Skype Connect times out with Elastix - Desperately...
Hello All,
I'm trying to use Skype Connect with Elastix and I am having issues. I have tried everything I could.
The logs keep showing this :
Registration for ***' timed out, trying again (Attempt #3)
My registration string is [***]
Shouldn't the above line make the trunk get registered?
Please help.
Thanks
Edit: I have already tried using putty to connect to the Elastix box. I tried using telnet sip.skype.com 5060. All this works fine. I am able to ping sip.skype.com from the elastix box. I haven't found signs of connectivity issues or firewall blocking or anything like that so far. But strangely, the timedout error is being really tough on me
Current settings Screenshot (Password replaced) :
Hi,
Before going further, would you please let me know the RDC version that used in the problematic computer? Was it the same with other computers?
Please temporarily disable firewall and then check if this issue can be solved. Based on your current description, it’s hard to say the root reason of this issue.
So, I suggest that you should check relevant log files and get some clues. It will help us to narrow down and solve your issue.
Hope this helps.
Best regards,
Justin Gu
Similar Messages
-
Remote Desktop Connection Times Out With "Can't Connect" From One Specific Computer Only
This is an odd one... I manage several servers from this computer. This particular server, 2012 Essentials, won't allow for remote desktop connections to either the server or attached workstations. I can get into the server's remote web page but when I
attempt a remote desktop connection, it hangs on "Initiating remote connection..." and then times out with the error response that remote desktop can't connect. But... if I attempt the same connections from any other computer, I am able to get in
and utilize remote desktop. Does this mean that there is a certificate issue with the computer unable to connect and if so, how does one remedy this? Or is it some other issue? I've attempted everything within my technical ability to no avail. Any suggestions
are greatly appreciated.Hi,
Before going further, would you please let me know the RDC version that used in the problematic computer? Was it the same with other computers?
Please temporarily disable firewall and then check if this issue can be solved. Based on your current description, it’s hard to say the root reason of this issue.
So, I suggest that you should check relevant log files and get some clues. It will help us to narrow down and solve your issue.
Hope this helps.
Best regards,
Justin Gu -
Connection Time out with StockServlet
Hi,
I just followed the instructions on weblogic website to compile and deploy
the XML over HTTP example. Every thing compiled fine and I reused the
statefulSession bean as delivered by weblogic.
After entering all the data at the prompts for StoackClient, I get the error
on server:
"Connection rejected: 'Login timed out after: '5000' ms on socket:
'Socket[addr=127.0.0.1/127.0.0.1,port=2207,localport=7001]''
Any ideas about how can I get it to work??
Thanks,
AnoopUpdate~
The connection time-out issue happen with Clear Quest any version.
thanks -
Error 3259 on downloading with network connection time out
Error 3259 on downloading with network connection time out what will i do?
I have done the procedure of itunes sharing and multicast DNS.
My itunes is fully update with 10.5 and it connect to itunes store but their is downloading error of 3259
I am using usb modem for internet connection.
Please help me.You have to make sure you have stop your antivirus and firewall program in disabled state duwing the download. I also have same issue earlier and it fixed by disabling the antivirus and firewall program.
Hope it should work for you,
Raj -
Getting Connection Time out while connecting and with tnsping
Hello Experts,
I am new to Oracle world, so please go easy on me.
I installed Oracle 11 XE on Centos 6.4 VM. followed the official installation procedure and database was installed without any errors.
I am able to login to database through sqlplus and able to run sql queries.
Problem comes when i am trying to connect from sql developer or external application. i get Connection Time out error.
Below are the tnsnames.ora and listener.ora file content
# tnsnames.ora Network Configuration File:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/xe)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
lsnrctl stat shows service stats as UNKNOWN and tnsping also fails
bash-4.1$ lsnrctl stat
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 11-JUN-2013 02:00:48
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 10-JUN-2013 19:39:03
Uptime 0 days 6 hr. 21 min. 45 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/sagbase/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=basevm)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
bash-4.1$ tnsping xe
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 11-JUN-2013 02:01:16
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
TNS-12535: TNS:operation timed out
I am stuck and don't know where else to check.
Could you guys please help me out here?
Thanks.That tnsping error indicates several possible problems, most related to the setup for the client. Or network setup on the database server host.
Connecting to a database using sqlnet requires three things, the database host, the listener port, and the ORACLE_SID or instance SERVICE_NAME.
The tnsping utility is only concerned with the first two items, host and port. It will not perform an actual connection, and will not verify the tnsalias ORACLE_SID or SERVICE_NAME values.
An "OK" result from tnsping verifies that the specified host has a listener running at the specified port and it is servicing connections.
Since you're not getting an "OK" from tnsping, could be something is blocking the connection (i.e. firewall), the host= specification is not correct, or the port= spec is not correct. Note that host= must either be a valid and correct hostname, or a an IPv4 address. If IPv6 is in the mix, only the correct hostname will work. A hostname that resolves correctly.
Look at your network interface setup on the host, find its IP address, make sure the IP will `ping`, and try a new sqlnet.ora entry with the IPv4 address.
ifconfig -a
<interface>: flags=...
inet n.n.n.n
# in sqlnet.ora:
xe2 = ... host=n.n.n.n ...
tnsping xe2
... ok? ... -
My Mac book pro keeps saying "connection time out occurred" I have a 2011 pro with all the latest updates. It keeps doing it and it really annoys me! Please help!
Take each of the following steps that you haven't already tried, until the problem is resolved.
Step 1
Restart the router. Many problems are solved that way.
Step 2
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 3
From the menu bar, select
▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.
Step 4
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 5
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 6
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain. -
Connection time out issue with wep security
Does anyone know what is causing connection time out when connecting to WEP network.
Password is correct.
$ and x0 in front don't work.
A solution would be great.
ThanksHello freestyleadamski. Welcome to the Apple Discussions!
o The MacBooks back until late 2006 can handle 802.11n/a/b/g
o The late 2006 MacBooks will require the "n"-enabler to support the same.
o The mid-2006 MacBooks will only support 802.11b/g
o The iPod Touch will only support 802.11b/g
Which radio mode should I be using so I can connect my macbooks (I have one and my wife, hers is slightly older) and our ipod touch?
In order of most to least recommended: 802.11n (802.11b/g compatible), 802.11g only, 802.11b/g compatible, & 802.11b only. -
Itunes update to firmware fails, because connection times out.
I have been unsuccessfully attempting to update my iphone 3gs and ipad to iOS 5 for over a month now. I have spent many, many hours on this, and many phone calls to apple support. I disable Norton 360, and windows firewall, and my firewall on my router. I've tried updating my router's firmware, which bricked the router--thanks apple for insisting this was the problem, and I have replaced the router, with a new one. Itunes diagnostics gives me the following information. I am using itunes as the administrator in Windows 7, 64 bit, although itunes doesn't recognize it, unless I reinstall it as the administrator, but then once I restart the computer, itunes no longer recognizes that I using Windows as an admin.
Also, the firmware cannot update, because the connection times out, despite all my firewalls, and antivirus being turned off.
I've tried downloading iOS 5 and then updating using restore, but that didn't work. I've poured through support forums, and error codes: I get 1611, etc. Cannot seem to resolve this.
Any ideas?
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 0040A7BC031F98E0
Current user is not an administrator.
The current local date and time is 2011-11-15 11:35:00.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4800 Series
**** External Plug-ins Information ****
No external plug-ins installed.
The drive F: HL-DT-ST DVDRAM GP08LU30 Rev 1.00 is a USB 1 device.
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {01DC2EA3-0DD0-4A51-80A6-7B414E4C6291}
Description: Realtek PCIe GBE Family Controller
IP Address: 192.168.2.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DHCP Enabled: Yes
DHCP Server: 192.168.2.1
Lease Obtained: Tue Nov 15 11:32:39 2011
Lease Expires: Tue Nov 15 11:32:38 2011
DNS Servers: 192.168.2.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-15 11:33:52.Disable your firewall/security software and try again.
-
Connection time out error in HTTP
Hey guys
i m getting connection time out error in a HTTP scenario,when i go in SXMB_ADM i dont find any entry with the name HTTP_TIMEOUT.
even in RZ10 i cant find the correct profile parameter.
i m taking help from michaels blog
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
i m on PI7.0 SP09
is there some other place i can find this entry? or do i need to ask the basis guys to add it?
thanx
ahmadAlso, there may be other factors to consider depending on your scenario. If you don't have it already, look at the latest <a href="http://service.sap.com/~sapidb/011000358700005909032005E/XI30XI70_TroubleGuide.pdf">XI Troubleshooting Guide</a> - Section 9.2 on "Timeouts in XI".
Regards,
Jin -
Hello everyone,
I'm using modem PK5000 from Century Link. My other two desktops are using Window and in the same room w my modem.
I got connection time out every time my computer started playing the screen saver.
All I have to do is restarting my modem but it's so unconvinience.
I called Century Link customer service and all they told me is changing the channel but it didn't solve the problem.
At school and other people's places, my wifi works just fine.
I used cleanmymac about a month ago and this problem started a week ago.
Can cleanmymac cause the problem? If so, how can I check and fix it?
I check the apple store to update my software but everything is up to date.
Can it be the firmware of my modem? My brother who uses the two desktops (and they connect to the modem with LAN cables) upgraded firmware last week and it seems like when the problem started.
And when my Mac loses the wifi signal, my printer still has the signal, but my desktop cannot log-in to page 192.168.0.1 which manages the modem and wifi even though the desktop connects w my modem by LAN cable and it still connects to the internet.
If you have any clue, please help!
Thank you so much!Thanks Todd, Wayne,
this network timeout sure seems to be the guilty one!
I've changed it, lets see if it's fixed but sure looks like it.
The thing is that I was looking for GWWS tuning here :
http://edocs.bea.com/salt/docs20/ref/comref.html#wp1117652
but should have looked here
http://edocs.bea.com/salt/docs20/admin/config.html#wp1056667
Thanks,
Gary -
Connection time-out issues each first try of pacman
Hi,
I am new to arch. I keep getting a connection time-out each time I use pacman for the first time. I have to do a ctrl+z to stop the command and then delete the db.lck file and then when I run pacman again, any operation on pacman that I had tried works flawlessly.
Do I need to do something to fix this? I check there was a similar thread in 2012, but it ended without any results.
Cheers,
Prashanthgeekoo wrote:@WonderWoofy: The second time on it works with the same mirrors. I am using the Indian http mirror at the top of the list. US mirror follows. When it fails, it takes a sweet 30 odd minutes to run through all of the mirrors and fails.
I'm pretty sure you can disable all the mirrors you don't want to use, try lowering the list to only those in Asia to minize your waiting time atleast. I get a time-out occasionally on the first run, but running anything inside China's GFW is a roll of the dice. -
Connection time-out but then immediately after, no problem
For some reason, the first time I use pacman (after not having used it in a while), the connection times out, but when I Ctrl+C and then do the exact same thing, it starts working.
Any ideas why?
$ sudo pacman -S tmux
resolving dependencies...
looking for inter-conflicts...
Targets (2): libevent-2.0.19-1 tmux-1.6-2
Total Download Size: 0.44 MiB
Total Installed Size: 2.19 MiB
Proceed with installation? [Y/n]
:: Retrieving packages from core...
error: failed retrieving file 'libevent-2.0.19-1-i686.pkg.tar.xz' from ftp.lysator.liu.se : Connection time-out
^Cerror: failed retrieving file 'libevent-2.0.19-1-i686.pkg.tar.xz' from mirrors.ustc.edu.cn : Connection time-out
Interrupt signal received
$ sudo pacman -S tmux
resolving dependencies...
looking for inter-conflicts...
Targets (2): libevent-2.0.19-1 tmux-1.6-2
Total Download Size: 0.44 MiB
Total Installed Size: 2.19 MiB
Proceed with installation? [Y/n]
:: Retrieving packages from core...
libevent-2.0.19-1-i686 296.9 KiB 724K/s 00:00 [#####################] 100%
:: Retrieving packages from community...
tmux-1.6-2-i686 152.2 KiB 1801K/s 00:00 [#####################] 100%
(2/2) checking package integrity [#####################] 100%
(2/2) loading package files [#####################] 100%
(2/2) checking for file conflicts [#####################] 100%
(2/2) checking available disk space [#####################] 100%
(1/2) installing libevent [#####################] 100%
Optional dependencies for libevent
python2: to use event_rpcgen.py
(2/2) installing tmux [#####################] 100%
Last edited by damd (2012-08-13 11:20:38)cfr wrote:Is this issue pacman-specific? Do you know that you definitely have a known-good connection when you're invoking pacman?
I'm using SSH to connect to the server where this problem is happening, indicating that the LAN connection works. Before invoking pacman I've tried pinging google.com, which works flawlessly.
The problem is still there, I just tried it.
EDIT: This actually happens with wget too:
$ wget https://aur.archlinux.org/packages/pa/p … ery.tar.gz
--2012-08-12 21:11:32-- https://aur.archlinux.org/packages/pa/p … ery.tar.gz
Resolving aur.archlinux.org... ^C (took a very long time)
$ wget https://aur.archlinux.org/packages/pa/p … ery.tar.gz
--2012-08-12 21:11:43-- https://aur.archlinux.org/packages/pa/p … ery.tar.gz
Resolving aur.archlinux.org... 208.92.232.29 (works here)
Last edited by damd (2012-08-12 19:12:35) -
SOAP Adapter: Connection time out error
Hi Guys,
I do it one scenario for Proxy to webservice Asynchronous . I have send the input details through Proxy. In Sxmb_Moni shows success message. But Receiver side doesn't reach the payload. Because receiver side (Soap Adapter) shows connection time out error. But i have given correct URL and SOAP Action in receiver communication channel. Please give some suggestions to solve that issues. Please don't refer links.
Thanks & Regards
Vijayhi
this is a time out error
increase the timeout value by specifying the parameter
XI.Timeout in the module parameter of soap Adapter
OR
1. This is because of TimeOut. The default timeout value for synchronous calls is 5
minutes. You can increase this value by setting parameter XI.Timeout in the module parameter table of
the SOAP adapter. The value must be given in milliseconds. For example, value 600000
represents the timeout value of 10 minutes. This parameter is not recognized in systems prior to SP13.
2.The Other Options is send the queue id with your request message.
http://host:port/XISOAPAdapter/MessageServlet?channel=p:s:c
&version=3.0&...&QueueId=xxxxxxxxxxxxxxxx
where xxxxxxxxxxxxxxxx is an ABAP queue ID.
3.Check your RWB message monitoring.
Is there any system failure message and holding message be there.
If then clear the messages.
4. Increase the time out parameter for HTTP in your altova xml spy.Defaultly it will be very low. -
BPC: SOA and setting connection time outs in BPC
Hi All,
can any one explain SOA architecture of BCP and how it improves performance?
My understanding of SOA arcitecture is it breaks down large application into small modules called services.
Here what are the services it is refering to?
And in SOA arcitecture, is the client connected to server only when it requests for a service and connection terminates after the service is provided?
If that is the case, what is the need for setting connection time outs to improve BPC performance.
Any Help is Greatly appreciated.
kranthi kumarSOA = services oriented architecture
is a method for systems development and integration where functionality is grouped around business processes and packaged as interoperable services. SOA also describes IT infrastructure which allows different applications to exchange data with one another as they participate in business processes. The aim is a loose coupling of services with operating systems, programming languages and other technologies which underlie applications.[1] SOA separates functions into distinct units, or services[2], which are made accessible over a network in order that they can be combined and reused in the production of business applications.[3] These services communicate with each other by passing data from one service to another, or by coordinating an activity between two or more services. SOA concepts are often seen as built upon, and evolving from older concepts of distributed computing[3][2] and modular programming.
So SOA is not implemented for performances reason and it is more for integration.
Regards
Sorin Radulescu -
Hi All...
I installes an add-on to SAP Business One (I created that ad-on using C# and created .ard file using Add-On Registration Data Generater)
and I got the system message "Add-on connection Time Out" plz help me to solve this matter.
regards
PadmaWhile creating final ard file dont use any connetion string .
1) REmove connection string.
2) Rebuild application.
3) Create ARD file.
Use below code for any ref.
Private Sub SetApplication()
'// Use an SboGuiApi object to establish connection
'// with the SAP Business One application and return an
'// initialized appliction object
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
SboGuiApi = New SAPbouiCOM.SboGuiApi
'// by following the steps specified above, the following
'// Statment should be suficient for either development or run mode
'sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
sConnectionString = Environment.GetCommandLineArgs.GetValue(1) '
'sConnectionString = "5645523035496D706C656D656E746174696F6E3A59313931303035313531383699469FA92C3C9A964A219C5862952A90D911E9" 'Environment.GetCommandLineArgs.GetValue(1)'
Try
SboGuiApi.Connect(sConnectionString)
'// connect to a running SBO Application
'// get an initialized application object
SBO_Application = SboGuiApi.GetApplication()
Catch ex As Exception
MsgBox("Make Sure That SAP Business One Application is running!!! ", MsgBoxStyle.Information)
End
End Try
SBO_Application.StatusBar.SetText("DI is Connecting now", SAPbouiCOM.BoMessageTime.bmt_Long, SAPbouiCOM.BoStatusBarMessageType.smt_Warning)
End Sub
Maybe you are looking for
-
Opening a pdf file without using ABAP
Hi All, Can I open a pdf file in the ITS without using ABAP coding. I mean by using Java Script in an another dialog/page can i open a pdf file. If anyone has got any idea or sample code please let me know. Thanks, Amitabh
-
How to add button on heading just like this page in template?
Hi, I'd like to create template that have many buttons on heading just like this page. But in the wizard to create template, it can only add three button: one for application,another for home,and the other for help. What should I do? Do I create temp
-
I have been able to re-load all of the songs to my I-Pod touch that were not lost on the computer. All of the songs were lost when I did a download of the new operating system. Has anyone had this proble, and does anyone know how I can locate the f
-
I am trying to update Itunes, I am being told it must be OS X 10.6.8, I have 10.5, how am I going to be able to download the new Itunes?
-
Getting iMovie to re-render a clip
I ran into a strange situation where iMovie appears to have screwed up and used the wrong photo to render numerous clips. In the timeline, however, the affected clips show the correct name of the photos, so iMovie knows which photos it should have us