Skype Cannot detect webcam

My skype just recently started to be unable to detect my webcam, which is working fine and even works when tested on websites. Can someone please tell me how to fix this issue? I have attached the DXdiag zipped below
Attachments:
DxDiag.zip ‏13 KB

What exactly is your currently installed Skype version? In Skype go to Help -> About Skype.

Similar Messages

  • Skype not detecting webcam. Again.

    So, I had this problem a while ago and downgrading to an older version of skype fixed it.
    Now, however, I was forced to upgrade to the latest version of Skype again because it would no longer connect with the older version, and ust like before it refuses to acknowledge that I have a webcam.
    Using windows 7
    Latest version of Skype
    Updated drivers
    USB 2.0 UVC 1M webam (built in)
    Solved!
    Go to Solution.

    inga-krang wrote:
    Помогите , пожалуйста, камера без драйверов, в устройствах есть, работала почти год и вдруг перестала, в настройках комп ее видет. Собеседника я виже, а он меня нет, что случилось и как исправить. Спасибо.
    Please,  run the DirectX diagnostics tool (32-bit version).
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Skype cannot detect camera any longer

    Can someone help me with a problem?
    This morning I am getting a message that there is no camera attached to my skype.
    Can someone help me fix this it was working a few days ago.

    Please,  run the DirectX diagnostics tool (32-bit mode).
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Skype Can't Detect Webcam

    hi i am using skype and suddenly my webcam stop works even the webcam marks gone i dont know what to do??even whe i touched the video call button its shows skype cant detect my webcam . what to do???thanks in advance

    Please,  run the DirectX diagnostics tool. Go to Windows Start  and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

  • Help Connect me phone adapter cannot detect phon...

    Hi there,
    I recently bought Freetalk Connect Me phone adapter through Skype website. When I hook up phone line, ethernet and wall line as instructed, the setup wizard successfully detect my internect connection. However, it cannot detect my wireless phone. I tried another wireless phone but it failed again. I try to replace my existing voip to skype so I'm pretty sure my phone works well. During the initial setup, I saw the red light goes to flashing green light while trying to detect my phone....then it goes to red and repeat again.
    Does anyone have this problem before? I try to locate Freetalk customer service number, but they don't have one.
    JJ

    Plese also see this: http://community.skype.com/t5/Other-devices/Use-Your-Own-Phone-Device-Router-Based/td-p/123156
    About Me You can also use a IP Camera as your camera for Skype video Example Instructions

  • [partly RESOLVED] Skype problems with webcam

    I bought Omega C91 webcam (t works on uvcvideo driver). It worked out-of-the-box with all camera applications, except Skype. In Skype options i have my camera on list ("Vega USB 2.0 Camera (/dev/video1)"), but clicking on "Test" causes
    Skype Video Capture: Cannot open device '/dev/video0': Nie ma takiego pliku ani katalogu
    Starting the process...
    Skype Xv: Xv ports available: 0
    Skype XShm: XShm support enabled
    in console and no image.
    Last edited by Dinth (2009-06-06 16:14:16)

    Damnshock wrote:
    You can always make an alias
    alias skype="LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype"
    Hi
    I was having the same problem with my webcam and skype ,ie, the webcam was recognized but there was no picture/video. After running the above command and pressing 'Test' webcam in skype I got the following trace.
    LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype
    Starting the process...
    Skype Xv: Xv ports available: 0
    Skype XShm: XShm support enabled
    libv4lconvert: Error decompressing JPEG: unknown huffman code: 0000ffff
    libv4lconvert: Error decompressing JPEG: unknown huffman code: 0000ffff
    libv4lconvert: Error decompressing JPEG: unknown huffman code: 0000ffff
    libv4lconvert: Error decompressing JPEG: unknown huffman code: 0000ffd9
    libv4lconvert: Error decompressing JPEG: unknown huffman code: 0000ffff
    libv4lconvert: Error decompressing JPEG: unknown huffman code: 0000ffd9
    libv4lconvert: Error decompressing JPEG: unknown huffman code: 0000ffff
    libv4lconvert: Error decompressing JPEG: unknown huffman code: 0000ffff
    libv4lconvert: Error decompressing JPEG: unknown huffman code: 0000ffff
    Aborted
    Any ideas?
    Thanks

  • TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

    Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
    This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
    1. The phone charges it's battery
    2. I can open it in My Computer and import/export media files.
    In iTunes
    3. It start to sync until step 3 then stops.
    4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
    I hope you can provide me a solution for this problem.
    Thanks,
    Ralph

    Hi ralphagir,
    Welcome to the Apple Support Communities!
    For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Remove iTunes and related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
    Safely disconnect iPod
    http://support.apple.com/kb/HT1853
    Have a great day,
    Joe

  • I cannot detect my wireless hp desk jet 3520 printer, I cannot detect my wireless hp desk jet 3520 printer

    I cannot detect my wireless HP desk jet 3520 printer from my iPad? 

    I can't find an Arris router with that model number, are you sure it is not a TG862?
    Regardless, Arris routers are known to either be incompatible with Bonjour or have problems with Bonjour packets hence Airprint will not work. Check with Arris' website and see if there is a firmware update availble for your router for Bonjour/Airprint compatibility and install it or switch out your router.

  • When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased music not on this iphone" it tells me "All of your a

    When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased > music > not on this iphone" it tells me "All of your available music has been downloaded to this device." However, my purchases are not yet downloaded to the iphone and not available to download. If I go to "purchased > music > all > recent purchases" it will show me the purchases that were most recent the last time I synced my phone, but not the purchases since then.
    Any thoughts on how I can remedy this and make all of my purchased music available on my phone without requiring syncing?
    iPhone 4

    So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
    Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
    Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

  • My itunes cannot detect my ipod touch 5g. How do I fix this?

    My itunes cannot detect my ipod touch 5g. How do I fix this?
    All I know is that my itunes has not been updated. If this is the problem, I tried to close and reopen the program but the "update" popup isn't popping up anymore and I'm not sure where I can manually update it myself.
    Please help!
    Thanks

    The 5G (iOS 6) require 10.5 or higher
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later7 (free download from www.apple.com/itunes/download)

  • Office Network cannot detect MBP

    Hi,
    My office is using Windows Server. I managed to connect to my server drives but the centralised printer and scanner cannot detect my MBP in the configuration setting. Without being detected on the centralised scanner, I cannot scan documents to my MBP.
    Thanks.

    Hi,
    My office is using Windows Server. I managed to connect to my server drives but the centralised printer and scanner cannot detect my MBP in the configuration setting. Without being detected on the centralised scanner, I cannot scan documents to my MBP.
    Thanks.

  • Mail is not working properly (cannot replay), and skype cannot be answered

    Did the verification, repair and installation disk of Mac. Why mail is not working properly (cannot replay), and skype cannot be answered?

    I most often do not restart my new MBPro .... 10.9.5 .....  but happened to a day or so ago, and it immediately began to block / problem with email .... I waited to see if it sorted out, but no .....
    I get he server “p06-imap.mail.me.com” cannot be contacted on port 993 .....     then deselected SSL and that did not help, so went back and selected it again .... and again not working .....
    I can see my stuff "online" but I do not want to do it that way EVER ..... 
    your "deselect mail" in ICloud preferences    ....   did nothing good for me .... any other thoughts Linc ??   in fact, some hundreds of in and sent emails did not show up .... I'm hoping they are going to when this gets fixed .... but hey, .....  right now I'm NOT in business ....
    thanks

  • My v3753au (32bit win7) bios cannot detect internal dvdrom & hard to detect internal hdd?

    hi...
    my v3753au is wonderfully running on 32 bit win7.  lately the bios cannot detect the internal dvdrom & kinda hard to detect (longer than usual) the internal hdd during startup.  i've tried with the other dvdrom & it's still the same.  however, the one that i used is still ok on other laptop.  fyi, i've tried with the original f.15 version as well as the latest f.28 version but both let me down.  when win7 runs, dvdrom doesn't appear either in win explorer or device manager.  i've also checked the registry for that filter thing but it isn't there.  any suggestions of what should i try next?
    tq for the help...

    > I couldn't reinstall/recover new system from CD cos Win7 couldn't detect any drive while installing.
    Its no matter if the SATA mode is set to AHCI or compatible mode. The HDD should be recognized by BIOS even if the AHCI mode has been selected.
    At the first BIOS page the HDD should be listed with the name and size.
    If it isnt the case, it could be possible that your HDD controller is faulty.
    What HDD did you purchase exactly? Is it a 2.5 SATA HDD?

  • Camera Window pops the message "Cannot detect Camera, Check connection to camera, then retry"

    I have installed Camera Window in my Windows 8.1 laptop. The moment I invoke Camera window, there is a popup which shows . "Cannot detect Camera, Check connection to camera, then retry. I do not have this issue in my iPAD though. Has anyone come across this issue..?Thanks

    zebah_alfred,
    Please make sure you have the latest versions of the software installed by downloading them from our website.  Please click HERE to go to the download page.
     1.  Are you connecting to your computer with a USB cable or over Wi-Fi?
     2.  Are there any other devices connected to your computer other than the camera, aside from a keyboard and mouse of course?
    If this is a time sensitive-matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth

    I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth, because when i click the wireless in settings there are no choices... but when i use the mac os, everything is fine, the wifi, the bluetooth everything is functional, can you help me fix this problem? help will be much appreaciated.. thanks

    How did you install Windows? Did you use Bootcamp Assistant or did you use a virtual machine like Parallels, Fusion, or VirtualBox.
    If you used Bootcamp Assistant, did you download and install the Windows Support software (drivers) in accordance with the Bootcamp instructions?

Maybe you are looking for

  • APEX with Best database combination

    hi experts I am going to use Apex 3.2 Over Oracle XE. But due to some of my friends said its not a best combination so i am confused. Now i would like if anyone can tell me what is the best possible choice of database ? 10G, 10G Lite or XE do I use m

  • BrGui download

    hi all, I try to find the path in order to download the "brgui". I have already the file on my computer but i want to kno where i had found it.(dont remenber where i have found it) The file i have is: BrGui640_7_EN.zip. I have find lot of thing on th

  • New MBA arrives damaged (with a little suggestion for Apple)

    Hello, everyone!  Hope you have a wonderful Monday. I ordered a new 13'' MBA with 8G RAM on 6/21, and it had to be shipped from China. Today, I was first notified that my MBA was ready for pickup at Apple store. But later I was informed it's damaged

  • Mail Behavior has changed!

    I do not know which button i pressed while using mail ... now when i start mail i have no preview of mails! I have top double click on every email to read it! Can someone please help me! Thanks

  • Suddenly unable to save attachments

    I use Mail 2.1.3 Suddenly I am no longer able to save attachments by clicking "save". If I doubleclick on the attachment I receive a message telling me I cannot open unless I download. I click download but nothing happens. I don't understand. Appreci