Skype Available Status for Enterprise Use in Web P...

Can I use
http://mystatus.skype.com/balloon/<username> 
to check the various skype status for entrprise use.
Any other service available in skype to check the availability status for enterprise use to be intregrated in a web page.

samiul.haq27

Similar Messages

  • Changing availability Status for event in iCal

    How do I change the availability status for an event in iCal Version 7.0 (1835.1)?

    Hi bubbakwb3,
    Thanks for visiting Apple Support Communities.
    Use these steps to change availability status for an event in Calendar:
    Calendar (Mavericks): Change your availability status for an event
    http://support.apple.com/kb/PH14998
    If the Calendar account you’re using displays your status for an event, you can change the status at any time and still be available to meet during an event.
    By default, Calendar sets your status as free during all-day events and as busy during all other events.
    Double-click the event, then click the event’s date.
    Choose an option from the Show As menu.
    Regards,
    Jeremy

  • Ipad planed for enterprise use - how can we do online support

    Our CEO plans iPads for enterprise use - our critical assumption is: How can we do online support like using teamviewer?
    Teamviewer works just the other way round.
    Any suggestions or better use Windows8-pads?
    Argus

    If being to RC the devices is a requirement, then you won't currently be able to use iOS devices.  On the other hand based on past experience with Windows based devices, I'm not sure the plus of RC capability is worth the possible negatives that have plagued Windows based devices in the past. I'd do some serious suitabilitly testing before I went forward in a major way.  The bottom line is general supportability by IT and usability by end users.  RC, while nice, in my mind and at our organization isn't a requirement.  Your CEO may feel differently. 

  • How do I lock down the new iPAD for enterprise use?

    We are planning to purchase iPADs for Enterprise and give it to a certain department. I would like to know if there is a way to lock it down the iPADs so that individual users can not download any apps on it other than what the IT team puts on the iPADs.
    Thank you for your help and for our time,
    Adana01

    You will have to go to settings - restrictions - on each iPad and disable app installation.
    They will not be able to install apps unless they know the restrictions access password.

  • ICal falls short for enterprise use in an Exchange server environment

    (Cross posting from the "Using Mac OS X 10.6 Snow Leopard" discussion).
    I work at a very large software company on a team of people who all use Macs. We were thrilled to install Snow Leopard and begin using the new Exchange server features in Mail, Address Book and iCal. Sadly, though, some very rough edges on the iCal experience are making many people go back to running Entourage, or even Outlook in Parallels (ugh).
    Specifically, iCal does not allow you to control how and when notifications are sent when you edit an existing event. As a meeting organizer, if you make a change, such as adding a new attendee to a meeting that includes 40 other attendees already, all 40 of those existing attendees get a notification, forcing them to re-evaluate the meeting in their inboxes.
    There is no way to save a draft of a meeting invitation without sending it to the attendees. Often the chore of assembling the correct mix of attendees for a meeting takes significant time. If you are unable to complete the agenda or other planning aspects of the event in a single sitting, you must send the meeting as is, which is not a real option if your respect your colleagues time, because they will be receiving multiple updates to your meeting as you complete it.
    Declining a meeting automatically notifies the meeting organizer without giving the invitee a choice. This also creates a lot of unnecessary "noise" in peoples inboxes. Sometimes it is desirable, but not always- the ability to control notification is a very sensitive issue in the context of meeting etiquette.
    You cannot Reply, Reply All, or Forward a meeting calendar event from within iCal.
    There is no support for rich text in the meeting calendar event's "Notes" field - the field in iCal that is used to represent the meeting invitation email's body text. This strips out meaning and complicates the workflow for attending a meeting.
    Getting people to participate in collaborative work in large distributed organizations is a challenge as it is. We cannot afford to use tools that work against the goal. Apple, please hurry up and provide the rest of the features required to really USE an Exchange calendar client in an enterprise environment.

    "He also wants to get his calendar appointments and address book (contacts), but he doesn't want to use Entourage"
    You need to use GroupCal by Snerdware but we have found it not to be a really good product in our office. The address book has the ability to sync to exchange server many have indicated it doesn't work (Address Book/Preferences/General Tab/Sync with Exchange)
    You could try Thunderbird mail product not used that but I doubt any of the Tasks, To-Dos and Calendar come over...now Entourage used to be horrible with this sync but now with 11.3.6 (or whatever it is now) our users see calendar events, to-dos and the LDAP directory
    Though I am a Mac fan, still in a windows world you cannot be too choosy they should just use entourage for an outlook like product.
    NOTE do NOT go to Exchange 2007 tons of IMAP problems our Mac users are unable to get mail (and yet our Windows Admin could care less)
    good luck

  • New Applications for enterprise use

    I'm not sure if this question has been posted so here we go.
    I'm thinking of creating a application for my client (Large company). I'm being very careful because I want to have some of the secured data from my clients enterprise environment on the iPad. I need to know if anyone out there's done this before, and if so, do you have a intermediate between the clients environment and the ipad, maybe a cloud server or something? If I can figure this out, then I can create lots of applications for this client, as long as we have a secure way of getting the data to the ipad and iphone. Anyone out there done this before?
    MBA, MBP, iMac Mac OS X (10.6.4) iPhone 4, iPad, Macbook Pro, Macbook Air, iMac

    YOur question is probably better asked in the Developer forums:
    http://discussions.apple.com/category.jspa?categoryID=164

  • New application for enterprise use

    I'm not sure if this question has been posted so here we go.
    I'm thinking of creating a application for my client (Large company). I'm being very careful because I want to have some of the secured data from my clients enterprise environment on the iPad. I need to know if anyone out there's done this before, and if so, do you have a intermediate between the clients environment and the ipad, maybe a cloud server or something? If I can figure this out, then I can create lots of applications for this client, as long as we have a secure way of getting the data to the ipad and iphone. Anyone out there done this before?

    YOur question is probably better asked in the Developer forums:
    http://discussions.apple.com/category.jspa?categoryID=164

  • Azure Backup-reviewing Windows 8.1 azure client for enterprise use

    hello, i'm kicking the tires on the Azure Recovery Services Site agent for Windows 8.1. I like it - seems easy.The question I have:
    I notice you have to provide a passphrase.  We would like to test this offering with 10 employees but the management of the passphrase is a bit concern.  Is there a way from an Azure portal (or other method) to get the passphrase of each
    client machine?  as system administrators, we would like to keep a copy of the passphrase in Active Directory, Azure Portal, or some centralize place (we don't want to count on the user to solely hold that passphrase because if they lose it, they will
    be out of luck).
    can anyone speak to that?
    thanks

    Hi,
    There is no automatic way to help protect that passphrase. User should keep the passphrase and not share to others for private consider. If you worried about losing passphrase, you can let users to save it to an external place such as share a folder for
    each user to keep a copy of them.
    See:
    http://azure.microsoft.com/blog/2014/09/11/getting-started-with-azure-backup/
    Note that Azure Backup never maintains the passphrase and if the passphrase is lost by the user, the data can never be restored or recovered. Hence it is strongly recommended that the user saves the key to an external location.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Is it possible to use Citrix for home-use and for free, Only one use?

    Hi
    I am a .Net developer so i need to have Microsoft Visual Studio and Microsoft Windows for my Work, but i like iPad 2 in Tablets so that i bought one, Now in a video i have seen that Citrix is such a professional Desktop and App Virtualization that it seems Microsoft Windows is running on iOS, so i want to use it but not for business and just for home use, is it possible to set it up for free?
    Best Regards,
    PK DEVELOPER

    Citrix does not allow iOS to run Windows. Citrix products are one of several ways to connect an iOS device to a system that does run Windows and allow the iOS device to take control of that Windows system. Citrix, to the best of my knowledge, does not make their back-end products (i.e. the software that runs on the system to which you want to connect) available for free; it's usually quite expensive as it's intended for enterprise use.
    Citrix for home use would almost certainly be vast overkill, though. Just do a web search for "VNC". VNC is a solution for Windows and iOS that would allow you to take control of your Windows system.
    Regards.

  • Enterprise use and E-mail account

    Hi! I was able to delete my old E-mail address. I was about to add my new one however, when I went to my Setup folder, my set up E-mail folder disappeared. I tried using my set up wizard but everytime I press E-mail set up, it says: "Your e-mail account is already activated for enterprise use." I only want to put my gmail E-mail account. Thank you so much

    Another possibilty is that your phone has an IT policy attached to it.
    Here is how to get rid of it.
    remove IT policy - Method 4
    http://btsc.webapps.blackberry.com/btsc/search.do?​cmd=displayKC&docType=kc&externalId=KB14202
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Using weblogic as web server for Enterprise Manager can someone pls help?

    hello,
    can i have your help on this?
    i want to use Weblogic as web server instead of apache in the structure of Enterprise Manager 10g R3?
    have any of you try this? can someone please provide me some link related to how to configure Weblogic as web server for Enterprise Manager.
    Many thanks in advance
    Cheers,
    Cosmin

    You'll probably have better luck posting in the Enterprise Manager forum:
    Enterprise Manager

  • Using Weblogic as web server for Enterprise Manager 10g R3?

    hello,
    can i have your help on this?
    i want to use Weblogic as web server instead of apache in the structure of Enterprise Manager 10g R3?
    have any of you try this? can someone please provide me some link related to how to configure Weblogic as web server for Enterprise Manager.
    Many thanks in advance
    Cheers,
    Cosmin

    Im dont think its possible to do this with enterpise manager (Dbcosole), It might be possible with GRID .. have a look here
    http://www.oracle.com/technology/products/wag/index.html

  • Can you use Crystal Reports for Enterprise to connect to BOE4 over the web?

    Hello,
    When I use Crystal Reports for Enterprise in BI Launchpad when I am connected on the LAN network it works.
    If I connect via the internet, it doesn't.
    I wanted to know if Crystal Reports for Enterprise only works if you are connected to Business Enterprise 4.0 on a LAN network and if it's not designed to work remotely, aka via the internet connection, like you can with Webi?
    regards
    Janetta

    Hello,
    We installed BOE4 on the server, it runs perfectly, no issues.
    Install Crystal Reports for Enterprise on a laptop. It's the latest one as I checked to see if there's any later versions or patches.
    I am able to log into the BOE Enterprise system as administrator.
    Namely I have setup the Server connections per the following:
    Server Name:   <IP address>
    The check box for SSL is unchecked.
    Server Port Number:   nnnn
    Server Context:  /dswsbobje
    System display name:   <my server> External Connection
    User Name : Administrator
    It connects successfully.
    I then go and create a report against a Universe that I can see listed on my BOE 4 server.
    It then comes up with this error message:
    "Unable to Logon: There is a problem logging on to SAP BusinessObjects Enterprise.
    Please check your logon credentials and make sure your nework is properly configured before trying again.
    If problems persist please contact your Administrator."
    Architecture: 
    BOE 4 sits on Windows 2008 Server SP2
    Laptops tried it on are Windows Vista and Windows 2003 Std.
    Thanks for looking into this for me.
    Edited by: Symonds Janetta on Oct 11, 2011 12:05 AM

  • Caflish Script Pro Bold no longer available for desktop use. What changed?

    Caflish Script Pro Bold was available at one time for desktop use. Now it seems to only be for web. I chose this font for our corporate branding and it was used to create business literature like business cards, brochures and product sheets. So we are committed to the font. How can I get this font back?

    Welcome to Apple Discussions!
    Apple has not disclosed their policy decision making to the public.
    I verified that the 7200 RPM hard drive is not available for the 15" from the Apple Store build to order. That's not to stop you from getting your own 7200 RPM for a 15". However, we don't know if the 7200 RPM meets the heat and/or power requirements for the battery to maintain a decent amount of charge when not powered by A/C. There are guides online for do-it-yourself installation on http://www.ifixit.com/ http://www.xlr8yourmac.com/ but there is no guarantee that if a problem happens that the warranty will still be valid. I'd take it to an authorized service technician to have it installed and verify with them they can do it without violating the warranty.
    Also the Terms of Use specifically forbid us discussing policy on this section:
    "2. Submissions
    Search or browse for existing answers before you ask a question. Someone else may have asked your question — it may save you some time.
    Stay on topic. Apple's discussion forums are here to help people use Apple products and technologies more effectively. Unless otherwise noted, don't add Submissions about nontechnical topics, including:
    That Apple rumor you saw on another website.
    Discussions of Apple policies or procedures.
    Speculations/rumors about unannounced products.
    The status of your 1973 MG Midget restoration."
    Now one thing to note, for hard drives larger than 100 GB, which this 7200 RPM is, 5400 RPM drives typically are about the same speed as the 100 GB drive because the tracks are closer together. They don't need the 7200 RPM to keep the same seek times. So consider that before worrying about whether or not the 7200 RPM is available.

  • What's the available value for weblogic.jsp.encoding in web application.

    Hi,
              I'm using chinese windows nt 4.0 and weblogic 5.1 sp6.When I did not set
              weblogic.jsp.encoding to GB2312 , when the jsp file contain's chinese , the
              output will be error .And when I did not set it , the output is correct, but
              when I use request.getParameter("SomeFormElement")(the element inputed
              chinese), the return value is error.
              How should I set weblogic.jsp.encoding value to satisfy all this problem?
              When I set the value to ISO-8859, there is an exception:
              java.io.UnsupportedEncodingException: Charset: 'ISO-8859' not recognized,
              and there is no alias for it in the weblogic.httpd.charsets property. So
              What's the available value for weblogic.jsp.encoding in web application?
              Pan
              

    hi ,
    i think the best way is to create java beans ,in that bean call your EJB ,
    and check the validation over there.
    and make that bean scope to session.
    in each and everypage try to check the session ,if it is not valid then forward to your login page...
    otherwise continue to give access to him like guest
    Regards,
    AfTaB

Maybe you are looking for

  • IPhone mail app is horrible

    Not only is there a yahoo problem, but there is an apple mail app problem.  We all know that yahoo has its issues but I just noticed that after I send an email, I can't see it in the sent folder.  I open the separate yahoo app and I see the email has

  • View option

    View otion of folder option is not working. I use Satellite, model no - L305-S5955. Dr. rakib

  • Where can I get replacement rubber feet for Macbook Pro 2009?

    Does anyone know where I can get the black rubber feet that go on the bottom of a Macbook Pro (2009)? I have checked with Apple stores and they said they don't have them. Thanks for any help you can give me.

  • Nokia 6220 - GPS,Maps,Navigation Question

    This may be a silly question but I'm a little confused over this I am considering buying a 6220 (SIM free), mainly because it's an 'upgraded' version to my existing 6300. The idea is instead of having a SAT NAV (for the occasional trips to places I'v

  • Runtime Error 557

    Hi everyone. I experienced several blue screens over the past few days that Microsoft helped me rectify. All is ok but now I have a message that won't go away: "A Runtime Error has occured. Do you wish to Debug?  Line 557 Error:  The data necessary t