Skype on E72 while on GSM of UTMS is power hungry

I have been using Skype on my E72 last 1 month and have noticed that it consumes about 200mA of current while running in the background with no communication in progress using GSM or UTMS. It consumes much lesser current when using WLAN. However Fring consumes very little curent in both GSM/UTMS and WLAN mode. Skype has to check on this and improve the power consumption issue.

Skype is a power hungry protocol. It's a P2P application essentially which is going to be fairly processor and/or network intensive.
If they'd used the open standard SIP protocol, there wouldn't be problems like this, and they'd be integrated fully into most mobile devices with no hassle and would work efficiently. But they went with their own proprietary protocol . Skype really needs dedicated hardware to work best.
As for Fring. Are you using it for Skype calls? Still Fring is probably just more optimised for the S60 platform, but still I'd bet for Skype calls it drains more power than a SIP call would via the native support.
E72-1 UK CV 052.005

Similar Messages

Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source? Now that I'm on iOS 7, I either charge or use... Not both.

Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source? Now that I'm on iOS 7, I either charge or use... Not both.

No problems here.
Edit...
My IOS-7 is on an iPod Touch.

IMac powered off while in use and won't power up, surge protected

iMac DV suddenly lost power while in use and will not power up. I've played with the power cord and reset button etc. but it's as thopugh it died of old age. Any ideas? Could it's internal battery cause this ? Where is it?
Is there a way that I can download from the hard drive without power?

Before you trash the Imac, I would get a new internal battery and try that and if that doesn't work I would try to get a new power supply, that sounds like the problem.
Also if you have another mac you can take the hard drive out of the dead Imac and put it into the other mac and get your important files off of it. HTH,Aaron

Error message when trying to install Skype on E72-...

Trying to Re-install Skype on my Nokia E72-1. After doing a Hardware reset
It disappeared from my Apps.
Now get the following message on Nokia Suite when I try to install it via PC using Nokia Suite.
"Could not install this file"
"There was a problem with installing Skype on your device.
Please make sure that the date and time settings are correct
on your device and that there's enough free memory.

bbao wrote:
Nokia should issue a new certificate for this popular app.
Accenture's remit for continuing support for Symbian is probably quite restricted, as such issues starting to affect S60 3rd Ed. FP1 and FP2 devices increasingly now!
Happy to have helped forum in a small way with a Support Ratio = 37.0

SKYPE TO GO WHILE IN MEXICO

Hi,
I have employees that travel to mexico a lot, while in mexico can they use skyp to go to call back home?

At the moment they can't, though we are working hard to provide Skype To Go numbers in Mexico and should get these soon.

Time stamp wrong in skype and thunderbird while menu bar has correct time

I noticed in my applications like Skype, MSN Messenger, Thunderbird email that the time stamp was wrong. But the Menu Bar clock and the system preferences Date and Time were correct. My exact error is that the app timestamp always showed the time as PM.
I googled for answers and several topics mentioned a locked / misplaced / corrupted localtime file.
However, The real reason is that I had a custom time format under Languages and Text system preference. For some reason the custom format showed morning as PM and evening as PM. I opened the preference, selected time, and changed it from Custom to USA.
There are several similar errors (always showing 20 before time, ie 20:43, always is 7 oclock, ie 7:32, or etc) that were mentioned in other tickets I read.
I followed this post to go into languages and Text to correct the custom time format; http://discussions.apple.com/message.jspa?messageID=11503087 (see last post. IGNORE the part about plist!)

Mail displays the date & time according to your System Preferences > International > Formats settings. The specific format used (i.e. Short, Long, etc.) may depend on the column width. It looks like there is something wrong with your Dates > Customize or Times > Customize settings there...
> I've tried expanding the date column width in Mail, and changing to US
(instead of International) Date / Time format in my system preferences
Not sure what you mean. I don’t see an “International” option anywhere other than the name of the International preferences panel itself...

Error while opening central admin link after power pivot uninstall sp 2010?

Error while any link opened in the cental admin
example:http://server:port/_admin/WebApplicationList.aspx
Required permissions cannot be acquired.
ULS log when Config wizard ran
An exception of type System.IO.FileNotFoundException was thrown. Additional exception information: Could not load file or assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
or one of its dependencies. The system cannot find the file specified.
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
   at System.RuntimeTypeHandle._GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, Boolean loadTypeFromPartialName)
   at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
   at System.RuntimeType.PrivateGetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
   at System.Type.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase)
   at Microsoft.SharePoint.PostSetupConfiguration.ReflectionHelper.InvokeConstructor(String assemblyQualifiedName, Type[] constructorSignature, Object[] constructorParameters)
   at Microsoft.SharePoint.PostSetupConfiguration.TaskCommon.ReflectionHelperInvokeConstructor(String assemblyQualifiedName, Type[] constructorSignature, Object[] constructorParameters, TaskBase task)
the error same as the below article:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/7a06ebc8-ad8f-4b76-bc44-a8171fde6816/absolutely-sick-of-powerpivot-the-product-stinks-failed-to-find-assembly?forum=sqlkjpowerpointforsharepoint
but any of the sollution did not work.
Thanks
Ravi
Ravi

I have uninstalled power pivot now the central adminlinks are working.
but when i run configuration wizard it pups with error:
Could not load file or assembly 'Microsoft.AnalysisServices.SharePoint.Integration'
Can i delete follwoing key in the registery?
The follwoing article asked to remove the key:
http://social.technet.microsoft.com/Forums/en-US/487f18d4-32cf-4056-a6de-433f69bb7470/configuration-wizard-failed-to-find-assembly
my registry entry
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\ServiceProxies\Microsoft.AnalysisServices.Sharepoint.Integration.EngineServiceProxy]
"AssemblyQualifiedName"="Microsoft.AnalysisServices.Sharepoint.Integration.EngineServiceProxy, Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
"ServiceProxyName"="MSOLAP$POWERPIVOT"
Ravi

Error encountered while doing on-demand refresh of Power BI report

When I try to manually refresh a PowerBI excel that has been uploaded on to SharePoint, I get this error.
"OnPremise error: Sorry, you don't have permissions to retrieve data for this data connection. Request access from your Power BI admin. An error occurred while processing table 'Reference Data'. The current operation was cancelled because another
operation in the transaction failed. "
It has been verified to us that the data management gateway has been approved and we have made sure that the credentials and the database details to connect to the On-Prem instance are the same as specified.
THe correlation ID is 8eb7c217-f62d-4137-a648-5df57937058e

the error is talking about the permissions to the data source, in the PBI admin center, per data source you need to specify who (O365 user) can access it, maybe this is the source of your problem?
GALROY

Macbook randomly shuts down while in use. still has batter power.

About six weeks ago I posted this same problem. It seemed to go away on its own but now has happened again (once today and once just two days ago). I couldn't find any thread that had the same problem as mine.
I have a Macbook that I bought in January, 2007 and I've had very few problems with it. Starting last early spring, after a little over a year, the battery started taking less time to run out. It also occasionally took a longer time to come out of sleep mode, usually only a few extra seconds but a few times it took nearly a minute, and once it was nearly ten minutes). I know I need to replace it, but overall, it isn't drastic. It just runs out maybe 25% faster than it used to (and hasn't really increased since), and rarely has problems with coming out of sleep mode.
Three times now my computer has randomly shut down for no reason while I was doing things. Once in August and twice in the last couple of days. It isn't related to a particular program, as I was never always using the same thing. The last two times (today and the other day. And I think the first time, too, though I can't remember), I had my computer unplugged and it had been being used for some time unplugged (once it was around 50%, once around 40%, when it shut off). When I try to turn it back on, it just shuts off again and only stays on when I plug it in again.
I am UP TO DATE on all programs. Is this a common symptom of a battery dying? I'm wondering if maybe the gauge that tells me my battery power is screwed up somehow and isn't giving me accurate numbers (though when this happens, the lights on the bottom still appear as if to say I have battery power left).
Basically I'm wondering if this is a simple battery problem I can solve by buying a new one or if there is a more serious problem with my computer. IS THIS NORMAL? Please help. I love my Macbook.

Mine does that. Around 40-45% battery life it just dies.

Photosmart C4180 All-in-One. While printing it stopped and the power button is orange. Nothing works

Hi, I have a Photosmart C4180 All-in-One. So far it worked perfectly.
Tonight I had to print a few pages and right in the middle of it, it stopped leaving the page halfway.
Also the on/off button stays orange and there is an exclamation point underneath it.
I removed the page and turned off the power by removing the plug (pressing the on/off button didn't work).
While putting the plug back in, the power came on again... but the on/off button remains orange. Nothing works.
Does anybody recognize this problem and/or does anybody have a solution for this?
Thank you,
Dutchfox

Hi , I understand that you are having issues printing and scanning. I would be happy to help you.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.HP Photosmart (D110), Photosmart Wireless (B110), and Photosmart Ink Advantage (K510) e-All-in-One Printer Series - Printing a Network Configuration Page. Check to see if you still have a valid IPv4 address. If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer.
Type the IPv4 address into your web browser's address bar. (Safari)Did it load the web page? If you were able to access the printer's Embedded Web Server, please try the following steps: Repair the Disk Permissions on the Mac:Close all applications.On the Apple menu bar, click Go, click Applications and then click Utilities.Double-click Disk Utility.Highlight your hard drive/partition on the left.Click Verify and then Repair Disk Permissions. Restart the computer.. Reset the Printing System: Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol. Click the Apple icon and then click System Preferences.Click Printers & Scanners.Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.Click OK to confirm the reset.Type the correct Name and Password.Click OK to reset the printing system.Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button. If you appreciate my efforts, please click the 'Thumbs up' button below. If there is anything else I can help you with, just let me know. Thank You.

Older MacBook Pro put away while on holidays now won't power or wake up.

Hi all, my MBair is working just fine (luckily I haven't had any of the problems noted here) but we left for holidays with my MBair and I put my MBP away asleep, but probably ought to have powered off, for 10 days and now I can't wake it or power it on. I've tried taking the battery out and tried working from direct power, all to no avail. No sure what v I am on but it's as up-date as possible as I think it's a 2009. Any suggestions? I dimly remember this happening once before. Thanks!

Thanks Paul. Yahoo, problem solved thanks to my local Apple store. Apparently the power cord I was using at home was only 60watt as compared to the 85watt cord I was using at work so there was not enough 'juice' to keep the battery charging for the few days when I brought it home and of course was not enough to power my 'pro' to work. I've since switched power cords and Voila´ it is up and running!
Message was edited by: karen887

How to capture photo of screen while in skype

how to capture photo of screen while in skype on Ipad2

press the home button and the top power button at the same time. your screen will flash white and the image will be in your camera roll.

I cant view my contact's full profile on skype app...

Hello!
I believe a contact has blocked/deleted me cuz he stopped getting online. I can still see his profile and all info on laptop but when i installed skype on my android phone, i cant see his full name(which is available on laptop) but only the skype id. Furthermore, when i tapped to see his profile, only this info was available:- gender: not specified, language: english (even though his native language is something else and i can still see that on laptop) and skype id. While on the pc, i can see the same old info:- full name, birth date, age, gender, language, no. of contacts, plus his profile picture.
So, I want to know that since this guy used to get online and we chatted on my pc, is that why i can still see his profile on my laptop? is there a possibility that he has blocked or deleted me thats why i cant see his profile on my phone, on which i installed the skype app AFTER he stopped getting online?

Hi Carlyy.xx,
Are you trying to access those PDF files that you've stored on Acrobat.com from within the Reader mobile app?
Best,
Sara

Skype popping up on top of full screen games.

I am having an issue with Skype and hoping to get a solution. I've read several posts here but they were all, while similar, different from the issue I seem to be having.
Any time I'm playing Smite or World of Warcraft (or any game when I'm in fullscreen) and on a call on Skype.. the chat window for that skype call will randomly appear on top of my game I'm playing fullscreen in. In essence causing me to lose control of my character for a few seconds until I can click back into the correct window to put it back on top.
It happens when I'm on a call (we use skype to communicate while we play games) but nothing seems to prompt it. No one new was added to the call, no one typed in the chat. No one new came online, etc.
I've tried setting myself to DND, I've tried turning off all notifications. I tried setting the priority for skype lower than the game I'm playing in Task Manager. I don't know what else to do.
This doesn't happen to any of the people who are on the same call and in the same game as me when it happens.
Anyone have any ideas?

I made some changes (navto://), but yesterday my folio completely disappeared in Content Viewer (iPad) and can't get it back. I need to fix this first and will let you know if my buttons are working.
Edit: figured out why my folio disappeared. By accident I gave two articles the same name. No error message but it made the folio disappear completely.

Exception EOlesysERROR in module Skype.exe @ 00129...

Skype ran with no problems prior to the latest update. Computer is Dell Latitude laptop running Win 7 Ultimate SP 1 64-bit.
First Install
1. Logged in to local admin account.
2. Disabled malwarebytes realtime protection.
3. Got a fresh download from Skype site for Save and Run.
4. Got Exception EOlesysERROR in module Skype.exe @ 00129D71.
5. Visited Skype site and reviewed Skype Community.
6. I tried to get the 6.14.0.14.msi download per the Community, but the link had been disabled.
7. Retried install in Safe mode with No Networking . Got Exception EOlesysERROR in module Skype.exe @ 00129D69.
Second Install
1. Restarted the laptop and logged into local admin account.
2. Uninstalled Skype 6.21 and Skype Click to Call.
3. Ran TweakNow Power Pack 2011 to clean registry and tracking items.
4. Got a fresh download from Skype site for Save and Run.
5. Got Exception EOlesysERROR in module Skype.exe @ 00129D71.
6. Changed permissions on Skype icon and Skype.exe to give “everyone” full control.
7. Skype would not run.
Third Install
1. Uninstalled Skype 6.21 and Skype Click to Call.
2. Found an earlier version 6.18 of Skype in the C:\users\localadmin\downloads folder.
3. Ran SkypeSetup.msi for version6.18. After completing some of the install, got Access Denied error.
4. Uninstalled Skype 6.18.
5. Ran TweakNow Power Pack 2011 to clean registry and tracking items.
6. First Search: Deleted all Skype Folders by using the Windows Search utility while logged into local admin
account. It found about 40 items.
7. Second Search: Ran the Windows Search utility again and found 8 items.
8. Ran TweakNow Power Pack 2011 to clean registry of Skype items. Ran it again to clean tracking items for Skype.
9. Retarted the laptop.
10. Third Search: Ran the Windows Search utility again and it was clean.
11. Logged in as the standard user.
12. Fourth Search: Ran the Windows Search utility again and it found 7 Skype items.
13. Ran TweakNow Power Pack 2011 to clean registry of Skype items. It found some Skype items for the standard user.
Ran it again to clean tracking items for Skype.
14. Logged out of standard user and logged in as local admin.
15. Ran dxdiag.exe per reference in the Community. No problems were found in either in 32- and 64-bit modes.
16. Could not delete the Skype Icon in the Recycle bin as it was being held by $R03LAFF.exe.
Fourth Install
1. Logged in to local admin account.
2. Got Skype 6.21.32 from CNET’s download.com and Saved to download folder.
3. Disabled Wi Fi connection, antivirus and malwarebytes.
8. Ran Skype Setup. Got Exception EOlesysERROR in module Skype.exe @ 00129D69. Also got Access Denied when trying to
run the executable.
4. Admitted defeat to myself and to the standard user of the laptop.

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Skype on E72 while on GSM of UTMS is power hungry

Similar Messages

Maybe you are looking for