Skype status in flash

I want to include skype status in my flash website. But i am not sure how to create the skype status system. Any ideas?

Same happens with Version 7.7 (335) skype for mac since the last update.

Similar Messages

My airport time capsule did not set up successfully, and then status light flash amber

Hi, Guys
I am the first time user of the time capsule, please help how to proceed?
I have set up the first time and my airport time capsule does not set successfully, then I try to reset to factory setting. After this, although I use the ethenet cable to connect the router to the airport, the status light flash amber, always, even after the reset.
Also, I can see that airport time capsule base station from the wireless network when airport is plugged in. However, when I want to access to it.

Thanks for your guidance, but the product is really anoying. First, I am sure that the airpor utilities is 6.3.
and I also follow your instruction that to set the IPv6 as local link mode. But still get the same error as mentioned in my first post.
Therefore, I have tried to use the bridge mode but could not find it, and therefore still can not set it up successfully, even though I reset the factory again(press the reset button 5 secconds at least).

Apple TV loses picture output and status light flashes rapidly after 5 minutes hooked up via HDMI - DVI cable

Apple TV connected to a 2005 50" plasma monitor with DVI input via belekin HDMI to DVI cable. Unit worked perfectly long enough to get it connected to the wireless network and begin the itunes registration process when there was a loss of signal message on the screen from the monitor and the Apple TV status light flashed rapidly and continuously. Reset and reboot yeilded flashing rapid status light and no output detected from the monitor. I contacted support online and was told to return the unit to the apple store. I returned home with another brand new apple tv and connected it in the same manner with exactly the same results. Is there something with the HDMI - DVI interface that is causing this? Are there known issues with the HDMI - DVI connection to Apple TV with older plasma monitors?

The Apple TV doesn't actually support DVI. Some have managed to get it to work others have had varying issues with it.

Installed Skype and now Flash Player won't open in new window

I installed the latest version of Skype and now Flash Player does not work properly.
I just bought a new laptop, it has Windows 7, 32 bit, IE 9, and Flash 10.
A website that I go to all the time uses Flash Player so when you click on a link in the site it pops out the player into a new window and you can listen while you still browse on their site. After I installed Skype last night, that 'pop-out' function is no longer there. The player now replaces the webpage and it is very large and distorted because it is supposed to be in a small pop-out window. No matter what I click, I can't get the link to open in a new window, it always opens in the same window replacing the webpage.
I uninstalled Skype and then used the manual uninstaller of Flash because the uninstall would not work from the uninstall screen in Windows. I then reinstalled the latest version of Flash Player and I still have the same problem.
Is this a setting that I can change somewhere??
Thank you.

Hi eidnolb, thanks for the reply.
I did uninstall the google toolbar that was installed with skype.
I now found that it is not just flash player that won't open in a new window, I can't get any link at all to open in a new tab or a new window.
I tried restoring IE's settings and that did not work.
I know this is an adobe forum and my problem is now much larger than just adobe, but if you have any suggestions, I would appreciate it.
Thanks.

Skype status is always available on windows, even ...

skype status is always available on windows, even after logging out. how to fix that?

Alright, so if you have tried the previous steps and it did not work, then let's try something else.
Do you have another account? If so: Sign into the other account and add yourself. Sign back into your own account and add your other account. Sign off your main account and sign onto your other account and check your online status. If you are still online, you may have followed the previous step improperly or someone may have hijacked your account via the P2P version of Skype (which you should change your password right away so that the other user will be logged out.)
That being said, you can also have a friend or family member who has you on their contact list call you to determine if the account rings after you knowingly disconnected everywhere. If it rings, someone running under the older protocol of Skype may be utilising your account without your notice (or your account has been hijacked.)
If, in any situation, you choose to call your own account after you're knowingly offline and someone you do not know answers your call, do not attempt to acquaint with the hijacker or unknown person on your own as it may not be the best course of action to take for recovering your account. Do not interact with those you do not know and simply hang up right away if you do not feel comfortable speaking with the unknown person.
So let me run down the steps for you:
Check what others see of you.
If others still see you online and you followed the previous post completely and it still occurs, change your password immediately. Someone could be using Skype's older protocol to get into your account. Changing your password will sign them off.
Should you choose to, you can have someone call the always available account and observe the response. If someone responds and you do not know them, do not attempt to get acquainted with them.
Hopefully, this time around, this solution should help you. I know it sounds complex, but if you're saying you've tried absolutely everything else, then maybe getting creative should be pretty interesting enough to work.
I.T. Professional
Virtualisation Solutions (VCA-DCV - VMware)
Donating time to help you here with your Skype needs.
If I've answered your question, feel free to "Kudo" me!

Im trying to download skype and adobe flash player however i cant download anything because i get this message saying either access denied or some technical error in the gateway/proxy??

My Macbook pro is brand new and im trying to download some applications such as skype and adobe flash player however whenever i try to i cant because either the site im on shifts and says access denied or some technical problem occurs? Very much appreciated.

You might want ot ask in the MBP forum as well as in the SL 10.6 forum.

Status LED Flashes 5 times?

There are only nine terminal bases in the back and no terminal bases were added to the bank while the power was supplied. Is there any other reason for this error? Any help would be greatly appreciated.

The status light flashing 5 times means different things for different network modules. Without knowing which network module you are using, I can not provide specific information.
It is most commonly seen with the FP-1000/1001 Serial Network modules when an I/O module is unrecognizable. This can happen in the following circumstances:
1) A module that may have been connected previously was not available when Find Devices! was issued.
2) The firmware of the network module may not be updated to support the I/O module. For the latest driver version of a FP-1000/1001, the link is:
ftp://ftp.ni.com/support/fieldpoint/Update/FPupdate.zip
3) There may be 10 bases on a bus but the system only supports up to 9.
4) There may be a bent pin at the point where the module connect
s to the base.
5) The terminal bases were connected or disconnected with power applied resulting in a bus failure condition.
Regards,
Aaron

Cisco 1130 status light flashing orange

hello,
I have a question, I have an ap (cisco 1130) that began to get the status light flashing orange and light Ethernet and radio are off.
I did a factory reset and it was ok ... past 3 days the problem has happened again ...
I changed the ap with a new but the situation remained ...
I tested the wiring and everything is ok.
the switch port is set up correctly
may be what??
problem switch??or problem ap??

hello,
I connect the console in to the WAP and then reboot the result of the bootup is as follows:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6858240
flashfs[0]: Bytes available: 9140736
flashfs[0]: flashfs fsck took 31 seconds.
Base ethernet MAC Address: 00:24:97:6e:2c:e2
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
link auto-negotiating....
auto-negotiation takes 10000 milli-seconds to complete
ERROR: timeout waiting for auto-negotiation to complete
ERROR: fail to bring ethernet link up
The system has been encountered an error initializing
ethernet port. You may need to check hardware
The system is ignoring the error and continuing boot.
If you interrupt the system boot process, the following
commands will reinitialize ethernet, tftp, and finish
loading the operating system software:
    ether_init
    tftp_init
    boot
Loading "flash:/c1130-k9w8-mx.124-23c.JZ/c1130-k9w8-mx.124-23c.JZ"...########################################################################################################################################################################################################################################################################################################################################################################################################################################################
File "flash:/c1130-k9w8-mx.124-23c.JZ/c1130-k9w8-mx.124-23c.JZ" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(23c)JZ, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 06-Apr-11 15:01 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15740928
flashfs[1]: Bytes used: 6858240
flashfs[1]: Bytes available: 8882688
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
Radio0 present A506 7100 E8000000 A0000000 80000000 3
Radio1 present A506 6700 E8000100 A0040000 80010000 2
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision B0) with 25590K/7168K bytes of memory.
Processor board ID FCZ1317Q102
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 7.0.98.218
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:24:97:6E:2C:E2
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC13142PXW
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1317Q102
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:05.864: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:07.480: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:09.066: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:09.154: %LWAPP-3-CLIENTEVENTLOG: Unable to open event log file flash:/event.log
*Mar 1 00:00:09.155: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 0 messages)
*Mar 1 00:00:09.184: status of voice_diag_test from WLC is false
*Mar 1 00:00:11.294: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:11.358: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(23c)JZ, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 06-Apr-11 15:01 by prod_rel_team
*Mar 1 00:00:11.358: %SNMP-5-COLDSTART: SNMP agent on host CC-P2-AP4 is undergoing a cold start
*Mar 1 00:00:11.437: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:00:11.615: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:11.615: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:11.615: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:11.877: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:11.877: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:12.297: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Mar 1 00:00:12.615: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:12.615: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:30.265: status of voice_diag_test from WLC is false
*Mar 1 00:00:30.308: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:00:40.348: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:00:41.348: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
*Mar 1 00:00:50.348: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:01:00.348: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:01:10.348: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:01:14.626: %CDP_PD-4-POWER_OK: Full power - NON_CISCO-NO_CDP_RECEIVED inline power source
*Mar 1 00:01:14.665: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:01:14.703: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:01:15.627: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:01:15.665: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:01:20.348: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:01:30.348: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:01:30.348: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Mar 1 00:01:40.356: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:01:50.356: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:02:00.356: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:02:10.356: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:02:20.356: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:02:20.356: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Mar 1 00:02:30.359: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:02:40.359: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:02:50.359: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:03:00.359: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:03:10.359: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:03:10.359: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Mar 1 00:03:20.362: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:03:30.362: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
I was checking another thing, usually the switches we use here in my work supports a maximum of 14W per port or 15.4w, this wap is consuming 15.2w
Is this the problem??
the strange to me is that,in this same sw I have several WAP and they all use 12.2w
The device type in sw for WAP usually appears as LAP1131AG-AIR-E-K9 ... but this WAP appears as Ieee PD ...
What problems do you think is it?

Status light flashes. Apple on TV.

Been using Apple TV more frequently lately. All of a sudden status light flashing continuously and an apple on the screen. I have unplugged everything for an hour and still no luck. held down menu button and other buttons...no luck. Please help so we can watch Apple TV again! Do I need to "reboot"? If so, how!

Hello Kardsy,
The links below detail how to restore both the 1st generation Apple TV and the 2nd and 3rd generation Apple TVs.
Apple TV (1st generation): How to perform a factory restore
http://support.apple.com/kb/HT3199
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/HT4367
Cheers,
Allen

3 status lights flash rapidly only after unplugging it stop

Whenever I use Airport setup assistant to make changes to my existing setting, and when the base station should be restarted it stops sending a signal and then all three status lights flash rapidly and also simultaneously. This is a replacement base station as the previous had its wan port fried. When it was first plugged in it gave this same problem. Only after plugging out the power chord and waiting for say 1 minute, then plugging it back in did the flashing stop and the base station started sending a signal again. This also occurred during the first set up using airport admin utility. It hasnt happened since (when using admin utility)but continues to happen when I use airport setup assistant. Is it sumthing I should be worried about?

Sounds like your Airport Base Station is operating just fine - I wouldn't worry about it.

AP Express status light flashing amber for no apparent reason, network works fine

AP Express status light flashing amber for no apparent reason, network works fine, any ideas?

It flashes amber when there is some kind of conflict. If the internet is working but the amber light bothers you, airport utility ahould tell you why your airport is reporting a problem.
If airport utility thinks your airport is normal and the amber light bothers you, do a hard reset on the device

Skype Buttons: Check Skype status and show it on t...

Hello. All!
A little time ago old Skype buttons were disabled.
Microsoft recommends to use new buttons.
At first, new buttos has terrible design. However I could use its, BUT...
New buttons do not show MY SKYPE STATUS!
It was very useful feature of Skype buttons for web.
So question is:
How can I check my own Skype status (on-line; off-line; away; etc.) and show it on my web site?
Sincerely yours
dr. Andrey V.Kuzmin
P.S.
I tried to search correspondent function in the skype-uri.js, but did not find

Hello. All!
A little time ago old Skype buttons were disabled.
Microsoft recommends to use new buttons.
At first, new buttos has terrible design. However I could use its, BUT...
New buttons do not show MY SKYPE STATUS!
It was very useful feature of Skype buttons for web.
So question is:
How can I check my own Skype status (on-line; off-line; away; etc.) and show it on my web site?
Sincerely yours
dr. Andrey V.Kuzmin
P.S.
I tried to search correspondent function in the skype-uri.js, but did not find

HT204492 If you're using the paired remote and the Apple TV status light flashes white, the problem isn't with the remote.

If you’re using the paired remote and the Apple TV status light flashes white, the problem isn’t with the remote.
Then what is the problem since I have troubleshoot my remote, it is working but cannot do anything on apple TV?

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

CompactRIO unusual error status LED flashing continuously

Hi,
I have a cRIO 9014 controller with an error i can't solve.
After re-installing LV 8.5 on my laptop MAX could see the controller but with the VISA and NI-RIO error. I wanted to obtain the IP address from the DHCP server (before i used the static IP address without any problems), rebooted the controller and the status LED started flashing continuously every 1 second. (unrecoverable error or corrupted flash memory card)
I rebooted the controller several times with IP reset but LED is still flashing. Also in MAX i can't see the controller anymore so reformatting controller is not possible.
Firewall is off, crossover cable is connected, IP of host is ok but no cRIO in MAX
Found a similar problem on the forum http://forums.ni.com/ni/board/message?board.id=170&message.id=238333&query.id=24781#M238333 but it didn't solve my problem unfortunately.
Thanks for your help!
Greetings from the Netherlands

Hello TrabW,
Thank you for your post on our webforum.
Can you try to start up the controller in safe mode? Is it possible to ping the controller? Please try the default IP address and the one you entered (in case the controller didn't reset the IP). Please let me know the results,
Best regards,
Martijn S
Applications Engineer
NI Netherlands

CFP 2110 - Status led flashing continously

I'm running into problem with a cFP 2110.
During the debugging of my RT application on the cFP, I get an error message "Host IP address not in the access list". At this time, I was unable to download any application to the cFP. the VI server IP access list was configured with *. So all the IP address can access to the cFP.
I found a procedure on the ni web site to reset the system.
-Set to safe mode
-ftp the cFP and delete all the file
-Remove the safe mode.
It means that there is no more OS or LabVIEW RT on the system.
Now, When I restart the cFP, the Status led is flashing continously (1 flash / 1.5s) and I don't have access anymore to the cFP in MAX.. Can some one help me on this case ? .
Thanks
Attachments:
Ni_recommendations.pdf ‏126 KB

Hi Poussin,
I would recommend flipping the Reset IP dip switch (dip switch 7). This
should get the controller to show up in Measurement and Automation
Explorer(MAX) as 0.0.0.0. If you can't see the controller, you may want
to try turning off your firewall. Often computer firewalls will prevent
customers from seeing unconfigured controllers in MAX.
Once you find your controller, you can flip the reset IP dip switch back to the
off position and reset the IP address. For more information on this,
click on your FieldPoint controller in MAX that will be displayed as
0.0.0.0. In the MAX help that appears on the right, click on the link
titled, "Configure Network Settings." If you need assistance
choosing an IP address, please look at this KnowledgeBase.
Once you have assigned an IP address to the controller, the status light should
stop blinking once. You will then need to install software.
Here is a general
document that describes how to assign an IP address and install software.
Please let me know if you have any other questions.
Regards,
Ching P.
DAQ and Academic Hardware R&D
National Instruments

Skype status in flash

Similar Messages

Maybe you are looking for