Skype is disconnecting and reconnecting again

Dear Sir I have a big problem , I hope you can solve it to me. I am using a samsung tab , and have a wi- fi at home. When out of home , I use the mobile internet . I downloaded skype to chat with my friends. Since I downloaded , most of the time , the skype app is disconnected I tried to find a cause , but I couldn't . I updated the app two days ago . I tried to find a problem in the setting , I didn't . So please advise me what to do . And tell me the setting adjustment to have a permanent connection . Thanks

okay I've sorta of fixed it. I don't know it just started to get recognized by the computer but I still ahve a problem. My iPod shows the apple logo and it's lit up and it's NOT GOING AWAY NO MATTER WHAT. Someone help me please.
I've like tried EVERYTHING.

Similar Messages

I started downloading ios 6 with iTunes. And at the end of the download , some kind of error comes with a pop up box and a RED cross mark in it saying some error occurred and asking to disconnect and reconnect again and to check the internet is active?

i started downloading ios 6 with iTunes with latest version of 10.7 for my iphone 4s running ios 5.1.1. And at the end of the download , some kind of error comes with a pop up box and a RED cross mark in it saying some error occurred and asking to disconnect and reconnect again and to check the internet is active? and then nothing happens and when i disconnect and reconnect again, the same error comes and the same thing happens. what should i do now to install ios 6?

Are you running any Firewalls or Anti-Virus software? If so, disable all of that stuff & try again.

Skype disconnects and reconnects alot

Ok so i have seen a couple posts with this issue but not exactly the same. My skype calls will work for the most part but then sometimes it will start to disconnect and reconnect constantly. Sometimes when i reconnect to the call i can hear the other person but they can never hear me. Sometimes when i reconnect i cant hear them at all. But every time we reconnect after the disconnecting starts they can never hear me and it keep disconnecting until i do my tempory fix i found. The only way i have found to fix this is to close skype completely and reopen it. That is the only way i have got it to work again. Any ideas why this is happening or what i can do to fix this

Hi, funbuilder030,
To help diagnose this issue more closely, some more information would be helpful:
- Hardware you use (laptop/phone/tablet brand and model)
- Operating system (version and updates installed)
- Skype version used
- Internet connection used and the carrier
Anticipating what Community Ambassador Ruwim may also ask,
Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.
... and also,
Open Windows Event Viewer * -> Custom Views -> Administrative Events. Look for any recent error messages with timestamp corresponding to Skype crash. Copy and paste here the text from the General tab.
* http://windows.microsoft.com/en-us/windows/open-event-viewer#1TC=windows-7
You can also right click on the Computer or My Computer icon and select Manage.
Providing all of this information will help our Community's diagnosticians! Thanks in advance.
On behalf of the Skype Community Moderation Team,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

In Windows 7, iTunes gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again.

In Windows 7, iTunes gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again."
I have a iphone 4S. It has been activated on Win 7 computer and synced. But overnight this meassage reappears.

I have same error except that i get it even when my phone is not connected.

IPod sync failed. Disconnect and reconnect, then try again.

Over the past month or two, I have gotten this message quite frequently with my iPod. It usually happens after I sync my iPod once, leave it hooked up to my iMac for charging, and then try to sync again (sometimes not even more than a few minutes later). I also often have trouble getting my computer to recognize the iPod (or getting my iPod to recognize that it's supposed to start syncing) without having to disconnect and reconnect it and shake the USB cord around a few times.
I had a little bit of this problem with my iPod 5G and XP PC, though no "iPod sync failed" messages ever. This is a new iPod classic and an iMac. What's going on?
Does anyone else have this happen to them?

I'd been having this same issue and kept trying all the suggestions on the forums to no avail. Then I just disabled "Enable Disk Use", which required me to first disable "Manually manage music & videos". I unchecked all of my music, videos, podcasts and photos, applied the settings, then chose which media I wanted in my iPod. I synced successfully and even cleared it out completely a couple of times to re-sync. No issues anymore.

ICloud mail does not reconnect in Mail application on MacBook Pro after disconnecting and reconnecting iPhone or after sleep

iCloud mail does not reconnect in Mail on my MacBook Pro after sleep or after disconnecting and reconnecting my iPhone. This only happens when I use my iPhone as a 3G-modem and not when I am on Wi-Fi. The only solution seems to be to quit the Mail-application and restart it again. Then Mail reconnects to iCloud.

Hi horstp,
Given your description of the issue (works on other Macs), it may be worth trying to set up that account by itself in a new test user on the iMac to see if it can be isolated to a user-specific file. You may find the following article helpful:
Apple Support: Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
Regards,
- Brenden

Must disconnect and reconnect earbuds to restore audio

I've noticed that if my iPod Touch shuts down on its own, when I turn in back on the volume slider doesn't appear. I have to disconnect and then reconnect the earbud plug in order to see it and to allow audio output through the earbuds. I'm using 4.1 now, but this has been going on for several months. Anybody else notice this and know what's going on? It's a 2nd generation Touch.

Stephen Patriquen1 is correct: the link given by allen a does not address the problem described in the header by ChubbyCherub, namely "The software for the iPad was corrupted during download. Disconnect and reconnect, then try again."
Like ChubbyCherub,I have faithfully and completely followed all the troubleshooting directions given, including also unplugging USB devices, even though I don’t believe any of them are relevant to a corrupted download, and repeatedly re-tried the download, to no avail.
So what is required, allen a, is a solution related to the original question that doesn’t involve doing the same thing over and over in hopes of a different outcome.
In the meantime, my iPad has been stuck in recovery mode for days.

Several times a day my HP Laptop disconnects and reconnects to my WRT600N router.

I’ve installed a new WRT600N. (Firmware Version: 1.01.35 build 5_20080115).
My install was a “Linksys EasyLink Advisor” guided and is generic. SPI Firewall Protection is enabled. Security Mode is enabled for WPA-Personal.
The laptop I use with router is an HP/Compaq 6710b (also new), running XP Pro. The built-in WiFi adapter is a “G” type (Intel PRO/Wireless 394ABG) with “Windows Wireless Network Connection” enabled.
Presently I don’t use the “N” capability of the router. However, I plan buy a 2nd laptop with an “N” WiFi adapter soon.
The router works well…most of the time. Signal strength is “Very Good”. However, several times a day my HP Laptop disconnects and reconnects to the router.
Each time this happens I get a “Linksys EasyLink Advisor” prompt stating “Network Problem!...the connection to the router is not working”.
After experimentation I realize that most often the connection will restore by itself…or worst case; I can re-detect and restore the connection using either the “Linksys EasyLink Advisor” wizard OR the “Windows Wireless Network Connection” wizard.
Besides losing the connection, the most annoying part of this is that after the connection is restored and the “Linksys EasyLink Advisor” wizard message remain indicating: “Network Problem!...the connection to the router is not working”.
Suggestions?

There are many causes for poor wireless connections, and many solutions:
First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. If your current network is not listed, enter its info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".
If the above does not fix your problem, download and install the latest driver for your wireless card.
Some users have reported improved wireless performance by switching from WEP to WPA encryption.
If you continue to have problems, try the following:
For wireless n routers, try setting the "n Transmission Rate" to 162 Mbps, and the (wireless g) "Transmission Rate" to 54 Mbps.
If you still have trouble, download and install the latest firmware for your router. After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Hope this helps.

Ipod disconnects and reconnects

My iPod keeps disconnecting and reconnecting to my computer. This is really annoying because it will only appear under devices for a few seconds before disconnecting. Then after about 10 seconds it will connect again and appear under devices again. Why is this happening?
iPod Nano (1GB) Windows XP

Mine is doing a similar act. It'll sorta update and then disconnect. This is getting very annoying. I've done everything short of re-installing windows xp!
Athlon 4800 Dualcore Windows XP Pro 2 GB Ram, SP2

Macbook won't start or charge unless I disconnect and reconnect the battery connector each time .

I have a late 2011 model Macbook Pro, 10.7.5 OS and I've had no issues whatsoever up until a week ago. The night before if stopped working I did everything as usual, did some HW, emailing then I shut it down. I woke up the next morning and it wouldn't turn on so I figured it was dead, so I got my charger plugged it in and got no light, green or orange. What I got was a faint green blinking on the charger light and my battery level indicator wasn't working. I thought it was my charger but it wasn't because worked fine on my girlfriend's Macbook.
I googled and tried PRAM and SMC to no avail. When I tried the SMC I didn't take the battery out I just disconnected the connector (Don't know if it makes a difference) and Voila it worked and I thought I fixed the problem. I turned it off and the next day the same thing, I have to disconnect and reconnect the battery connector each time for it work. Other than this issue I have no problems, mac runs fine while it's on and I shut it down or restart it for awhile after I reconnected the battery but if I try to turn it back on or restart it hours after I've done that then it won't work . One thing I may add is after I reconnect and plug my charger in, the light is green for about 5 seconds (even though it's not fully charged) then turns orange .
I'm guessing I need a new battery or logic board , but I'll keep my fingers crossed .
I won't be able to set up an appointment until next week but I would like to see if I could get any help here in in the meanwhile.
Thanks !

Hi, I dont know if this may be the cause as i too have the same problem. But it only occurs after i disconnect my Iphone from my macbook pro.
The Macbook has worked perfectly and then all of a sudden last week it started to shut down after i would disconnect my Iphone 5.
The mac wouldn't restart, charge or anything.
I tried all the trouble shooting reccommended, Shift Alt command button combinations. ( there were a fair few ) None worked.
Then i found out about disconnecting the connector.
This fixed the problem.
But alas, It done it again after my next sync.
This has done it 4 times now. And only when i disconnect the iphone after using itunes on the mac. I done it all correctly 3 times and the 4th time i just pulled it out with out ejecting from itunes, but still done it.
The iphone Syncs perfectly. I get everything i want onto the iphone. But for some reason as soon as the cord is disconnected from the mac BOOM. Dead mac.
If i leave the cord and the phone plugged in but still eject the phone it doesnt shutdown tho.
I found if i shutdown the macbook, then disconnect the iphone cord once the mac is completely shut down then my mac will start back up again with no problems.
As i said i dont know if this is the cause of your problem and if it will help you or not? But if not, maybe it will help someone else out who finds your post?
Hope you get your problem sorted
Chris

My gmail account continually disconnects and reconnects every few seconds.

I am using FF 19.0.2. I have multiple gmail accounts. One of them continually disconnects and reconnects every 5 to 10 seconds. It only happens with the one account. It only happens in Firefox. I am using Windows 7 64 bit.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

When leave I nano 4th gen connected to either of my cars it no longer restarts playing when car is restarted. Instead it shows 'no entry' in the song title on the car audio display and won't play until disconnected and reconnected.

Nano has worked fine for a couple of years being left connected to either one of our cars. However, every time car is restarted it won't play without being disconnected and reconnected. I have done a full restore.
Current cars are Range Rover Sport 2011 and Jaguar XK 2011.
Has anyone else experienced this issue?
Thanks,

I had a similar problem. Try resetting and erasing the phone and restoring from a known good backup.

I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.

BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton

I have an iphone 6 plus which show iphone disable connect to itunes. i tried to restore but it won't work and everytime it says "Iphone "Iphone" could not be restored because firmware file is corrupted disconnect and try again later"

last night while i was sleeping at somone has tried to open my passcode if Iphone 6 plus model A1524. Now i cannot see the passcode screen and it just saysi phone is disable connect to itunes . Then i decided to restore my iphone and i have download almost 4 firmware files (iPhone7,1_8.3_12F70_Restore.ipsw and iPhone7,1_8.0_12A366_Restore.ipsw and iPhone7,1_8.0.1_12A402_Restore.ipsw and fourth one is iPhone7,1_8.2_12D508_Restore.ipsw.part) and restore (by holding shift in itunes and selecting file ) using itunes ( which is current version 12.1.2.27 64 bit) but for everytime two of them(while extracting ) which are (iPhone7,1_8.3_12F70_Restore.ipsw and iPhone7,1_8.2_12D508_Restore.ipsw.part) it says "Iphone "Iphone" could not be restored becuse firmware file was corrupted please disconnect and try again later" .i have tried to download "iPhone7,1_8.3_12F70_Restore.ipsw " manually and via itunes (when i download and restore using itunes it says
"There was a problem downloading the software for the iPhone ''iPhone'' A unknown error occured (9006).
Make sure your networks settings are correct and your network connection is active, or try again.''
but nothing works (While for rest of two it says firmware file is not compatible).. I'm tired of these now as i'm working on this problem for 5 days ...
Please help me as soon as possible..
sorry for my poor english..

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

TS3474 iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.

What do I do about this message? I've restored it 3 times, but this message still comes up, and i cannot put music on it now.
iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.

Sounds like your iPod is broken. Take it to Apple or someone else who repairs iPods and see if you can get it fixed, or get it replaced.

Skype is disconnecting and reconnecting again

Similar Messages

Maybe you are looking for