Skype CONSTANTLY connecting and reconnecting

Hello, past few months I am having the error "The call is connecting" when I attempt to call someone. When I accept the call everything works perfectly for a few minutes and then it starts ... I became offline, the call starts stuttering, robotic speach, I can not hear the other side, nor they can hear me as I apperar offline to them, and everything else works perfectly fine except when I am in a call.
I have been using Skype for a long time on this same computer/same install of application and never had a problem until this past month.  I contacted Skype support and went through the troubleshooting process including checking firewall exceptions (Windows and AVG), app data skype folder, clearing out my router via resetting the power and so forth. I have also tried multiple "clean" installs of the latest Skype version but the error continues, and never had the problems before.
This confuses me further because my Skype account and Skype in general works fine from my Android tablet and android phone, but will not work from my PC at all (thus the problem is not with my account login information). I even attempted to "downgrade" Skype by downloading an older version of the product of it made no difference. I tried even with different ISPs and connections and still the same problem. I tried with all programs closed except Skype akd still problem remains ...
Lastly, to my knowledge nothing changed on my PC in terms of software, including the Skype client recently, Skype has just stopped working for me and conastantly reconnects when I am in a call or even worse when I start the call.
Does anyone have further suggestions to fix this problem?
Thank you in advance for your assistance. 

Press WinKey + R to open the Run window
Type: regedit.exe then press Enter
 Delete the Skype keys on the following:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies
HKEY_CURRENT_USER\SOFTWARE\Policies (if any)
Now try again with above settings.
Our greatest weakness lies in giving up. The most certain way to succeed is always to try just one more time.
If you found my post useful, please give "Kudos".
If it helped to answer your problem/question, please mark it as "Accepted Solution" so other people can find it easily.

Similar Messages

  • Android phone constantly disconnects and reconnects to vpn

    When using verizon 4G the android anyconnect constantly disconnects and reconnects. When it is connected for about 10 seconds it is working normally. This does not happen on the phone when the user is connected to wifi. It is only on 4G. 
    5|Oct 30 2014|10:42:45|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
    5|Oct 30 2014|10:42:45|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
    6|Oct 30 2014|10:42:45|725007|70.199.141.46|11874|||SSL session with client outside:70.199.141.46/11874 terminated.
    6|Oct 30 2014|10:42:45|725007|70.199.141.46|11874|||SSL session with client outside:70.199.141.46/11874 terminated.
    5|Oct 30 2014|10:42:44|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
    5|Oct 30 2014|10:42:44|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
    6|Oct 30 2014|10:42:44|725007|70.199.141.46|11872|||SSL session with client outside:70.199.141.46/11872 terminated.
    6|Oct 30 2014|10:42:44|725007|70.199.141.46|11872|||SSL session with client outside:70.199.141.46/11872 terminated.
    6|Oct 30 2014|10:42:22|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> UDP SVC connection established without compression
    6|Oct 30 2014|10:42:22|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> UDP SVC connection established without compression
    5|Oct 30 2014|10:42:22|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New UDP SVC connection replacing old connection.
    5|Oct 30 2014|10:42:22|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New UDP SVC connection replacing old connection.
    6|Oct 30 2014|10:42:22|725002|70.199.141.46|11874|||Device completed SSL handshake with client outside:70.199.141.46/11874
    6|Oct 30 2014|10:42:22|725002|70.199.141.46|11874|||Device completed SSL handshake with client outside:70.199.141.46/11874
    6|Oct 30 2014|10:42:21|725003|70.199.141.46|11874|||SSL client outside:70.199.141.46/11874 request to resume previous session.
    6|Oct 30 2014|10:42:21|725003|70.199.141.46|11874|||SSL client outside:70.199.141.46/11874 request to resume previous session.
    6|Oct 30 2014|10:42:21|725001|70.199.141.46|11874|||Starting SSL handshake with client outside:70.199.141.46/11874 for DTLS session.
    6|Oct 30 2014|10:42:21|725001|70.199.141.46|11874|||Starting SSL handshake with client outside:70.199.141.46/11874 for DTLS session.
    6|Oct 30 2014|10:42:21|725001|70.199.141.46|11874|||Starting SSL handshake with client outside:70.199.141.46/11874 for DTLS session.
    6|Oct 30 2014|10:42:21|725001|70.199.141.46|11874|||Starting SSL handshake with client outside:70.199.141.46/11874 for DTLS session.
    4|Oct 30 2014|10:42:21|722051|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> IPv4 Address <192.168.75.101> IPv6 address <::> assigned to session
    4|Oct 30 2014|10:42:21|722051|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> IPv4 Address <192.168.75.101> IPv6 address <::> assigned to session
    6|Oct 30 2014|10:42:21|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> TCP SVC connection established without compression
    6|Oct 30 2014|10:42:21|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> TCP SVC connection established without compression
    5|Oct 30 2014|10:42:21|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New TCP SVC connection replacing old connection.
    5|Oct 30 2014|10:42:21|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New TCP SVC connection replacing old connection.
    6|Oct 30 2014|10:42:21|725002|70.199.141.46|11872|||Device completed SSL handshake with client outside:70.199.141.46/11872
    6|Oct 30 2014|10:42:21|725002|70.199.141.46|11872|||Device completed SSL handshake with client outside:70.199.141.46/11872
    6|Oct 30 2014|10:42:20|725001|70.199.141.46|11872|||Starting SSL handshake with client outside:70.199.141.46/11872 for TLS session.
    6|Oct 30 2014|10:42:20|725001|70.199.141.46|11872|||Starting SSL handshake with client outside:70.199.141.46/11872 for TLS session.
    5|Oct 30 2014|10:41:48|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
    6|Oct 30 2014|10:41:48|725007|70.199.141.46|8787|||SSL session with client outside:70.199.141.46/8787 terminated.
    5|Oct 30 2014|10:41:48|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
    6|Oct 30 2014|10:41:48|725007|70.199.141.46|8799|||SSL session with client outside:70.199.141.46/8799 terminated.
    6|Oct 30 2014|10:41:21|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> UDP SVC connection established without compression
    5|Oct 30 2014|10:41:21|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New UDP SVC connection replacing old connection.
    6|Oct 30 2014|10:41:21|725002|70.199.141.46|8787|||Device completed SSL handshake with client outside:70.199.141.46/8787
    6|Oct 30 2014|10:41:21|725003|70.199.141.46|8787|||SSL client outside:70.199.141.46/8787 request to resume previous session.
    6|Oct 30 2014|10:41:21|725001|70.199.141.46|8787|||Starting SSL handshake with client outside:70.199.141.46/8787 for DTLS session.
    6|Oct 30 2014|10:41:21|725001|70.199.141.46|8787|||Starting SSL handshake with client outside:70.199.141.46/8787 for DTLS session.
    4|Oct 30 2014|10:41:20|722051|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> IPv4 Address <192.168.75.101> IPv6 address <::> assigned to session
    6|Oct 30 2014|10:41:20|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> TCP SVC connection established without compression
    5|Oct 30 2014|10:41:20|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New TCP SVC connection replacing old connection.
    6|Oct 30 2014|10:41:20|725002|70.199.141.46|8799|||Device completed SSL handshake with client outside:70.199.141.46/8799
    6|Oct 30 2014|10:41:19|725001|70.199.141.46|8799|||Starting SSL handshake with client outside:70.199.141.46/8799 for TLS session.
    6|Oct 30 2014|10:31:19|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> UDP SVC connection established without compression
    5|Oct 30 2014|10:31:19|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New UDP SVC connection replacing old connection.
    6|Oct 30 2014|10:31:19|725002|70.199.141.46|8529|||Device completed SSL handshake with client outside:70.199.141.46/8529
    6|Oct 30 2014|10:31:19|725003|70.199.141.46|8529|||SSL client outside:70.199.141.46/8529 request to resume previous session.
    6|Oct 30 2014|10:31:19|725001|70.199.141.46|8529|||Starting SSL handshake with client outside:70.199.141.46/8529 for DTLS session.
    6|Oct 30 2014|10:31:19|725001|70.199.141.46|8529|||Starting SSL handshake with client outside:70.199.141.46/8529 for DTLS session.
    4|Oct 30 2014|10:31:18|722051|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> IPv4 Address <192.168.75.101> IPv6 address <::> assigned to session
    6|Oct 30 2014|10:31:18|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> TCP SVC connection established without compression
    5|Oct 30 2014|10:31:18|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New TCP SVC connection replacing old connection.
    6|Oct 30 2014|10:31:18|725002|70.199.141.46|8540|||Device completed SSL handshake with client outside:70.199.141.46/8540
    6|Oct 30 2014|10:31:18|725001|70.199.141.46|8540|||Starting SSL handshake with client outside:70.199.141.46/8540 for TLS session.

    I experienced the same problem with my Lumia 800 and the MyWay audio/navi/BT telephone system in my previous and current Citroën C5 (both latest model (PhIII)): http://discussions.nokia.com/t5/Nokia-with-Windows-Phone/Bluetooth-and-3G/td-p/1288591 .
    I first thought it had something to do with switching from G to 3G and back. But in the end I discovered that BT on the Lumia 800 just disabled itself, while connected to my cars BT system. I have started the procedure to send my Lumia tot Nokia Care. Keep You informed.

  • IPad keeps connecting and reconnecting on Macbook Pro using USB.

    For the past month or so my iPad hasn't been able to connect to my 2013 Macbook Pro. I've tried solutions such as reinstalling iTunes and updating software but nothing has worked. I can connect to my PC fine but when I try to connect to the Macbook, it keeps quickly connecting and reconnecting. When I connect to the Macbook it gives me the message "iTunes could not connect to this iPhone. This device is no longer connected.". This seems to be a problem with the Macbook instead of the iPad. I haven't enabled it to connect over Wifi also.
    I've tried looking up solutions for people who have had similar problems but I haven't yet found a solution that worked for me. Any help is much appreciated.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My iphone4 when connected to any computer will not charge and is constantly connected and disconnected.  does the same with itunes.  Also i'm talking on the phone and all of a sudden the other person can not hear me.

    My iphone4 when connected to any computer will not charge and is constantly connecting and disconnecting.  It does the same with itunes so it doesnt really sync.  Also when talking to someone, all of a sudden they cant hear me.

    I'm having the same issue. I went to my local apple store and they could not work me into the genius bar so i made an appointment for tomorrow morning. The clerk did check the phone for the pink indicators at the top and bottom of the phone (where you plug in your USB or headphones) He said if you can see a pink indicator dot you may have gotten it wet, or had some sort of condensation in it, which could cause the plugs to not work.
    In regards to people not being able to hear you, i'm waiting for my appointment tomorrow for more news! I would recommend taking it into your local apple store for more answers.

  • My iphone keeps connecting and reconnecting

    I'm trying to connect my iphone to my pc.  It keeps "connecting" and "reconnecting".  Its getting very frustrating.  I'm not sure why its doing this.  First an error comes up that says "iTunes cannot install apps to iPhone "Ryan's iPhone 4S" because the apps installed on the phone could not be determined."   another error is "The iPhone "Ryan's iPhone 4S" cannot be synced.  The required disk space cannot be found".
    what should I do now??

    Clean iPhone Dock Port with a clean dry toothbrush. Try different USB Cable. Try different USB port on computer. Try different computer.

  • Skype drops connection and cannot reconnect after network change

    Whenever I switch between wifi and cable or if I enable my VPN, the skype connection drops and does not reconnect. The problem is not the VPN though because when on VPN I can Quit Skype, and reopen it and then it will connect. The same applies when switching between wifi and cable. Having to quit and restart skype everytime I switch really sucks, its supposed to be more "rugged" i would think.

    Besed wrote:
    techfreak, many words, but nothing to say about the issue and solution. With all respect.
    Guys tell you that when they quit Skype and start it again, it connects well! It means nothing to do with local IT configuration. The problem started few months ago. There is a proxy configuration for VPN defined in Skype settings and it always worked fine, switching connection accordingly to the network. Now it loses connection when we switch between VPN and regular network and vice versa. The Skype restart is required each time to restore connection and it is REALY annoying.
    If you claimed it worked differently before what changed on your end?  Does it behave differently in an older version of Skype (harder to test since they're discontinuing older versions)?  Most people who connect to a VPN use a VPN client to do so like the Windows  PPTP VPN, Cisco VPN client, etc..   People use varying VPN servers and VPN client versions and they can behave differently.   If users have a Proxy server they define that in the Proxy configuration.  I've personally never attempted authenticating to a VPN server using the Skype's proxy configuration in connection settings.   Split-tunneling is one setting that affects how traffic is handled and can produce a different result.  I wish I could tell you there is one solution to your problem.  If  you determine the process differed in a earlier release, it would be helpful to post the last release it behaved in the fashion you are accustomed to. A contact of mine uses a VPN connection and toggles it on and off especially when we have bandwidth related issue.  That does disrupt his Skype connection momentarily but he hasn't had to ever completely exit Skype.  However he relies on the VPN client and does not place that authentication information in the proxy configuration.

  • Skype drops connection and cannot reconnect after ...

    Whenever I switch between wifi and cable or if I enable my VPN, the skype connection drops and does not reconnect. The problem is not the VPN though because when on VPN I can Quit Skype, and reopen it and then it will connect. The same applies when switching between wifi and cable.
    Having to quit and restart skype everytime I switch really sucks, its supposed to be more "rugged" i would think.

    Besed wrote:
    techfreak, many words, but nothing to say about the issue and solution. With all respect.
    Guys tell you that when they quit Skype and start it again, it connects well! It means nothing to do with local IT configuration. The problem started few months ago. There is a proxy configuration for VPN defined in Skype settings and it always worked fine, switching connection accordingly to the network. Now it loses connection when we switch between VPN and regular network and vice versa. The Skype restart is required each time to restore connection and it is REALY annoying.
    If you claimed it worked differently before what changed on your end?  Does it behave differently in an older version of Skype (harder to test since they're discontinuing older versions)?  Most people who connect to a VPN use a VPN client to do so like the Windows  PPTP VPN, Cisco VPN client, etc..   People use varying VPN servers and VPN client versions and they can behave differently.   If users have a Proxy server they define that in the Proxy configuration.  I've personally never attempted authenticating to a VPN server using the Skype's proxy configuration in connection settings.   Split-tunneling is one setting that affects how traffic is handled and can produce a different result.  I wish I could tell you there is one solution to your problem.  If  you determine the process differed in a earlier release, it would be helpful to post the last release it behaved in the fashion you are accustomed to.
    A contact of mine uses a VPN connection and toggles it on and off especially when we have bandwidth related issue.  That does disrupt his Skype connection momentarily but he hasn't had to ever completely exit Skype.  However he relies on the VPN client and does not place that authentication information in the proxy configuration.

  • Skype constantly disconnecting and muting others' voices

    I'm on Windows 8.1, and am running the most current version of Skype.Despite this, in the past couple of days alone, Skype has started acting up. I will go on skype, it will load every message just fine, I can join calls, I can talk and be heard, video works fine both ways, and I can message... Just that I can't hear what anybody in a call is saying. I can hear the notifications and the test sound, but not my friends' voices. What's more perplexing is that after 10 minutes or so I can start hearing them. Which brings me to the second problem... I only have so much time before skype disconnects me. I have been constantly disconnected from Skype despite a continuous internet connection. Somebody please help!

    Make a direct connection from your PC/laptopto the modem which will eliminate the homehub. Follow this guide to do that. Use your computer as normal to see if it disconnects. If it does not disconnect you will know that there is nothing wrong with your line/connection and it may be a faulty hub . Obviously this must be done with a wired connection and no wireless devices will work while you are doing that.
    Step 1: Remove the homehub from the modem
    Step2: Connect your pc/laptop into the modem using LAN1 port
    Step3: Open network and sharing centre on windows and click set up a new connection or network
    Step4: Connect to the internet then click make a new connection Broadband PPPoE
    Step5: Username [email protected] and the password as BT
    Step6: connect, If it doesn't,keep pressing try again until it does.

  • Skype constantly buffers and freezes on my phone (...

    My phone constantly buffers and freezes. I have a Nokia Lumia 530 phone and I'm always having problems.

    This phone is probably not the best one for Skype, but if you were using 3G then please try to use Skype over Wifi. Also make sure you have the latest Skype for Android.
    If the call quality is still not good and constantly dropping out then you may request a refund. There's not much we can do on our side regarding connection.
    https://support.skype.com/en/faq/FA297/How-do-I-request-a-refund
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

  • Skype shows "Connecting" and never comes back

    Upgraded to v7 recently.  Running a Win 8 desktop.  Had no issues w/Skype for years.
    Now, after finally getting what I thought was a successful Installation, Skype just sits their in the desktop tray (pale icon) and says "connecting" and never comes back.  Disabled my firewall (which was never a problem before) and it didn't matter.
    Frustrated, I clicked the desktop icon and then got another error indicating I am "logged onto this PC with another Skype account", where upon I then try to login to Skype with a different account, and it then infinitely just says "logging in".
    I've uninstalled and re-installed countless times (and yes, countless reboots and shut-down / power back on) and I've finally given up using Skype for awhile, since nothing I can do makes a difference.
    Any suggestions or help would be appreciated.

    Try first to reset all Skype settings.
    Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
    Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
    Restart Skype.
    N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

  • Charger keeps connecting and reconnecting ?

    I have had my new iTouch5 for about 6 months and just recently have had this annnoying problem whenever I plug my charger in to my iPod it connects but whenever I movie my ipod it disconnects or bump the iPod it disconnects. The iPod itself works perfectly until I need to charge it or sync it. The charger is plugged in fine and tight but I still get the disconnect and reconnect isssue. Whenver I sync on my Macbook Pro 2012 model I get this annoying message:
    The USB device is drawing to much power and has been disabled. I an live with this because all my music is in iCloud and I can sync it from there wirelessly it is just the charger disconnecting and reconnecting issue. I am using a wall socket to charge it if that helps.
    If you can help this would be appreciated
    Regards Adam (monerz)

    Very likely a bad cable
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store. If defective and not abused Apple will exchange it under your warranty
      Apple Retail Store - Genius Bar                 

  • Airport constantly disconnecting and reconnecting...

    This issue started to appear few days ago, and it is really frustrating.
    For every 10-20 minutes, my Airport disconnects from the networks and reconnects in a matter of seconds, causing all of my on-line activities to cancel, and IM programs to disconnect.
    Anybody familiar with this issue? Any help would be appreciated.
    Thanks,
    B

    I'm having a similar issue - I have 3 Mac laptops and 1 PC desktop networked and today for example all 3 Macs dropped the wireless connection, had a hard time reconnecting/finding the signal (even though it shows in the drop-down list). I've tried around with unplugging/replugging, rebooting, etc. but the problem sporadically reoccurs. BTW, in today's little episode the PC desktop stayed connected.

  • Connection and reconnection taking a lot of time

    Hi ppl. I am on a POC with 5 machines plus the Active Directory on a Win 2003 server,
    the vdi hosts and the storage server each of them reside on a LDOM (four in total) created
    on one sparc blade on a sun blade 6000, each vdi has 4 gb of memory and the storage server
    has 3 gb (ARC size is 2GB) and one zfs partition of about 60gb.
    The xVM server was created in a LDOM on an x68 blade on the
    same sun blade 6000. Solaris 10 U7 in all of them. VDI and virtualbox installed as per
    installation instructions. All vdi servers has the AD as their ntp and dns server.
    The user directory is working, connected and authenticated to the AD, we are able to search
    for users from the web interface.
    the problem: most of the time the vdi login screen appears after less than 30 secs, but
    after entering a valid (or for testing, invalid) user/password, most of the time the "connecting
    to vdi" screen is displayed for 1 or more minutes, after which it either falls back to the
    vdi login screen or opens a the session or shows the two VMs to pick one. After selecting
    one of the VMs or entering the previous session, everything works fast, inside the win
    session, but then again, when we log out,disconnect or close the session, it takes for
    anoter 2 or more minutes to get the VDI login screen again, it has taken up to 5 to 6 mins
    to get to the vdi screens.
    I dont find any related information on the cacao.0 logs, dmesg or /var/log/syslog log files,
    the vdi web admin interface shows the VM taken by the user used in the vdi login screen,
    also, just got kicked out of the vdi web admin with an error (will be posted on the next
    message, what can we be doing wrong? what should we look at?
    thanks in advance
    -Oswaldo

    error:
    Error Details
    Here is a full stack trace of the error:
    javax.servlet.ServletException: javax.faces.FacesException: org.apache.jasper.el.JspELException: /jsp/pools/PoolDesktops.jsp(187,116) '#{PoolDesktopsBean.pool.vcDesktopProvider}' Error reading 'pool' on type com.sun.vda.admin.pools.PoolDesktopsBean
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:256)
         at sun.reflect.GeneratedMethodAccessor147.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276)
         at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
         at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:56)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:189)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185)
         at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:267)
         at sun.reflect.GeneratedMethodAccessor146.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276)
         at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:218)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:230)
         at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:56)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:189)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185)
         at com.sun.vda.admin.authentication.AuthenticationFilter.doFilter(Unknown Source)
         at sun.reflect.GeneratedMethodAccessor56.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276)
         at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:218)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:230)
         at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:56)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:189)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
         at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:525)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.valves.RequestFilterValve.process(RequestFilterValve.java:269)
         at org.apache.catalina.valves.RemoteAddrValve.invoke(RemoteAddrValve.java:81)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: javax.faces.FacesException: javax.faces.FacesException: org.apache.jasper.el.JspELException: /jsp/pools/PoolDesktops.jsp(187,116) '#{PoolDesktopsBean.pool.vcDesktopProvider}' Error reading 'pool' on type com.sun.vda.admin.pools.PoolDesktopsBean
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:675)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:681)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:681)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:681)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:681)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:681)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:681)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:647)
         at com.sun.faces.extensions.avatar.components.PartialTraversalViewRootHelper.invokeContextCallbackOnSubtrees(PartialTraversalViewRootHelper.java:596)
         at com.sun.faces.extensions.avatar.components.PartialTraversalViewRootHelper.processDecodes(PartialTraversalViewRootHelper.java:234)
         at com.sun.faces.extensions.avatar.components.PartialTraversalViewRootImpl.processDecodes(PartialTraversalViewRootImpl.java:145)
         at com.sun.faces.lifecycle.ApplyRequestValuesPhase.execute(ApplyRequestValuesPhase.java:101)
         at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
         at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:117)
         at com.sun.faces.extensions.avatar.lifecycle.PartialTraversalLifecycle.execute(PartialTraversalLifecycle.java:94)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:244)
         ... 54 more
    Caused by: javax.faces.FacesException: org.apache.jasper.el.JspELException: /jsp/pools/PoolDesktops.jsp(187,116) '#{PoolDesktopsBean.pool.vcDesktopProvider}' Error reading 'pool' on type com.sun.vda.admin.pools.PoolDesktopsBean

  • Browsers and Mail keep loosing connection and reconnecting randomly.

    Connected to a wifi network that has always worked fine.
    Only change is Yosimite upgrade.
    Browsers intermittently report no network connection, then make connection seemingly randomly.
    Mail keeps taking accounts off line in spite of always being connected.
    I do have 16 gigs of ram.
    Does anyone know what has happened and how to fix?

    The only change has been switching to Yosimite.
    The wireless diagnostic says "Basic failure..." contact apple support.
    Other devices and computers are connected to same wifi without a problem.
    The wifi network is not the issue, something has changed in how the OS is connecting.
    The browsers, (Safari and Firefox) will loose connection and say not connected to internet from onwe moment to the next.
    A page can be refreshed then a new will report that I am not connected to internet, then after a few attempts to try again, it works.
    Mail also seems to loose connection and asking if I want to connect.
    The wireless and mail and all browsers have worked with out a problem for years.

  • All iPhones constantly connecting and disconnecting from 2014 MacBook Pro with retina display

    So I have an iPhone 6, 4s, and 3gs, whenever I plug any of them into my MacBook pro they rapidly connect and disconnect. After about 20 seconds of doing this they trackpad and keyboard stop responding and won't be recognized until I restart the laptop.
    Just as more information I have used 5 or 6 different cables and it works fine with my LG G3 and every other usb device I use. I have iTunes updated to 12.0.1 and OSX updated to 10.10, and this has been happening for about 2 months or so. My iPhone 6 is running 8.1 but did this before, although with the first sync when I first got the phone it worked fine.
    Any information would be helpful
    Thank you

    I'm having the exact same issue with the new 2014 iMac 5K Retina i5. iPhone 5 and iPhone 5s both work flawlessly.

Maybe you are looking for

  • Can I have two accounts on one email

    I need to change my apple id email but when i try to it says "already an apple id" I went to the old id and tryed to delete it but i saw you cant delete an id .so now i'm stuck with ,my normal id with all my data and old email, and an old one with no

  • Spool request generated twice

    Dear all, I'm facing a very strange behavior while printing sales order confirmation from va01 in SAP ECC5.0. I've got access sequences and condition records in order to print out immediately the form at saving, based on sales org/doc type. Among 3 d

  • How to set Database Logon Info, if allowDatabaseLogonPrompting="false"

    Hey, Here is the Version Details - Crystal report X1 R1 Sql Server 2005 Tomcat 5.5.27 Question - I am using jsf viewer to dispaly report in my web project. We don't want to prompt for database logon information before showing the report to teh front

  • ITunes Closes When PC Is Idle

    Whenever I run iTunes (v. 6.0.3.5/Windows XP SP2 Pro) in the mini-player, if I pause it and go away for a while, I come back to find it's closed itself down (no error messages or anything, just turned itself off). Any ideas?

  • Connect by prior return unnecessary rows

    Hello, I am using oracle 9.2 my query looks like this: SELECT * FROM book_items t where cust_id = 2305240 and sort_key is not null CONNECT BY PRIOR item_id = parent_id START WITH t.item_id = 193 ORDER SIBLINGS BY sort_key the problem is, when I have