Skype reports called number is invalid

When I try to dial a telephone number , Skype comes back with the message "Invalid phone number."  I know is a vlaid telephone number, I have dialed it on my cell phone and it works and it is a published company telephone number.  The curious part is that the first time I dialed this number with Skype it went through without a problem.  Does anyone know how to solve this problem?
Solved!
Go to Solution.

Well, folks, I solved this problem myself, by accident. I added the number to my contacts and the problem went away. Still the same number, but dialed through contacts and now it works fine.

Similar Messages

  • Skype local calling number for new plymouth new ze...

    hi can i please get a local skype number for new plymouth new zealand i brought a hastings one as it was 06 area code but its a toll call for me to call it

    cdogg wrote:
    hi can i please get a local skype number for new plymouth new zealand i brought a hastings one as it was 06 area code but its a toll call for me to call it
    Hello
    If your preferred location is not listed it means that Skype Numbers aren't available there.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Calling report from FORM - error Invalid value of paramente 'P_YEAR'

    Hi guys,
    Could you please help me to figure out what is going wrong
    with my form which run a report?
    I am using Developer suite 10g.
    when i run report from report application it run fine,
    but when i call that report from a form it gives me error.
    I have checked the datatype, checked the parameter value
    that I assign from form is available in the report parameter value.
    What else do i have to check in order to run this report
    from the form.
    Error Message from Report Queue Manager:
    Invalid value for parameter 'P_YEAR'.
    Your insight will be appreciated.

    Thank you for reply Denis,
    Here is the code which run_report from form.
    DECLARE
    -- variables for running individual reports
    report_filename               VARCHAR2(40);
    var_reportpath               VARCHAR2(100);
    report_otherparms      VARCHAR2(200);
    -- variables to keep track of successful reports in silent mode
    rep_status                         VARCHAR2(40);
    rep_req                                   NUMBER := 0;
    rep_count                              NUMBER := 0;
    dummy                                        NUMBER;
    -- variables to load the report names and checkboxes into the parameter list
    pl_id                                        PARAMLIST;
    plname                                   VARCHAR2(20) := 'rpt_list';
    -- variables to loop through the parameter list and run the reports
    i                                                  NUMBER;
    split_loc                              NUMBER;
         param_value                         VARCHAR2(40);
         checkbox_name                    VARCHAR2(40);
         report_basename               VARCHAR2(40);
         svc_name                              VARCHAR2(4);
         run_report                         BOOLEAN;
         disp_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'DISP',
                        :reports_control.year_list, :reports_control.quarter_list,
                        :reports_control.group_list );
    hosp_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'HOSPICE',
                        :reports_control.year_list, :reports_control.quarter_list,
                        :reports_control.group_list );
    orth_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'O/P',
                        :reports_control.year_list, :reports_control.quarter_list,
                        :reports_control.group_list );
    BEGIN
    -- Are any reports selected?
    IF BOXES_ARE_CHECKED(:System.Cursor_Block,'PRINT_NULL_REPORT') THEN
    if not CHECKBOX_CHECKED('print_null_report') then
    disp_exist := TRUE;
    orth_exist := TRUE;
    hosp_exist := TRUE;
    end if;
    -- Create Report Parameter Listing
    pl_id := GET_PARAMETER_LIST(plname);
    if NOT ID_NULL(pl_id) then
         DESTROY_PARAMETER_LIST(pl_id);
    end if;
    pl_id := CREATE_PARAMETER_LIST(plname);
    if ID_NULL(pl_id) then
         GENERIC_ALERT('Error creating report listing');
         RAISE Form_Trigger_Failure;
    end if;
    ADD_PARAMETER(pl_id,'id1', TEXT_PARAMETER,'cover_page_intro!INTRO');
    ADD_PARAMETER(pl_id,'id2', TEXT_PARAMETER,'utilization_profile!ALLUTIL');
    ADD_PARAMETER(pl_id,'id3', TEXT_PARAMETER,'utilization_summary!ALL_SUMMARY');
    ADD_PARAMETER(pl_id,'id4', TEXT_PARAMETER,'hiv_profile!HIV_PROFILE');
    ADD_PARAMETER(pl_id,'id5', TEXT_PARAMETER,'wound_care_profile!WOUND_CARE_PROF');
    ADD_PARAMETER(pl_id,'id6', TEXT_PARAMETER,'top_10_diagnosis!TOP10DIAG');
    ADD_PARAMETER(pl_id,'id7', TEXT_PARAMETER,'diagnosis_profile!DIAG_PROFILE');
    ADD_PARAMETER(pl_id,'id8', TEXT_PARAMETER,'physician_profile!PHYS_PROFILE');
    ADD_PARAMETER(pl_id,'id9', TEXT_PARAMETER,'physician_specialty!PHYS_SPECIALTY');
    ADD_PARAMETER(pl_id,'id10',TEXT_PARAMETER,'discharge_profile!DISCHARGE_PROFILE');
    ADD_PARAMETER(pl_id,'id11',TEXT_PARAMETER,'acute_care_discharge!ACUTE_DSCHRG');
    ADD_PARAMETER(pl_id,'id12',TEXT_PARAMETER,'excessive_cost_patients!EXCESSIVE_COST');
    ADD_PARAMETER(pl_id,'id13',TEXT_PARAMETER,'provider_profile!PROV_PROFILE');
    ADD_PARAMETER(pl_id,'id14',TEXT_PARAMETER,'service_profile!SERVICE_PROFILE');
    ADD_PARAMETER(pl_id,'id15',TEXT_PARAMETER,'age_gender_profile!AGE_GENDER_PROF');
    ADD_PARAMETER(pl_id,'id16',TEXT_PARAMETER,'network_services!NETWORK_SERVICES');
    ADD_PARAMETER(pl_id,'id17',TEXT_PARAMETER,'thh_section_header!THH_COVER');
    ADD_PARAMETER(pl_id,'id18',TEXT_PARAMETER,'thh_utilization!THH_UTILIZATION');
    ADD_PARAMETER(pl_id,'id19',TEXT_PARAMETER,'thh_service_profile!THH_SVC_PROF');
    ADD_PARAMETER(pl_id,'id20',TEXT_PARAMETER,'hit_section_header!HIT_COVER');
    ADD_PARAMETER(pl_id,'id21',TEXT_PARAMETER,'hit_utilization!HIT_UTILIZATION');
    ADD_PARAMETER(pl_id,'id22',TEXT_PARAMETER,'hit_service_profile!HIT_SVC_PROF');
    ADD_PARAMETER(pl_id,'id23',TEXT_PARAMETER,'hme_section_header!HME_COVER');
    ADD_PARAMETER(pl_id,'id24',TEXT_PARAMETER,'hme_utilization!HME_UTILIZATION');
    ADD_PARAMETER(pl_id,'id25',TEXT_PARAMETER,'hme_service_profile!HME_SVC_PROF');
    ADD_PARAMETER(pl_id,'id26',TEXT_PARAMETER,'disp_section_header!DISP_COVER');
    ADD_PARAMETER(pl_id,'id27',TEXT_PARAMETER,'disp_utilization!DISP_UTILIZATION');
    ADD_PARAMETER(pl_id,'id28',TEXT_PARAMETER,'disp_service_profile!DISP_SVC_PROF');
    ADD_PARAMETER(pl_id,'id29',TEXT_PARAMETER,'hosp_section_header!HOSP_COVER');
    ADD_PARAMETER(pl_id,'id30',TEXT_PARAMETER,'hosp_utilization!HOSP_UTILIZATION');
    ADD_PARAMETER(pl_id,'id31',TEXT_PARAMETER,'hosp_service_profile!HOSP_SVC_PROF');
    ADD_PARAMETER(pl_id,'id32',TEXT_PARAMETER,'orth_section_header!ORTH_COVER');
    ADD_PARAMETER(pl_id,'id33',TEXT_PARAMETER,'orth_utilization!ORTH_UTILIZATION');
    ADD_PARAMETER(pl_id,'id34',TEXT_PARAMETER,'orth_service_profile!ORTH_SVC_PROF');
    ADD_PARAMETER(pl_id,'id35',TEXT_PARAMETER,'encounter_detail!ENCOUNTER_DETAIL');
    --- set up other parameters to send to generate_report
    if :reports_control.output_choices = 'FILE' then
    var_reportpath := :global.report_directory || :reports_control.year_list;
    if :global.filename_suffix <> '_A10G' then
         var_reportpath := var_reportpath || 'q' || :reports_control.quarter_list;
    end if;
    var_reportpath := var_reportpath || '_G' || :reports_control.group_list || '_';
    else
         var_reportpath := '';
    end if;
    report_otherparms := 'p_year='||:reports_control.year_list;
    if :global.filename_suffix <> '_A10G' then
         report_otherparms := report_otherparms || '     p_quarter='||:reports_control.quarter_list;
    end if;
    report_otherparms := report_otherparms || ' P_REPORTGROUPID='||:reports_control.group_list;
    --- Check if reports are checked and submit to Reports Server
         for i in 1..35 loop
              GET_PARAMETER_ATTR(pl_id,'id'||i,dummy,param_value);
              split_loc := instr(param_value,'!');
              checkbox_name := substr(param_value,1,split_loc-1);
              report_basename := substr(param_value,split_loc+1,length(param_value));
    if CHECKBOX_CHECKED(checkbox_name) then
         run_report := TRUE;
         svc_name := substr(report_basename,1,4);
         if svc_name = 'DISP' then
              if not disp_exist then
                   run_report := FALSE;
              end if;
         elsif svc_name = 'ORTH' then
              if not orth_exist then
                   run_report := FALSE;
              end if;
         elsif svc_name = 'HOSP' then
              if not hosp_exist then
                   run_report := FALSE;
              end if;
         end if;
         if run_report then
              report_filename := :global.filename_prefix || report_basename || '_10G';---- :global.filename_prefix || report_basename || :global.filename_suffix;
         GENERIC_ALERT(report_filename || ' ' || report_otherparms);
              rep_status := GENERATE_REPORT(report_filename,:reports_control.output_choices,var_reportpath,report_otherparms);
              rep_req := rep_req + 1;
              if rep_status = 'FINISHED' then
                   rep_count := rep_count + 1;
              end if;
         end if;
         end if;
         end loop;
    -- if we're in silent mode, display a completion message
         if :reports_control.output_choices = 'FILE' and CHECKBOX_CHECKED('chk_silent') then
              SET_ALERT_PROPERTY('REPORT_CREATED',alert_message_text,
         '' || rep_count || ' of ' || rep_req || ' reports created successfully');     
              dummy := SHOW_ALERT('REPORT_CREATED');
    end if;
    ELSE
    dummy := SHOW_ALERT('select_report');
    END IF;
    END;

  • Suddenly can't make calls to my skype to go number...

    I have been using my android to call my skype to go numbers for a few months now. On occasions I cannot make calls but after a few trys it goes through. But I have been trying today and there has been no luck. Any solutions? I still have minutes left in my subscription and I have sufficient skype credits in my account. Thanks in advance. 

    CP1020 wrote:
    HI,
      I have a skype-to-go number. And though I can receive calls on it, I can't make any calls with it, which was the whole point of getting it in the firs place.  Does anybody know how to resolve this and what could be causing it. 
      Few changes that happened recently, that maybe affect this
    - staying at hotel, so got 'public network' checked for the internet.
    - moved to Abu dhabi
     Any help appreciated.
    Thank you
    If you are trying to call telephones, you still need to have Skype Credit on your account or pay for a subscription.  Calls to telephones from Skype are not free, even if you have a Skype To Go number. 
    Skype To Go is an alternative for making calls when you are not able to use the Skype program or app to log into your computer.  By itself, you do not gain any privileges for calling telephones.  That's where the Skype Credit or a subscription come into play, covering those charges.
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • Can't Receive Calls to my Skype To Go Number

    We recently purchased a year long unlimited calling plan AND a skype to go number.
    Unfortunately, no one can call my number. Sometimes they receive a busy signal, other times it just beeps once and hangs up.
    Can you tell me why this is happening and how can we fix it so that I can receive calls to my to go number???

    If you mean "Online Number" please do the following:
    First check your privacy settings are set to ''Allow calls from anyone''.Then change them to "Allow SkypeIn calls from Only people from my Contacts List".Save and wait for 5 minutes.Log out from your Skype account and log back in. Change settings back to "Allow calls from Anyone". Save and wait for 5 minutes.Log out from your Skype account and log back in.
    About Me You can also use a IP Camera as your camera for Skype video Example Instructions

  • If I call my Skype-To-Go number (using my Skype re...

    If I call my Skype-To-Go number (using my Skype registered CELL phone) to call a LANDLINE phone in Japan, WHY will I be charged the JAPAN MOBILE rate of $0.18/minute INSTEAD OF the JAPAN LANDLINE rate of $0.03/minute (+ VAT + connection fee)?
    Solved!
    Go to Solution.

    Hello,
    I need your STG # please.
    (VAT is not charged on call rates in any location).
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Call Skype contact using skype to go number

    is it possible to call a skype contact using a skype to go number? if yes, what is the procedure to add a skype contact for a skype to go number?
    Thanks,
    Tariq

    tariqbk wrote:
    is it possible to call a skype contact using a skype to go number? 
    Sorry it's not.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Conference call using Skype to go number

    I set up two Skype to go numbers to India. When it try to conference these numbers it says "Sorry we just had a Technical Problem". Can't we make conference call using Skype to go number?

    shalltoji wrote:
    Should I call it through the country code or plain?
    Hello,
    You must always prefix your dial string with the international country access code (+1 for USA, +44 for UK etc.).
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Called Number in IVR reports

    Hello,
    I have installed an IVR and cretead a script with a call redirect step. Is there a way to have in the detailed call by call report to have the redirected number in the Called Number filed of the report?
    Best Regards,
    Nelu Cirstea

    Hi
    else if instr(vtemp, ".") > 0 then
    tonumber (left(TrimLeft (vtemp),4))
    else
    and tonumber (left(TrimLeft(vtemp),2))
    The and keyword seems to be misplaced.
    Regards,
    Stratos

  • The phone number is invalid. Please check...- PC S...

    Hi,
    I subscribed to unlimited united states plan and I tried to call this number: 1-877-211-4887 it is dodge parts service... I would like to call them from Slovenia, but it doesn't go through in step 2 where it says: The phone number is invalid. Please check that you have entered it correctly.
    Over PC and skype number is correct... But I would really like to call from my mobile phone...
    Where is the problem?
    Thank you!

    I've tested this # by calling it from within the United States and the call goes through normally.
    Some US companies which provide a toll free # only accept calls which originate from within the US.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Can I set up a Skype to go number for myself?

    Can I set up a Skype To Go number in Canada for myself and then give it to friends, family, clients etc. to call me? I just learned Skype doesn't have any Canadian numbers. I'm a Skype video conference subscriber. I probably wouldn't have signed with Skype if I knew they didn't service Canada properly.

    Danberesford wrote:
    1. Can I set up a Skype To Go number in Canada for myself and then give it to friends, family, clients etc. to call me?
    2. I probably wouldn't have signed with Skype if I knew they didn't service Canada properly.
    Hello,
    1. Yes this is possible in a limited way. You would need to register each of your family/friends/clients' phones in your Skype To Go program. Only those who are registered could dial your Canadian STG number and have it ring on your Skype or on your phone. You wouldn't be able to give out the number at random because STG will ask for verification if a non-registered phone calls the number.
    2. Unfortunately the Online # program can't be introduced in Canada until the Canadian telco authorities issue the necessary licenses.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Skype-To-Go number in different location

    Dear Skype enthusiasts and friends,
    I thought somebody could help me on the following:
    I have a UK mobile registered with my UK Skype-To-Go, and can call this Skype-To-Go number and it says: "Hello and welcome to Skype. To dial one of your speed dial contacts press 1. To make any other international call press 2", and like that I can make world-wide phone calls for little number. (On top of that, if I register speed dial contacts I also get a UK landline number for these, which is very handy).
    I am now in the USA for a few months, and managed to change the location for Skype-To-Go to "nearest location" and have registered my US cell phone. My speed dial contacts have been updated to US numbers (instead of the UK landline numbers). I also get a text message from Skype which includes US numbers for my speed dial contacts in Europe, etc, and this is very handy and it works.
    Now, my question is, I cannot find anywhere a US number which I call which then says "Hello and welcome to Skype. To dial one of your speed dial contacts press 1. To dial another international number press 2."
    This is very important to me, as I can use option 2 and type in any number I like and it puts me throught. because I cannot find the above number, this means I need to continiously change my speed dial contacts (maximum 8 or 10 are allowed).
    Any suggestions or solutions?
    Thank you very much.
    Niki
    Niki Lanik
    Skype: niki.lanik
    Email: xxxxxxxxxxxx
    facebook.com/nikilanikracing

    THREAD CLOSED
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • How can I change my Skype-to-Go Number?

    Hi Dear all,
    Can somebody tell me, how can i change my own skype to go number? Someone block me, and i would like to try call her with different dumber.
    Thank you
    This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content. A link to this post appears where the post was originally added.

    Hello to both.
    Currently 9 is the maximum but investigations are ongoing to establish if this can be increased.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Trois-Rivieres Skype to Go Number is not local

    Hello,
    When i call the Trois-Rivieres Skype To Go Number (819) 303-0308 in Trois-Rivieres, Canada, it's not considered as a local number, and it is located in Gatineau on my cellphone bill. Why ?
    Thanks

    Unfortunately we're not yet able to provide local SkypeToGo #s in all locations. 
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Local skype to go number is long distance

    I have a contact skype to go number which is long dsitance as well as my access number for all other calls is a long distance number. How do i get a different skype to go number for a contact as the rest of my contacts are local skype to go numbers

    Hello,
    Please advise your access number and your other direct dial numbers. Thank you.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Maybe you are looking for

  • Problems with itunes and ipod

    If anyone can help me with this problem i would really appreciate it The problem started about a week ago when i had just finished downloading some music off of morpheus. My computer displayed a message saying that I didn't have anymore space on my i

  • Flex 2, FDS 2.5 and CF 8: Still can't execute any kind of WebService!!!

    Hi everyone, I am starting to retract my brain from an intense 2 days to figure out how to use Flex with Coldfusion. I am using Coldfusion 8 Beta (this part is good, don't need help for CF itself). I am also using Flex Builder 2 (with chart but this

  • How do i copy and paste photo files

    I have only recently become an iMac user and can't find a way to copy and paste photos which in turn is giving me lots more folders than I want. Is there a 'dummies' way of learning? Thanks

  • MII Migration tool for server installed in Linux

    I am planning to migrate few files from xMII 11.5 to 12.0.  I searched in market place to download the migration tool(service.sap.com -> SAP Support Portal -> Downloads -> SAP Installations & Upgrades -> Search for Installations and Upgrades. Entered

  • Ultra ATA 7200 RPM vs SATA 5400 RPM

    Which would have the edge in speed?