Skype.exe attempts to contact potentially maliciou...

I am getting frequent messages from Malwarebytes that it has "Successfully blocked access to a potentially malicious IP address 222.76.139.5 (Type: outgoing, Port: 32311, Process: skype.exe). Apparently the IP address is somewhere near Beijing and is listed with pbl.spamhaus.org. Can anyone tell me why my Skype would be trying to contact this address and how I can stop it. Thanks.
Solved!
Go to Solution.

I have read similar reports before. Please check the discussion here - http://community.skype.com/t5/Security-Privacy-Trust-and/suspicious-outgoing-IP-attempts/td-p/68170
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Similar Messages

Skype - Intrusion Attempts GNU BASH

As reported by Norton, something in Skype keeps attempting an so-called "GNU Bash".
These intrusion attempts have just started today and originate from SKYPE.EXE. I am not actively Skyping with anyone, have not downloaded anything through Skype today, and have Skype minimized. I do have the ads partly blocked (cannot see them), but they are still possibly there and are likely the cause. There are likely some bad ads going around..
Solved!
Go to Solution.

This is more than likely not Skype specific though in this case it sounds related to an infected advertisement. The GNU Bash vulnerability has pretty much gone rampant online. It doesn't have to be an advertisement and can be any user or Skype user attacking a range of IPs that their computer interacts with. The only computers affected by that vulnerability are Linux/Mac users and similar devices that use Bash that haven't been patched. Bash by default is not installed on OSX unless someone enables advanced Unix services. That vulnerability would have no effect on a Windows user. So if any of your contacts have Bash installed on a device/OS you might urge them to get it patched or to uninstal it, if not needed.

Attempting to test potential Autodiscover URL / SSL

Hello,
I have exchange 2010 and I think my AutoDiscover is setup correctly however the connection is trying to pull an SSL certificate from my web server instead of my Exchange server.
The challenge at the moment is my website and DNS is hosted by a third party. Here at our home office we host everything else internally (Exchange 2010, Domain controller, Sub-Domain websites, etc...)
DNS is configured for Autodiscover.DOMAIN.com to point to the public IP of my Exchange 2010 server. All mobile devices, OWA all work which tells me all the connections are active and working perfectly.
Using the Microsoft Connectivity Tool >OUTLOOK AUTODISCOVER (https://testconnectivity.microsoft.com), I run the test and everything checks out perfectly for the exception of the where it is resolving for the SSL certificate;
"Attempting to test potential Autodiscover URL https://DOMAIN.com:443/Autodiscover/Autodiscover.xml"
The domain.com is resolving to my web server hosted else where, when i need it to include my sub-domain to point the connection to my Exchange server here in house, "Autodiscover.DOMAIN.com:443/Autodiscover/Autodiscover.xml"
Someone had suggested an SRV Record but my DNS provider is arguing with me that the configuration is on my side.
As the test goes on, when it gets to the,
"Attempting to test potential Autodiscover URL https://autodiscover.DOMAIN.com:443/Autodiscover/Autodiscover.xml",
everything is green telling me that my autodiscover is working perfectly.
Currently I am stumped and dead in the water.
Does anyone has any insight to point me in the right direction please?
Thanks
P.S. Would it be safe if i were to post the HTML version of the Test result?

Hi,
For non-domain-joined clients or clients that are not able to directly access the domain, Outlook is hard-coded to find the Autodiscover end-point by looking up either
https://company.com/Autodiscover/Autodiscover.xml or
https://Autodiscover.company.com/Autodiscover/Autodiscover.xml.
We can configure IIS redirection or DNS Service (SRV) resource record to enhance security and SSL certificate, for your reference:
https://technet.microsoft.com/en-us/library/cc511507(v=office.14).aspx#BKMK_OverviewOfUsingAutodiscoverWithDNS
http://blogs.technet.com/b/exchange/archive/2007/04/30/3402138.aspx
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Skype Intrusion Attempt (again)?

Hello. Until recently, I've pretty much had no problems with Skype at all as I'm using version 6.6.0.106; however, just a few hours ago I have noticed multiple intrusion attempts on my comptuer originating from Skype.exe. Below are some pictures that my Norton Antivirus has detected:
I have read an earlier article about the same incident located here:
http://community.skype.com/t5/Security-Privacy-Trust-and/Skype-y-u-be-attacking-my-computer/m-p/1759...
It appears to be that the problem is 'resolved' but I am still getting these intrustion attempts every few hours or so which is quite frustrating and annoying. Has this issue truly been resolved since the previous post? Any help / advice would be greatly appreciated!
Thanks in advance.

It seems that a flash ad and / or code that Microsoft has ported from Windows Live Messenger will randomly and spontaneously open your default webbrowser to a survey. There are multiple traces of this dating back to ~2005 and no clear solutions on any forum posts, so it seems as though it may be some legacy code from Windows Live Messenger.
Basically it's due to the ads that Microsoft has linked to Skype at present, they're laden with both ad and malware, and Microsoft seems to not want to do much about it.

Exception EOlesysERROR in module Skype.exe @ 00129...

Skype ran with no problems prior to the latest update. Computer is Dell Latitude laptop running Win 7 Ultimate SP 1 64-bit.
First Install
1. Logged in to local admin account.
2. Disabled malwarebytes realtime protection.
3. Got a fresh download from Skype site for Save and Run.
4. Got Exception EOlesysERROR in module Skype.exe @ 00129D71.
5. Visited Skype site and reviewed Skype Community.
6. I tried to get the 6.14.0.14.msi download per the Community, but the link had been disabled.
7. Retried install in Safe mode with No Networking . Got Exception EOlesysERROR in module Skype.exe @ 00129D69.
Second Install
1. Restarted the laptop and logged into local admin account.
2. Uninstalled Skype 6.21 and Skype Click to Call.
3. Ran TweakNow Power Pack 2011 to clean registry and tracking items.
4. Got a fresh download from Skype site for Save and Run.
5. Got Exception EOlesysERROR in module Skype.exe @ 00129D71.
6. Changed permissions on Skype icon and Skype.exe to give “everyone” full control.
7. Skype would not run.
Third Install
1. Uninstalled Skype 6.21 and Skype Click to Call.
2. Found an earlier version 6.18 of Skype in the C:\users\localadmin\downloads folder.
3. Ran SkypeSetup.msi for version6.18. After completing some of the install, got Access Denied error.
4. Uninstalled Skype 6.18.
5. Ran TweakNow Power Pack 2011 to clean registry and tracking items.
6. First Search: Deleted all Skype Folders by using the Windows Search utility while logged into local admin
account. It found about 40 items.
7. Second Search: Ran the Windows Search utility again and found 8 items.
8. Ran TweakNow Power Pack 2011 to clean registry of Skype items. Ran it again to clean tracking items for Skype.
9. Retarted the laptop.
10. Third Search: Ran the Windows Search utility again and it was clean.
11. Logged in as the standard user.
12. Fourth Search: Ran the Windows Search utility again and it found 7 Skype items.
13. Ran TweakNow Power Pack 2011 to clean registry of Skype items. It found some Skype items for the standard user.
Ran it again to clean tracking items for Skype.
14. Logged out of standard user and logged in as local admin.
15. Ran dxdiag.exe per reference in the Community. No problems were found in either in 32- and 64-bit modes.
16. Could not delete the Skype Icon in the Recycle bin as it was being held by $R03LAFF.exe.
Fourth Install
1. Logged in to local admin account.
2. Got Skype 6.21.32 from CNET’s download.com and Saved to download folder.
3. Disabled Wi Fi connection, antivirus and malwarebytes.
8. Ran Skype Setup. Got Exception EOlesysERROR in module Skype.exe @ 00129D69. Also got Access Denied when trying to
run the executable.
4. Admitted defeat to myself and to the standard user of the laptop.

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Skype.exe - problem library ntdll.dll

Many times already I have re-downloaded Skype due to problems. When I switch computer on, the warning message is shown :
title: "Skype.exe - Nie znaleziono punktu wejścia"
text: "Nie znaleziono punktu wejścia procedury NtAlpcSendWaitReceivePort w bibliotece ntdll.dll"
what means: "Skype.exe - Enter point not found"
text: "Entrance point of procedure NtAlpcSendWaitReceivePort in library ntdll.dll not found"
What is it and how to solve the problem?
annamatyjasik

This is a known issue with Skype and Samsung Kies Software. You may try to update your version of Samsung Kies Software or go to system32 folder and rename the avrt.dll file to avrt_old.dll
http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=APPS_GLB&CDCttType=SW&Mo...
http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_programs/skypeexe-entry-point-no...
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

I've never used acrobat. I've attempted to contact billing/payment through the Adobe site, but answering questions asked, I'm cycled to the same pages. I need to chat, email, or contact billing

I've never used acrobat. I've attempted to contact billing/payment through the Adobe site, but answering questions asked, I'm cycled to the same pages. I need to chat, email, or contact billing

You seem to have asked your question twice. Answred at I've never used acrobat. I've attempted to contact billing/payment through the Adobe site, but answering questions asked, I'm cycled to the same pages. I need to chat, email, or contact billing

Skype for Business & Lync : Contact icons not appe...

In our environment we have several users that are using Skype for Business, and the rest using Lync.
We have noticed that when migrating our users over to Skype for Business, the contact functionality that shows "icons" next to each person's name is now blank.
As an example, my personal icon shows up for me but none of my contacts show their customized pictures.
Lync users can see my icon and can see everyone elses.
Thank you

Hi Alan Dooley,
Have you tried to create a new desktop shortcut ?
In addition, you can try to follow the FAQ below to rebuild the icon cache.
https://social.technet.microsoft.com/Forums/windows/en-US/bea47202-d869-4155-8c8f-2a5b8bd7be1d/forum-faqhow-to-rebuild-icon-cache
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How Do I Manually Add A Skype Name To My Contacts?

I have the Skype Names for several contacts and would like to add them manually. Seems silly that I can add all sorts of telephone numbers to their profile but not their Skype Name. Anyone know how I do it?

Thanks for the answer, but that's not really what I was trying to accomplish. :-)
I like my current homepage, which is not facebook.
I found a workable solution, however... it's the "Custom Buttons" add on!
The reason I was looking for a "redirect" solution, is because if you inadvertently click the "Home" or "News Feed" links on your facebook page... it will revert you to the NEW layout, which sucks!

Error encountered attempting to contact AdminServer

I have configured a domain-wide administration port(7077) for my cluster.
     <Domain AdministrationPort="7077" AdministrationPortEnabled="true"
However when I start the managed server I got following errors:
<Sep 19, 2002 10:24:28 AM EDT> <Error> <Management> <141079> <Error encountered
attempting to contact AdminServer at https://devel:7077/wl_management_internal2/Bootstrap
to obtain configuration information. Will attempt to start an independent ManagedServer.
No server log available, Exception was: java.io.IOException: Write Channel Closed,
possible SSL handshaking or trust failure>
I have configured the Admin. server to enable SSL with following properties:
     <SSL Enabled="true" HostnameVerificationIgnored="true"
ListenPort="7076" Name="testadminserver"
ServerCertificateFileName="democert.pem"
ServerKeyFileName="demokey.pem"
TrustedCAFileName="ca.pem"/>
Following is the managed server's startup arguments:
     -Dweblogic.security.SSL.trustedCAKeyStore=/home/bchan/bea/weblogic700/serve/lib/cacerts
     -Dweblogic.security.SSL.ignoreHostnameVerification=true
     -Dweblgoic.management.server=https://devel:7077
Am I missing anything?
Brian

I have configured a domain-wide administration port(7077) for my cluster.
     <Domain AdministrationPort="7077" AdministrationPortEnabled="true"
However when I start the managed server I got following errors:
<Sep 19, 2002 10:24:28 AM EDT> <Error> <Management> <141079> <Error encountered
attempting to contact AdminServer at https://devel:7077/wl_management_internal2/Bootstrap
to obtain configuration information. Will attempt to start an independent ManagedServer.
No server log available, Exception was: java.io.IOException: Write Channel Closed,
possible SSL handshaking or trust failure>
I have configured the Admin. server to enable SSL with following properties:
     <SSL Enabled="true" HostnameVerificationIgnored="true"
ListenPort="7076" Name="testadminserver"
ServerCertificateFileName="democert.pem"
ServerKeyFileName="demokey.pem"
TrustedCAFileName="ca.pem"/>
Following is the managed server's startup arguments:
     -Dweblogic.security.SSL.trustedCAKeyStore=/home/bchan/bea/weblogic700/serve/lib/cacerts
     -Dweblogic.security.SSL.ignoreHostnameVerification=true
     -Dweblgoic.management.server=https://devel:7077
Am I missing anything?
Brian

Add Contacts to Skype Manager members accounts (Contact List)

Hi All, I tried to disucuss this over live chat but had no luck as the tech guy kept asking if I wanted to add Skype credit for voice calls :-/ Basically what im asking for help with is if its possible to create group in Skype Manager, Create accounts and make them members of that group and then create a contacts list of other Skype manager users and then auto allocate that to all users within the group so when I give out the account details to my users when they login they already have the other company users added without having to login to Skype on the web and add them manually. Seems like a basic taks of managing a business with business accounts, if it doesnt exist can I request it as an upcoming feature Thanks Shaun

Looks like this is the only way my users in Skype Manager can add contacts who are also in Skype Manager:https://support.skype.com/en/faq/FA10867/how-do-i-add-other-members-of-my-skype-manager-to-my-contact-list-in-skype This is pathetic.

Skype crashes. Can't end Skype.exe. Access is Deni...

Lately I've been encountering this problem where Skype crashes and does not let me end the process. I'll try to include as much detail as I can. When the crash occurs, it isn't really announced. You can verify the crash has occurred by simply trying to change your status to Online, Away, Do Not Disturb, etc. If you go to change your status and nothing happens, then I know this crash that I'm referring to has indeed happened. You can close Skype normally. It will close, however, the process Skype.exe won't remove from the RAM. I'm on Windows 8, and if you go to Details on my Task Manager, you can see the process is still active. The RAM usage is not fluxuating, it's as if it's stuck. If you try to end the process once, nothing happens. If you try to end it a second time or more, you'll receive a message that says "Skype.exe cannot be terminated. Access is Denied." I'm not the only one with this problem. I've read that others have encountered it, too.
The only way I can make it so I can use Skype again is to restart my computer because it's effectively the only way to clear my cache (that I know of). The occurring nature of this problem is sporadic. I tried to pinpoint it, but I just can't. Sometimes it happens when my Internet goes out. I reset my router, and when I reconnect, Skype becomes unresponsive. It doesn't only happen when I reconnect from an Internet disconnection. Sometimes it just happens without any change that I know of. I can go days without the problem occurring. Some days, the problem happens in periods that require me to restart multiple times to get it to work. Most people tell me to just use the Windows 8 version of Skype to avoid these issues, but Windows 8 lacks some of the ease of access that the Desktop version of Skype has that I've grown accustomed to as well as the ability to change the volume in my volume mixer. I'd have trouble with either version, honestly. Please respond when you can, any help and solutions will be much appreciated.
Also, I want to note that if I I try to end the process when this crash has not occurred, it does end successfully. This problem, for me, is exclusive to this crash.
My DxDiag: http://tny.cz/ea7c1ac9

I'm having the same problem
Since Microsoft take over skype I've never been able to run skype without problems. It seems that everytime they upgrade skype, this problem comes again.
The worse part is, skype crashes, can't kill process (even with procexp, and whatever solution you think work), can't open new skype, connection wifi becomes instable, and after a while I lose connection to internet, can't even do a clean shutdown because it hangs when closing (I guess because of this special skype process that can't be killed).
Every time I put the laptop to sleep, when I come in again, skype crashes, and the problem comes.
I've more windows shutdowns in this last month than I had during the last 2 years.
What is the solution ? Uninstall Skype and go for another chat/phone/video solution ? Can I've my credit money back ?
Please fix this problem. I'm really very anoid with this new SKYPE FEATURE
Thank you
JAV

CF 10 getting random resets : Detail: [Macromedia][SQLServer JDBC Driver]A problem occurred when attempting to contact the server (Server returned: Connection reset).

These resets appear to coincide with a clearing of the cached queries for the DSN from memory, breaking all my sub queries that try to use the initial cached one. I am grasping at straws to discover the reset culprit, the DSN tests always show OK, there is not packet loss at the switch level. If anyone has some suggestions, I am all ears!
The resets are completely random and under no load. My sql 2008 r2 box is set to unlimited connections.
An example of a DSN setup is :
Maintain Connections [x]
String Format [ ]
Max Pooled Statements 100
Timeout 20 Interval 7
Query Timeout 0
Login Timeout 30
CLOB [ ]
BLOB [ ]
Long Text Buffer 64000
Blob Buffer 64000
Validate Connection [ ]
I am running the following :
CF Enterprise 10,0,13,287689
Tomcat 7.0.23.0
Ubuntu 1204 x64
Java VM 20.4-b02
Java 1.6 (Sun Microsystems Inc)
I have seen it suggested to uncheck the maintain connections advanced options but this doesn't seem like a good approach to the problem and will cause more stress on the sql box IMHO.
I have also seen it suggested to enable Validate Connection but documentation on this is a bit sparse...
Here are more examples of the initial reset error and then the subsequent cache related errors :
Database Error Information:
Native Error Code: 0
SQL State: 08S01
Query Error: [Macromedia][SQLServer JDBC Driver]A problem occurred when attempting to contact the server (Server returned: Connection reset). Please ensure that the server parameters passed to the driver are correct and that the server is running. Also ensure that the maximum number of connections have not been exceeded for this server.
Custom Error Code: 08S01
Database Error Information:
Native Error Code: 0
SQL State: n/a
Query Error:
Query Of Queries runtime error.
Table named GlobalDetails was not found in memory. The name is misspelled or the table is not defined.
Custom Error Code: n/a
Thanks in advance to anyone who has a suggestion.

Hi, could DBA check MS SQL Server connection logs???
May be server has some limits (for example sessions, memory and e.t.c.)

I get a notice that says a security and stability update is recommended for Fire Fox 3.6.15. When I click to update a bar appears showing attempt to contact but nothing ever updates.

I get a notice that says a security and stability update is recommended for Fire Fox 3.6.15. When I click to update a bar appears showing attempt to contact but nothing ever updates.

Sometimes the updater gets in a funny state - Go to http://www.mozilla.org/en-US/firefox/new/ and download the full installer. Close Firefox and run the installer

Tnsping attempting to contact a different host

Hi,
In spite of accurate details in the tnsnames. ora and listener.ora files, when I am trying to ping the database name it is attempting to contact a total different host.
Oracle server version I am using is 8i. My server has multiple databases. May I know why the tnsping is attempting to connect a new host .. ? Why does it happen?
C:\>lsnrctl status LISTENER_ABC
LSNRCTL for 32-bit Windows: Version 8.1.7.4.0 - Production on
(c) Copyright 1998 Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<gave-the IP address of the host>(PORT=1530)))
STATUS of the LISTENER
Alias                     LISTENER_ABC
Version                   TNSLSNR for 32-bit Windows: Version
Start Date                22-FEB-2012 05:41:21
Uptime                    0 days 0 hr. 12 min. 40 sec
Trace Level               off
Security                  OFF
SNMP                      OFF
Listener Parameter File   D:\Oracle\ora817\network\admin\listener.ora
Listener Log File         D:\Oracle\ora817\network\log\listenener_ABC.log
Services Summary...
ABC                has 1 service handler(s)
The command completed successfullytns entries:
ABC,ABC.WORLD =
(DESCRIPTION =
    (ADDRESS_LIST =
         (ADDRESS =
          (PROTOCOL = TCP)
          (HOST = <gave the ip address of host>)(PORT = 1530) )   )
    (CONNECT_DATA =
      (SID = ABC)
)llistener:
LISTENER_ABC =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST =<gave the ip address of the hosT>)(PORT = 1530))
SID_LIST_LISTENER_ABC =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = ABC)
      (ORACLE_HOME = D:\Oracle\ora817)
      (SID_NAME =ABC)
)

878226 wrote:
Hi,
In spite of accurate details in the tnsnames. ora and listener.ora files, when I am trying to ping the database name it is attempting to contact a total different host.
Oracle server version I am using is 8i. My server has multiple databases. May I know why the tnsping is attempting to connect a new host .. ? Why does it happen?
C:\>lsnrctl status LISTENER_ABC
LSNRCTL for 32-bit Windows: Version 8.1.7.4.0 - Production on
(c) Copyright 1998 Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<gave-the IP address of the host>(PORT=1530)))
STATUS of the LISTENER
Alias                     LISTENER_ABC
Version                   TNSLSNR for 32-bit Windows: Version
Start Date                22-FEB-2012 05:41:21
Uptime                    0 days 0 hr. 12 min. 40 sec
Trace Level               off
Security                  OFF
SNMP                      OFF
Listener Parameter File   D:\Oracle\ora817\network\admin\listener.ora
Listener Log File         D:\Oracle\ora817\network\log\listenener_ABC.log
Services Summary...
ABC                has 1 service handler(s)
The command completed successfullytns entries:
ABC,ABC.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = <gave the ip address of host>)(PORT = 1530) )   )
(CONNECT_DATA =
(SID = ABC)
)llistener:
LISTENER_ABC =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =<gave the ip address of the hosT>)(PORT = 1530))
SID_LIST_LISTENER_ABC =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ABC)
(ORACLE_HOME = D:\Oracle\ora817)
(SID_NAME =ABC)
Hi,
In spite of accurate details in the tnsnames. ora and listener.ora files, when I am trying to ping the database name it is attempting to contact a total different host.
Oracle server version I am using is 8i. My server has multiple databases. May I know why the tnsping is attempting to connect a new host .. ? Why does it happen?
C:\>lsnrctl status LISTENER_ABC
LSNRCTL for 32-bit Windows: Version 8.1.7.4.0 - Production on
(c) Copyright 1998 Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<gave-the IP address of the host>(PORT=1530)))
STATUS of the LISTENER
Alias                     LISTENER_ABC
Version                   TNSLSNR for 32-bit Windows: Version
Start Date                22-FEB-2012 05:41:21
Uptime                    0 days 0 hr. 12 min. 40 sec
Trace Level               off
Security                  OFF
SNMP                      OFF
Listener Parameter File   D:\Oracle\ora817\network\admin\listener.ora
Listener Log File         D:\Oracle\ora817\network\log\listenener_ABC.log
Services Summary...
ABC                has 1 service handler(s)
The command completed successfullytns entries:
ABC,ABC.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = <gave the ip address of host>)(PORT = 1530) )   )
(CONNECT_DATA =
(SID = ABC)
)llistener:
LISTENER_ABC =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =<gave the ip address of the hosT>)(PORT = 1530))
SID_LIST_LISTENER_ABC =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ABC)
(ORACLE_HOME = D:\Oracle\ora817)
(SID_NAME =ABC)
)you claim to have a problem with tnsping but decide not to show
what you did or EXACTLY how tnsping responded.
Why are you using a non-standard listener on non-standard port?
How many different listeners are running on this single system?
When did things last work without problem?
What changed since then?

Skype.exe attempts to contact potentially maliciou...

Similar Messages

Maybe you are looking for