Skype stop working when start Windows 8

My skype dont work. I know where is the problem. Its the Hauppage thing. Error file is MFCORE.DLL I founded "HCWClear" installer. I runned it and it says its not for 64bit versions. So how i can delete those Hauppage things if i cant use the installer and i didnt found 64Bit version of the HCWClear. Thanks.

PROBLEM SOLVED!  

Similar Messages

  • Stops working when  "Starting up panels..."

    Just bought Adobe Creative Suite 5.5 Design Standard.  InDesign refuses to load.  I get the error message:
    Adobe InDesign CS5.5 has stopped working.
    A problem caused the program to stop working correctly.
    Windows will close the program and notify you if a solution is available.
    Illustrator and Photoshop load and seem to work okay.  (Did not go beyond loading program.)
    I uninstalled and reinstalled the suite but still can only load Illustrator and Photoshop.
    InDesign stops loading when it gets to "Starting up panels..."
    I did change the resolution so my monitor displayed correctly.
    Any suggestions?

    I'm having pretty much the same problem.  When I try to launch InDesign CS5.5 I receive the error message from Windows:  Adobe InDesign CS5.5 has stopped working.
    I have the Creative Suite 5.5 Design Premium Student and Teacher Edition, running on Windows 7 Home Edition Premium 64 bit
    I have tried opening InDesign directly and get the error message, and I've tried opening from a document and get the same message.
    Recently I had to move to a new computer, as my old hard-drive boot died on the old one, so I was not able to uninstall Creative Suite 5.5 from the old computer.  However, the rest of the Suite works fine, just not InDesign.
    I have tried the fix as per Peter Spiers' post above; I renamed the InDesign SavedData file, but there was no InDesign Defaults file.  I searched for adobefnt*.lst files, but there were none.
    I've not successfully used InDesign since loading it on this new computer, so perhaps this makes a difference?

  • Premiere pro stopped working when starting help me

    My Premiere Pro CC keeps giving me a "premiere pro stopped working" when I try to start it. What do I do?

    Hello Genero,
    I'll see if I can help you out a bit here.
    There could be a number of different issues causing this problem...
    So if possible could you please let me know what operating system you are working on (Windows or Mac)
    Have you been using PP for a while and it just started this behaviour, or have you just recently installed and have not been unable to use the software at all?
    What is your setup like?
    A few things to try:
    -Reset your Preferences:
    When launching Premiere Pro from either a Mac or PC, hold down two keys while launching. This automatically throws away Premiere’s preferences.
    For the Mac, press Shift+Option
    For the PC, press Shift+Alt
    In both cases, continue holding the keys until the splash screen appears. You will know you successfully trashed preferences when the splash screen doesn’t have projects listed.
    -Add the newest update to Premiere Pro software, if you are not already up to date.
    -Install the most up to date driver for your graphics card and restart your computer.
    Please get back to me and let me know if that helped at all!
    Cheers
    Jasper

  • Elements 10 organizer stops working when started

    Hi all, hope you had a good Chrimbo!!!
    I'm running Elements 10 under Vista SP2., when opening organizer it loads images then stops working.
    Error window says "elements as stopped working, Close the programme... etc etc..
    Anyone know the cause and how to resolve this problem please.
    Bookkeeper100

    Review the similar threads and try the solutions mentioned for creating new catalog and check.
    http://forums.adobe.com/message/4887225
    http://forums.adobe.com/message/4912399
    Thanks,
    Garry

  • Skype stop working when i call someone

     Hello, 
    When i try call someone, skype stops working...
    I've ran dxdaig.exe and attached the file.
    Solved!
    Go to Solution.
    Attachments:
    DxDiag.zip ‏13 KB

    There are crash reports referring to Catalyst Control Center (CCC.exe).
    Try to adjust settings in Catalyst Control Center:
    - set all options in "Game" menu of Catalyst Control Center to "Application Controlled"
    - change the smooth-vision anti-aliasing to use application settings.

  • Tuchpad stops working when starting any app

    Hi,
    My mousepointer stops when starting any app. Works fine after starting anything, at the desktop, but  as soon as I start any program, systemsettings or else it stops to work.

    I'm having pretty much the same problem.  When I try to launch InDesign CS5.5 I receive the error message from Windows:  Adobe InDesign CS5.5 has stopped working.
    I have the Creative Suite 5.5 Design Premium Student and Teacher Edition, running on Windows 7 Home Edition Premium 64 bit
    I have tried opening InDesign directly and get the error message, and I've tried opening from a document and get the same message.
    Recently I had to move to a new computer, as my old hard-drive boot died on the old one, so I was not able to uninstall Creative Suite 5.5 from the old computer.  However, the rest of the Suite works fine, just not InDesign.
    I have tried the fix as per Peter Spiers' post above; I renamed the InDesign SavedData file, but there was no InDesign Defaults file.  I searched for adobefnt*.lst files, but there were none.
    I've not successfully used InDesign since loading it on this new computer, so perhaps this makes a difference?

  • Skype Says Skype stopped working when I log in.

    Today I was going to log in to Skype but as soon as Skype was finished loading after logging in, it "Stopped working" and it dosnt matter if I uninstall and install. I tried to find a solution on the community but nothing helped. Here is my error code if it helps
    Skype.exe
       7.0.85.102
       54897b0f
       Skype.exe
       7.0.85.102
       54897b0f
       c0000005
       00d517d7
       748
       01d01b1349fe8f99
       C:\Program Files (x86)\Skype\Phone\Skype.exe
       C:\Program 
    please help

    Please,  run the DirectX diagnostics tool (32-bit option).
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Elements 10 stops working when starting Photomerge - Panorama

    I have selected two photos and then went to File, New, Photomerge-Panorama.  The program starts then I get a message that the program has stopped working and I should close it.  I have tried to start the Panorama from the Organizer and from the Editor with the same results.  I can use the Editor for other editing and it works normally.
    The two photos were obtained from my scanner.  I scanned a large document and saved the scans as JPEG files.  I have done this previously and have made panoramas of other photo series and it has worked.
    I have Windows 8.1.  I don't think I have tried to make panoramas since I went to Windows 8.1

    I had the same problem with Photomerge panorama (PS Elements 9) on my new Windows 8.1 HP laptop.
    I found a post over on a thread about CS5 talking about dual video graphics drivers. My laptop has both Intel and Nvidia chips and drivers, and after I disabled the Nvidia driver in Windows Device Manager, so that I use only the native Intel graphics, Photomerge Panorama comes up fine. My external big monitor looks crisper with the Nvidia graphics enabled, but I can re-enable that easily after I am done with Photomerge.

  • My skype stop working when i sign in

    So today my skype made an update and then when skype opened it stoped working.Then reinstalled it and didnt work.Can someone please help me? ;(
     This is the error
    Bucket incorrect, type 0
    Event Name: APPCRASH
    Answer: Not available
    CAB ID: 0
    Problem signature:
    P1: Skype.exe
    P2: 7.0.85.102
    P3: 54897b0f
    P4: FaceRigVirtualCam.ax
    P5: 0.0.0.0
    P6: 53fdab28
    P7: c0000005
    P8: 00005e55
    P9:
    P10:
    File attachments:
    C: \ Users \ Kagari \ AppData \ Local \ Temp \ WER4E3F.tmp.WERInternalMetadata.xml
    The files may be available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_Skype.exe_c9658b4327d4e7bacf96b81395b945dda2e22e8_184053ab
    Symbol analysis:
    New search of solutions: 0
    Report ID: 46a9858c-86f0-11e4-9dcc-e03f49832c4b
    Status report: 1
    Solved!
    Go to Solution.

    There is already a working solution that has been confirmed by some of our users to get both Skype and FaceRig working together again.   Seems to have to do with the default webcam settings from skype (and as you can see from the post above, is not particular to the FaceRig virtual cam , it affects quite a few other aplications as well) . The short version of the fix is:
    1. Go to Steam Client and do a "remove local application data" on FaceRig
    2. Go though the initial setup process on Skype or visit the webcam setting menu and make sure everything is working and everything is updated.
    3. Re-install facerig (skip reinstalling the open codecs if you already have them installed) 
    Now everything should be working. 
    I reccomend reading the detailed step by step :
    http://steamcommunity.com/app/274920/discussions/ ( look for the Skype 7.0.0.102 pinned thread)
    PS: if you are the tinkering type, steps 1 and 3 can be simply substituted by un-registering and then re-registering the direct show filters ( all of them)  for the FaceRig Virtual Cam  ( .bat files are provided with facerig to do exactly just that) , but most folks do not want to mess with directly registering/unregistering DirectShow filters, so it is simpler to ask for an uninstall and a re-install. 
    Note that this kind of fix might also work  for FFsplit.ax or other affected DirectShow filters too ( as this issue is not particular to FaceRig alone). 

  • Error "Licensing for this product has stopped working" when starting Adobe Photoshop CS3 Extended- XP Pro AMD; 2GB RAM

    I have exhausted all known options thus far.
    I started the Flexnet Licensing Service and restarted the system but the message continues to come up when lanching PS CS3 extended
    After restarting computer the Flexnet  Licensing Service stops again and goes into Manual mode. This also happens after a few minutes without restarting.
    I also downloaded the Flexnet Licensing Recovery Kit from Adobe Support but the file stops after saying  "please wait for a few moments.. ?"
    I changed the setting as discribed for the Flexnt folder but the message continues to come up when PS Extended CS3 is launced.
    http://kb2.adobe.com/cps/401/kb401528.html
    What else is there to do. Please help me as what I can do so I can continue to use Photoshop CS3 Extended.
    Thank you

    I downloaded the clean Script file and followed the instructions from what the Clean Script read Me file described.  The first step said to deactivate. Although I was not able to deactivate because of my original message, I followed the remaining steps.
    After using the Clean Script and uninstalling Photoshop CS3 Extended and re-installing it I re-booted my computer. I also deleted the CS3 Application data files.
    When I installed PS CS3 Extended the installer does not ask for the serial number on all attemps. I bought a registered copy of PS CS3 Extended. Is there another way to approch this licensing error.
    Thanks.

  • Itunes has stopped working when starting up trying to access itunes store

    Have a windows 7 and since installing the newest version of iTunes (12 I think), it has not worked. It always freezes on startup while trying to access the iTunes store. I have tried everything apple suggests including opening in a different user, opening in safe mode and scanning for viruses. Also tried uninstalling and reinstalling a new version. Nothing has worked.

    I am running Windows 8.1 and iTunes 11.1.3.8.  I found a simple solution by browsing through the support communities.  Here it is:   Copy QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support to: C:\Program Files (x86)\iTunes
    This worked for me.  Good luck.

  • AirPlay mirror on Apple TV stops working when a Skype or Google conversation is started (iOS 7)

    I thought it would be nice to see Skype contacts on the large screen and realised this should be possible using my Apple TV, but AirPlay (in mirror mode) on Apple TV stops working when a Skype or Google + conversation is started after showing all right on the TV till that point. I'm using iOS 7 and the problem occurs on my iPad 2 and iPhone 5. Facetime seems to be OK, and Skype works over Apple TV when using my daughter's MacBook Pro (though I haven't tried Google + on it), so I deduce that the issue is with iOS 7. I have had success one or twice with using Skype in this manner on my iPhone so it is not consistant, but this is rare and hasn't happened in my latest attempts. Unfortunately some of my Skype contacts don't have an Apple device so I often can't use Facetime.
    Is there a work around, or has Apple acknowledged this issue and said there will be a fix?

    Same problem here.
    iPhone 5s + apple TV + Skype all are up to date. Mirroring is working until the video signal starts, after that the Apple TV goes back to the Apple TV starting screen.

  • Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.

    Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.  I have tried to uninstall iTunes but the Windows uninstaller will not delete the program I get a message that says: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi.  How do I get iTunes to work again?

    Whentrying to uninstall iTunes (the first program that must be uninstalled per the instructions) I get a message:  A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. I can't even uninstall iTunes?
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
    http://majorgeeks.com/download.php?det=4459
    Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • HT1414 my ipad 2 is in recovery mode but when i start up itunes and press restore itunes stops working and the window closes, what should i do?

    my ipad 2 is in recovery mode when i plug it into itunes and my comuter to restore it itunes stops working and the window close, what should i do i really need my ipad if anyone knows how to fix it i would really apreciate the help.

    I assume that you mean that the iTunes window closes. Quit iTunes, reboot your PC and try again. The iTunes software might be corrupt and it may require reinstalling iTunes on your computer.

  • "Skype has stopped working" Error Message Windows 8.1 Skype 7.6

    Hi, I just now installed the desktop version, I was previously using the other Windows 8 version, not sure what it's called but that doesn't matter. I was trying to call my friend and it said there was a problem with my mic. Well I bought a new mic and came home and it said there was a problem with my mic. I uninstalled it and installed the desktop version, thinking it would work better, but the desktop version tells me that it cannot detect my soundcard and to reboot my laptop. Upon starting up at the welcome screen, I continued to log in, and wait for my programs to load up. I opened skype, it closes without showing up, three more times I do this before running as admin. It tries to load and then gives me the crash report "Skype has stopped working" and says windows will let me know when they find a fix. 

    Please,  run the DirectX diagnostics tool. Go to Windows Start  and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

Maybe you are looking for