Skype 4.3 maximizes the upload stream when using t...

What the title says, it maximizes the connection up stream until the connection completely dies and disconnect.
Limiting it with tc works in the sense that it doesn't disconnect, however it still uses too much bandwidth for the video that the other party in the conversation can't hear me at all.
Info:
multilib/skype 4.3.0.37-3
Kernel 3.16 (same on 3.14, 3.15 and 3.{14,15}.*-ck)
Arch Linux

Only solution I found was using a patched skype 4.2 (https://aur.archlinux.org/packages/skype42/) that sends the version was 4.3 to the server.
If microsoft can't handle multiplatform software, why the hell buy it / make it...

Similar Messages

My Skype number is not the number presented when m...

My Skype number is not the number presented when making outbound calls. My subscription had expired but I renewed a day later. My account shows that my Skype number is still active. What do i need to do?

Hi, Atiya85, and welcome to the Community, Please first check if the instruction in this FAQ article does not resolve this problem:https://support.skype.com/en/faq/FA10615/why-am-i-not-receiving-calls-to-my-skype-number Otherwise, please contact Skype Customer Service for further assistance in diagnosing and rectifying the issue. We here in the Community do not have the tools to do this. Regards,Elaine

How do you automatically maximize the active video when it changes...

Hey guys,
I'm looking for a way to automatically maximize the next video in queue when viewing videos online. The specific example I am looking for is here: NHL.com
As you'll see, when the next video in line plays the screen minimizes to regular size. Note that I have an ad-remover so that ad doesn't come up... I'm looking for a way to automatically maximize the video screen when the next video plays (and thus minimizes).
Macros would work but it would be hard to time it and to make it work across a large spectrum of sites. I'm looking for something that more or less detects video applets (automatically or through inputted settings) and automatically full screens it when available...
Thanks!

So we can design robots that can guide weapons launched from thousands of miles away into a specific window of our choosing, but no one has designed a solution for this?
REALLY?!?!1
xD :P

Sending to the Photo Stream when not on wireless.

I was really hoping that iOS7 would allow pushing to the main photo stream when your not connected to wireless. I don't mind if you have to manually push so you know your using your data plan, I'm unlimited so I don't care, I just want to be able to push. I think I can use one of the added streams but if I can use those why not the main stream?
Come on Apply fix this.

It's on and I believe I receive the photo stream when on Cellular but it won't send and I'm 99% sure this is by design.
This is really stupid on Apples part and I love Apple. Don't flat out block photostream sending when on Cellular, have a switch so it's the users choice. Sure by default set it to no but once we set it to yes then it's our choice. I have no problem popping up a box askting us if they are sure we want to do it since it will use more data but darn it give us the choice.

Get rid of the initial asterisk when using PasswordField masking in console

Hi!
How can I get rid of the initial astrerisk when using the PasswordField script from Sun?
I've tried to check whether the BufferedReader is empty or not, but with no succes.
Here comes the code:
PasswordField.java
import java.io.*;
public class PasswordField {
    *@param prompt The prompt to display to the user
    *@return The password as entered by the user
   public static String readPassword (String prompt) {
      EraserThread et = new EraserThread(prompt);
      Thread mask = new Thread(et);
      mask.start();
      BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
      String password = "";
      try {
         password = in.readLine();
      } catch (IOException ioe) {
        ioe.printStackTrace();
      // stop masking
      et.stopMasking();
      // return the password entered by the user
      return password;
}EraserThread
import java.io.*;
class EraserThread implements Runnable {
   private boolean stop;
    *@param The prompt displayed to the user
   public EraserThread(String prompt) {
       System.out.print(prompt);
    * Begin masking...display asterisks (*)
   public void run () {
      stop = true;
      while (stop) {
         System.out.print("\010*");
      try {
         Thread.currentThread().sleep(1);
         } catch(InterruptedException ie) {
            ie.printStackTrace();
    * Instruct the thread to stop masking
   public void stopMasking() {
      this.stop = false;
}

Hello Yajai,
The example program will use the default value for timeout, 10 seconds. To change this, you will have to set the Stream.Timeout value. I inserted this function into the example and set it equal to -1, and the program will wait indefinitely for the trigger signal without timing out. Please see the attached image to how this was implemented.
I hope this help. Let me know if you have any further questions.
Regards,
Sean C.
Attachments:
SetTimeout.bmp ‏2305 KB

Using just the TV screen when using HDMI port?

Hi,
I have the Macbook Pro with retina display and I was wondering how I could use just the TV screen when using HDMI port. I don't want mirroring displays, just one on the TV.

With the TV connected and the MBP plugged into the mains (i.e. not running on battery power) close the lid. The MBP will go to sleep, wake it up with an external keyboard or mouse - which must be connected in advance, or paired in advance if a bluetooth keyboard/mouse.

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

How can i do the upload file function using tomcat library??

how can i do the upload file function using tomcat library??

Did you read the document for the library?
If you can't figure it out, why don't you ask the people who provide the library?
This has nothing to do with JavaMail.

TS2570 doesn't work, still the same problem when using Rapidweaver software. NOT with other software.

i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?

Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. <br />
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file?

I use a 27inch lcd screen. what do i have to do to close the mac book when using the big screen????

i use a 27inch lcd screen. what do i have to do to close the mac book when using the big screen????

Here is Apple's instructions:
http://support.apple.com/kb/ht3131
Regards,
Captfred

Is there a way to adjust the frame length when using a FFT

Is there a way to adjust the frame length when using a FFT?
Thanks,
David

I thought that to have a longer frame rate you just need to have a longer sample set.

Adding a Button in the Application toolbar when using LDB for HR programs

Hi Experts,
I have a requirement to add a new button after execute button in the Application tool bar for the HR programs when using LDB PNP.
Normally when we are using LDB in our program we will get a extra button provided by SAP after the execyte button. When we are creating a new button for this by using the table fields sscrfields with the function key as 2 we are not able to see the new button.
can any one help me in this issue.

please post your relevant coding with respect to the button
A.

Why is the response time when using clickwheel...

I've bought a new 60gb video and, in comparison to my 20gb 3rd generation, the response time when using the clickwheel (next track/pause/play/bak track) is annoyingly long on start-up. And the display takes seconds to catch up with what's playing sometimes freezing with half of the one 'page' showing and half of another. Should I expect this because of the larger capacity/more complex iPod?
Also, in an earlier post I noted that when the iPod first fires up, tracks seem to stop and start - just for a second or so, 3 or 4 times within the first 15 seconds. It's not the track on iTunes as it never happens on my 3g.
Dell Windows XP

Definately sounds like a faulty harddrive.
You could always try restoring it with the most recent updater, and reloading everything - kind of like a fragmented harddrive, I am noticing better performance since I last wiped it clean and relaoded it (due to another error - actually)....

Question about the CSS behavior when using layer 3 sticky and sticky table

Hi everyone,
I have a question about the CSS behavior when using layer 3 sticky and sticky table is full.
If I configure layer 3 sticky and specify the inactivity timeout as below, how does the CSS
handle subsequent needed sticky requests ?
advanced-balance sticky-srcip
sticky-inact-timeout 30
CSS document says that
Note:
If you use the sticky-inact-timeout command to specify the inactivity timeout
period on a sticky connection, when the sticky table becomes full and none of
the entries have expired from the sticky table, the CSS rejects subsequent
needed sticky requests.
My question is what is the next reaction by doing the CSS if the CSS is in the
following condition:
when the sticky table becomes full and none of the entries have expired from
the sticky table, the CSS rejects subsequent needed sticky requests
Does CSS just rejects/drops subsequent needed sticky requests ?
or
Does CSS does not stick subsequence requests to particular service but CSS forward
subsequence requests with round-robin basis ? which means if the sticky table is full,
the CSS just works round-robin load balancing fashion for subsequence requests ?
Your information would be appreciated.
Best regards,

Hello,
There is a good document explaining this on Cisco web site
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note09186a0080094b4b.shtml
It depends if the sticky-inact-timeout is used or not. If not, it's FIFO (the oldest entry in the sticky table is removed). If yes, the CSS will reject the next sticky request.
Rgds,
Gaetan
Rgds
Gaetan

Omit the XML declaration when using the PHP MM_XSLTransform class

Hi
Is there any way to omit the XML declaration when using the
PHP MM_XSLTransform class?
When using the PHP MM_XSLTransform to transform some XML into
HTML, the XML declaration is faithfully delivered, which is
expected. In my case though this ends up in the body of the
document and is not desired. I wish to choose that the XML
declaration is not shown.
I have tried to use the <xsl:output method="xml"
encoding="utf-8" omit-xml-declaration="yes"/> in the XSL
stylesheet but the declaration still appears.
Any help?
all the best
Dave

Jim20005 wrote:
> I'm using XLS transfomation in DW for reading XML files.
Now (I'm just back
> form holiday), my webspace provider has updated to php
5.1.5. I'm getting this
> error:
Comment out line 301 and add two new lines immediately after
it like this:
// $xml = DOMDocument::loadXML($content);
$doc = new DOMDocument();
$err = $doc->loadXML($content);
This is part of a PHP 8.0.2 hotfix that can be obtained
directly from
Adobe support.
David Powers
Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
http://foundationphp.com/

Skype 4.3 maximizes the upload stream when using t...

Similar Messages

Maybe you are looking for