Skype sound with port replicator

I'm on a new Portege M780 tablet w/ Win 7 Prof and attached to a port replicator. I have changed the output sound to the laptop even when connected to the port replicator. (The normal default when connected to the replicator has output from the replicator sound playback port.) With the adjusted through-the-laptop setting, all sound plays through the laptop speakers (which is what I want), except for Skype, which still outputs through the port replicator sound port. Can this be changed to what I want: sound from Skype out the laptop speakers?

@indicter
Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
Thank you,
Omar
I Work for HP

Similar Messages

External keyboard only works after reboot with Port Replicator III Plus

The problem is that when I boot the notebook, the external PS/2 keyboard doesn't work. When I reboot the keyboard flips on and then I can use it.
This problem occurs on a Toshiba Tecra notebook with a Advanced Port Replicator III Plus. I've used several keyboards, so that isn't the problem. I've changed a value in the bios which is used for USB devices (mouse/keyboard). I disabled the option, because I use a PS/2 mouse and keyboard, but the problem isn't solved. I hope someone has an answer to this problem.

Hello
I presume that there is something wrong with docking procedure and touchpad. Try to disable the Touchpad while the Notebook is docked.
Try also to install mobile extensions again.

Tecra R840: Usage of 3 monitors with Port Replicator II

Hey All,
Just got an R840 with the corresponding port rep II, I have hooked up the digital and analogue monitors and was wondering if I could use all 3 displays (including the laptops display).
In the resloution section it shows all 3, but it will only allow 2, is there a setting that is needed to be changed or a different driver as when I extend the display to the 3rd display it says it can't save the action?
Thanks
Corey

Hi
According to the user manual you can use two external monitors simultaneously.
So you can use the monitor connected to VGA port as primary and the monitor connected to DVI port as secondary display.
<img src='http://img84.imageshack.us/img84/4374/advpr.jpg' border='0'/>
As far as I know you can use 3 monitors in connection with a Toshiba Dynadock.

X1 and USB Port Replicator with digital video - hangs system

Hi
with the X1 to help with docking it everyday at the office I have a USB Port replicator with digital video. I am not using the digital video but the USB ports, head phone and mics plus ethernet.
When I plug it in it detects it OK, I then installed the software. But after reboot it looks to stall when logging into windows, screen flickers back and forth and locks up the operating system. I unlplug it and reboot and window is working fine.
Note as I mentioned I am not using the digital output but instead using an external monitor via the display port on the back of the laptop.
Also its is very slow to boot (Lenovo bios splash screen is there for about a minute)
I have gone into the bios and turned off all other bootable devices just leaving the laptops hard drive.
As a work around I have removed the software and I am getting the basic functionality of the port replicator, but not the ethernet.
I have run the update manager but does not appear to show a need to update the drivers.
Model X1 (1293-CTO)
Windows 7

Hi, I have this same exact problem.
Video (anything from youtube to downloaded shows, movies) will freeze for 5-7 seconds at a time. The sound continues to play while the video is 'frozen', and the video resumes after that.
It will happen on its own, with no bumping, but it is more prone to happen if I do something like increase the volume within the media player.
Any suggestions are much appreciated!

X301 has no sound when plugged into port replicator

Hi
We have a x301 model 2777-cto with a port replicator model 45k1610.
We first had the issue with the blue screen and not lenovo SA or IBM could assist. I found the solution on here.
No i have a new problem. When the port replicator is plugged in, there is no sound on the machine? Once the port replicator is unplugged, the sound works fine?
Any ideas or tips will be much appreciated.
Eugene
Solved!
Go to Solution.

When you connect to the port rep, the audio should be routed to the audio port on the port rep by default, not your system. There should be a setting via the task bar icon for the port rep driver that sends the audio back to your sysetm jack.

USB PORT REPLICATOR WITH DIGITAL VIDEO JUMPING BETWEEN LAPTOP SCREEN AND LCD

Hi,
I have an E330 connected to the above port replicator and I am having an issue where I could be working away on a document and all of a sudden the screen on my LCD freezes and goes blank, then my laptop screen boots up for about 3 seconds then it switches back to the LCD.
I have noticed that it only seems to happen when I am either using the scroll wheel on the mouse or clicking on the mouse button.
Any suggested fixes would be welcome
Graeme

This sounds like the USB dock is dropping off the USB bus and then reconnecting. This could be a problem with the USB 3.0 hub in the dock.
Lenovo have made a firmware update available for the USB 3.0 hub in this dock, that could solve the issue:
http://support.lenovo.com/en_GB/guides-and-manuals/detail.page?DocID=UM014961
It is also work making sure your USB 3.0 host controller drivers are up to date if you are using Windows 7. Links to the latest USB 3.0 HC drivers can be found here:
http://kb.displaylink.com/315
I *think* it is an Intel USB 3.0 chipset on this laptop.
Wim

HP 2005pr USB 2.0 Port Replicator - Video not with my Surface Pro 3

Hi everyone,
I've spent tons of hours already trying to get the HP 2005pr USB 2.0 Port Replicator working with my Surface Pro 3 and no luck. I mean, the USB replication / hub works, meaning that if I plug in a USB mouse / keyboard, they work. It recognizes the device in Device Manager and the ViewSpan application is running. But if I plug in a display in the VGA, nothing happens, no monitor gets detected, and even if I "force-detect" one it still doesn't display anything.
I've tried with 3 driver versions so far:
0.2.5 - not working at all. Reboots my Surface while installing. (this one is on the device itself).
3.X - which is the first with support for Windows 8 I think. I can install it and everything works as described above - meaning no VGA.
5.3.X - same story as above.
I've tried uninstalling, restarting and uninstalling several times with both versions. No luck. And I've literally been on every forum where people have problems with the replicator and nothing helped.
Anyone had any luck getting such a setup to work?
Or any ideas on how to get it to work?
Thanks.

Hi @blinkk2
I see that you are having problem connecting an external monitor to your Microsoft Surface Pro 3 through the HP USB Port Replicator. As the USB ports are working with the mouse and keyboard we know what the Port Replicator itself is working this is going to be something with the drivers on the Surface. I would recommend contacting Microsoft Support to see if they can recommend a graphics driver for you.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

Video issues with USB port replicator with Digital Video

I have a T400 running Windows XP SP3 32-bit, with the graphics mode set to use the ATI video card. I'm also using the latest approved Lenovo ATI driver for this machine.
I have two issues, one of which I consider major:
1) Sometimes when I plug in the replicator (got the latest drivers off of the Lenovo download site) everything works great, and other times the monitor never powers up. I plug the replicator into my laptop and the external keyboard and mouse work and the port replicator system tray icon appears, but the monitor is still in power-saving mode. If I try to activate the monitor by "extending" or "mirroring" it, it comes up with a pop-up that says:
"ThinkPad USB port rep. device: Error" - "Fail when adding device instance into driver!"
2) This is more of an annoyance, but I noticed when the monitor does work that black areas of the screen end up getting sparkly green lines through them. They aren't "actually there" in the sense that it's not corruption from the computer, they are simply artifacts of what seems to be some signalling problem.
Any help is greatly appreciated.

wim1234 wrote:
We (DispkayLink) have tested office 2013 and not found any BSODs so there must be something system specific.
Could you gather the system logs and post here so we can see what might be wrong? Details on how to do this are here:
http://kb.displaylink.com/269
Thanks
Wim
Your reply is 2 months later, I had to revert to Office 2010 and return the laptop to the end user.
But, I got another model of the same laptop right now which can be used to test it, I will let you know if it works out this time with the lates DisplayLink software for Windows.

USB Port Replicator 2nd monitor doesn't work on restart with Vista

Greetings wise wizards of Lenovo:
I'm helping a friend with the USB Port Replicator, who is running Windows Vista Home Premium on her Acer laptop. She has all of the necessary hardware requirements, and I've installed the Lenovo USB Port Replicator drivers with once with Vista (automatically installing the drivers), once with the CD, and finally from the Lenovo website. The problem is that the port replicator works fine upon installation, but as soon as Vista is restarted, not only does a second monitor not appear automatically, it doesn't appear at all.
Connecting the second monitor to the laptop VGA port works fine, and I can extend the desktop across both the laptop and the second monitor... it is only a problem on restart with the port replicator. I've uninstalled and resintalled three times now, once with letting Vista provide the drivers automatically, once with the CD, and once with the website download.
Any suggestions will be highly appreciated.
Many thanks in advance,
Zovoth

Mines not working on XP. Works fine until I re-boot then I have a hard time getting it to work. I've tried unplugging the ac adapter, usb, tried switching my monitors and still nothing. Both monitors are functioning properly. The icon for the repilicator does not show up down the clock. It's in my program files with the only option to uninstall.
Comon Lenovo, there hasn't been an answer to this question since 2008???

Dual display with Lenovo USB Port Replicator 43R8770

Hi,
I have installed the Lenovo USB port replicator using the 1.0.0.1 drivers. I am running Windows XP on a Thinkpad X300.
I can successfully get into dual display mode but when I try to make the external monitor my primary display it will not work. It just switches my primary monitor back the notebook LCD without displaying any errors.
If I disable the notebook display I can set the external as the primary but as long as the notebook is enable the external cannot be set as the primary.
Has anyone ever seen this before?
Solved!
Go to Solution.

I know it's an old discussion, but I wanted to post instructions on getting the dual-monitor setup working, as it took me a while to get it right.  This is using a Lenovo x301 with Windows XP SP3,
Lenovo Enhanced USB Port Replicator and 2 Dell 19" 1280x1024 analog flat panel monitors (I know..I know...)  My
boss didn't want to use the Laptop display.  Just the two external monitors.  Note: before proceding, please make
sure you've installed the Port Replicator drivers.
Connect left monitor (primary display) to x301 VGA port.
Connect right monitor (extended display) to Port Replicator VGA port.
Click on the Intel(r) Graphics Media Accelerator Driver for Mobile icon in the system tray and select GRAPHICS OPTIONS --> OUTPUT TO --> MONITOR
Click on the Lenovo Display Adapter icon in the system tray and select EXTEND TO --> RIGHT
Hope someone finds this helpful down the road.
Message Edited by BMCit on 01-28-2009 01:56 PM

Port replicator sound issues

Hi. I have a Lenove x300 laptop (running XP) hooked up to a Lenovo port replicator. I have external speakers hooked up to the port replicator. Recently, the speakers have stopped working. If I plug the speakers directly into my laptop, they work fine, but if I plug them into the port replicator, the sound comes out of the laptop, not the external speakers. I recently installed ITunes and Audacity. Is it possible that's what caused the problem? If anyone has any suggestions, I'd be grateful. Thanks.

How did you do this? I dont see an option for changing the port in the Control Panel -> Sound ->Playback menu.
Ive been to many other blogs and threads and your the only who may have found the solution.
thanks

X300 with Distorted Video With USB Port Replicator

I have 2 X300s using the enhanced port replicators. The video on these two machines were fine for the last 2 months until last week. The video is distorted while connected to the VGA port on the replicator, but fine when connected to the onboard video. I replaced the port replicators and that seem to resolve the issue for day but the distorted video came back. Has anyone encountered this and is there fix? Both machines are on XP.

Hello Rudi,
Thank you so much for the reply.
We tried today another T440 laptop with 64bit OS and as mentioned by you, we figured out that the conflict is happening between Intel Graphics 4400 driver with USB replicator.
When I done an uninstallation of the updated Intel Graphics and the USB replicator works fine.
As the laptop will be provided to HOD, so we will be going for a purchase of a replicator with good compatibility with 64 OS and intel video card.
Appreciate your reply.
Good day ahead.

Need Advanced Port Replicator III drivers to use it with my Portege M300

Hi,
I have a Portege M300 with an Advanced Port Replicator III. I've had to reinstall the operating system and now can't find any drivers for the port replicator.
Can anyone help me out? I'm running Win XP
thanks

Hi
I assume you need drivers for the XP OS. Am I right???
On the Toshiba driver page you will find all necessary drivers and utilities for Portg M300.
There you will find also the installation instruction document. This document shows the right installation order.
You should simply download all drivers and follow the installation order. Thats all

Enhanced USB Port Replicator under Vista with blank taskbar

I have an annoying bug where the vista taskbar goes blank under Vista. I'm running an X300 with the Enhanced USB Port Replicator attached to an external monitor. I have set the external monitor as the primary monitor. With this configuration, the taskbar usually goes blank -- i.e. the taskbar shows nothing except a window frame and the start button. There are no applications shown, no quicklaunch icons, no tooltray icons... nothing. The taskbar is still functioning correctly, and it will show thumbnails of open applications, or allow you to click on any items that are there but not displayed. Any idea why this bug is there or how to fix it.
I found it really annoying and problematic till I found an quick workaround... unlock the taskbar and stretch it out and it will begin displaying properly again.

I have an X301 running Vista Business. The 2 second freezes are really annoying.
Has anyone tried the displaylink driver http://www.displaylink.com/downloads.html to see if it helps?

Skype sound with port replicator

Similar Messages

Maybe you are looking for