Sky Router firmware upgraded - can no longer login with credentials

I usually have no problems accessing my sky router (white Sky Hub with ADSL) via the page 192.168.0.1 however I tried to login the other day and was greeted with an updated looking summary screen - all very nice I thought, let's go and explore! However when I put in the usual details - username: admin, password: sky I get prompted to input my details again which is very odd. Now I know that I am the only one who accesses the router in this way as my flatmate has never logged in and probably never will so I can only assume the firmware upgrade has caused the password/username to change. I logged in the other week and the password is saved in my browser so I am sure I am not making any mistake here. I have tried in chrome and IE just in case but I have the same issue in both. Has the new firmware brought a new default password? I cannot find any reference to this anywhere on this site so it seems unlikely. I would rather not reset my router to default settings as I have devices with static IP addresses and port forwarding setup that will take me some time to reconfigure. I don't think there is any feature to backup the config unless you are actually logged in to the router but would love to be worng about this. I am guessing I will have to bite the bullet and reset to factory defaults but would welcome any help or suggestions if possible?

After review the events of the morning.....
I normally keep my routers in the basement where my eth jacks all hub.  High on a shelf, I got reasonable coverage on 2.4Ghz even on the second floor.  I went to this router for the Dual mode, but found the 5Ghz didn't make it sufficiently well to the second floor.  So it was moved to the first floor, on a counter.  That morning the router started acting up a bit, not bringing an iphone online.  It was looked at - and a couple of post cards that had been placed on top, removed.  Air flow was not blocked around the sides in any way - just a few pieces of card stock on top to interfere with convection off the top.  
1.  There is no way to look at temperature - maybe the device doesn't even know its own temp.
2.  There is no fan that I can discern.  Clearly, creating a device that is designed to sit on a flat surface in a home environment ought to take into consideration "normal impediments to air flow".   Temp controlled fans is simple, well proven tech.
3.  This design is small, has TWO radios, sits horizonal (thus is going to have lousy convection) - seems to me an engineer ought to have given more thought to not only providing the user with easy to obtain data (temp), alternative methods (fan/vertical mounting) and/or self-protection (to hot, I'm shutting down rather than corrupt my database).
Having spent millions on Cisco gear in my career, I would have hoped that Cisco+Linksys would have a little more Cisco and a little less Linksys.
me

Similar Messages

  • ITouch Firmware Upgrade - Can no longer connect to car audio system

    I just upgraded to 3.1.1 last night on my iTouch and can no loger plug in and connect to the audio system on my Infiniti G35x. The iTouch shows that it is connected by the audio system shows that it isn't. I've checked the cables, etc and all is fine and can connect another iPod without any issues. Thoughts...?

    This is a known issue that started with the 3.0 release, and it affects several auto manufacturers. I was hoping that 3.1.1 would fix this for my Honda, but no dice. Something changed either in the communication protocol or timing, but whose fault it is seems to depend on how many Apple products you own
    You can step back down to the 2.x firmware ... search around for "DFU mode", I did it once and may do it again now that 3.1.1 doesn't solve this.

  • After upgrading to 10.5.3 I can no longer login to my RedHat ES4 shares

    Hello,
    I am a new Mac user so please forgive me if there is a simple answer to this question...
    Since I installed the 10.5.3 update over 10.5.2 I can no longer login/connect to my RH ES4 (SMB Version 3.0.10-1.4E) shares. I can still login to my CentOS 5 (SMB Version 3.0.25b-1.el5_1.4) and my older RedHat 7.3 (SMB Version 2.2.3a) shares, as well as a few windows shares, without any problem. It is just the RH ES4 shares that I can no longer connect to.
    For legacy purposes I configured SMB on both my MacBook Pro and the above mentioned servers to use plain text passwords. To do this on my MacBook this I created nsmb.conf in /etc which contains the following...
    [default]
    minauth=none
    Everything worked perfectly minutes before the upgrade to 10.5.3 and nothing else in the network, software or hardware, has changed.
    Any help would be greatly appreciated.
    Thanks,
    Tom Boilard

    Welcome to the forums... unfortunately SMB issues are not fully mainstream.
    Anyhow, I have scanned the change log of files touched by the update (searching for SMB - original list courtesy of Rixstep). This yielded:
    /Library/Preferences/SystemConfiguration/com.apple.smb.server.plist
    /private/etc/smb.conf
    /System/Library/CoreServices/SmbFileServer.bundle/Versions/A/Resources/DesktopDe faults.plist
    /System/Library/LaunchDaemons/com.apple.smb.server.preferences.plist
    /System/Library/LaunchDaemons/com.apple.smbfsloadkext.plist
    /System/Library/LaunchDaemons/smbd.plist
    /private/etc/smb.conf.template
    /System/Library/Extensions/smbfs.kext
    /System/Library/Extensions/smbfs.kext/Contents/CodeDirectory
    /System/Library/Extensions/smbfs.kext/Contents/CodeRequirements
    /System/Library/Extensions/smbfs.kext/Contents/CodeResources
    /System/Library/Extensions/smbfs.kext/Contents/CodeSignature
    /System/Library/Extensions/smbfs.kext/Contents/Info.plist
    /System/Library/Extensions/smbfs.kext/Contents/MacOS/smbfs
    /System/Library/Extensions/smbfs.kext/Contents/Resources/load_smbfs
    /System/Library/Extensions/smbfs.kext/Contents/version.plist
    /System/Library/Filesystems/smbfs.fs
    /System/Library/Filesystems/smbfs.fs/Contents
    /System/Library/Filesystems/smbfs.fs/Contents/Info.plist
    /System/Library/Filesystems/smbfs.fs/Contents/Resources
    /System/Library/Filesystems/smbfs.fs/Contents/Resources/English.lproj
    /System/Library/Filesystems/smbfs.fs/Contents/Resources/English.lproj/InfoPlist. strings
    /usr/lib/sasl2/smb_lm.so
    /usr/lib/sasl2/smb_nt.so
    /usr/lib/sasl2/smb_ntlmv2.so
    /private/var/db/smb.conf
    Items highlighted in bold could be relevant.
    Have you checked that your entry in nsmb.conf is intact? If it is, could it be overridden by a change to one of the other conf files (or a plist)?

  • I upgraded iPhone 6 to IOs 8.1.3 and I can no longer pair with my 2015 Toyota Highlander.  Upgraded to 8.2 and it still doesn't pair

    I upgraded my iPhone to iOS 8.1.3 and can no longer pair with either the phone in my 2015 Toyota Highlander or my Jawbone earpiece.  Upgraded to iOS 8.2 and still no resolution for the car, but now my Jawbone will finally pair with the iPhone.   Is this a known problem or do I need to get a different phone?

    Hi. You can reset the connecting system on your car to try or make sure if password's verifying is needed to connect.

  • MS merged or changed subscriptions and can no longer login to azure instances

    I got the following email from you and now I can no longer login to do a webdeploy to my azure instances.  Do I need to reset a password or something?  Thanks.
    This mail is confirmation that you successfully changed your subscription to BizSpark Plus on Thursday, December 12, 2013. Please retain a copy of this for your records. Here is a description of the change:
    This restricted offer provides certain qualified BizSpark members heavily discounted access to Windows Azure.
    For account information and options, sign into http://account.windowsazure.com with your Windows Live ID, click the corresponding subscription, and select one of the following options:
    • To update payment information, click ‘Change payment method’.
    • To view a billing statement, click ‘BILLING HISTORY’.
    • To cancel service, click ‘Cancel subscription’.
    Thank you for using Microsoft Online Services.
    Windows Azure

    Hi,
    Because of your subscriptions have been changed or merged, from my experience, the certificates of your service may be not suitable for the new subscription, refer to
    http://msdn.microsoft.com/en-us/library/windowsazure/gg981929.aspx for more information about Manage Certificates in Windows Azure.
    Best Regards

  • After ios5 upgrade can no longer increase font size on iPad or iPhone, any suggestions apart from getting new glasses!! Also the backlight on the iPad isn't as bright as before. Any ideas?

    After ios5 upgrade can no longer increase font size on iPad or iPhone, any suggestions apart from getting a new pair of glasses! Also, the backlight on the iPad isn't as bright as before the upgrade, any ideas?

    Hi Zak, thanks for the reply.
    The filename is whatever is set to be the background fill of the site (I presume the desktop background fill, if mobile versions are set to be different). I've tried a number of different files, sizes and types/formats and the result is still the same, so as far as I can tell it's not the file itself causing the issue...
    It uploads all pages (desktop, tablet and phone versions), .css files and .html files, and even the favicon .ico file but then hangs on the first image file, which incidentally is the background fill image.
    The total number of files is said to be 154. It gets stuck on file number 24.
    Yes the "Resume" dialog appears and upon clicking it just attempts to continue from the hang at the first image file (apparently 66% of the way through).
    Re: the "BC site has changed" part - I thought as much but figured worth reporting.
    ... Incidentally, as I've written this reply, I left the "Resume" dialog open (ie neither clicking "resume" or "cancel" and just as I've finished typing it appears to have published the site successfully?!! (I must've left it for roughly 5 minutes)
    Bizarre behaviour... I'm not sure if this will repeat itself with other sites but I'm sure there's a bug here that needs looking at regardless...?!
    Any thoughts?

  • I just updated my iPad 3 to ios 7.02 and can no longer sync with iTunes on my computer running OS 10.5.8. I'm wary about updating to Lion, which may cause any number of apps on my computer to no longer work. Although I may consider purchasing a new laptop

    I just updated my iPad to IOS 7.02 and unfortunately can no longer sync with my MacBook running OS 10.5.8. I'm wary about updating to Lion as this may cause any number of apps on my Macbook not to work at all or malfunction. Also my MacBook is 5 years old, and I was thinking about purchasing a new computer. I would like to decide when rather than be forced though. Does anyone have any suggestions for a work around? At the moment I do not subscribe to the cloud, and it looks like that is the only way I can back up my iPad now.

    Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
    $19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

  • Just installed 11.0.5.5 and I can no longer sync with my iPhone 4 or my iPhone 5

    I just installed 11.0.5.5 and I can no longer sync with my iPhone 4 or my iPhone 5. Any thoughts? It went from accurately displaying my content to showing most of the content as "Other" and now says it can't sync because it can't determine the apps to sync.

    Hi,
    I have sync issue, too, but a bit different. When connecting my iPhone 4 and hitting the sync button in iTunes 11.0.5 (5), the synch process starts, gets stuck at step 5, then eventually finishes without any error message, but content (TV series / movies) are not updated on the iPhone.
    I already tried to power cycle my MacBook (Intel 13" running Mac OS X Lion) and my iPhone 4 (iOS 6.1.3).
    Was working perfectly before upgrading iTunes. Anybody has a solution to this yet?
    Thanks in advance.
    Martin

  • Why can't I login with my Apple ID when I try to setup Cloud on my MacBook Pro?

    Why can't I login with my Apple ID when I try to setup Cloud on my MacBook Pro?
    thanks,
    Simon

    First question that I am not clear on your answer about: Is the Apple ID itself a valid email address, and the same one that you have as your Primary email address on your account? If the actual Apple ID is not an email address, then that is why you are not able to sign on to iCloud or to verify it....it must be an email address.
    If it is an email address then:
    Update your OS to the latest version - 10.8.5
    Once you have updated, reboot the Mac and then go to Preferences>iCloud and try to sign on with your Apple ID again.
    Check Manage your Apple ID to make sure that your Apple ID/Primary email address is verified.
    If the problem persists, contact iCloud Support to see if they can provide you with an explanation of the meaning of the message. If the Apple ID has already been verified, then I'm not sure why you would be getting this messge:
    https://getsupport.apple.com/Issues.action
    Cheers and best of luck!
    GB

  • Why can't i login with the account i just created???? I am missing an important session!!!!

    why can't i login with the account i just created???? I am missing an important session!!!!

    Hello ljp1,
    What browser are you using to log in to your brother account? It could be a problem with some settings within your browser that is giving you grief.
    Try going through these troubleshooting steps to see if it helps resolve the issue.
    http://goo.gl/TTH2s
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • After reinstalling operating system Windows 7, I lost apps and can no longer sync with Outlook 2010?

    After reinstalling operating system Windows 7, I lost apps and can no longer sync with Outlook 2010?

    apps are stored in
    C:\Users\<your account name>\Music\iTunes\Mobile Applications
    their extensions are .Ipa  you can try doing a search on your harddisk
    unless you formattet it when you reinstalled
    but an app can only ever be bought 1 times on an appleID so if you try to buy them again it will give you a free download of the app and not charge you
    about sync then if you connect the ipad and click info tab and set it to sync your outlook data it should sync without any problems

  • With Mountain Lion I can no longer digitize with my pixma MG6150; any solution please ?

    With Mountain Lion, I can no longer digitize with my Canon Pixma MG6150. Any solution please ?

    If you are using the Preview application and it is not letting you scan then have a look at this post.
    https://discussions.apple.com/message/19168365#19168365
    You could also try using the Image Capture application to scan.
    If you are using MP Navigator then you may need to update it to a later version.

  • After upgrade can no longer connect to Mac from Windows

    I have a wireless network (Linksys) with 2 iMacs, Ubuntu Linux and Windows XP workstations. I have file sharing between the Windows and Mac computers. After upgrading I can no longer see the shared folders on the upgraded iMac from the Windows box. I cannot even ping the iMac by node name, but I can ping it by IP address so it is recognizable on the network. I cannot connect by IP address, however.
    I have file and printer sharing enabled on the Leopard iMac. What can I do to restore the former connection?

    Thank you! That partially solved the problem. I can now see the Leopard Mac and can open my user folder on it. However, the subfolders give an error saying they are not accessible - permission denied. I have gone through the folders and set all of them to Shared, but this did not make them accessible.

  • After my ipad WIFI upgraded to 5.0.1, I can no longer sync with my PC?

    Recently, the new wireless upgrade worked wonderfully.  My ipad is correctly upgraded as of 11/13/11.  For the life of me, I can't figure out why my ipad will no longer sync with Itunes.  I realize that iCloud enables me to push various backups wirelessly, but I still want to sync with my iTunes in order to add playlists and content that will not reside on the cloud.
    When I say that it will no longer sync with itunes, I mean that I cannot get either an iPad or iPod Touch to show as being connected or synced with any number of apple USB cables conntected to my PC and iTunes.  Hard resets, computer reboots...since my upgrade, I can no longer connect these devices.  Can anyone tell me why I can't sync?
    Thank you in advance

    Minor update:  I have multiple PC's in my office.  This same iPad and other apple devices properly work and sync with their connection to this other computer.  Both computers are running the 64bit iTunes and both have Windows 7 64bit OS running on both machines.  I tried deactivating firewalls and even deleted the iTunes with a fresh installation with no avail.
    Something is keeping my Apple mobile devices (iPods, iPads) from being recognized within iTunes.  However, they all are properly recognized by my PC.

  • I can no longer login to Dell Premier! No error message, just bounces back to login. Works fine with IE and Chrome

    For the last couple of version of Firefox my Dell Premier login does not work any more. No error message, just stays at the login page!
    I cleared cache. No difference!
    Any ideas?

    I have had exactly the same problem for several months - and my Javascript is set to on, so that's not the solution.
    It drives me nuts - one of the main reasons I bought an iPhone was to access my work email outside the office, and I can no longer do that. I would be extremely grateful to anyone who knows the solution!

Maybe you are looking for