect a Sky SR101 Hub to a Airport Extreme to create a roaming network with 3 Airport Extremes?
If so is the procedure of connecting it as follows:
1. Sky Hub ethernet port connected to WAN port of 1st Airport Extreme
2. Ethernet Cable from the 1st Airport LAN port to the WAN port of 2nd Airport (in another room)
3. Ethernet Cable from the 2nd Airport LAN port to the WAN port of 3rd Airport (in another room)
What is the best way for the DHCP?
Do I set the 1st Airport that is connected to the Sky Hub do the DHCP and turn the Sky Hub wireless and DHCP off?
I am a bit confused when it comes to the DHCP side.
Thanks for your help in advance.The Sky SR101 is a modem/router that provides both DHCP and NAT service.
So, in a "roaming network" configuration, each one of the AirPort Extremes would be configured to "create a wireless network" using the exact same wireless network name, same security setting and same wireless password as the Sky modem/router. Each AirPort must also be configured to operate in Bridge Mode.
Here, I am assuming that the Sky SR101 will be creating a wireless signal. Optionally, you could turn off the wireless on the Sky modem/router and use it only as a wired router if you prefer. In this case, the 3 AirPorts would be providing your wireless network.
1. Sky Hub ethernet port connected to WAN port of 1st Airport Extreme
2. Ethernet Cable from the 1st Airport LAN port to the WAN port of 2nd Airport (in another room)
3. Ethernet Cable from the 2nd Airport LAN port to the WAN port of 3rd Airport (in another room)
This will work, but better wiring practice.....if possible.....would be to connect each AirPort directly back to one of the Ethernet LAN <-> ports on the Sky modem/router. This is called "home run" wiring.
The reason for this is that your proposed setup makes use of what is known as a "daisy chain" configuration.
While the "daisy chain" type of setup will work....if everything is working.....let's say that you configure the network as proposed in 1), 2), and 3) above.
If the 1st AirPort Exteme has a problem, it will take out AirPort Extreme 2 and AirPort Extreme 3 as well. Or, if AirPort Exteme 2 has a problem, it will take out AirPort Extreme 3 as well.
With the suggested method of connecting each AirPort directly to the Sky modem/router in a "home run" wiring configuration, you might have a future problem develop with any given AirPort, but this will not affect the operation of the other AirPorts.
As far as DHCP and NAT service, it might be possible to configure the Sky SR101 to operate only as a modem with DHCP and NAT functions disabled.
But, even if you can do this, your service provider may not support this type of setup, so you would want to check with Sky first to see 1) If this is possible, 2) How to do it, and 3) Verify that they will support that type of configuration.
If you decide to go this route, then AirPort Extreme 1 would be configured to provide DHCP and NAT service. AirPort Exteme 2 and AirPort Extreme 3 would still both be configured in Bridge Mode. In this case, you would connect AirPort Exteme 2 and AirPort Extreme 3 directly to AirPort Extreme 1. -
airport extreme può essere utilizzata con decoder my sky e lettore WD live hub posti ad un secondo piano per accedere a NAS e on demand?
-
How can I increase the range of my Airport Extreme? I don't live in a particular large house...I just want to be able to use the internet throughout my house. I purchased the Airport Extreme on the understanding that I would be able to access the Wifi connection throughout the house. Any ideas as to what I'm doing wrong, if anything?
Are your walls made out of sheetrock by any chance?
You could purchase another apple router, and set one to EXTEND the other to increase your range. -
Creating my home network, Apple Airport Extreme & Sky
Hello all,
Hoping somebody can help, I’m attempting to set up a network in my home that works a bit like this.
Ok, we’ve had sky broadband for a few months now and have the new grey Sagem router to go with it. I also have the new Apple Airport Extreme station (and an Oldish BTHomehub v1.5, the white one… just kicking about incase its useful!)
What I want to achieve is use Time Machine on my Macbook Pro to wirelessly backup over the network to a Hard Drive plugged into the AE. I want the AE to be upstairs away from the sky router and I also want to be able to plug Ethernet devices into the AE to use the internet (somehow acquired from the router downstairs I assume) like an Xbox, laptop or anything else I might need really).
*Its important to me that the AE isn’t downstairs in the same room as the router, otherwise I would just connect it with a cable and create a wireless network from that.
On top of that (stay with me….) if the AE has the functionality to extend the wireless network further to hit the low signal spots that would help.
I’ve been reading around the internet and various support sites. I know a little about this stuff but I’m not an expert on networking, I know nothing about the different signals N, g, b etc or how IP assigning works. I read a little about WDS networking but I’m not sure which direction to head.
This is probably the closest thing I’ve found to what I’m talking about, If the bottom hub was the sky router and the top hub was the Apple AE.
http://www.jarviser.co.uk/jarviser/repeaterhubs.html
Appreciate any suggestions, thanks.The best way by far is to run ethernet as a kind of backbone between the two stories.. on one storey setup the AE and the other you setup the TC.
I have no idea if one is the main router or not.. or both are bridged.. that doesn't really matter.. the principle is.. one router per network. So whichever is not the main router change to bridge mode.
Both should create a wireless network. You can use roaming setup, where both use identical names and identical security. See http://support.apple.com/kb/ht4260 -
I have just got an Apple Airport time capsule to back up my one year old iMac......how do I do it? I have tried putting an ethernet cable into the time capsule and to my sky hub, all I get is a flashing amber light, can anyone help I am a silver surfer not used to Apple products, but love them, plus I don't understand half of the jargon....HELP please
Apple's Setup Guide for the Time Capsule is pretty simple and clear for most users, and you don't indicate at what point or step that you are getting stuck.
So, please go to page 8 in your Setup Guide to review the topic of Plugging In Your AirPort Time Capsule.
The Sky hub will likely have 4 Ethernet <--> ports on the back of the device. Pick any one that you want and connect one end of the Ethernet cable to the port that you choose.
Then, connect the other end of the Ethernet cable to the WAN (circle of dots) port as shown in the Setup Guide.
Continuing with the instructions on page 8 of the Setup Guide, power up the Time Capsule by connecting the power cord from the back of the Time Capsule to a wall AC jack.
Note that the instructions indicate that the indicator light will be solid amber during startup, and it will change to blinking amber during the setup. The light will remain blinking amber until you have configured the Time Capsule at which time the light will turn green.
Next, go to page 12 of the Setup Guide to see the information to Use your Mac or iOS device to set up your AirPort Time Capsule.
You indicated in your tag line that you were using OS X Mountain Lion (10.8.3), and since that will exceed the minimum requirement of a Mac using OS X (10.7.5) as noted in the guide, you can use your Mac to set up the Time Capsule.
Continuing with the instructions on page 12 of the Setup Guide......
1. Open AirPort Utility on your Mac. It is located as follows: Finder (the smiley face on the dock) > Applications > Utilities > AirPort Utility
2. Select your AirPort Time Capsule and click Continue. You won't be able to do this, but read further......If you do not see the AirPort Time Capsule that you want to configure, choose it from the WiFi status menu in the menu bar, at the top of the screen.
So, clicking on the WiFi icon will yield a small window that looks like this:
The example below shows an AirPort Extreme. You will see Time Capsule on your screen. Click on Time Capsule.
When you click on Time Capsule, that will get the setup wizard going. it will take a minute to analyze the network, then display a screen that looks similar to the illustration below, except that you will see a picture of a Time Capsule on your screen
3. Continuing with the Setup Guide.......Follow the onscreen prompts to create a new network
Network Name...........Type in a simple name that you want to call your network. Do not use the suggested name.
Base Station Name....Type in a simple name that you want to call the Time Capsule. Mine is TC, for example.
Password...................Type in a password that will be used for both the network and the Time Capsule. Write that down.
Verify..........................Type in the password again to Verify
Click Next
The setup wizard will configure everything for you. When you see the message of Setup Complete, click Done.
The Time Capsule is now set up and it will display a green light. -
Can I connect my new AirPort Extreme to a PC as the hub instead of a MAC?
Hi,
I bought a new 27" iMac today and an AirPort Extreme. However, my husband and I want to connect the AirPort Extreme to our cable modem and our PC laptop as the "hub," and then wirelessly link my iMac, my iPhone, my iPad, and our Apple TV to it. This is because of where our cable jack is located.
Is this possible? It seems not to be working when hooked to the PC??
Cab nan anyone help me?Basically it is going to not be possible..
If you want to run the Airport Extreme a long distance from the cable modem.. then either buy an express and plug that in to the cable modem and wireless extend that to the TC..
Or buy a set of EOP adapters and use that in place of ethernet.. which is the one and only "RIGHT" way to do it. -
Setting up a USB external Drive with USB Hub on Airport Extreme
I have successfully hooked up the Airport Extreme Base Station (n) with two printers using a USB Hub. I am now trying to hook up an external hard drive(acomdata 250 gb). When I plug the hard drive into the Hub and turn the drive on the Airport Extreme Base station resets to amber and flashes green for a second then resets to amber again and it keeps doing that until I shut the drive down. I have a Mac Book Pro and an iMac on the network as well as a HP pavilion a730n on the network. I am able to share files between the PC and the Macs; however I can't seem to share the external hard drive. I tested the external hard drive by hooking it up directly to the Mac book and after a few seconds it mounted correctly and I was able to read and write.
Any help with this would be greatly appreciated.
Thank you.
NickI have successfully hooked up the Airport Extreme
Base Station (n) with two printers using a USB Hub. I
am now trying to hook up an external hard
drive(acomdata 250 gb). When I plug the hard drive
into the Hub and turn the drive on the Airport
Extreme Base station resets to amber and flashes
green for a second then resets to amber again and it
keeps doing that until I shut the drive down. I have
a Mac Book Pro and an iMac on the network as well as
a HP pavilion a730n on the network. I am able to
share files between the PC and the Macs; however I
can't seem to share the external hard drive. I tested
the external hard drive by hooking it up directly to
the Mac book and after a few seconds it mounted
correctly and I was able to read and write.
Any help with this would be greatly appreciated.
Thank you.
Nick
What version of the AE firmware are you running? If you upgraded to 7.1, LOTS of people have discovered that Apple broke the USB connectivity for both disks and printers big time. With the 7.1 firmware version a few people can see the disks, but most people CANNOT see the printers. -
I want to use an Apple AirPort Extreme as my home router but at present I have standard BT broadband using the BT Home hub 3. Can I connect them in some way so I don't need to buy a stand alone modem.
IS THIS POSSIBLE???
1. Would Apple AirPort Express be better and easier?
2. What modem would be suitable if I can't do it any other way?
I AM CURRENTLY USING MY INTERNET WITH PS3,WINDOWS 7 LAPTOP, IPAD AND IPHONE!!!
Any help would be greatly appreciated.
Thanks
John smithYou said that you wanted the layout to look like this:
AT&T 2WIRE Router (wireless off) ---> AirPort Extreme ---> NetGear 16-Port Gigabit Desktop Switch ---> ethernet cabling to ports in most rooms --->
So, we took that at face value....,.but it could look like this if things are more convenient this way, if you prefer:
AT&T 2WIRE > Ethernet Switch > AirPort Extreme and other devices.
- If we include an AirPort Extreme in the overall network setup, are there any potential issues with the 2WIRE router and the AirPort Extreme router "competing" with one another?
No, if you leave the wireless function off on the 2WIRE. If you do want the utilize the wireless on the 2WIRE and the AirPort Extreme, then you want to keep them physically separated by 6-8 feet, or a few meters.
- Do I really need an AirPort Extreme in the final setup?
No, if the AirPort Express will provide enough range for the network.
Or if I just want an extra WAP, can I operate two AirPort Express units (with the same SSID) downstream of a 2WIRE router?
Yes, if both of them are configured to operate in Bridge Mode. If you are using the "wizard" setup utility in AirPort Utility 6.x, the wizard will do this for you automatically.
That is to say, could we have a setup that looks just like the image above, but with an extra AirPort Express tacked on to one of the unused ethernet ports?
You can have as many AirPort Express devices (or AirPort Extreme devices) as you want, as long as each has an Ethernet connection back to the switch. -
How do I add a hub or switch to Airport Extreme?
Hi gang-
I have the 802.11g Airport Extreme. It has only the one Ethernet-out LAN port, and I'd like to add more ports to expand my wired network. What is the best way to do this? Do I plug in a router or hub or just a simple switch? Any tips on how to configure this?
Thanks!
DaveI suggest going with an 4-8 port Ethernet switch ... something like the Linksys EZXS55W or any similar model from another vendor. Just connect an Ethernet cable from the AEBS's LAN port to either the Uplink port (if the switch uses one) or any available port on the switch.
-
I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN on back of Airport Extreme.
Instructions do not mention connection to BT Hub and the BT modem has only one output which you dicsonnect from Hub and connect to airport extreme leaving. Once you do this Hub has no signal.
How do I rectify
Paulyou can also set up the Airport extreme to extend the wireless by hitting the wireless tab in the airport menu then click the drop down menu to select extend
Apple's "extend" function is a proprietary setting that was designed to only work with other Apple routers.
It would be extremely unlikely that this setting would work with a BT product, or any other manufacturer's product for that matter.
But, I haven't tested this with a BT product...and I suppose anything is possible.
Still, I would be extremely surprised if this worked.
The AirPort Extreme might "join" the BT network if you try this......but the AirPort does not provide any additional wireless signal coverage when it "joins" a wireless network. In fact, it really does nothing when it "joins" a network except enable the USB port. -
Airport extreme hub -- lost password help
My husband set up our new Airport Extreme a few weeks ago and things worked fine. The device recognized our printer, and we had no issues -- other than the scanner didn't work with the printer.
I resolved the print issue by downloading a new driver, but when I did that (it required removing all printer info from the computer and then doing a clean install), the reinstall wiped our printer out of the Airport Extreme configuration.
No biggie. I'd run the Airport Extreme share-USB-printer procedure again.
No go. My husband either mistyped or cannot remember the password to the hub, so not only can I not upgrade the Airport Extreme, I can't do anything with it. At all.
Does anyone know what I should do? I'm an admin on this computer, so I should be able to do what's necessary; I just don't know what that is.
I am also a new Mac user (new in December, after decades on a PC), so a resolution isn't coming readily to mind, and I would appreciate any help I can get. We only bought a service plan for our iMac, so the apple store wasn't much help, either.Ah, never mind.
I just discovered the Airport Extreme user guide online, and I think I have what I need. Apparently I can reset the system with a paper clip. Of course I can't find a single paper clip in the house. <sigh> -
Access to external drives connected to Airport Extreme via USB Hub
I have 2 computers connected wirelessly to an Airport Extreme 802.11n base station. I have a Belkin powered USB hub connected to the USB port on the Extreme. There is a Lacie hard drive, a USB printer and a Kingston flash drive connected to the USB hub.
The printer was connected using Bonjour and is working fine. The other devices connected to the USB hub aren't getting picked up. They did work at one point, but are no longer viewable from the computers (MAC Book and Windows XP). How can I re-configure the Extreme or my computers so that they'll work again?DLNA = Digital Living Network Alliance. DLNA works in a Server-Client fashion with the Server providing the means to stream audio/video files to the client. DLNA servers are also called media servers. The AirPort Extreme Base Station (AEBS), with an attached USB HDD at best, can perform as a media storage device ... not as a server. You would still need a media server (either hardware or software) to perform this role.
For example, I use a software DLNA-compliant media server, called TwonkyServer. I run this server on one of my Mac minis. It gets its media files that are stored on a USB HDD attached to my 802.11n AirPort Extreme Base Station (AEBSn). TwonkyServer then streams these video files to my Xbox 360 which performs as a media client/player.
Maybe you are looking for
-
Background image in a portal page??
Hi, How can I set a background image or watermark in a portal page instead of the plain background that comes by default. Regards Sreeram
-
CD/DVD burner was working fine, but now a blank CD or DVD does not show up in the finder. Drive sees and reads existing cds/dvds fine.
-
What is the best approach to return Large data from Stored Procedure ?
no answers to my original post, maybe better luck this time, thanks! We have a stored proc (Oracle 8i) that: 1) receives some parameters. 2)performs computations which create a large block of data 3) return this data to caller. compatible with both A
-
Hi, If any one of them worked to convert PDF file to image format ( jpg or gif ). I need to convert through java code. Please let me know.
-
How do I download photoshop 10 which I previously purchased
how can I download photoshop 10 which i previously purchaedl lost disk