Skype message / text box disappears / does not show in Mac Yosemite version

After making a call the text box disappears. No amount of scrolling or clicking makes it appear again. I saw a reply from a Skype employee three weeks ago saying the development team is aware of it and is working on a fix. But it still keeps on happening over and over. Only way I've found to fix it (as have other community members) is to restart the program.

Having the same issue, it would be nice to have this fixed ASAP.

Similar Messages

I have an I phone 4s and I have many contacts in my phone. However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number. I have checked every setting I can think of ?

I have an I phone 4s and I have many contacts in my phone. However, when my phone rings or I receive a message. The phone does not show the name of the caller. It only shows the phone number that is calling. I am sure this is a setting problem, but I have checked every setting I can think of. Any suggestions??

If you are a Verizon user try this:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again and see if it's fixed.

Reply/forward to a message from iPhone, Outlook does not show status

If you reply to a message from iPhone, Outlook does not show status (if replied or forwarded the message). The iPhone indicates the reply/forward icon however in Outlook I would have no idea if I responded to that message.

You're right. Had not noticed it before. Hopefully Apple will fix this in one of their future releases.

HP C6380 photosmart all in one wireless does not show in mac printers

I have a new MacBook Pro and an "old" HP C6380 photosmart printer/scanner. It is connected to my wireless network but does not show on Mac to choose to add as a printer. What can I do? I do not want to buy a new printer!

Never mind. It just won't work wirelessly. I connected to router with cable & it works OK.

I am unable to update CC. It's starts ok and then stops without warning or message My Adobe ID does not show that I am a CC subscriber

My Adobe ID does not show that I am a CC subscriber

Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

I keep getting this error message "Your operating system does not support the 64-bit version of Silverlight" even though I have a 64 bit system?

Netflix requires Microsoft Silverlight plug in to view their videos. Every time I try to load it I get the following error message...Your operating system does not support the 64-bit version of Silverlight. I have a 64bit system with Windows Vista Home Premium. Firefox 33.0 is installed.
Any suggestions?

Your User Agent: Mozilla/5.0 (Windows NT 6.0; '''WOW64'''; rv:33.0) Gecko/20100101 Firefox/33.0
As said Firefox for Windows from mozilla.org is a 32-bit application. The WOW64 in UA means it is a 32-bit application on 64-bit Windows.
Before you ask if there will be a Win64 version of Firefox. If all goes well the first phase of having Win64 for Release may be as early as Firefox 37.0
https://wiki.mozilla.org/Firefox/win64

Dynamic action on text box change does not working

i have a page with following components.
a report that has and edit link.
a text box to catch the primary key from report link when it is clicked
a number of elements (text boxes, check boxes and LOVs) which are used as data entry form.
Now my design is that user enter values save them and no sooner did they save, the report depicts new
values. if user want to edit any record, they click on edit link and the data entry form elements
should now bring all those values from DB on page. i m successful to pick primary key and bring
it in a hidden text box and wrote a dynamic action on its change event that will bring values from
DB and set all page elements. but but but.........the change event doesnt work. it only work
when focus is lost from the text box...!! offcourse user wont want to click in that "hiddent" text
box and then click some where else to bring values in page data entry form......
help is humbly requested from forum or if any other solution approach is to be used easier than
one i m using, would be appreciated.
thanks in advance for reading my bore question :)

bundles of thanks for reply. i m going to elaborate.
1. My page no is 3.
2. Hidden Item name is P3_EDIT_ACTIVITY_ID
3. Data entry form, hidden item and the report are on the same page.
4. on the edit link of report, i have used following settings.
    Target: Page in this application
     Page: 3
     and i set hidden item as follows......
     Item 1   P3_EDIT_ACTIVITY_ID         Value #ACTIVITY_ID#
   well, when i click the link on report it does bring Activity_Id in the hidden box (which is not yet hidden for debugging purpose)
Next i wrote Dynamic action which fires on the change event of P3_EDIT_ACTIVITY_ID and run PL/SQL code with in it which is as follows
declare
Dept varchar(50);
begin
   select my_dept into Dept from activity_main ACTIVITY_ID = :P3_EDIT_ACTIVITY_ID;
   :P3_Dept := :Dept;          (i did use :P3_Dept := Dept also but this wont work)
insert into testdynamic (stamp) values (Dept); (I did this to check whether correct value is brought from DB, yes it works correctly, correct Dept is being inserted in stamp column)
end;
i have created another true action to check when the dynamic action is fired. its very simple alert. and the problem is, it only fires when focus is lost from the P3_EDIT_ACTIVITY_ID. i mean, when u keep changing value inside the text box, nothing happens, when u go outside, the alert is fired and so the pl/sql procedure. but the line
    :P3_Dept := :Dept;       OR      :P3_Dept := Dept;         arent working which is the actual requirement.
I m not using set value here as i have to set a lot of values on page not one. further. plz let me get rid of this lost focus thing as i want the form to be populated with correct values related to P3_EDIT_ACTIVITY_ID as the user click on any edit_link in the report.
Thanks for persistence. i hope i have provided all the details.
looking forward.

Messages Text Invitation Alert does not seem to work with AIM account

Back in the days of iChat - I had a Text Invitation Alert setup to play a sound and repeat that sound. This way if I was away from my computer, it would keep making noise until I accepted/declined the IM.
Now I upgraded to Mountain Lion and am using Messages which replaced iChat. The only account that I have is an AOL Instant Messager (AIM) account. During the upgrade, it kept my setting of a Text Invitation Alert set to repeat.
A couple of things that I notice - when I closed an iChat conversation, that was the end of the conversation and a message from someone after that point was treated like a new Text Invitation. With Messages - I actually have to 'delete the conversation' as all of my conversations are in the same application window.
Here is where the problem comes in... having NO active conversations (i.e. nothing is shown on the right side of the Messages window except 'No Conversations') and having the application closed but my status set to Available - it does NOT play the Alert sound, only bounces the dock icon once.
Having NO active conversations but the application running in the background it performs as expected.
With iChat, a text invitation was treated the same way if the application was closed or if it was running in the background.
Since my default is to have the application closed (with my status as Available), I am looking for Messages to provide the same functionality with regards to Alerts.
Any help?
Thanks,
Red

Your pop account won't work with iCloud, it's the alternate me address you get when you create an iCloud account that works with iCloud. Outlook won't work with iCloud either, you need to use Address Book, iCal etc etc.

Scroll Bar does not show using Mac OS X 10.10.1, Thunderbird 31.3.0

I upgraded to Thunderbird 31.3.0, running Mac OS X 10.10.1. The scroll bars in both the inbox window and the message text window seem to have disappeared. There does not seem to be any support available on this.

''Matt [[#answer-671555|said]]''
<blockquote>
Ok so you most likely have an add-on or theme that is not compatible with the current version. Check in the add-ons manager for updates. Disable all add-ons and enable one at a time until the culprit is found.
How does OSX 10.10.1 handle scroll bars. Perhaps appearing and disappearing is a new mac feature. Windows hiding menu bars is an infuriating OS feature, perhaps it is the mac users turn.
</blockquote>
Turns out, this is the case.
If I drag two fingers over the Track Pad, the Scroll Bar does appear. If I don't let go of the Track Pad, and roll over to the Track Bar it stays up. I hate it, but now I have a work-around.
Thank you, Matt.

Bonjour tab in safari does not show any Macs

Hi there,
I have a lan and it has 4 macs, a printer and a tivo on it. (and a couple of other things as well)
When I open safari on a mac (any mac) the Bonjour bookmarks show ONLY the printer and the tivo, and NO macs.
I assume I should see the machine names of all active macs, and be taken to the website for their active accounts if I click on them.
Is that accurate? I assumed bonjour was to enable me see other macs on my net work but I can't. (iChat seems to work fine, as does iTunes for sharing) I'm only trying to find the webpages for the macs on my net via bonjour.
Thanks,
John Schank
P.S. I CAN see the machines if I use their net name in the safari address line...For example, typing foo.local in the address bar DOES take me to the default apache page for the foo machine. However, foo does NOT ever show up in the bonjour bookmarks of safari.

I'm troubled by these answers because they seem to further muddy the water. Here's the important concept -
All links in the TEMPLATE file should be one of three kinds -
1. Relative to the template file, e.g.,
<a href="../ (meaning that you must go up one level from the template folder
to reach the root of the site, hence all other files, since none of them
should be in the templates folder)
2. Relative to the site root, e.g.,
<a href="/ (meaning that one would begin looking for the linked file at the
root of the site and follow the pathing from that point)
3. Absolute, e.g.,
<a href="http:// (meaning that the link is to a page external to the site).
Seems that none of the suggestions are putting you on that path first.

Shockwave does not work in firefox but does in ie. it does not show content. worked in version 3 of firefox not in 5.

adobe shockwave player does not work in newest version of firefox (v.5). it does work in internet explorer though. and it also worked before in version 3.

Do not confuse Shockwave for Director and Shockwave Flash.
*https://support.mozilla.com/kb/Managing+the+Flash+plugin
*https://support.mozilla.com/kb/Using+the+Shockwave+plugin+with+Firefox
Both are different programs (plugins), so there is most likely no need to look at Shockwave for Director.
Does Flash work properly on the Abode welcome (test) page?
*http://www.adobe.com/software/flash/about/

HP laserjet p1102w does not work with Mac computer version 10.8

since i upgraded my Mac to 10.8 operating system, I am not able to use the ePrint function from my HP Laserjet P1102W printer. I was told that the current version of the firmware 20130213 does not support this function. Does anyone know when the new version of the firmware will be available to support this function? thanks much.
This question was solved.
View Solution.

Manual, Please let me know the outcome.

HT5295 How can I see the transcript text? It does not show it.

I get podcasts from the RN site. All of them are transcripted for ease to the user to find names and review the contents. The old application showe the text on top of the artwork as a transparency and you could scroll as with any other text. Since the update to iOS6 and to the podcast app I CAN NOT SEE THE TEXT!!! They forgot to add an essential part to podcast; the additional information provided by podcasters! Let me know of alternative ways to access the transcript text. Thanks.

Swipe up from the very bottom of the screen to bring up the control Center. Tap on the Orientation Lock icon. It is the circular arrow surrounding a small padlock. This icon will then appear at the top of your screen near the battery indicator and your screen will not rotate.

Message added with addmessage() does not show immediately.

Hi,
JDeveloper 11.1.1.2.
At the end of a fileupload ( code based on these instructions http://docs.oracle.com/html/E18745_01/devguide/fileUpload.html)
a message should show that the file was uploaded.
But the meassge is only shown if the user pushes the Update button (to alter the filename).
Can anyone explain why?
Best regards
Erik

Hi,
you don't provide information about how you add the message. I assume you add it to the FacesMessage (but this is just a guess). The reason you don't see the upload may be because the af:messages tag doesn't get refreshed in response to the input file upload. So better probably to launch a popup dialog yourself after the upload finished
Frank

When adding a PDF file to a New Message in Mail it does not show up as an icon link, the entire document appears. How can you attach a PDF without the entire document displaying itself?

After scanning a document, I save the file in a PDF format. When attaching the PDF file to a New message it appears on the entire page instead of a PDF icon link that the recipient can click on to open. Why can't I get the PDF file to appear in a icon format? Thank you.

Control mouse click the document and select View as icon.

Skype message / text box disappears / does not show in Mac Yosemite version

Similar Messages

Maybe you are looking for