Skype not starting after clicking on the icon.
Skype not working. I have done everything possible from reinstalling/uninstalling, to doing physical hardware inspections and memory checks as well as restoring to FACTORY mode.
I have a decent understanding of computers so I am absolutely baffled.
Things to note:
-Every time I click the skype icon and it does not open, instances of it open in tskmanager.
-NO RAM damage or physical damage
-Restored to Factory Mode
-Done malware and virus checks
-Did a wipe of free Hard Drive space and after, some issues occured.
I have a DxDiag if needed.
CodedApple
Attachments:
87aedab3224716f6afb63f314c8672ff.png 43 KB
Ankur_Raina wrote:
I followed all the steps mentioned but skype is still not working.
It shows in my task manager, thats about it.
I have uninstalled, restarted whole system numerous times.
What version of Windows are you on (XP, Vista, Windows 7, Windows 8 )? Is it 32-bit or 64-bit?
http://support.microsoft.com/kb/827218
What is the version of Internet Explorer installed on your computer?
In Internet Explorer go to Help -> About Internet Explorer.
P.S. Please, don’t say that you are not using Internet Explorer. This is irrelevant. Skype depends on Internet Explorer.
Similar Messages
-
Firefox does not start by clicking on the icon in RHEL 5.
Firefox does not start by clicking on the icon in RHEL 5 on thin clients, also the internet proxy server usename is not accepted for java applets on webpages. However while using Firefox on the servers directly everthing works fine. This issue occurs on a server thin client environment, where the home directories are located on a 5 TB storage connected using SAS cables to the servers.
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls -
Hierarchy Viewer does not load after clicking on the + icon
Premise: I have a hierarchy viewer with multiple levels of master-detail with different VOs.
The inputs to the taskflow containing this page are the key and VO type. The tree should render until that VO which matches the type and key and all the next level children under it. The user can expand the nodes under these children at will to drill further.
Issue: I am able to render the tree with results. When I click on the + icon to drill on the children, I see that the backend code for fetching the children is called. But, the tree does not display. It shows the loading icon forever.
Example:
Organization - PO - POItem - Vendor - VendorSite -VendorAddress
- Responsible - ContactDetails
- Project - SubProject - Location
TaskFlow Input: Vendor, 12345
The tree should dispaly Organization - PO - POItem - Vendor(12345) - VendorSite(for 12345)
-Responsible(for 12345)
If the user expands any of the VendorSites, the VendorAddresses should be shown
Technical Details: JDeveloper Version: 11.1.2.1.0
Code: To filter the children, I am overriding the CreateViewLinkAccessorRS in the VOImpls. I am passing bind variables to the VO criterion to check the paths.@Arunkumar: Yes, I ran the AM tester and I am able to see the results properly for all the VOs and levels.
I created a sample on the HR Schema and tested. I see that when I click on the Employee node for expansion(can be checked with the data or the short description), it hangs with the load icon.
I do not see anything in the log other than:
<RegionRenderer> <encodeAll> The region component with id: r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
I do not see any upload options here to give my testcase. So, I uploaded to this link: https://www.dropbox.com/s/vybip3owzuziz86/HRHierarchyViewer.zip
Please let me know if I can do this elsewhere for easy access.
Message was edited by: Divya Bellamkonda -
I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.
Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
Thank You!
I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
Incidentally, whats up with all of the Java Console Add Ons?
I have:
Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
Also, .NET Framework 0.0.0 Should I uninstall it? -
There is a 3 inch section of the window that will not respond or recognize the mouse. It will not let you click on the icons or screen in any way. This is the only program we are experiencing this problem with.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
HT5361 I cannot open my mail program even after clicking on the icon.
I cannot open my mail program even after clicking on the icon.
Mail did launch. Now I'm not receiving new mail.
I may have forgotten my password. -
I just upgrade my wife's IPad to OS7, and now she has to go through three steps to start a game. Is there a way to go back to the older way, which was just to click on the icon for the particular game she wants to play?
Go to the table of contents is one is shown at the top of the page and then use the left arrow key or click on the left side of the page to move back to the cover page. If there is no ToC then just use the left arrow key or click on the left side of the page to move back to the cover page.
-
Firefox won't start whenI click on the icon; info on help page doesn't help
I have Windows XP and Verizon Internet Security Suite. I've installed Firefox twice (with an uninstall in between) and it still won't load when I double-click on the icon. It runs fine on my other laptop with same OS and same anti-virus/firewall. Info on help page doesn't actually address this problem, even though the headline indicates it does.
== This happened ==
Every time Firefox opened
== Firefox has never actually opened. I double-click the icon and nothing happens. Check task mgr, it's not listed. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)See my update at 6:46PST - having the very same problem on a MacBook Pro. Someone named "Sherry" posted around 5:42PST w/ same problem. No techies are picking up on these posts, though. Please add a comment to mine as well to keep it at the top and see if we can get some visibility to what is obviously a bug.
Did you upload a new version/update? That is what caused my problem -
Upgraded to Firefox 24 and now nothing at all works despite uninstalling and reinstalling it several times and losing all my bookmarks etc. However it does start in safe mode. At first I thought it was my security Norton 360 but after 2 hours in contact with them I'm still in the same position. When I double click on the Firefox icon I can see the cursor timing out and then it just disappears and nothing loads.
My OS is Windows Vista Premium and I am using Windows internet explorer at the moment.
HELP please!!!Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
After the PC boots up I click on the firefox icon in the start menu, the hour glass appears but then goes out and nothing happens. I have to re install firefox using safari (which opens) and took 4 hours.
Hello kkhelp, can you open firefox in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#os=winxp&browser=fx24 safe mode] by holding down the shift key while starting Firefox. ? (DON'T Reset firefox, select Start in Safe Mode).
thank you -
Firefox will not start after I downloaded the newest version
Firefox used to work on my computer but will not start now that I have downloaded the newest version.
See [[Firefox will not start]]
If you issue is resolved by this post please click Solved it! so we can assist others. -
Removing the "Visited" outline after clicking on an icon that has a hyperlink
I have a Facebook Icon where the icon has a hyperlink to a facebook page. After clicking on the icon, a "Visited" dotted outline remains around the icon.
I have edited the hyperlink by selcting "no color" on each of the four icon states (I figured either the "visited" or "active" link style would remove this outline) but nothing has worked. It still leaves this outline.
How do I remove this? If I were coding, I could remove it with simple HTML/CSS.If you are referring to the dotted boundary indicated in below screen:
then that is not an active/visited state of the button, but the browser's way of notifying that the current object/link has focus (and would be triggered if you hit <enter>).
You cannot control this unless you add some custom script to throw focus off the object after click. Nothing wrong with your page's HTML/CSS.
Cheers,
Vikas -
Sticky Notes, When I click on the icon the applcition appears to be running, but I can not see it
Hmmm, Spaces complicates things, but try Window Wrangler to see if we can center it in screen or maybe resize it if the window is really somewhere...
http://mac.softpedia.com/get/System-Utilities/Window-Wrangler.shtml
How to use
· Move window: Ctrl-Alt-Arrow keys
· Resize window: Ctrl-Alt-shift-Arrow keys
· Center window: Ctrl-Alt-Home -
RAC does not start after trying to move storage
Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node Reachable?
node1 yes
node2 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node2 passed
node1 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name Status
node2 not running
node1 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name Running
node2 no
node1 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name CRS daemon CSS daemon EVM daemon
node2 no no no
node1 yes no yes
Checking CRS health...
Check: Health of CRS
Node Name CRS OK?
node1 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started -
after a firefox upgrade was auto-installed, firefox no longer will launch. clicking on the icon does nothing. can't start in safe mode
== This happened ==
Not sure how often
== firefox upgrade auto-installed ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; PPC Mac OS X 10_4_11; en) AppleWebKit/531.21.8 (KHTML, like Gecko) Version/4.0.4 Safari/531.21.10You can try to disable the Java Quick starter and the Java Console extension in the Control Panel > Java.
Control Panel > Java > Advanced tab > Miscellaneous >Java Quick Starter (disable)
You can also disable the Java plugin in Firefox: Tools > Add-ons > Plugins
See [[Troubleshooting extensions and themes]]
See [[Troubleshooting plugins]]
Maybe you are looking for
-
I got my iPod just a LITTLE wet, and it don't work?
I spilled a whole cup of tea on my purse, and my iPod was in it; the touch screen works, but only a little bit. I can only move the "swipe to unlock" button halfway, and then it stops working. Does anyone know how i can fix this? I'm clueless, and r
-
Can I switch Hard Drive Mappings for ITUNES and NOT Re-sync Apple TV?
I am running out of space on my PC with Itunes. Is there a way that I can add more hard disk space on the PC without having to RE-SYNC everything to the Apple TV, once it knows that I changed drives? What I would like to do is to add an external driv
-
Fixing text size so it doesn't mess with layout?
In IE7, if the text size is set on anything but "smallest", some things go to two lines. For example, if you go to www.earthenexposure.com , I'd like to keep everything from "sculptures" to "about" on one line. The same can be said with the navigatio
-
Number of rows returned by Rownum
Hi When i execute this code I get 8 rows where i see the rownum is getting repeated twice .Why the rownum is getting repeated and if so why only2 times ? set serveroutput on ; begin for item in select rownum as r, first_name||' '||last_name
-
When I use the Maps icon to show my location, it shows me to 3 city blocks away from my actual location. I have wi-fi and 3G enabled and have a wifi router in the next room. My 3GS is spot on! The iPhone 4 however is quite a ways off. Any ideas?