Skype shuts down when loading on Panasonic TV

Skype on Panasonic TV problems Installed Logitech TV Cam V-U0022 to my Panasonic TC-P50VT25 according to manufactures recommendations and instructions. Worked great for five days as I would Skype with my son 2000 miles away. Unfortunately, now when Skype attempts to load and gets to the main Skpye screen it shuts down and returns to the VieraCast homescreen. All other Apps work fine. Called Logitech and with my laptop computer they cleared the camera as not part of the problem but suggested it was a Panasonic firmware issue. Called Panasonic tech, they never heard of the problem and resolved to turn it over to their "firmware tech people". I don't know if I will ever hear back from them! I see on Skypes' Support Network that this problem has happened to others. Any suggestions to help with this problem?

I am having same problem with same TV.

Similar Messages

  • Why does my Safari shut down when loading a page?

    Why does my Safari shut down when I'm trying to load a page?

    Is this for a Mac? You posted in the Beta for Windows section, you might want to try the Beta for Mac pages instead and see if anyone there know a good fix. Is this just with Adobe's PDF reader, or with Preview too? A workaround could simply be switching to a different reader, if you simply cannot find what causes the crashes. A clean reinstall might do the trick, if you haven't done so already.
    If this is on Windows than I would recommend downloading the PDF plugin from http://www.apple.com/safari/download/plugins.html
    Message was edited by:  Andy

  • Mail shuts down when loading incoming messages

    Hello!
    well, actually the title says it all. Since yesterday mail shuts itself down when it tries to load incoming messages.
    The strange thing is: when I deactivate WLAN (and LAN) mail operates just fine. I can answer mails and when I switch on the internet access again it even sends the written emails. However as soon as it tries to load incoming messages it shuts down again. The loading bar loads till the end and then the Mb/s rate decreases till it reaches 0 Kb/s and then Mail shuts down.
    What I have tried:
    - restarted my Mac
    - running the disk fixing program (I have no idea if that's the correct name for it in English since I operate my system in German) - btw it found nothing
    - starting my Mac with pressed Shift
    - deleting the com.apple.mail.plist (this didn't help at all)
    - using a com.apple.mail.plist from my TM backup
    I have absolutely no idea what else I could do. Does anyone have a clue?
    Waht did I do to start this bug?
    Nothing. That's the problem. I left my Mac running for a few hours while I was away and when I came back and wanted to look at my mails it shut down for the first time. I can't remember installing any updates before.
    I have four mail server accounts in my mail. The strange thing is that just now a mail from Yahoo was able to arrive ...
    I would be so glad if anyone could help me sort out this issue. I so desperatly need my mail program.
    If you have any further questions don't hesitate to ask. I'll try to provide you with any information I can give you that could be of help.
    Thank you for your time.

    I have no idea what solved the problem but mail works just fine right now.
    So I guess it was either the internet connection (which I still doubt as I was able to send messages) or it was the server of my mail provider.

  • ITunes Shuts Down when Loading Videos

    I have a 120 gig iPod Classic, and just recently I started having problems with it. Now whenever I try to load a movie from iTunes to my iPod, iTunes shuts down right when the video is almost done loading onto my iPod. I have no problems with music, or even when I load videos from another computer. Does anyone know how to fix this?

    Are you trying to sync them from the photos tab?
    If so, try importing the videos into itunes and then syncing them from the movies tab.
    You'll also want to uncheck 'Sync Videos' in the photos tab.

  • Itunes shuts down when loading music to ipod Touch

    I just bought a new PC running Windows 7. Everything is set up correctly in iTunes. When I first synced the iPod Touch it loaded about a third of my music before I got an error message saying iTunes had stopped working and needed to shut down. Now, as soon as it tries to load the music, iTunes stops working again and I have to shut it down. It's always at the point where iTunes attempts to load the music (not at the start of the sync process).

    I've solved it. I was using a 3rd party USB cable, which wasn't playing nicely with the iPod. As soon as I used the proper cable it worked perfectly. Apologies to Apple and shame on you Logic3 for making crappy cables!

  • Imac shuts down when loading new music or new software

    My Imac shuts down (intermittently) when loading music or software. Logic board was replaced I believe because fire wire connection was intermittently not working (1st year).
    Hard drive was replaced recently (Dec 2010). Now SuperDrive and Cable (Optical Data, Flexible) was JUST replaced. But when I was on my third CD loading it shut down 3 times.
    Has anyone had this problem and know of a solution?
    Works fine otherwise
    Apple Store has run software on it and everything seems to pass.
    It seems to shut down less when firewire is disconnected (back up hard drive LaCie) but still occasionally shuts down.

    I have plugged my computer in three different places over the years and have had the same problem. I have also brought the power cord with computer for work and I am assuming they would have picked that up when they run their tests on the computer.
    Could it be the keyboard (never brought in) or WiFi connection (don't think they would plug in anything)? A combination of this with load software/music?
    Thing is the computer works perfectly otherwise. It is only does this when loading software or music from a cd/dvd.

  • PC shutting down when loading a game

    I went to play Farcry tonight and everything was well untill I went to load my last save spot. After the loading bar was full a blue screen came up saying..
    A problem has been detected and windows has shut down. Run a system diagnostic utility supplied by your hardware manufacturer. In particular, run a memory check and check for faulty or mismatched memory. Try changing video adapters.
    There was more but someone must have had this happen to them
    I don't know what to do, memory seems fine, I even ran 3D Mark05s demo.
    I have the following memory..
    http://www.newegg.com/app/ViewProdu...-004&depa=1

    Could be a number of things............
    Software bugg ( game software or vga driver )
    To low on 12v ( PSU ) to handle 6800 vga card and 3,0 cpu
    to low voltage on memory ( you should at least be around 2.7v)
    faulty memory ( run memtest86 )
    to high CPU -/ VGA temp ( check with speedfan or other software )

  • Computer shuts down when loading OS

    when i switch on the lapto the POSt loads but the time it starts loading the OS it shutdown.What is the solution to this?

    thews wrote:
    when i switch on the lapto the POSt loads but the time it starts loading the OS it shutdown.What is the solution to this?
    Sounds like a couple different problems.
    1. Corrupted O/S
    2. System overheating from vents being blocked.
    3. Bad GPU aka video card failure
    If 3 that requires board replacement
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • I use a. Vintage iPad and am having difficulty with the iPad shutting down when trying to load pages from a variety of programs..Facebook, cnn, various newspapers, etc

    IPad shuts down when I open Facebook, articles on CNN, newspaper articles, various videos.  Many thanks

    Hi The apps, are now needing, more power from ipad that why you have problems If you can a good buy, is the iPad Air 1 was £479.00 now £359.00 For 32G Cheers Brian

  • Skype 6.18 keeps shutting down when I do anything!

    Whenever I do anyhing, Skype shuts down. CLick a contact, shuts down. Try to send a message shuts down! my main problem is I use Skype for work!
    Please help, in the Event Viewer I get this
    Faulting application name: Skype.exe, version: 6.18.60.106, time stamp: 0x53d154b0
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005

    sonor8 wrote:
    Hello!
    Problems started last week and I have removed old Skype, re-installed new one and also even deleted Explorer from computer but still have problems with my work cpu (Vindows 7 Professional). Skype just shuts down.
    Error message: Access violation at address 54D84778 in module ieframe.dll
    Try to uninstall Windows KB2977629 update (Cumulative security update for Internet Explorer: September 9, 2014).
    See also this similar case:
    http://community.skype.com/t5/Windows-desktop-client/Skype-crashes-after-latest-auto-update/td-p/363...

  • Computer shuts down when I click on the list or grid display button

    I've uninstalled an reinstalled 3 times and instead of the computer shutting down when I start itunes as it was doing, it only does it when I click on the display as a list, grid or cover display button. However it seems to unistall some parts at the same time as I can't open it all afterwards (error message says its not installed). This started to occur after a couple of weeks of non use and when I last used it I purchased songs from itunes. I now have current version but didn't when it first statred to happen. Help!!

    Okay ... we'd better have a closer look at the minidumps the PC has been producing to see if they can turn up any additional information on what we're dealling with here.
    Open "My Computer", and see if you can find a directory called C:\Windows\Minidump. (That's where minidumps usually go on a PC, so long as the Systemroot hasn't been set to some other folder.)
    If it's been collecting minidumps, there should be files in there with names like "Mini(number-numbers).dmp"
    (If you have "Hide filename extensions for known file types" enabled in Windows, the ".dmp" extension may not appear on the dump files. The numbers in the file name will be different for each minidump, if minidumps are present.)
    Once we've tracked down some minidumps, we can have a go at analysing them.
    1. Download and install the Windows debugging tools from here:
    http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
    2. Go to Start, All Programs, Debugging Tools For Windows, Windbg
    Once you open Windbg, you will presented with a blank screen.
    3. Click on "File > Symbol File Path". Here you will enter the symbols
    path. Symbols are needed to effectively debug.
    The path will be:
    SRVc:symbolshttp://msdl.microsoft.com/download/symbols
    4. Enter in this path and click OK. Now, go to "File > Save Workspace"
    so that your symbols path is saved for future use.
    5. Go to "File > Open Crash Dump" and load the file.
    (An "Open Crash Dump" screen will appear ... doubleclick "My Computer", doubleclick "Local Disk", doubleclick "Windows", doubleclick "Minidump", and doubleclick on one of the minidumps in there.)
    You will/should get a message to save base workspace information. Choose no.
    Now you will get a debugging screen. It takes a little bit to run it,
    as the symbols have to be downloaded as they are needed.
    After the "bugcheck analysis" part of the screen comes up, look for the component that seems to be causing the crash. (It'll say "Probably caused by" ...)
    Let us know the precise name of the component. (Include any file name extensions like .dll or .sys.)
    If you can, have a look at several of your crash dumps. Are all the crashes being caused by the same component? If not, could you let us know the names of the various components being cited in the various crash dumps?

  • The new version of firefox does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.

    Firefox automatically loaded a new version recently. The new version does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.

    See "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * https://support.mozilla.com/kb/Firefox+hangs

  • Skype shutting down, and then impossible to restar...

    So i was just watching some youtube, when i uddenly heard my skype shutting down. When i tried to restart it, it didn't recocnice my password. I changed my password and i got an I/O error (whatever that is), i then tried to uninstall skype and reinstall and now i can't download it without getting a code 1603 error. any idead as to how i fix this?

    Try to re-install Skype using this msi-installer for the currently latest 6.21.0.104 version:
    http://download.skype.com/msi/SkypeSetup_6.21.0.104.msi
    Make note of any error message received when installing Skype.

  • Aperture shuts down when uploading photos to Facebook

    Aperture shuts down when uploading photos to Facebook.
    only loads part of the Album?

    This is discussed extensively in the thread at:
    https://discussions.apple.com/message/21603962#21603962
    What exact version of OSX and Aperture are you using?
    Ernie

  • Shuts down when unplugged & moved/lifted/pressure applied

    This is really weird for me. Just got my macbook a couple of months ago, refurbeished, first generation. Love it. Suddenly, the battery started giving me problems, and the machine would shut down when id unplug the magsafe usually. Sometimes it would stay on for a moment, until I tried to pick it up, open or closed, and it then shuts right down.
    I read up on here, did all the software updates and stuff with no results, and took it into Apple. They checked it out, determined bad battery, and gave me a "fresh" one on the spot. Seemed to work fine at the store, they had me take it home. Dandy!
    I get home and start charging it up. Seems alright. Next day , on "full charge" I go to take the machine to another room, and after a few seconds walking with it, shuts down. So frustrating. This seems to happen when ti computer is given very slight movement, and allllways when I try to pick it up from the bottom, applying pressure on the bottom of the case and or battery. This however, does not happen when the computer is running off of AC power, i can shake it and wobble it with no problems.
    Aside from this, the "new battery" from apple seems quirky. Battery "health" in iStat shows only 86% while my original battery had 100% health even after 2 months use. Also, the machine has been intermittently not recognizing the battery, showing an X'd battery in the menubar, and then showing things like it will take 1423 hours to charge or i'll have 1456 hrs to use battery power, just a lot of quirky stuff that I never saw with my other battery.
    I'm just getting concerned that this is potentially a problem with the machine itself, not the batteries. The only thing swaying me away from that thought is that i have no problem using the machine while plugged in.
    Quite honestly, I don't always trust the "geniuses". Some seem sharp, some, much less so. I ask you guys first, before I go back tonight, what are your impressions on this problem? What are specific things I should be asking the "geniuses" tonight?
    A laptop is useless to me if I can't actually move it around while running, I've gotta get this resolved, and I really dont want to ship my machine out.
    Any questions I can answer about th esituation, let me know, and THANK YOU, in advance.

    Very interesting. When I upgraded my RAM I had a load of trouble with that outer slot. The little "eject" bar swayed both ways and didn't really kick the card out, I eventually used a swall tweezer to help get it out. (I'd probably want to put the original Apple RAM back in there before bringing back to store huh?)
    Anyway... it is infact right around that area where my fingers push up when I try to pick up the computer....this is all kind of making sense now. Being a refurb, also noticed a tiny screw was installed crooked behind the L bar, leading me to belive someone has already gone somewhat deep in there before I ever got the machine.... ****, I hope I didn't get a lemon macbook. discounteggroll, I'm in Westchester, NY. I have two Apple stores around me that I can get to fairly easily... we're you implying they might do it there?
    Also, side question: If I did have to send my comp out for an extended period, would it be crazy to want to swap out my HD? I'm not really interested in people potentially going through all my personal stuff, y'know?
    And again, it brings me back to the AC cord... would/could it really be a logic board issue, even if th ecomputer is fine while plugged in?
    Thanks again for all your help

Maybe you are looking for

  • Error when starting a Process

    Hi everyone, I am using NetWeaver 7.0 SP13, and I am trying to start a process that was created previously, however I get the following exception: com.sap.caf.eu.gp.exception.api.GPEngineException: Error filling role role.administrator of role type 3

  • Sap hr - deleting custom infotype

    Hi, Is it possible to delete custom infotype ? If I delete a custom infotype, will I be able to use the same code to create a different custom infotype. Rgds, Santosh

  • TopLink UOW commit fails with no exception

    I have a simple toplink example trying to insert a record into a simple table with no relationships when an error in our application is thrown. The code will work for a seemingly random amount of transactions then it will stop working. Looking at the

  • Lacie hard drive, how do I view the files in Finder so I can delete some backups made by TimeMachine?

    I have a 500GB La Cie external hard drive which Time Machine says is now too full to make way for the next backup. I thought it would automatically delete the earliest backup to make way for the new but apparently not. Can I look at the files in Find

  • Editing a page's "p_step_sub_title" - How to?

    Application Express 4.1.0.00.32 Oracle 11R{something} IE 8 I copied another project here. The tab showed the Tab Label and below that the page's "p_step_sub_title". I changed the Tab Label. Now the page's tab shows the Tab Label and also below that t