Skype reports insufficient processor power to work in video mode

Skype reports insufficient processor power to work in video mode
I am running Windows 7 latest revision and have loaded the full set of the latest drivers into my S10-3. When I run a fresh install of Skype (latest full release or the Beta), I get a message comes up saying that Skype is unable to run a video session or is unable to run at any reasonable quality in video mode. The pop-up says to quit all other applications, but there are none running. Skype help suggests trying the Beta version if on the latest release or reinstalling the latest release if on the Beta version. I have tried this. The S10-3 must be capable of running Skype or why bother putting a camera in the machine. Anyone got any ideas please?
Regards
Partsboy

Hi,
your S10-3 should be able to work with skype,, my formerly S10e with N270 (equipped with 2GB mem )works well with Skype 
installed memory is 1GB or 2GB ?
...and here you can get  oldversion 
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Similar Messages

  • Mini power supply works with Video iPod?

    Will the power supply that came with my iPod Mini work with the new 80GB Video iPod, which didn't come with a power supply? The adapters are the same but I don't want to fry the video iPod.
    Thanks,
    Brett

    Yes, it will work just fine.

  • Labview Executable Becomes Unresponsive, Windows reports Insufficient Resources when trying to perform explorer tasks

    I have a test program that is utilizing the NI-9481 relay modules to switch power to a part and switch a Keithley 2000 DMM  to measure the voltage. This test needs to power on and off the part 3000x for 4 minutes on and 4 minutes off. I implemented this design using a state machine design pattern. The timing is done in one minute increments using the "Get Time/Date in seconds" function available with Labview 8.2. Each minute a measurement is taken and the data is writen to a text file. 
       -Measurements Algorithm:
          -Prior to anything, instrument is initialized with a reset, enters state machine loop 
          -Measurment Function, configures DC Volts and trigger, (relays switch), send trigger and read from instrument when SRQ is asserted
       -Switching Algorithm:
          -DAQmx Create task w/Auto cleanup(T)
          -DAQmx Create channel - Digital Output
          -Property Node for Channel - DO.Invert Lines = False
          -DAQmx Generate Digital 1D Data
          -DAQmx Write Data w/ Auto start(T)
    I have been working out the bugs with the devices we are communicating with and they appear to be working normally, however for the second time(yesterday was a DAQmx error) at cycle 131(17ish hours into the test) the program has become unresponsive and windows will not open the task manager and windows explorer reports "Insufficient system resources" when attempting to open a window. Labview is not reporting an error...
    Currently I suspect the while loop that is controlling the timing and am placing a WaitTillNextmsMultiple function in the loop set to 500.
    Also I wonder if the DAQmx sequence is consuming memory and eventually consumes all system resources. 
    If anyone has any ideas or knows of a problem with the devices I am using please help. Thanks
    -Nate
    Solved!
    Go to Solution.

    N8D11 wrote:
    I have a test program that is utilizing the NI-9481 relay modules to switch power to a part and switch a Keithley 2000 DMM  to measure the voltage. This test needs to power on and off the part 3000x for 4 minutes on and 4 minutes off. I implemented this design using a state machine design pattern. The timing is done in one minute increments using the "Get Time/Date in seconds" function available with Labview 8.2. Each minute a measurement is taken and the data is writen to a text file. 
       -Measurements Algorithm:
          -Prior to anything, instrument is initialized with a reset, enters state machine loop 
          -Measurment Function, configures DC Volts and trigger, (relays switch), send trigger and read from instrument when SRQ is asserted
       -Switching Algorithm:
          -DAQmx Create task w/Auto cleanup(T)
          -DAQmx Create channel - Digital Output
          -Property Node for Channel - DO.Invert Lines = False
          -DAQmx Generate Digital 1D Data
          -DAQmx Write Data w/ Auto start(T)
    I have been working out the bugs with the devices we are communicating with and they appear to be working normally, however for the second time(yesterday was a DAQmx error) at cycle 131(17ish hours into the test) the program has become unresponsive and windows will not open the task manager and windows explorer reports "Insufficient system resources" when attempting to open a window. Labview is not reporting an error...
    Currently I suspect the while loop that is controlling the timing and am placing a WaitTillNextmsMultiple function in the loop set to 500.
    Also I wonder if the DAQmx sequence is consuming memory and eventually consumes all system resources. 
    If anyone has any ideas or knows of a problem with the devices I am using please help. Thanks
    If the bolded stuff is happening repeatedly... you have answered your own question.
    LV will not destroy resources until it exits as part of its clean-up routine.
    Create tasks and allocate resource once when you start and re-use them until you are done, then detroy them.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Can't save power pivot report back to power pivot gallery...file is read only

    Hi eb
    I have developed an excel pivot report in a power pivot gallery (all in 2013).
    Next time i open that report from the power pivot gallery and attempt to save it again to the gallery
    I am blocked with a msg: we cant save http://........./powerpivot gallery/myPwerPvt.xslx  file is read only.
    To keep your changes you'll need to save the woorkbook with a new name or different location.
    Please help!
    TIA
    Rea

    Hi Rea,
    When you try to edit the PowerPivot workbook, are you open it as read-only mode? Please see the screenshot below:
    The "Read Only" mode will not be able to save any changes to the workbook you are loading.
    In addition, is it work for you while you save the PowerPivot workbook with a new name?
    Regards,
    Elvis Long
    TechNet Community Support

  • I'm looking at the dell Inspiron Desktop 4th Generation Intel Core i5 Processor for photoshop work versus the Dell XPS 8700 i7 IS IT WORTH SPENDING THE EXTRA $400?

    I'm looking at the dell Inspiron Desktop 4th Generation Intel® Core™ i5 Processor for photoshop work versus the Dell XPS 8700 i7 IS IT WORTH SPENDING THE EXTRA $400? my old desktop is a AMD about 5 years old so there will be a huge change in speed to what I am use to
    Here are the specks on both:
    Inspiron
    Processor
    4th Generation Intel® Core™ i5-4460 Processor (6M Cache, up to 3.40 GHz)
    Operating System
    Help Me Choose
    Windows® 8.1 (64Bit) English
    Memory2
    8GB Dual Channel DDR3 1600MHz (4GBx2)
    Hard Drive
    1TB 7200 rpm SATA 6Gb/s Hard Drive
    Video Card
    NVIDIA® GeForce® 705 1GB DDR3
    Ports
    Front
    (2) USB 2.0, MCR 8:1, Mic and Headphone Jacks
    Rear
    Four USB 2.0 connectors , Two USB 3.0 connectors, HDMI, VGA, RJ-45 (10/100/1000 Ethernet), 3-stack audio jacks supporting 5.1 surround sound
    Media Card Reader
    Integrated 8-in-1 Media Card Reader
    (supports Secure Digital (SD), Hi Speed SD (SDXC), Hi Capacity SD (SDHC), Memory Stick (MS), Memory Stick PRO (MS PRO), Multimedia Card (MMC), Multimedia Card Plus (MMC Plus), xD-Picture Card(XD))
    Memory Slots
    2 DIMM Slots
    Chassis
    Bluetooth
    BT 4.0 via 1705 WLAN card
    Chipset
    Intel® H81 PCH
    Power
    300 Watt Power Supply
    XPS 8700
    Processor
    4th Generation Intel® Core™ i7-4790 processor (8M Cache, up to 4.0 GHz)
    Operating System
    Help Me Choose
    Windows 8.1 (64Bit) English
    Choose Options  
    Memory2
    12GB Dual Channel DDR3 1600MHz (4GBx2 + 2GBx2)
    Hard Drive
    1TB 7200 RPM SATA Hard Drive 6.0 Gb/s
    Video Card
    NVIDIA GeForce GTX 745 4GB DDR3
    CPU Thermal
    86W
    Graphics Thermal
    225W/150W/75W
    Power
    460W, optional 80 PLUS Bronze, 85% efficient, supply available on ENERGY STAR configurations
    Ports
    Bays
    Support for 4 HDD bays: including (3) 3.5” HDDs
    –Capable of 1 SSD and 3 HDD configuration
    Media Card Reader
    19-in-1 Card Reader (CF Type I, CF Type II, Micro drive, mini SD, MMC, MMC mobile, MMC plus, MS, MS Pro, MS Pro Duo, MS Duo, MS Pro-HG, RS-MMC, SD, SDHC Class 2, SDHC Class 4, SDHC Class 6, SM, xD)
    Slots
    Memory Slots
    4 DIMM

    From my personal experience, I wouldn't go for an Integrated card. This is one of the most important components for Photoshop, so invest in a decent graphics card (ATI or NVidia). It doesn't have to be a really exepensive one - I have been using ATI Radeon with 256MB of RAM on my Dell Studio for almost two years and it still rocks! (even when I work with 3D in Ps CS5 Extended).
    I would also invest in more RAM (this can be added easily - I bought extra 4GB as my Studio came with 3GB).
    I wouldn't worry about the processor - I'm on Intel Core 2 Duo - and it works very very well, it's very quick which is very important as I'm training Photoshop.
    I hope this helps.

  • 2960X 15.02(EX5) %AAA-3-ACCT_LOW_MEM_UID_FAIL:AAA unable to create UID for incoming calls due to insufficient processor memory.

    Deployed four 2960X switches in a stack.  All okay for about one month then tried to web browse for the first time via firefox which partially displayed the page.  I assumed this was a browser error.  So tried Chrome then IE which both failed.  Chrome was a bad display and IE fails to connect.
    After this, I could not telnet or ssh.  Plugged into the console and immediately started receiving:
    %AAA-3-ACCT_LOW_MEM_UID_FAIL: AAA unable to create UID for incoming calls due to insufficient processor memory
    %% Low on memory; try again later
    I am unable to log in.  I have a TAC case logged but the first step to try is a reboot which will be difficult until I can get a maintenance window.  When I do get a maintenance window, I would also like to deploy a fix such as a different version of code or a work-around cofig command.  I don't mind disabling HTTP.
    Any suggestions?

    I am currently working with TAC
    The switches failed about 18 hours later and had to be rebooted to get back up.  Now that I have console/telnet access, I can see the memory being depleted mostly by the Auth Manager process at about the same rate as free memory is dropping.
    SW13#sho proc mem sort | i Auth Manager
     191   0  177721332   95004616   34757416          0          0 Auth Manager
    SW13#sho proc mem sort | i Auth Manager
     191   0  177754888   95025696   34759780          0          0 Auth Manager
    SW13#sho proc mem sort | i Auth Manager
     191   0  177774316   95037928   34761056          0          0 Auth Manager
    SW13#sho proc mem sort | i Auth Manager
     191   0  177799720   95053940   34762888          0          0 Auth Manager
    SW13#sho proc mem sort | i Auth Manager
     191   0  177824976   95069732   34764696          0          0 Auth Manager
    SW13#
    SW13#
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103448576 Free:  339348260
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103454416 Free:  339342420
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103455860 Free:  339340976
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103459236 Free:  339337600
    SW13#sho proc mem sort | i Processor
    Processor Pool Total:  442796836 Used:  103461040 Free:  339335796

  • CRIO application works in interactive mode but broken VIs reported in error log when run built application on target

    I have been getting more than my fair share of grey hairs the past few days because of this. Over the past few months this almost never happened. Lately, after a seemingly minor change to some serial communications code, hardly a single build works without throwing errors like this:
    #OSVers: 6.3
    #OSBuild: Jun 6 2014, 09:14:16
    #AppName: /c/ni-rt/system/lvrt.out
    #Version: 14.0
    #AppKind: AppLib
    #AppModDate:
    InitExecSystem() call to GetCurrProcessNumProcessors() reports: 1 processors
    InitExecSystem() call to GetNumProcessors() reports: 1 processors
    InitExecSystem() will use: 1 processors
    starting LabVIEW Execution System 306708506 Thread 0 , capacity: 1 at [3507679466.00933790, (19:24:26.009337710 2015:02:24)]
    starting LabVIEW Execution System 306708507 Thread 0 , capacity: 1 at [3507679470.59560204, (19:24:30.595601929 2015:02:24)]
    starting LabVIEW Execution System 2 Thread 0 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
    starting LabVIEW Execution System 2 Thread 1 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
    starting LabVIEW Execution System 2 Thread 2 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
    starting LabVIEW Execution System 2 Thread 3 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
    Thread consumption suspected: 3 Try starting 4 threads
    starting LabVIEW Execution System 2 Thread 4 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
    starting LabVIEW Execution System 2 Thread 5 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
    starting LabVIEW Execution System 2 Thread 6 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
    starting LabVIEW Execution System 2 Thread 7 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
    Thread consumption suspected: 8 Try starting 1 threads
    starting LabVIEW Execution System 2 Thread 8 , capacity: 24 at [3507679515.73854351, (19:25:15.738543576 2015:02:24)]
    and 
    #Date: TUE, FEB 24, 2015 04:47:22 PM
    #OSName: VxWorks
    #OSVers: 6.3
    #OSBuild: Jun 6 2014, 09:14:16
    #AppName: /c/ni-rt/system/lvrt.out
    #Version: 14.0
    #AppKind: AppLib
    #AppModDate:
    InitExecSystem() call to GetCurrProcessNumProcessors() reports: 1 processors
    InitExecSystem() call to GetNumProcessors() reports: 1 processors
    InitExecSystem() will use: 1 processors
    starting LabVIEW Execution System 306708506 Thread 0 , capacity: 1 at [3507670087.84041262, (16:48:07.840412710 2015:02:24)]
    starting LabVIEW Execution System 306708507 Thread 0 , capacity: 1 at [3507670092.45153570, (16:48:12.451535843 2015:02:24)]
    starting LabVIEW Execution System 2 Thread 0 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
    starting LabVIEW Execution System 2 Thread 1 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
    starting LabVIEW Execution System 2 Thread 2 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
    starting LabVIEW Execution System 2 Thread 3 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
    VI_BROKEN (0): [VI "NC serial comms protocol.lvlibet Lower Temperature Limit.vi" (0x04667310)]
    VirtualInstrument:etOrClearBadVILibrary - now VI is bad on [VI "NC serial comms protocol.lvlibet Lower Temperature Limit.vi" (0x04667310)]
    this->flags=33563136, compilerError=6
    VI_BROKEN (0): [VI "Heater Control HAL.lvclass:Write Heater Control Active.vi" (0x058c4e98)]
    VirtualInstrument:etOrClearBadVILibrary - now VI is bad on [VI "Heater Control HAL.lvclass:Write Heater Control Active.vi" (0x058c4e98)]
    this->flags=50340352, compilerError=6
    VI_BROKEN (0): [VI "NI_LVConfig.lvlibave Config File.vi" (0x047b7e90)]
    VirtualInstrument:etOrClearBadVILibrary - now VI is bad on [VI "NI_LVConfig.lvlibave Config File.vi" (0x047b7e90)]
    this->flags=33563136, compilerError=6
    and so on.
    This is using a cRIO 9074 running CompactRIO recommended software set  14.0.1 .
    These errors happen right at startup. Memory use is steady in interactive mode, about 20 MB contiguous memory is unallocated out of 128 MB. I have taken pains to prevent allocation and follow cRIO besta practices non concatenated strings array building in loops etc). CPU is 50-60% when running interactive mode.
    Really at my whit's end here, I have tried the various combination of enabling / disabling debugging in the RTEXE, disconnecting typedefs etc. I have not noticed a pattern. 
    Regards,
    MarkCG

    Hello MarkCG,
    What minor changes did you make to the serial communication code? Posting the VI or a screenshot of the VI with the modifications which caused the RTEXE to stop functioning could be useful to troubleshoot the issue. 
    Regards,
    J_Bou

  • More processor-power?

    Hi everyone!
    I'm in need of assistance. I'm currently working on a major production, an album. I'm using Logic Pro 7.1 on a PowerBook G4 with 1.5 GHz and 1.5 DDR ram.
    The project is lagging and I have a lot of restrictions, a lot of things that I can't do in my projects, due to lagging and the program going down, when I press play.
    I'm thinking of buying a desktop computer.
    Do I need more processor-power (more GHz) or more ram or what do I need to speed up the processing of channelstrips and audio-recs?
    Best Regards
    Anders Bach Pedersen, Denmark
    http://www.myspace.com/epicentremusic
    PowerBook G4   Mac OS X (10.4.7)   Using Logic Pro

    hi anders,
    yes, you need more of everything.
    more cpu - think MacPro
    more ram - think bank loan (re: Mac Pro)
    more speed with more HDDs - wider bus and more revs/minute.
    it's an investment in your career, after all.

  • Linksys Wireless Card (Linksys Router) in G4 Power Mac works fine until...

    Linksys Wireless Card (Linksys Router) in G4 Power Mac works fine until...
    new software upgrades on the 14 August 2006 (yesterday) which includes Airport 4.2.
    The Linksys wireless PCI card (WMP54G) was installed just under a year ago with no problems. There was no need to install drivers, the Apple Mac recognised it and used it as a wireless card. I was browsing the internet last night (14 August) and the software updates downloaded in the background. Once it finished downloading, it requested for a re-start. I carried on browing the internet and then switched off my machine and went to bed.
    When I turned on my computer in the morning, the wireless card no longer activates. The computer recognises there is a card but there is no connection to the router (meaning no internet). The router settings have not changed at all.
    I believe it could be the Airport 4.2 update has interfered with the Linksys Card, but I'm not sure. I've been through all the Assist functions etc and there is no luck. It does seem that the big update released on the 14th August has played its part.
    Any opinions and assistance on getting the card back to normal, and if possible assistance in removing the new updates to previous drivers/settings.
    Thanks people.
    G4 Power Mac Dual Processor Mirrored Doors   Mac OS X (10.3.9)  

    Sorry, I do not have a solution for you but I have the same problem upgrading from Jaguar to Panther (on my home machine not listed which is a G3 b&w). Now my WMP54G doesn't see any wireless network (I used to be able to see several in the 'hood), and Apple Profiler recognizes the card. Apple updater changed the Airport system files, I believe.
    Is it possible to find the old Airport software and install over current system to get it working again? I doubt Apple still offers the old airport software, but if someone has it, maybe it can be installed with Pacifist.
    We need some wireless help here, community.
    2.5 GHz Dual PowerMac G5 | 3GB RAM | SuperDrive   Mac OS X (10.4.6)  

  • Will this power supply work with my PC?

    Will this power supply work with my PC?  I have a Compaq Presario SR5816F
    http://www.newegg.com/Product/Product.aspx?Item=9SIA4CP1GF8726&cm_re=power_supplies_500w-_-9SIA4CP1G...   
    http://www.amazon.com/Solid-Gear-Series-ATX12V-SDGR-500BX/dp/B00FF7VEJE
    This question was solved.
    View Solution.

    JCGood1984, welcome to the forum.
    The computer should take a standard ATX power supply unit (PSU).  I suggest measuring the existing PSU and compare the measurements to the one in the links.  If the measurements are the same, it should fit.  I don't know anything about the brand, however.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Windows reporting incorrect processor speed

    I have an A31p (2653-R9U) with XP Pro SP3 loaded.  I've loaded many different OS's on this box since I've had it and have noticed that Windows reports the processor under "System Properties" as:
    Mobile Intel(R) Pentium(R)
    4 - M CPU 2.00GHZ
    1.2 GHz  1.5 GB of RAM
    My question is.....is the 1.2 GHz the processor being used or the amount of cycles available?  I've seen it at 2.00 GHz and as low as 788 MHz.  
    Really curious???????????????

    Your Pentium processor has a feature called SpeedStep that allows "the clock speed  of the processor to be dynamically changed by software. This allows the processor to meet the instantaneous performance needs of the operation being performed, while minimizing power draw and heat dissipation."
    Cheers... Dorian Hausman
    X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

  • Report generation toolkit does not work

    Hello,
    The report generation toolkit does not work.
    It seems to point to the 'Generate Report Data Members.ctl'.
    I suppose it has something to do with the wrong set of active X-controls ?
    I work with Win 2000 and Office XP
    How can i solve this problem ?
    Thanks in advance !
    Regards
    Christine

    Hello Julien,
    Sorry for the late answer
    I become a broken arrow, when openening the example Sample Report (Excel).vi
    Searching further for the cause of the error it brings me to the sub vi tables.
    Print screens in attachment
    Regards
    Christine
    Attachments:
    error Ni Reports.doc ‏67 KB

  • 12002 The Reporting Web Service is not working.

    Hi :)
    I have WSUS on Windows Server 2012 std. with Internal Database. Today I've installed 7 updates from patch tuesday and after restart I've got
    error 12002 The Reporting Web Service is not working
    I can see now that updatet clients can not report their status anymore :(
    What's up ? Any suggestion ?
    Best regards
    Nenad

    Hi,
    I would start by verifying that the /ReportingWebService resource is properly configured in IIS.
    Correct configurations can be found in the WSUS Technical Reference Guide: IIS
    Settings for WSUS 3.0 SP2 Web Services.
    Also,Under ReportingWebService
    Made sure all were set to disabled except for Anonymous Authentication
    Anonymous Authentication Enabled
    ASP .NET Impersonation Disabled
    Basic Authentication Disabled
    Forms Authentication Disabled
    Windows Authentication Disabled
    Regards,
    Clarence
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • The report generation toolkit didn't work after the vi was build to an application.exe

    I write a VI using LabVIEW Report Generation Toolkit , it really works in the LabVIEW7.1 and 6.0 enviroment. but after the VI was build in to an application.exe, the LabVIEW Report Generation Toolkit didn't work even the application runs.
    thanks for your help.

    You might want to follow the procedure here:
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/86256a47004e16d186256a84004cb883?OpenDocument
    (If the URL doesn't work, you can search for NI document ID: 2B87TVI8)
    Dan

  • I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard. After a few weeks the HDD failed. New Leopard install reports: "insufficient memory". I need Tiger install disks so I can install

    I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard.
    After a few weeks the HDD failed. I bought a new disk, installed it and trued to install Leopard, but the  install fails reporting "insufficient memory".
    I assume the installation requires more memory than the OS actually needs to be able to run.
    I need Tiger install CD/DVD so I can install Tiger first and then upgrade to Leopard.

    Call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
    The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
    You need much more RAM than that.
    Leopard system requirements:
    http://support.apple.com/kb/SP517

Maybe you are looking for

  • Is there any possible of manual focus or apps for ...

    Reason I need this is because the autofocus doesn't deilver the best focus setting I really need to get, the correct focus in time or will have some problem focusing something that is tinny. I have to try very hard to touch on tinny object in the scr

  • Camera Raw Sluggish in CS5 vs CS4

    My computer is Windows Vista Home Premium, 64-bit.  Quad Core Q6600, 2.4 GHz, 6gb RAM. When running Photoshop CS4 with Bridge and Camera Raw, I could change any of the settings, and the preview would update pretty much instantaneously, with no lag. I

  • The PDF file you selected is currently not supported

    error message.  received PDF file, able to sign it, but not to fill in blanks.  When I open it under my adobe account, the error message is, "the PDF file you selected is currently not supported"

  • Fade to Slideshow ?

    Wen I use Tiger's built in slideshow feature, I get an odd transition. My desktop fades to black as expected, but then reappears as if interrupted, and then starts the show. Any ideas why? Any insights what I could do to fix this?

  • Someone knows how to change the font of a JTextField ?

    I tried almost everything, but I still can't change the Font of a JTextField... Thanks anyway...