Skype not notifying (oange flash) for only one con...

I've been having the issue of skype not giving me an orange flashing taskbar notification for only one of my contacts.
Strangely, this does not always happen. Sometimes this contact's messages will in fact make my taskbar flash. Other times it will not. I can add that both the contact and I have our status on "online", furthermore I have checked the following suggestion I found here on the forums but it did not work as it was already properly set to always notify me:
Highlight the contacts name in the Contacts list so you can see the chat window for this contact. Click on the Conversation menu and select Notification settings. Select there the appropriate option for the notifications.
Any ideas? This has really been going on for at least a few months, perhaps a year

Well, that is hard to tell. Like I said the website may have updated their technology. Just because it works with the Desktop, doesn't mean there is not a reason that the laptop might not have a problem. You have 2 different systems and
most likely different configurations.
You may want to check Tools and in the add ons for both, look for Shockwave Flash Object...ActiveX Control..Flash10e.ocx should be installed and enabled.
Also for each check C:\Windows\System32\Macromed\Flash Right click the Flash folder and make sure for IE that the files are vs 10.0.45.2 by checking the properties.
If you have the correct Flash files and the correct SWO then, some other cause would be looked at.
It has been my experience to not "assume", but verify:-)
Thanks,
eidnolb

Similar Messages

Why is print in grey and PDF not a saving option for only one of my photoshop files? All other files I open are fine. Please help!

I am trying to turn a photoshop document in to a pdf. Print is in grey and under Save As PDF is not an option. Any other PS document I open allows me both options. What is wrong with this document?!
What I have tried and was unsuccessful:
I changed it to illustrator and saved as PDF but the colors were very dark.
I have renamed it and opened again.
I duplicated the layers to another doc.
Closed PS and opened it again.
Please help. Thanks!

Here is what I see...
It is in RGB color / 32 bits/channel
Any suggestions?

How can I correct that emails for only one of my address going direct to my trash file before even being read and this just started a while back not before?

have been living with this for a while, do not remember when it started and have already try different ways a solving the problem but nothing has corrected the situation.

thanks for ur suggestion, no help. still goes to trash for only one of my email addresses, other two no problem.

PDF file not generating for only one Invoice billing document

Hi all,
We have upgraded our system into ECC6.0 from 4.7 version. During our Testing time, we have found the following Bug:
Bug: Not possible to get output in pdf format for only one Invoice type(TR code: VF02) except for all it is generating PDF output.
Can anybody help me out to find the route cause for this problem.
Regards,
Murali.

Hi,
For one Billing-Invoice type , PDF is not generating. But it is generating for other Invoices.
So should i need to go through the Printer settings?
Regards,
Murali.

Changing DB character set for only one schema

We are interested in changing the characterset of only one user from Western European to AL32UTF8.
Could you please verify if the following steps will be correct to do the same.
1. Run CSScan on the one user
2. Fix any issues
3. Export that one user (with NLS_LANG set to <your old database character set>)
4. Create a new database in the AL32UTF8 character set
5. Import that one user into the new database (with NLS_LANG set to <your old database character set>)

Actually your title is a little incorrect. You are not changing CS for only one schema in existing DB which is not possible. You are trying to migrate a schema to new CS DB. Which is totally doable and your approach is mostly correct.
Database Character Set Scanner provide user scan mode
http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch12scanner.htm#i1006013
Mostly the issue could be data truncation, especially if you have column defined using char or varchar2 vs nchar and nvarchar2
because char/varchar is defined in bytes, AL32UTF8 is multi-bytes char set, some character of your old data could saved more than 1 bytes in new DB and can't fit into the column size.

Program installed for only one user

Have a program that is installed for only one user, how can I get another user access to the software? don't have install disk.
Thanks

Select the application's icon then Press COMMAND-I to open the Get Info window. In the Ownership and Sharing section check the owner and group assignments. If they have owner=you and group=you or staff, then you must change those. Open the Terminal application in the Utilities folder and enter the following command line at the prompt:
sudo chown -R root:admin
Put a space after "admin' then drag the application's icon into the Terminal window and press RETURN. You will be prompted for your admin password which will not be echoed.
This should enable other users to access the application provided you have given the user access via their managed account preferences in Accounts preferences.

ChaRM scenario for only one productive system

Hi CHaRM-experts!
I would like to know whether or not is it possible to use the Change Request Management scenarion for only one productive system?
It means we have systems and cases where we should apply the emergency correction only in productive system, without any transport from DEV or QAS system.
Does ChaRM support such case?
Thank you very much!
regards
Thom

Hi Don,
thank you very much for your answer.
No, I do not plan any transport in the productive system.
I would just make any adminstrative changes without transport.
Does ChaRM support such scenarios?
Thank you!
regards
Thom

ITunes download is extremely slow or not working, am I the only one experiencing this, iTunes download is extremely slow or not working, am I the only one experiencing this

iTunes download is extremely slow or not working, am I the only one experiencing this, iTunes download is extremely slow or not working, am I the only one experiencing this?

I do not have a solution, just the same complaint. ***! ! I just used the iTunes store 2 weeks ago and now, after reviewing everything they asked for including ID/Pass/ Account Info etc. I can't even get into the store. I have tried asking at the Mac store and it has all been to no avail. I was perfectly happy with iTunes before all of this ********... seriously what is the issue with iTunes? They ask me to upload a new version (with no system specs anywhere that I can find on the page) and then say it can't utilized because of system inadequacy. It is exceedingly frustrating.

I would need to install Adobe Connect Add-in Test for only one webinar. When I pressed instal button - it said to me - it cannot be written on hard disc. Could you help me, please. Bretislav

I would need to install Adobe Connect Add-in Test for only one webinar. When I pressed instal button - it said to me - it cannot be written on hard disc. Could you help me, please. Bretislav

After posting my concern/question, especially in regards to the optical drive, I read this on this forum:
Jul 11, 2011 5:21 AM
I would like to update my macbook pro from Tiger to Snow Leopard, but my optical drive is not working. Can I take my macbook pro into the apple store and have them install it via a portable drive?
MacBook Pro, Optical drive is no longer working
Another poster replied, "Yes, I believe they will."
Is this true? Can someone verify this? Any idea of cost? I really don't need my optical drive. Besides, end of year, I'm getting a new Mack Book Pro.

HT1349 Win 7 64 bit: iTunes won't install, get error code 2324 or installer says I am not logged on as administrator: only one user and it is an administrator user.

Win 7 64 bit: iTunes won't install, get error code 2324 or installer says I am not logged on as administrator: only one user and it is an administrator user.

Hey there k8ei,
Thank you for using Apple Support Communities
I found this article for you to help troubleshoot installing iTunes named Trouble installing iTunes or QuickTime for Windows found here http://support.apple.com/kb/HT1926.
Here is a general overview on where the troubleshooting will take you:
General installation troubleshooting
1. Empty your Temp directory and restart
2. Completely remove iTunes and related components
3. Install the latest version of iTunes
Additional troubleshooting
After performing each of the steps below, you will need to completely remove iTunes and related components and then install iTunes again to determine whether the issue is resolved.
1. Make sure you have administrator account access
2. Make sure your folder names don't contain strange characters
3. Get the latest Windows updates
4. Disable other conflicting software
All the very best,
Sterling

Way to refresh cache for only one service

Is there a way to refresh cache for only one service?
Rewards points guaranteed.
Regards.

Is this really a problem? Why not invalidating the cache alt all
when it seems to be necessary?
regards
Tobias

How to set a keyframe with setValueAtTime for only one axis?

Hi,
I´d like to set a keyframe for the layer´s scale, anchor point values but separately. Let´s say I want to add the following keyframes to a layer:
time: 0, value: 100, axis: X
time: 0.3, value: 10, axis: Y
time: 1, value: 110, axis: X
If I use setValueAtTime(time ,[x, y]) it always places a keyframe for both axis.
How can I set a keyframe with setValueAtTime for only one axis?
Regards,
Thomas

Dan, thanks for your fast reply. But the problem is a bit difficult to describe for a german like me
I´m try to convert given keyframes from another application. Let me visually show how it handles keyframes that are set on different axis at different times:
X: O---O---O
Y: ---O--O-O
You see when the user sets a keyframe and both axis were modified, both have a keyframe (see the last key). But if only one axis is transformed and the other not, there is only one keyframe. The problem that I try to solve is that AE is only able to set a keyframe for both axis at a given time. So if I set the 3 keyframes of the X axis first, the AE script will set keys on the Y axis simultaneously. That´s bad because it adds keyframe to the other axis where there is no value "cache". So if I would set all keyframes it would look like this:
X: O--•O-•-O
Y: •--O•-O-O
The small dots indicate those "forced" in-between keys.
So is there a "native" scripting way to separate the dimensions (like the position prop) for other props and add independent keyframes?

Tacacs authentication fails for one user account for only one switch

Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
              Socket opens:        157
             Socket closes:        156
             Socket aborts:        303
             Socket errors:          1
           Socket Timeouts:          2
   Failed Connect Attempts:          0
        Total Packets Sent:       1703
        Total Packets Recv:       1243
          Expected Replies:          0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
Prasey

Hi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad

Can I show a data label for only one point in a series?

Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
There are a number of graphs where I only want to value of either an extreme value or the ending value to show. Having all the labels in a series makes the chart too busy. This is pretty easy to do in Excel.
If this can't be done, I guess that adding a text box over those points would work.
Thanks

Hi W-T,
Welcome to Apple Discussions and the Numbers '09 forum.
wahoo_tiger wrote:
Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
Sure. Here's and example labeling only the MIN and MAX points.
Column B contains the data charted with the blue line.
Column C extracts the MIN and MAX values using the formula below. Those two values are charted as a separate series, using the green data point markers, and are labeled with their values. The intervening empty string values appear to have doused the lines connecting the two data points.
Formula: =IF(OR(B=MAX(B),B=MIN(B)),B,"")
Regards,
Barry

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.
<Email Edited By Host>

These are user-to-user forums - I've asked the hosts to remove your email address from your post.
Tou can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Skype not notifying (oange flash) for only one con...

Similar Messages

Maybe you are looking for