Skype call failed and not sending messages

As the subject says, me and some friends are unable to send messages or make calls this morning. Messages just have the spinning symbol on the right and calls just say call failed. This is on several machine spread around the UK. Any advice is appreciated.

It seems to be slowly recovering now, just a blip in service that no one at skype are acknowledging?

Similar Messages

Why is my phone recieving messages and can make calls but will not send messages? my iphone keeps switching from 1x to 3g also..

my iphone is receiving messages and making calls but will not let me reply back to messages or go on the internet... It does keep switching from 1x to 3g also if that has anything to do with it? any help or people having same problem?

Hi Ashlygyrl - Let's get you back to business! May I have your zip code to reference the area? What model is your iPhone? Please try a soft reset by holding the Power and Home keys to restart device. I am eager to troubleshoot further with you!
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Crackling Call Signal and Error Sending Messages!

Only about a two weeks ago my Iphone has started to have a really bad signal when talking to people from my apartment. I cannot ring out and when people ring me the signal is a nightmare! It even cuts off but the annoying thing is, is that the signal strength and 3g is FULL!!!! My messages usually say sending error failure and i have to turn off the phone off and on to send! I have tried resetting the network settings and resetting the entire phone but nothing!
Why is this happening???

It seems to be slowly recovering now, just a blip in service that no one at skype are acknowledging?

After the ios 7.0.3 update, my phone will not access cellar and thus not send messages... Help??

My phone will not access cellar data and not send messages...

Call your carrier and ask them to chekc your provisioning.

Call Failed, and No Answer

A few attempts to video-call someone whose status icon showed as "available", the green figure with the white checkmark, had failed. The message from the Skype program said, "call failed"; and the feeback message in the list said, "call to personsskypename, no answer". Are these two possibly consistant? The person is online, signed in to his Skype account, is available, is not using skype to communicate with anyone at that moment, but attempt to call him gives, "call failed" and "no answer".?

Thank God I'm not the only one with this issue! It keeps saying call failed when I call two seperate accounts that are linked to the same person. I was worried maybe he was ignoring them or wifi problems, but my text messages get through on Skype (all but photos and files). I am at a loss as to what I should do because this is the only form of communication I have left of the person, since he chages his phone way too often and I don't ave the most recent number AND his Facebook account was deactivated a while ago because it was hacked. If someone finds a solution, could they please tell me ASAP?

Remote procedure call failed and did not execute response after changing contents

Hey Hey!
I have reviewed the other posts related to this issue but have not found a solution.
I have done myself quite a mischief and hope someone here can help me out!
I'm running an old ACER laptop with Windows 7. This PC belonged to an old colleague and therefore all of the folders and user names were still under his name, so I decided to try to change them all to my name. The main issue was the USER folder which had
the locked symbol next to it but it wasn't locked at all. I googled how to delete this folder and one bright spark suggested I create a new folder with my name, copy all of the folders from the other 'locked' user's folder into my folder, and then delete the
old user's folder.
That was fine. All seemed well. When I tried to delete the old folder the computer sat around thinking saying it was 'moving' but not doing anything. So, I cancelled the operation in the Task Manager. When I attempted to open any folder from the start menu
or desktop or task bar I was presented with a bunch of numbers and letters and the message "REMOTE PROCEDURE CALL FAILED AND DID NOT EXECUTE."
I quickly googled the message realising I'd made a major error and the first response was to type in services.msc or something to that effect, so I typed that into the Start Menu search bar and hit enter and nothing came up. So, I tried again, but now I
couldn't type anything into the search bar, I could not even select any programs from the Start Menu.
So, I can't access the Start Menu, search bar, or any of the folders unless I open uTorrent, select open containing folder, and from there I can access what I need.
I'm too afraid to reboot the PC. I can't locate my copy of Windows 7 anywhere. I'm freaking out!!
Before I pour my lowly student wage into getting a professional to fix it, could someone please offer some suggestions??
Greatly appreciated in advance.
Paris, Texas.

Hi,
Based on your description, for this question is more related to NetQueryDisplayInformation() API, in order to get better help, we may ask for suggestions in the following MSDN forum.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Besides, we can try to use a script to get all domain users. Regarding this point, the following script can be referred to as reference.
How to list all active directory users in a particular domain using PowerShell
https://gallery.technet.microsoft.com/office/How-to-list-all-active-0d9be7ce
In addition, for scripts, we can also ask for help in the following forum.
The Official Scripting Guys Forum
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Best regards
Frank Shen

Skype will not send Messages in Windows 10.

Skype no longer seems to send messages after getting a blank error message. The message will enter the chat, however, it will endlessly load until deleted. I'm running the most recent version of Skype for Windows 10 on my desktop. It may be as simple as rebooting my PC, however, trying that, the messages will only send for a few minutes after reboot, before endlessly looping. I am definitely connected to the internet, and I can still make calls. This sis with regular, non SMS messages with a non-premium account.

you have both the answers ! The problem is your outgoing settings in your mail account Contact your carrier for the right settings of the outgoing, or google

This relates to an earlier question I asked: I have an iPhone and can send messages to a galaxy phone but the person cannot receive them; however, I can send them and it sounds like they are sent, but are not received. I can get them from a galaxy.

This relates to an earlier question I asked: I have an iPhone and can send messages to a galaxy, but the person cannot receive them; however, I can receive messages from the galaxy. I have only had an iPhone so the problem does not relate to a change in phones. Up until about 1month ago I could send to the galaxy and they could be read. Help!

Hi there nancyfrompilot mountain,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Back up and restore your iPhone as new.
-Griff W.

On my daughters iPad mini she can not send messages. She can receive them but the send button stays light gray after you type a message. It worked when we first set it up but now it does not. Tried resetting and logging out and back in. With no change.

I can not send messages on an iPad mini the send button stays light gray and will not send. I can receive. I reset and logged out and back inn with no results. It worked fine when we first set it up. Any suggestions?

Hello iMessage issues 1234,
Thank you for the details of the issue your daughter is experiencing with sending messages on the iPad. It sounds like you might have the Subject Field turned on. To disable this go to Settings > Messages > Show Subject Field.
iPhone User Guide - Messages settings
http://help.apple.com/iphone/7/#/iphf2d853e3
If the Subject Field is not enabled but messages are still not sending, I recommend continuing with the following article:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thank you for using Apple Support Communities.
Best,
Sheila M.

Odd issue with message tracking. (User's emails show as SUBMIT and not SEND. No Byte Size) Exchange 2010

Hi everybody.
I had been tasked with tracking down a user's emails.
I ran a script in powershell to export data I could work with.
For some reason this particular user's emails in this time range do not show up as the EVENTID "SEND".
They also do not have a Byte Count nor a list of recipients.
They only seem to show up as "SUBMIT"
Apparently this user has been sending out emails with a large amount of BCCs.
Is there any way to actually see this activity? Why would it be showing up as SUBMIT and not SEND? Why won't it show any recipients or byte count?
Here is my example script.
Get-MessageTrackingLog -ResultSize Unlimited -Server "contoso-ex1" -Start "5/1/2014 12:01:00 AM" -End "5/8/2014 6:40:00 PM" | Select Sender,{$_.Recipients},{$_.RecipientStatus},MessageSubject,TimeStamp, EventId, Source,SourceContext,MessageId,InternalMessageId,ClientIP,ClientHostName,ServerIP,ServerHostName,ConnectorId,TotalBytes,RecipientCount,RelatedRecipientAddress,Reference,ReturnPath,MessageInfo
| Export-Csv .\MessageTrackingLog.csv
Please note that only this one user's emails are showing only as SUBMIT. The rest are mostly SEND.
MCSE 2003, Exchange. MCTS Vista, 7. Administrator of awful, neglected website http://timssims.net

Hi,
I’d like to double confirm the question: This issue occurred only on one specific user in a particular time range.
In other time, the message tracking shows correctly information for this user.
I suggest we check the application log during that time range and see whether there are any related event IDs about this user.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

"Could Not Send Message Using The Server...:

I never have any trouble sending from Apple Mail, except now I am trying to do a mass-mailing for our business. Is there a limit on how many people you can BCC?
For the 1st message I put 200 people in the BCC field, and the message sends fine. Then I setup the another message with the next 200 people, and the send fails. Get a notice that Apple "Could Not Send Message Using The Server SMTPOUT.secureserver.net". And gives me the option of selecting other servers, neither of which work either.
I am curious, are there limits on how many people you can copy on one message?

Most, if not all ISPs and email account providers have similar limits per the following for personal/non-business email accounts as part of an overall effort to eliminate or reduce bulk spam emanating from the ISP's or email account provider's domain.
Any ISP or email account provider that doesn't impose similar limits is helping to contribute to the amount of spam that gets circulated.
.Mac has several safeguards in place to ensure that only .Mac members send messages with the Mac.com outgoing mail server.
Among them are reasonable limitations on:
The number of messages that can be sent each day (200 messages)
The number of recipients that can be sent to each day (400 recipients)
The number of recipients a message can be addressed to at one time (100 recipients)
There is also a 10 MB maximum size for messages sent or received using the .Mac mail system.

My iPhone will not send messages in mail. It will receive mail.

My iphone will not send messages in mail. It will receive messages. Is this a problem with my carrier or is it something in settings. I have reset my password and this does not help I don't know who to call about the problem.

you have both the answers ! The problem is your outgoing settings in your mail account Contact your carrier for the right settings of the outgoing, or google

Blackberry curve (8300) is adding a 1 to phone number in SMS?? will not send message?

I get an error message saying that I need to resend the message w/ a proper 10 digit number... Which I have in my address book, but then the phone will add an extra 1 to the #, making it 11 characters, and thus not sending messages.... I have looked through both phone and SMS options and have found nothing that helps.. I have turned off the country code in phone options, resent the SMS, and still had the same problem. then I took the area code off and the same thing still happened. Please help b/c I cannot text my gf at the moment????!!!
also, it adds a 1 to only certain phone numbers. i can text almost everybody else just fine, apart from like 3-4 people.
thanks in advance,
~Andrew~

Try http://supportforums.blackberry.com/t5/BlackBerry-Storm/Menu-Key-not-working/td-p/151422
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed

FM SSF_CLOSE failing and giving error message while printing a smartform

Hi,
for language spanish the smartform is not getting printed for output type SG11 but for english it is getting printed? What could be the reason? I debugged and found that SSF_CLOSE is failing and giving error message.
Thanks and regards,
AP.

Hi Aparajita,
for changing from one languages to another translations in SE63 is to be done, either search on SCN for using SE63 , or atleast see these wiki help .
Transaction SE63 - Translation Tools for Translators (BC-DOC-TTL) - SAP Library
Transaction SE63 (SAP Library - Translation Tools for Translators (BC-DOC-TTL))

TS5185 My IPAD will not send messages to non APPLE users.

Today, Christmas Day, while trying to send a message my IPAD wanted me to turn on iMessage. There was no option not to do this. After it was turned on I could no longer send messages to non Apple users. After reading online that I could set send SMS on my IPHONE I did. Now I guess it send everything as an SMS message. Now my IPAD will not send messages to non Apple users. I guess Apple wants us to pick our friends only if the use Apple products. This is about as stupid as it gets. They want us to only communicate with Apple users. The only other option is to turn the feature off. Why have iMessage in the first place.
So my situation is I can send SMS Messages on my IPHONE. I cannot send any messages to non Apple users on my IPAD and iMessages to my Apple users.
This kind of stupidity is why I switched from Windows to Apple in the first place. Don't they test anything out anymore at Apple?

Please don't take this the wrong way, but I think that you might be doing something wrong.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
On your iPhone:
Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.

Skype call failed and not sending messages

Similar Messages

Maybe you are looking for