Skype Click to Call Not Working for Landlines and ...
Hello,
I am trying to use Skype Click to Call, but it does not seem to be working. I was able to call contacts using callto://CONTACT_NAME, but the second I try to call any mobile or landline number (I.E. - callto://9731234567), it does not work. Skype will come up, but it will not make the call. I am running on:
Windows XP - 2002 Version
4 core Pentium processor (1.7 GHz)
256 MB of RAM
Google Chrome
If anyone could provide any insight or ideas, I would really appreciate it. I have already tried a large number of things to fix this issue. Thank you so much for any help!
Sounds that you have installed a Firefox Beta release and thus are on the beta update channel, see Help > About.<br />
The Beta update channel receives an update twice a week.
You need to install the current release to switch the update channel to release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 27: http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
Similar Messages
-
Skype number is suddenly not working for me and my...
Skype number is suddenly not working for me and my colleagues to RECEIVE outside calls. Any ideas?
When I try to call my skype from my cell, it doesnt ring on either end. It appears connected on the cell phone since the counter clock for the call is increasing, but it doesnt ring or connect.
This is the same for me and at least 2 of my colleagues. It was working all day, till suddenly it did not.
When outside people call, it just gives us a missed call or voicemail email, but does not show a missed call on our skype.
When I call an outside number from skype, it connects.
Thanks for any help ASAP!I think this might have been happening to me earlier. If you wait like 30 seconds when you called a machine said "All circuits are busy. da da da". I was looking for an answer and google only brought stuff from like 2010. It's working now after an hour or so.
Sucks cause I use skype for work and was desperate to find a quick reponse but couldn't. -
Click to Call not working for user.
I have a user with Click to Call 8 installed on Windows 7 64-bit. It's worked fine for the last month, however a few days ago it stopped. When we open preferences and update his username/password, clicking on the Phones tab fails to pull any extensions now. However, if I enter my credentials it pulls my extension immediately.
I have tried uninstalling, reinstalling, changing his password, nothing seems to work.
Any ideas?
Zak LylesHi I have the same problem.
I'm running Windows 8.1
Click to Call used to work on this PC until a resent Windows update happened.
I am using Skype on the Desktop client applications.
I can see that Click to Call in installed in my browser IE11.
My webpage phone numbers have the little skype s next to them and they look like hypelinks but if you click on them nothing happens.
I've uninstalled and reinsalled Click to Call ... no change.
Is there a fix? -
Click to call not working with Firefox 31 in Windo...
Hello All,
I have a problem with Click to Call in my new computer.
Windows 8.1
Skype 6.20.0.104
Click to call 7.3.16540.9015
Firefox 31
Click to Call not working with Firefox.
With IE11 it ok.
When I directly copy the URL "skype:+48xxxxxxxxx?call" into address field of my Firefox, then automatically opening Skype with only 1 window- contacts, but not opened window with call phone, and not started to call.
When I do this same in IE11 , Skype opened 2 windows ( contacts and call phone) and start call to phone number.
I don't know why. because in my second computer ( this same Firefox, Skype, click to call) but Windows 7, Click to Call working with Firefox.
Please help me.
Maybe someone have a solution ?
Best Regards
Jarek
ps. Sorry for my englishSounds that you have installed a Firefox Beta release and thus are on the beta update channel, see Help > About.<br />
The Beta update channel receives an update twice a week.
You need to install the current release to switch the update channel to release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 27: http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox. -
Click to Call not working on WIndows 8
Having issues with Windows 8.1. I have successfully installed C2C on-top of Skype 7.3.0.101 (which should be the Desktop version??); Phone numbers are properly highlighting in Firefox (37.0.2). When I click the "Call" link the Skype dialogue box opens (not always to "Call Phones" screen) and ......... just .... sits ... there. The phone number is not populating Skype (see below), let alone dialing anything.
Since Windows 8.1 came pre-packaged with Skype, and there appears to be an indicator (See highlighted below) "[2]" I was wondering if there is a conflict beween two versions of Skype (the Desktop I installed and the Windows 8.1)?
Thank you all in advance for your assistanceDid you enable number highlighting by clicking on the Skype icon in your Safari toolbar? More information here: https://support.skype.com/en/faq/FA801/what-is-skype-click-to-call
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
Skype click to call interferes with HTML cut and p...
FYI - I had to remove Skype click to call from my PC because it disables my ability to cut and paste HTML to microsoft word.
Please fix this, thanks.Me too! I thought it was a Google Chrome problem. I even rebuilt my laptop over it and spent a whole day on the phone with Geeksquad! I just uninstalled Click-to-call and now the problem is gone.
This is a really big deal, people use copy/paste all the time and expect the formatting to work. I'm telling everybody to uninstall click-to-call and/or don't install it in the first place. I hope somebody gets serious and fixes it. And, Skype will have to acknowledge the problem and tell me it is fixed before I will give click-to-call another shot.
Not trying to be a jerk - that is just the truth of it. -
Select All in a table does not work for Drag and Drop
Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-EdFrank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed -
Multi-site Webdialer/Click to Call not working
Hello pros
I have a CUCM 7.1 deployment with 50+ sites. I got Click 2 Call and Webdialer to work on the central site, but trying to start a call from a phone that is not on the main site does not work. I guess is related with some filtering access/list on the path... Before checking routers and switches access lists like crazy, I would like to know which ports CUCM uses to control the IP phone and which ports would use the phone to answer to those requests. ¿Can anyone give me a hand with this? I haven`t found it on the documentation.
Thanks in advanceHello Inder,
Thanks for your input. However Im not sure if 8443 is all I need, communciation between Click2Call and CUCM seems to be fine. I´ll explain what I got.
PC in central site, phone in central site WORKS
PC in remote site, phone in remoet site FAIL
PC through VPN (bypassing WAN restrictions), phone in remote site FAIL
PC through VPN (bypassing WAN restrictions), phone in central site WORKS
PC through VPN (bypassing WAN restrictions), IPC in same PC WORKS
So the problem seems to be between CUCM and Phones in remote sites...
Please share your thoughts
Thanks again, pros -
Hello,
I am running a samsung netbook with 32 bit Windows 7 and IE 9.
I have downloaded click to call and can see it as enabled in the IE list of add-ons, however it does nothing.
At no stage do I get any phone number highlighted on any website.
I keep Skype up to date and have redownloaded click to call several times but to no avail.
It works on my PC and old laptop, just not this one.
Help please!Try this.
a) Click Start.
b) In the search box type cmd
c) Right click and select Run as administrator.
d) Type the following commands and press ENTER.
cd\
cd C:\Program Files\Skype\Toolbars\Internet Explorer
regsvr32.exe skypeieplugin.dll
Restart your PC.
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others. -
Action Script 3 code not working for start and stop button?
Ok so I have this simple animation I created of a circle that moves from one side of the stage to the other. I have added a new layer and called it buttons. On this layer I have added 2 buttons. One for start and another one for stop. The purpose is to get my circle to move from one side of the stage to the other but be able to use my buttons so that I can start and stop the animations at random times during playback. I fixed all my compiler errors now the problem lies in that everytime I click the start or the stop button I get an output error. I have a 3rd layer in which is titled actions and this is where all my code is posted. I removed that layer and placed my code in the first frame of the buttons layer to see if this would change anything but I still get the same output errors. So I just added back my actions layer. What could I be doing wrong? I have made sure to name all my movie clips and buttons correctly and I even added an instance name to them.
Here is my code and the errors I am getting when I press the play and stop button on test-
start_btn.addEventListener(MouseEvent.CLICK, startCircle);
stop_btn.addEventListener(MouseEvent.CLICK, stopCircle);
function startCircle(e:MouseEvent):void{
circle.play();
function stopCircle(e:MouseEvent):void{
circle.stop();
green_btn.addEventListener(MouseEvent.CLICK, greenCircle);
red_btn.addEventListener(MouseEvent.CLICK, redCircle);
function greenCircle(e:MouseEvent):void{
circle.play();
function redCircle(e:MouseEvent):void{
circle.stop();
Here are my output errors-
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at exercise2_fla::MainTimeline/redCircle()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at exercise2_fla::MainTimeline/greenCircle()ok so my circle is my movie clip and it is titled circle and the instance name is circle. Am I supposed to change MovieClip to circle? I put the code at the top of my actions script but for some reason it did not work. I did change play to stop and it got the movie clip to stop when I do test movie but my buttons still do not work. So I changed stop back to play. Strange.
I did try changing MovieClip to circle but that did not work so I did Circle with a capital C and that did me no good eigther.
I meant to add that I did get an error that said- 1180 Call to a possibly undefined method circle. -
FormsCentral PDFs not working for Linux and Unix users
I recently created a PDF (using Indesign > Acrobat IX Pro > Formscentral [AFC]) that includes radio buttons, form fields, linked videos set to play in the PDF once clicked and (after running through AFC) a submit button.
The form has been distributed and we have already had hundreds of successful responses collected in the AFC site, all is working well there.
One major problem we are having is that we have a lot of Linux/Unix users and the response from them is that they can't activate the videos, the form fields are out of kilter alignmentwise and the submit button does not work. Even when using the proper Adobe Acrobat Reader (v9, for example).
Is the Adobe development team aware of problems such as these for Linux/Unix platforms and is there a suggested fix that they know of?
The link to the actual file is here: http://cms.iopscience.iop.org/alfresco/d/d/workspace/SpacesStore/b5a48eac-8642-11e2-8cf8-e 50acbc9fd86/NJP-Video-Abstracts-Competition-2013.pdf
Thanks in advanceHi Jesse,
can you email me ([email protected]) the original PDF (before you imported it in FormsCentral)? Also, I'm curious about the format of the video in the PDF. Does the video in the PDF worked in Linux/Unix before going through the FormsCentral import/export?
When I look at your PDF on my Red Hat Entrprise Linux 6.0 system with Reader 9.5.4 it does look fine (location of the fields) but the video generate an error (which I'm still investigating). I have not yet try the submit button on your form (as I don't want to submit bad data to you) but I seem to have an issue with the submit button on other PDF forms I generated (when I try to submit from a linux machine). Still investigating that as well.
Gen -
This is really perplexing to me, and the first time I have experienced something like this that I can't figure out.
I have a iphone 4 that I recently bought used, is out of warranty, have no recourse with the seller of the phone, and I have run into an issue with the mics.
Before I changed the screen, the guy I bought it from said he had an issue with both mics not working as well. Well, after changing the screen and getting it all back together, I "reset and erased all data", and everything seemed to work fine....then after a day or two, they stopped working again.
Long story short, I have since tried fresh installs of ios7.0.3, "erasing and resetting" many times, and even put headphones in and out of jack, AND changed the audio jack/volume flex TWICE, but to no avail...no matter what, I get the same thing:
Bottom mic:
1. Voice Memo always works
2. Voice Control does pick up my voice, but seems to hear the wrong commands
3. Mic does NOT work during regular calls
4. Mic DOES work for calls with Viber
Top Mic:
1. Facetime works every time
2. Video Record works every time
3 Mic does NOT work during regular speakerphone calls
4. Mic DOES work during VIBER speakerphone calls, EVERY TIME.
a couple while testing speakerphone and regular calls, I blew and sucked air in and out of the top mic while in a speakerphone call, and it would "break through" on the other end for a second or two, occasionally....so now I'm thinking maybe both mics are just messed up, and I should replace them?
This is frustrating the !@#$ out of me, and I really hope someone can shed some light onto this deal.....Thanks in advance for any help with this one!This is really perplexing to me, and the first time I have experienced something like this that I can't figure out.
I have a iphone 4 that I recently bought used, is out of warranty, have no recourse with the seller of the phone, and I have run into an issue with the mics.
Before I changed the screen, the guy I bought it from said he had an issue with both mics not working as well. Well, after changing the screen and getting it all back together, I "reset and erased all data", and everything seemed to work fine....then after a day or two, they stopped working again.
Long story short, I have since tried fresh installs of ios7.0.3, "erasing and resetting" many times, and even put headphones in and out of jack, AND changed the audio jack/volume flex TWICE, but to no avail...no matter what, I get the same thing:
Bottom mic:
1. Voice Memo always works
2. Voice Control does pick up my voice, but seems to hear the wrong commands
3. Mic does NOT work during regular calls
4. Mic DOES work for calls with Viber
Top Mic:
1. Facetime works every time
2. Video Record works every time
3 Mic does NOT work during regular speakerphone calls
4. Mic DOES work during VIBER speakerphone calls, EVERY TIME.
a couple while testing speakerphone and regular calls, I blew and sucked air in and out of the top mic while in a speakerphone call, and it would "break through" on the other end for a second or two, occasionally....so now I'm thinking maybe both mics are just messed up, and I should replace them?
This is frustrating the !@#$ out of me, and I really hope someone can shed some light onto this deal.....Thanks in advance for any help with this one! -
Push mail is not working for gmail and hotmail on ...
i have been using my nokia e72 since february 2011. i had two mailbox configured, gmail and hotmail. Until last week, everything was fine. but suddenly my push mail stopped working for both gmail and hotmail.
when i noticed this, i removed both of my mailboxes and tried to create a new one. when trying to create a Gmail mailbox, it goes fine upto "downloading terms". after that, when i choose to connect to "nokia messaging service", it creates a mailbox named "HOTMAIL" instead of "GMAIL". it takes only my user name for Gmail and rest of the settings are for HOTMAIL.
if i choose not to connect to "nokia messaging service" then it works quite well. but thats not real push mail. it will check my email every 5 mins. but when tried to create a "HOTMAIL" mailbox, i had no luck. no matter how i try, hotmail mailbox can't download my mail. and as hotmail don't support IMAP, its very disgusting to use "POP3" if i choose not to connect to nokia messaging.
i have tried to reset the phone using *#7370# and *#7730#, but no luck. i also tried reinstalling the firmware using ovi suite, but i didn't had any luck either.
please help me, i am very disappointed with this kind of problem specially from nokia.
someone please do help. i m in a huge mess.delete the account and re-add it.
-
Pinyin not working for Mail and some other APPs
Hi all,
Now the Pinyin panel (in which one chooses characters) does not show up at all when I try to use either built-in Pinyin simplified or Sougou Pinyin, in Mail and for example Tencent QQ.
It seems that there is no reaction whichever key I press. Cmd+space to switch methods always work.
However, all Pinyin input methods work in Safari and other cases in web browsing.
And the US English input works fine.
Does anyone have any ideas? Appreciate!
Cheers,
YiIf you don't get an answer here, you can also try
https://discussionschinese.apple.com
or
https://groups.google.com/forum/#!forum/chinesemac -
Adb sync not working for commsync and outlook connector after Patch 122793-
Hello,
I have opened the case 71038740 for this problem.
We have upgraded communication express:
v6.3-4.01 (Patch 122793-17,) ==> v6.3-11.01 (Patch 122793-24)
Communication Express seems to work fine but the adb
synchronisation for outlook connector and commsync does not work anymore.
The errors that we have are:
[13/May/2009:10:03:02] info (13176): for host 10.194.1.7 trying to
GET /abs/search.xml, service-j2ee reports: PWC1412: WebModule[]
ServletContext.log():ERROR PagedSearchResultHdler.expand: couldn't
stop search: 6 : The parameter provided is invalid : stopSearch:
null searchID
[12/May/2009:19:01:59] info (13176): for host 10.194.1.7 trying to
GET /abs/s
earch.xml, service-j2ee reports: PWC1412: WebModule[]
ServletContext.log():ERROR
PagedSearchResultHandler.expand: searchBook returned: 2 : Invalid
entry : psea
rchBook: invalid bookEntryID
Looking at a specific session we also have:
13/May/2009:10:49:21] info (13176): for host 129.194.17.75 trying
to POST /wabp/get_servertime.wabp, service-j2ee reports: PWC1412:
WebModule[] ServletContext.log():TRACE Warning:getDBHandler - Can't
open Personal Store : DBHandler: couldn't open configuration file at
/var/opt/SUNWuwc/WEB-INF/domain/unige.ch : PropertyReader: config is
not a file:
/var/opt/SUNWuwc/WEB-INF/domain/unige.ch/personalstore.properties
It looks like it is trying to opening
domain/unige.ch/personalstore.properties instead of
domain/personalstore.properties.
From what I see, we did not have this error in the previous version.
What is weird, that adb seems to work fine in uwc web interface.
I add the http dialog for the ones who may help me to debug:
POST
/wabp/login.wabp?authOnly=true&appid=Sync3.0&now=510312&fmt-out=text/xml
HTTP/1.1
Content-Type: application/x-www-form-urlencoded
User-Agent: XCPCSync
Host: webcalendar.unige.ch
Content-Length: 35
Connection: Keep-Alive
Cache-Control: no-cache
username=xxxx&password=yyyy%2BtempoHTTP/1.1 302 Moved Temporarily
Server: Sun-Java-System-Web-Server/7.0
Date: Wed, 13 May 2009 11:37:15 GMT
Cache-control: private
Location: http://xxxx.unige.ch/
Set-cookie: JSESSIONID=332E08F023EEA394567DC0E77D989FF9; Path=/
Content-length: 0
Content-type: text/html
GET / HTTP/1.1
Cookie: JSESSIONID=332E08F023EEA394567DC0E77D989FF9
User-Agent: XCPCSync
Host: xxxx.unige.ch
Connection: Keep-Alive
Cache-Control: no-cache
HTTP/1.1 200 OK
Server: Sun-Java-System-Web-Server/7.0
Date: Wed, 13 May 2009 11:37:15 GMT
Content-type: text/html;charset=ISO-8859-1
Content-length: 157
<script>
window.location="/auth";
if (window.location.protocol != "https:") {
window.location = "https://" + window.location.host;
</script>
POST /wabp/get_servertime.wabp?now=515546&fmt-out=text/xml HTTP/1.1
Content-Type: application/x-www-form-urlencoded
User-Agent: XCPCSync
Host: xxx.unige.ch
Content-Length: 0
Connection: Keep-Alive
Cache-Control: no-cache
Cookie: JSESSIONID=332E08F023EEA394567DC0E77D989FF9
HTTP/1.1 200 OK
Server: Sun-Java-System-Web-Server/7.0
Date: Wed, 13 May 2009 11:37:20 GMT
Content-type: text/xml;charset=UTF-8
Transfer-encoding: chunked
5c
<?xml version="1.0" encoding="UTF-8" ?>
<wabp errorcode="0" servertime="20090513113720Z" />
0Here is the debug log from the communication:
56:21 Open sync engine
56:21 Client login date/time : 15.05.2009 08:56:21
56:21 Version : 2.0
56:21 Version 3.1.2008062313 (EN)
56:21 Built from: /trunk
56:21 Product ID: 209-101
56:21 User: XXXX
56:21 Company: UNIGE
56:21 day 15 : hour 6 : min 56 : DST 0 : GMT (Greenwich Meridian Time)
56:21 day 15 : hour 8 : min 56 : DST 1 : Local time
56:21
59:17
59:17 Performing Normal Sync of 'Contacts'. Sync Status before performing synchronization:
59:17 App1 : 'Contacts', Trans1 : 'Sun'. App2 : 'Contacts', Trans2 : 'MSOl'. ContractId : 131073 , App1Id : 6 , App2Id : 9
59:17 Status before Sync - SrcRecId : e1213fd3c71c35d , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC5644612000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : 20090514155311Z , DstModInfo : 2009/05/14 15:52:08
59:17 Status before Sync - SrcRecId : e11dba338af2e2d , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56843B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338b44e2e , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56643B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338ab0e2c , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56443B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338bbae30 , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56243B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338c03e31 , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56043B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338b80e2f , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56E43A2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Enter CWABP::SendCmdToServer
59:17 CWABP::SendCmdToServer - https://xxxx.unige.ch:443/wabp/login.wabp?authOnly=true&appid=Sync3.0&now=743093&fmt-out=text/xml
59:18 CWABP::SendCmdToServer - Post success Response:
59:18 Exit CWABP::SendCmdToServer
59:18 Enter CWABP::GetWABPAttribute - doc Datat
59:18 CWABP::GetWABPAttribute - doc Element attribute text
59:18 CWABP::GetWABPAttrib - invalid Tag Name errorcode
59:18 Non zero error code returned in WABP
59:18 Enter CWABP::GetWABPAttribute - doc Datat
59:18 CWABP::GetWABPAttribute - doc Element attribute text
59:18 CWABP::GetWABPAttrib - invalid Tag Name rawmsg
59:18 The errorMsg returned is :
59:18 Exit CWABP::CheckErrorCode -Error = .
59:18 Exit CWABP::Login. Error =
59:18 CRSunTransContact::LoginWABP - Unable to login
59:19 Enter CSunTransUtil::Configure
59:21 Enter CRSunTransBase::GetFirstErrorMessage
59:21 Exit CRSunTransBase::GetFirstErrorMessage
59:21 Enter CRSunTransBase::GetNextErrorMessage
59:21 CRSyncUtil::FeedProfileShim2Trans : SetTranslatorProfile Not Supported
59:21 CRSyncUtil::FeedProfileShim2Trans : returns 0
59:21 CRSyncUtil::LogFatalTransError : 'GetFirstNewId()' API of 'Sun' translator for 'Contacts' application returned empty error
59:25 Sync completed at 08:59:25 AM on 05/15/09
Maybe you are looking for
-
How to supress a UI popup at the time of Service start up in solaris-10
Hi, I have written a service script(service.sh) for my application which will add my application(BTINM) as service and start the service. Internally inside the script i will call the sh script which will start my application server. When my applicati
-
Unable to Update infotype 586 and 585 through BDC or LSMW
Dear Sir/ Madam, I am in process of updating actual investment by employee in info type 0586 and 585. I have already inputed the projected investments in 586 & 585 and as per tax tax is computed. Also I have written a LSMW to update in the actual Tic
-
HT204264 Nfame of a folder in Icloud photo beta disappeared. How do I get it back?
Put folders in icloud photo beta that were named. Name on one folder originally could be seen. Now not there. How do I get a folder names again?
-
Hi, I tried to import PCUI_GP(.sca file) for development in CMS. Therefore, I got import failed and error message in CBS-make. Immediately, I tried to open CBS. But CBS is not opened. First, I imported following .sca file . CAF EU DI BUILD TOOL EP BU
-
installed and reinstalled itunes onto my new lap top (it's windows) I have authorized this computer but unsure why it's not bringing up my library? Please help.