Skype number not displaying correctly with Caller ID

Hello, I have had my Skype number for several years and it's been no problem for those with Caller ID to have my Skype number displayed when receiving a call from me. However, the past few months this has changed dramatically. Now, my Skype number is NEVER displayed when calling someone and in fact, most of the time it displays numbers or even names randomly which have zero relation to myself or my number. Other times, the users Caller ID will display "Skype User". Why has this suddenly happened and what can be done to ensure that it's corrected and working properly again?
My account is indeed configured to display my Skype number (as it has been for several years), but this has no longer has any bearing whatsoever on the number displayed when I call someone. I have found that some people are no longer accepting my calls since they have no idea that I am the one calling them.
This is happening when I call numbers in the U.S. and sometimes Canada and does not matter where my physical location is - if I am in the U.S., U.K., Hong Kong, Taiwan, etc, the result is always the same - my number is NOT displayed.
If anyone could offer some advice which would take care of this, I would be most appreciative. Thank you, Greg

Yes, I have read that FAQ and I realize Caller ID does not work for all countries. But that same FAQ indicates that Caller ID is available for the U.S. And this is where I make the majority of my calls. However, as I mentioned in my original post, my Caller ID has NOT been displayed for several months. What is displayed are randomly changing phone numbers and names that have no bearing whatsoever with anything related to my actual Skype number or name. I've done my own testing when calling my home phone from Skype. I'll call multiple times in quick succession and I will get different results each and every time. The last six calls to my home from my Skype number resulted in the following results: Number displayed not related to my Skype number (different area code entirely)A completely diferent number displayed not related to my Skype number (again, different area code entirely)Name displayed which is not a name I have ever been acquainted with beforeA completely diferent number displayed not related to my Skype number (again, different area code entirely)"Skype User" displayedA completely diferent number displayed not related to my Skype number (again, different area code entirely) If Caller ID is no longer offered in the U.S. the Caller ID FAQ should be updated to reflect this change.

Similar Messages

Skype number not displaying correctly with Caller ...

Hello,
I have had my Skype number for several years and it's been no problem for those with Caller ID to have my Skype number displayed when receiving a call from me.
However, the past few months this has changed dramatically. Now, my Skype number is NEVER displayed when calling someone and in fact, most of the time it displays numbers or even names randomly which have zero relation to myself or my number. Other times, the users Caller ID will display "Skype User". Why has this suddenly happened and what can be done to ensure that it's corrected and working properly again?
My account is indeed configured to display my Skype number (as it has been for several years), but this has no longer has any bearing whatsoever on the number displayed when I call someone. I have found that some people are no longer accepting my calls since they have no idea that I am the one calling them.
This is happening when I call numbers in the U.S. and sometimes Canada and does not matter where my physical location is - if I am in the U.S., U.K., Hong Kong, Taiwan, etc, the result is always the same - my number is NOT displayed.
If anyone could offer some advice which would take care of this, I would be most appreciative.
Thank you,
Greg

Yes, I have read that FAQ and I realize Caller ID does not work for all countries. But that same FAQ indicates that Caller ID is available for the U.S. And this is where I make the majority of my calls. However, as I mentioned in my original post, my Caller ID has NOT been displayed for several months. What is displayed are randomly changing phone numbers and names that have no bearing whatsoever with anything related to my actual Skype number or name. I've done my own testing when calling my home phone from Skype. I'll call multiple times in quick succession and I will get different results each and every time. The last six calls to my home from my Skype number resulted in the following results:
Number displayed not related to my Skype number (different area code entirely)
A completely diferent number displayed not related to my Skype number (again, different area code entirely)
Name displayed which is not a name I have ever been acquainted with before
A completely diferent number displayed not related to my Skype number (again, different area code entirely)
"Skype User" displayed
A completely diferent number displayed not related to my Skype number (again, different area code entirely)
If Caller ID is no longer offered in the U.S. the Caller ID FAQ should be updated to reflect this change.

Portal application not displaying correctly with frame size 125% in IE

Dear Expert,
We are facing issue in Portal (7.0) like, when I open the application "Products Coatings" in myWorkspace with Internet Explorer
display size 100% the frame "xyz" is displayed correctly:But When I open the application "Product Coatings" in myWorkspace with Internet Explorer display size 125% the same frame is NOT displayed correctly.
Someone can help me in closing this issue..
Thanks,
kundan

Hi,
How are you opening your portal application? Is it through iViews? Where are you setting the property as 125%?
Thanks,
Mahendran B.

Phone number not displayed properly with Skype plug-in

I have a contact phone number in the text with area code etc.
When displayed by Firefox, Skype changes the number so you can launch Skype and call the number.
Very nice but it also blocks out part of the number so if the viewer did not want to use Skype, they are not able to see the number.
(See attached png)
How do i display the contact number so that Skype will not block part of the number?
My very temporary website is www.mijasbowls.org if you want to see this in action, assuming you have Firefox with the Skype extension.
As you will see, I am not a professional, just got given the job of building the club website. I am working on a proper one but this is there to keep the troops happy.
Cheers, Colin

Hi Colin
Just make the phone number a graphic.
That will mean that it isn't text, so the Skype plug-in will not parse it and recognise it as a phone number (in theory, at least, as I don't have the Skype plug-in!)
Don't forget to also put the phone number in the image's ALT attribute.
Hope that helps
Peter

TextArea text not displayed correctly with ImageSnapshot

I am having an issue with the ImageSnapshot.captureImage command capturing the text in a TextArea. Attached are two files illustrating the issue. The "screenshot.jpg" pic shows how the TextArea controls are displayed on the screen. The "created jpg.jpg" pic shows how the text is displayed in the jpg that is created. Below is the code that creates the snapshot, everything is pretty standard there as far as I can tell. The text is obviously not sized the same from one to the other. Any ideas whats going on here or what I can do to correct it?
var myencoder:JPEGEncoder = new JPEGEncoder(50);
var imgss:ImageSnapshot = ImageSnapshot.captureImage(viewstack.selectedChild, 100, myencoder);
var fs:FileStream = new FileStream();
var ssfile:File = File.applicationStorageDirectory.resolvePath("ProjectImages/snapshot.jpg");
fs.open(ssfile, FileMode.WRITE);
fs.writeBytes(imgss.data, 0, imgss.data.length);
fs.close();
Thanks,
Scott

Scott,
Can you file a bug? http://bugs.adobe.com/flex
Thanks,
Jason

New user of Firefox. Webpage I made not displaying correctly in Firefox but OK in Win IE. Why is this?

Im new to Firefox. Just found out the website Im maintaining does not display correctly with Firefox but OK with Win IE. Why is this?
== This happened ==
Every time Firefox opened

I'm going to make a prediction here:
The webpage will contain a lot of code written specifically to the non-standards compliant way IE works, and will also "not display correctly" in the following standards compliant browsers:
Chrome
Safari
Opera
and the solution will be to code the pages according to the standards meant to be followed so it displays correctly in all non-IE browsers, '''then''' see how it displays in IE.

Problems with Turkish characters not displaying correctly

A user is having problems with certain Turkish characters in particular fonts not displaying correctly (as shown below).
The two fonts (Gill Sans and Helvetica LT CondensedLight) are used for English language marketing material. Ideally, for continuity, the same font would be preferred for our Turkish language marketing material rather than changing it to a similar font.
Helvetica LT CondensedLight
Turkish character “ İ ” does not display correctly in either Word or InDesign.
Gill Sans
Turkish characters “ ş ” and “ ğ ” display correctly in Word but not InDesign.
My questions are:
1. For Gill Sans, why are the characters not displaying in InDesign but are in Word?
2. I've noticed here: http://www.webtype.com/font/gill-sans-family/#glyphs-tab that the required characters are available within the Gill Sans font. Is this because the font is newer and includes the additional characters? Would this work in InDesign?

One of the big differences between InDesign and Word is that Word will happily substitute glyphs without telling you. So, unless your installs of Word and of InDesign are using different versions of Gill Sans (which is possible, BTW) then your s-with-cedilla and your g-with-macron are actually not in Gill Sans but in some other font. I'm guessing Arial.
It's possible that you have more than one Gill Sans installed (e.g. one in your Document Fonts folder and another in your system fonts folder) that have different glyph complements. Gill Sans has been around a long time, and the version I have from the 90s has no Turkish support whatsoever.
As far as the capital-I-with-dot, you can check your glyph coverage in a variety of ways. In both InDesign and Word, you can open up a window that shows you all of the glyphs in a font. In InDesign, find it in Type -> Glyphs. In Word, it's called "Insert Symbol" and you can find it in Word 2010 by going to Insert -> Symbol -> More Symbols. I am guessing that the answer to this question is simply that your cut of Helvetica LT has no cap-I-with-dot. You'd need to pick a font that actually has support for Turkish. On WIndows, I use a very full-featured freebie called BabelMap to check font coverage. They have a Web version here:
http://www.babelstone.co.uk/Unicode/babelmap.html
but I personally prefer the downloadable .exe file.

Abstract classes and methods with dollar.decimal not displaying correctly

Hi, I'm working on a homework assignment and need a little help. I have two classes, 1 abstract class, 1 extends class and 1 program file. When I run the program file, it executes properly, but the stored values are not displaying correctly. I'm trying to get them to display in the dollar format, but it's leaving off the last 0. Can someone please offer some assistance. Here's what I did.
File 1
public abstract class Customer//Using the abstract class for the customer info
private String name;//customer name
private String acctNo;//customer account number
private int branchNumber;//The bank branch number
//The constructor accepts as arguments the name, acctNo, and branchNumber
public Customer(String n, String acct, int b)
 name = n;
 acctNo = acct;
 branchNumber = b;
//toString method
public String toString()
String str;
 str = "Name: " + name + "\nAccount Number: " + acctNo + "\nBranch Number: " + branchNumber;
 return str;
//Using the abstract method for the getCurrentBalance class
public abstract double getCurrentBalance();
}file 2
public class AccountTrans extends Customer //
 private final double
 MONTHLY_DEPOSITS = 100,
 COMPANY_MATCH = 10,
 MONTHLY_INTEREST = 1;
 private double monthlyDeposit,
 coMatch,
 monthlyInt;
 //The constructor accepts as arguments the name, acctNo, and branchNumber
 public AccountTrans(String n, String acct, int b)
 super(n, acct, b);
 //The setMonthlyDeposit accepts the value for the monthly deposit amount
 public void setMonthlyDeposit(double deposit)
 monthlyDeposit = deposit;
 //The setCompanyMatch accepts the value for the monthly company match amount
 public void setCompanyMatch(double match)
 coMatch = match;
 //The setMonthlyInterest accepts the value for the monthly interest amount
 public void setMonthlyInterest(double interest)
 monthlyInt = interest;
 //toString method
 public String toString()
 String str;
 str = super.toString() +
 "\nAccount Type: Hybrid Retirement" +
 "\nDeposits: $" + monthlyDeposit +
 "\nCompany Match: $" + coMatch +
 "\nInterest: $" + monthlyInt;
 return str;
 //Using the getter method for the customer.java fields
 public double getCurrentBalance()
 double currentBalance;
 currentBalance = (monthlyDeposit + coMatch + monthlyInt) * (2);
 return currentBalance;
}File 3
 public static void main(String[] args)
//Creates the AccountTrans object
 AccountTrans acctTrans = new AccountTrans("Jane Smith", "A123ZW", 435);
 //Created to store the values for the MonthlyDeposit,
 //CompanyMatch, MonthlyInterest
 acctTrans.setMonthlyDeposit(100);
 acctTrans.setCompanyMatch(10);
 acctTrans.setMonthlyInterest(5);
 DecimalFormat dollar = new DecimalFormat("#,##0.00");
 //This will display the customer's data
 System.out.println(acctTrans);
 //This will display the current balance times 2 since the current
 //month is February.
 System.out.println("Your current balance is $"
 + dollar.format(acctTrans.getCurrentBalance()));
 }

Get a hair cut!
h1. The Ubiquitous Newbie Tips
* DON'T SHOUT!!!
* Homework dumps will be flamed mercilessly. [Feelin' lucky, punk? Well, do ya'?|http://www.youtube.com/watch?v=1-0BVT4cqGY]
* Have a quick scan through the [Forum FAQ's|http://wikis.sun.com/display/SunForums/Forums.sun.com+FAQ].
h5. Ask a good question
* Don't forget to actually ask a question. No, The subject line doesn't count.
* Don't even talk to me until you've:
 (a) [googled it|http://www.google.com.au/] and
 (b) had a squizzy at the [Java Cheat Sheet|http://mindprod.com/jgloss/jcheat.html] and
 (c) looked it up in [Sun's Java Tutorials|http://java.sun.com/docs/books/tutorial/] and
 (d) read the relevant section of the [API Docs|http://java.sun.com/javase/6/docs/api/index-files/index-1.html] and maybe even
 (e) referred to the JLS for "advanced" questions.
* [Good questions|http://www.catb.org/~esr/faqs/smart-questions.html#intro] get better Answers. It's a fact. Trust me on this one.
 - Lots of regulars on these forums simply don't read badly written questions. It's just too frustrating.
 - FFS spare us the SMS and L33t speak! Pull your pants up, and get a hair cut!
 - Often you discover your own mistake whilst forming a "Good question".
 - Often you discover that you where trying to answer "[the wrong question|http://blog.aisleten.com/2008/11/20/youre-asking-the-wrong-question/]".
 - Many of the regulars on these forums will bend over backwards to help with a "Good question",
 especially to a nuggetty problem, because they're interested in the answer.
* Improve your chances of getting laid tonight by writing an SSCCE
 - For you normal people, That's a: Short Self-Contained Compilable (Correct) Example.
 - Short is sweet: No-one wants to wade through 5000 lines to find your syntax errors!
 - Often you discover your own mistake whilst writing an SSCCE.
 - Often you solve your own problem whilst preparing the SSCCE.
 - Solving your own problem yields a sense of accomplishment, which makes you smarter ;-)
h5. Formatting Matters
* Post your code between a pair of {code} tags
 - That is: {code} ... your code goes here ... {code}
 - This makes your code easier to read by preserving whitespace and highlighting java syntax.
 - Copy&paste your source code directly from your editor. The forum editor basically sucks.
 - The forums tabwidth is 8, as per [the java coding conventions|http://java.sun.com/docs/codeconv/].
 - Indents will go jagged if your tabwidth!=8 and you've mixed tabs and spaces.
 - Indentation is essential to following program code.
 - Long lines (say > 132 chars) should be wrapped.
* Post your error messages between a pair of {code} tags:
 - That is: {code} ... errors here ... {code}
 - OR: [pre]{noformat} ... errors here ... {noformat}[/pre]
 - To make it easier for us to find, Mark the erroneous line(s) in your source-code. For example:
 System.out.println("Your momma!); // <<<< ERROR 1
 - Note that error messages are rendered basically useless if the code has been
 modified AT ALL since the error message was produced.
 - Here's [How to read a stacktrace|http://www.0xcafefeed.com/2004/06/of-thread-dumps-and-stack-traces/].
* The forum editor has a "Preview" pane. Use it.
 - If you're new around here you'll probably find the "Rich Text" view is easier to use.
 - WARNING: Swapping from "Plain Text" view to "Rich Text" scrambles the markup!
 - To see how a posted "special effect" is done, click reply then click the quote button.
If you (the newbie) have covered these bases *you deserve, and can therefore expect, GOOD answers!*
h1. The pledge!
We the New To Java regulars do hereby pledge to refrain from flaming anybody, no matter how gumbyish the question, if the OP has demonstrably tried to cover these bases. The rest are fair game.

When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background. i am on a Windows 7

When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background.
i am on a Windows 7 professional PC, 64-bit.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
 <f:facet name="second">
 <af:panelStretchLayout id="pa1"
 binding="#{backingBeanScope.Assign.pa1}">
 <f:facet name="center">
 <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
 binding="#{backingBeanScope.Assign.r1}"/>
 </f:facet>
 </af:panelStretchLayout>
 </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

Not all chinese characters display correctly with non-embedded text

Hi all,
I've updated to the last beta 2 of Flash Player 10.1 (10,1,51,66) and compiled this simple Flex application to illustrate the fact that not all chinese characters can be displayed correctly with non-embedded text (device font).
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/halo"
 minWidth="1024" minHeight="768"
 creationComplete="resourceManager.localeChain = ['zh_CN'];"
 layout="{new VerticalLayout()}">
 <fx:Script>
 <![CDATA[
 import spark.layouts.VerticalLayout;
 ]]>
 </fx:Script>
 <s:Label text="伜-伞伟传伡伢伣伤伥伦伧伨伩伪伫伬伭-伝">
 </s:Label>
 <mx:Label text="伜-伞伟传伡伢伣伤伥伦伧伨伩伪伫伬伭-伝"/>
</s:Application>
Notice that characters from the Unicode range 0x4F1E .. 0x4А2D are not displayed within <s:Label> component that uses Flash Text Engine (FTE) by default to display the text, but at the same time those characters display just fine within older <mx:Label> component that relies on flash.text.TextField instance to render the text.

 OK, did not know that "Arial Unicode MS" font is only distributed with Microsoft Office, was looking into relying on this font in case if "simsun.ttc" font is not available at the user's system, by using the following:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx"
 minWidth="1024" minHeight="768"
 creationComplete="resourceManager.localeChain = ['zh_CN']"
 layout="{new VerticalLayout()}">
 <fx:Style>
 @namespace s "library://ns.adobe.com/flex/spark";
 @namespace mx "library://ns.adobe.com/flex/halo";
 s|Label {
 fontFamily: "Arial Unicode MS, SimSun, Arial";
 </fx:Style>
 <fx:Script>
 <![CDATA[
 import spark.layouts.VerticalLayout;
 ]]>
 </fx:Script>
 <s:Label id="sparkLabel" text="伜-伞伟传伡伢伣伤伥伦伧伨伩伪伫伬伭-伝"/>
</s:Application>
Tough decision ahead, but accordingly to the survey at codestyle.org (2000 participants from 2007 year and onwards), Arial Unicode MS is present at 62.53%% system surveyed.
ps
 My current install of Windows XP already includes the install of Microsoft Office 2007 and I've also enabled/disabled the support of East Asian languages, thus the content of my "fonts" folder differs now significantly from "clean" Windows XP install version.
Nevertheless I found the page with comprehensive lists of standard fonts installed with different releases of Windows that looks viable here: http://www.kayskreations.net/fonts/fonttb.html

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

If you think you're insane now, try maintaining those pop up menus.
As far as I know, these menus have not been updated since FW 8, so
they are at least two versions old.
Save yourself a lot of grief by avoiding those menus. There are many
other products on the market which do a much better job of creating
and maintaining this type of navigation structure.
Read this link before you climb any higher on this slippery slope:
http://apptools.com/rants/jsmenu.php
There was another blog post by the fellow who originally wrote the pop
up menu feature, but I can't seem to locate it. Even he says stay away
from them.
Not the answer you probably want, but I hope it helps, nonetheless.
Jim Babbage

With IE UIX buttons are not displayed correctly

Hello there,
We have developed an application using UIX. While browsing application using Internet Explorer I noticed that many of the buttons are not displayed correctly. Only some part of the button is displayed. Same thing happens while displaying some of the page logos and stuff. Did anyone have same problem? What's solution?
Thanks,

Hi Andy,
sometimes half of button is displayed and sometimes the whole button image is distorted. if you refresh the page, it becomes perfectly fine. sometimes nothing is displayed but if you put mouse at the place where there should be a button, you would know that there is a button...
it happens with random buttons...
i haven't seen this problem in mozilla. its quite frequent in IE.
our customer is very annoyed by this problem :(

Photoshop TIFFs with layer masks do not display correctly

I am sure other people must have this problem, but I cannot find any related posts so here goes:
I open an image using the "open in external editor" command (typically a RAW file converted to a TIFF), edit in Photoshop and save the file (as a TIFF, I do not use PSD format)
If the PS edit contains any layer masks or alpha channels (masks in the channel pallet) it does not display correctly when it reappears in Aperture. Only the top most mask will display, assuming I have multiple layer masks in the PS edit.
Not only will the TIFF only appear as the mask in Aperture, but Aperture will print or email the mask, not the PS edited file as it should appear.
It seems that Aperture only recognizes the layer mask (or alpha channel mask) as the image, and all the other layers etc are disregarded.
Is this a confirmed bug, or is there some setting I have not correctly configured or some other issue?
I love Aperture, but this problem is nearly a deal-breaker for my workflow, and would be for any serious photoshop user, I would imagine!
I cannot believe this is still a problem in version 1.5, which is the version I am using (thus my system is 10.4.8)

David,
I assume you mean in the edited PS TIFF file:
In different cases I have either:
A. A TIFF file with layer a layer mask
B. A TIFF file with multiple layer masks
C. A TIFF file with an alpha channel mask
D. A TIFF file with multiple alpha channel masks
E. A TIFF file with any combination of the above
the outcome is the same, they all do not display correctly in Aperture. It does not seem to matter if the file was opened in PS from Aperture via the open with external editor command or if it was worked on outside Aperture entirely then imported. I do have maximize compatibility in PS checked (though I understand this is only for PSD files, though perhaps I am wrong here)
any thoughts?

Report does not display correctly when exported to adobe

Post Author: mgisonda
CA Forum: Crystal Reports
Hopefully someone can help me. I am currently running Crystal Reports profession version 10. I have applied service pack 1 and recently service pack 6. I am having a problem with the display of a report within adobe. My report is a bit complex. It is a 8.5x11 one page landscape report. It is set up in a grid format with multiple lines and boxes drawn on it. Here is the report information: Report Definition----
Number of Database Fields: 144 Number of On-Demand Formulas: 40 UFLs in use: None Page N of M Used: No File Format Schema: 10.2.0 I created the report using CR developer. I use the report within a web project. The user requests the report and it returns to the user, an adobe file of the report. However, this is where I am having trouble. On my local development machine, the report displays fine. In CR developer, the report displays fine. When I export the report to Adobe from the CR Developer, it exports fine. BUT when I run the report from my web site, the adobe file that is returned is broken up over 42 pages. What seems to be actually happening is the return adobe file seems to think that the page size is 2in X 4in.. Where it got that, I don't know.The server running IIS is a windows server 2003. It has adobe 8.0 reader on it. I also have Crystal 10 Server Distribution loaded on it. And I have loaded CR10 Service pack 6 on that as well. Below is the web code that is used to display the report:Imports CrystalDecisions.Shared'Imports CrystalDecisions.CrystalReportsImports CrystalDecisions.CrystalReports.EngineImports CrystalDecisions.CrystalReports.Engine.ReportClassPublic Class PrintInspectionLayout Inherits System.Web.UI.Page Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim mNotInSpringDesign As String Dim mPartType As String mNotInSpringDesign = Request.QueryString("NotInSpringDesign") If mNotInSpringDesign = "TRUE" Then mStockCode = Request.QueryString("StockCode") lblNotInSpringDesign.Text = "Stock Code #: " & mStockCode & " does not exist in Spring Design." lblNotInSpringDesign.Visible = True Response.Write(" <center><a href='SpringDesignWildCardSearch.aspx'>Go To Search Page</a></center>") Else mStockCode = Request.QueryString("StockCode") Dim pList As ParameterValues = New ParameterValues Dim paramName, paramValue As String Dim pV As ParameterDiscreteValue = New ParameterDiscreteValue Dim Report As ReportDocument= New ReportDocument Dim expOpts As ExportOptions = New ExportOptions Dim pdfRtfWordFormatOpts As PdfRtfWordFormatOptions = expOpts.CreatePdfRtfWordFormatOptions Dim expFormatOpts As ExportFormatOptions = expOpts.ExportFormatOptions expOpts.ExportFormatType = ExportFormatType.PortableDocFormat mPartType = Request.QueryString("PartType") 'SELECT THE INSPECTION LAYOUT TYPE TO PRINT Select Case mPartType Case Is = "C" Report.Load(MapPath("./Reports/CompressionLayout.rpt")) 'Report.Load(MapPath("./Reports/PCAR.rpt")) Case Is = "E" Report.Load(MapPath("./Reports/ExtensionLayout.rpt")) Case Is = "T" Report.Load(MapPath("./Reports/TorsionLayout.rpt")) Case Is = "W" Report.Load(MapPath("./Reports/WasherLayout.rpt")) Case Is = "F" Report.Load(MapPath("./Reports/FreeFormLayout.rpt")) Case Else End Select pV.Value = mStockCode pList.Add(pV) Report.DataDefinition.ParameterFields("StockCode").ApplyCurrentValues(pList) Response.ClearContent() Response.ClearHeaders() Response.ContentType = "Application/pdf" Report.ExportToHttpResponse(expOpts, Response, False, "") Report.Close() End If End Sub Any ideas as to the solution? Why is it not displaying correctly? I have spent two days researching every FAQ to try to find an answer, but to no avail. Please any help would be greatly appreciated. ThanksMike

Hi Paul
You're more likely to get an answer to this if you post in the UNIX forum.
By the looks of it, you may have a problem with your fonts.

Skype number not displaying correctly with Caller ID

Similar Messages

Maybe you are looking for