Skype via 3G not showing on data usage?

I live in the US and received a skype call from a buddy in Greece. We're both using our iPhones. I'm on 3G...he is on wi-fi. We had a 5min call, but when I check AT&T data usage, I don't see any data usage that reflects my skype call using 3G. How is that?

From the call receivers point of view, a Skype call to a mobile or landline appears to be just another phone call, and is subject to any local charges you may have to pay to receive calls (you'll probably pay to receive calls if you were outside your home country). A Skype call doesn't require the person called to have Skype installed, or to have a data connection, as the routing of the call is done via the Internet, but ultimately the call is connected the same way as any other call - through the telecoms network.
If you call someone, you'll need the WiFi connection or 3G to make the call, in which case it'll show up as data usage if 3G is used.
You'll probably find that your Greek friend will pay a small charge per minute to Skype (perhaps a few cents of a Euro per minute) to make the call, but it is very cheap, even to international mobiles. Skype in turn may pay a fraction of this charge to AT&T to connect the call for you, and to your iPhone it'll probably look like it's a local call rather than an international one.
Check out the Skype pages for more info on how this works.
http://www.skype.com/intl/en/features/allfeatures/call-phones-and-mobiles/

Similar Messages

  • Hard drive storage issue - "Other" and not showing correct data usage

    I'm currently using a MacBook Pro (Retina 15" Mid 14') which I purchased less than a month ago.
    Based on my "about this mac" storage summary, I'm using over 190GB, yet I can only account 67GB of usage. I've restarted and reindexed my spotlight search twice (once via terminal, next through system preferences).
    Where is all my disc space? What am I missing?

    You might run OmniDiskSweeper and Grand Perspective in Root.  This mat find the discrepancy.
    These are the commands that you will have to enter for each in Terminal
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Naturally you will run one at a time, not simultaneously.
    Look at this as a guide:
    http://www.macobserver.com/tmo/article/how_to_recover_missing_hard_drive_space
    Note that when you enter your password, it will not be displayed.
    Before you start any thing, MAKE CERTAIN THAT YOUR DATA IS BACKED UP!
    Ciao.

  • Search Item drop-down does not show any data for Advanced Search.

    Hi,
    I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
    1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
    2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
    3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
    Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
    I am using OAF version 12.1.1.
    Thanks, Suresh

    Hi,
    I faced the same situation but i still waiting for the solution.. this is my problem's thread..
    Addition of LOV Search Filter using Personalization
    But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
    I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
    Thanks
    Renu

  • Popularity Trends not showing any data

    Hi,
    we are using SP 2013 RTM version and it is not showing any data in the usage statistics when we run the popularity trends reports. Is this a bug with SP 2013 RTM version? or am i missing something?
    Thanks
    techie

    Hi,
    Per my understanding, Popularity Trends report showing no data in your environment.
    For narrowing down the issue, I suggest you check whether the two timer jobs “Microsoft SharePoint Foundation Usage Data Import” and “Microsoft SharePoint Foundation Usage Data
    Processing” which are handling the usage report runs without issue.
    More information about how to deal with this issue for your reference:
    http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.VQKMGHkfqwU
    http://snowburnt.blogspot.com/2014/12/how-to-troubleshoot-sharepoint-usage.html
    http://geekswithblogs.net/bjackett/archive/2013/08/26/powershell-script-to-workaround-no-data-in-sharepoint-2013-usage.aspx
    Thanks
    Patrick Liang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Not showing the Data in VC application

    Hi I have developed the application in VC.
    It is showing the data some times , it is not showing the data. Can u please let me know what is the problem.
    when i checked using the Test Data service . It is showing the data. Then i have developed step by step, in between the time i use to run the application , it was showing the data. finally i have assigned to some role and user id. then also it is showing the data.
    Next day after i run the application , it is not  showing the data. displaying the message .
    "No Data Found".
    But when i run  the BAPI at the back end R/3 it is giving the data properly.
    Can u tell me what might be the problem
    REgards
    Vijay

    Hi Krishna,
    check the logs in the NWA. It seems that your connection is broken down sometimes, maybe a timeout. How many records does your data service return?
    Check it with external debugging of the BAPI, when you can reconstruct the error.
    Best Regards,
    Marcel

  • Calendar itmes not showing end date in list view/when opened

    Hi,
    Got a client with a very strange issue with meetings.
    Few of the meetings are not showing end date after accepting those although he can see all meetings in calendar.
    I have already checked below on his machine
    switched the month view to ''low detail'' then back to "high detail"
    Show end date is visible in views
    Reseted view options to default
    Strange thing which I have noticed during troubleshooting is that issue is happening with Exchange cached mode only and not in Online view.
    Client is using Windows 7 Enterprise with office 2010 on his machine.
    I hope someone can help here. Let me know if any further infomation is required.
    Thanks

    Outlook 2010 would read the local data in local email profile and the view setting is also stored in local configuration when someone runs it in cached mode.(Email profile in online mode would read the data from Exchange store directly)
    At this point, I recommand that we create a new profile to check if we could see the end date in Outlook calendar view.
    http://support.microsoft.com/kb/829918/en-us
    Tony Chen
    TechNet Community Support

  • Import option is not showing the Data Source created using ODBC

    Hi all,
    I'm new to OBIEE, just installed OBIEE 10g in my system with the help of some reply from this Forum (thanks to Kalyan for this).
    Now when I tried to create new rpd, the Import option is not showing the Data source I have created. I have created new Datasource in the SystemDSN tab of the ODBC Administrator window,I have tried this by creating the Datasource in the UserDNS tab as well.
    Mine is Windows 7 Ultimate. The new data source which I have created through the ODBC Administrator window is to connect to SQL 2008 (I'm trying to get some table from SQL 2008 database), I don't have Oracle data base.
    While creating the Data source ODBC Administrator is showing only two drives (SQL Server and SQL Server Native Client 10.0 ) , so I have created the Data source using the SQL Server Native Client 10.0 drive.
    Can some one help me to understand the issue and to solve it.
    Thanks,
    Mithun

    By calling your cellular data provider.

  • Query not showing complete data

    Hi,
    I faced this issue many times. Original query is not showing complete data but when I create a new query with same rows, columns and filters it gives correct data. Do anybody have any idea what can be the problem?

    Below is the checklist :
    1. Make sure you have same number of filters/ restrictions in both the queries.
    2. Make sure you are not using any authorisation object.
    3. Make sure the technical names of the objects you are using in the query are name.
    4. Make sure both the queries are on the same multiprovider.
    5. Make sure both are of same version.
    These are very basic things, I assume you must have done. But these are the only possibilities I could think of.
    If this is fine, then as suggested by Raman you can add one object each time in both the queries and test the output. You might get some clue.
    Thanks,

  • VLO6if will not show PGR Date in inbound delivery

    hi Gurus,
                VL06IF will not show the Post good receipt date of an inbound delivery,
    need this date inserted in the report.last column good recepit does not show any dates
    showing last column empty
    please check
    thanks,
    Joan

    Hi,
    Check Note 128150 - VL06: Designing your own display variants. It explains how to do with enhancement V50Q0001.
    I hope this helps you
    Regards,
    Eduardo

  • Team calendar  My trainings not showing any DATA  on Production Server

    Dear ALL,
    We are facing very critical issue on Production Server.
    We have two Id's for which Team calendar, My trainings is not showing any DATA .
    We observed that this is happening to both the users who had MSS role previously..
    now for your information we have check the following things already .
    1. RFC PT_ARQ_TEAMCALE_GET is showing DATA correctly .
    2. The authorization. Is correct..
    3. We got help from SAP..But not solved problem.
    Here we copied same data in the Quality system and the Team calendar, My trainings working fine ..
    I donu2019t know why Team calendar, My trainings is not showing any data in the Production system
    Let me know ASAP.

    Hi,
    All r correct in both system .............even following things i have checked .................which i got from reply from U.
    01.07.2009 - 11:29:52 UK - Reply by SAP
    Hello Pinki
    You need to check the settings in your different systems
    the #group of organizational views# MSS_LTV_EE is maintained
    for the Team Calendar and MSS_LEA_EE for the request mode.
    Check the IMG step
    Integration with Other mySAP.com Components ->
    Business Packages/Functional Packages -> Object and Data Provider
    -> Organizational Structure Views -> Group Organizational Structure vieMSS_LTV_EE (Team: Employee selection): the two organizational
    views MSS_LTV_EE_ALL and MSS_LTV_EE_DIR are assigned.
    MSS_LEA_EE (Leave Request: Employee Selection) the two
    organizational views MSS_LEA_EE_ALL and MSS_LEA_EE_DIR are assigned
    These organizational views are defined in IMG step #
    #define Organizational Structure views#:
    They have the following Object selections:
    MSS_LTV_EE_ALL: MSS_LTV_EE_ALL (All Employees)
    MSS_LTV_EE_DIR: MSS_LTV_EE_DIR (Team: Direct Reports)
    MSS_LEA_EE_ALL: MSS_LEA_EE_ALL (All Employees)
    MSS_LEA_EE_DIR: MSS_LEA_EE_DIR (Absence: Directly Subordinate Employees)Then you have to check the IMG step # Object
    Also check these
    Please use the evaluation path "ORGASS".
    To change the evaluation path kindly go to the view V_TWPC_V , look for
    the ESSDIR view and double click on the ESSDIR.
    Please check the above customisation,
    Tthe evaluation path SAP_MANG is used to determine
    the root objects. "Eval.Path for Root Objects" on the detail
    screen in the view V_TWPC_V "View Definition" for further information onthis topic).
    Also check the customisation using
    report RHSTRU00
    In view V_TWPC_VG, the view group PTESS of view ESSDIR with position
    01 should exist. Please correct it as well
    and ensure that
    In the View Cluster(T-Code SM34) VC_TWPC_ORGVWGRP there should be
    a record for the group 'ATTEND'.
    Hope this will help you.
    Best Regards,
    Siddharth Rajora
    HCM
    SAP LABS India

  • Bex report does not show loaded data at once

    Hi experts,
    Why Bex report does not show loaded data at once after loading is finished but after some time?
    Could be the reason of it:
    a) huge amount of data in infocube.
    b) there are no deleting/creating indexes before/after loading, because it takes too much time
    c) anothe reason?
    Thank you,
    Tigr_Z

    Hi Tigr,
    A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
    C - it can be resource issue, so please look into all and double check with basis if thats the case.
    Regards
    Sunny

  • Tables & Index not showing any data

    Hi All,
    I have done the db2 upgradtion from 9.1 to 9.7 with fix pack 4.I am unable to see table size after upgrade. I have checked all the sap collector job running fine.
    db02>history>tables& index not showing any data
    Regrads,
    Mnai

    Please make sure RSCOL00 running or execute it manually.
    Did you try to run the stats in DB13 ?

  • I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see t

    I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see the date. the sidebar no longer has the option for date. the most recent only shows the time.

    If you only see the time then that would mean that you see an entry of the current day (today).
    History items from past days should have the date as well in the Most Recent Visit column.
    You should be able to see this changing if you open the last 7 days folder and scroll down.

  • HT1386 MUSIC PURCHASED VIA IPHONE NOT SHOWING UP IN ITUNES

    MUSIC PURCHASED VIA IPHONE NOT SHOWING UP IN ITUNES
    why is 4.0.1 not in the list - I have 4.0.1 installed on this iPhone

    after i entered this post a similar post or a couple clicks ("inward") came up on the sidebar that answered it - no rply needed.

  • Sharepoint web analytics does not show any data

    Hello,
    We installed Sharepoint Web Analytics some days ago (separated application pool).
    Installation completed successfully.
    Search works fine and returns expected results.
    But reports still don't show any data :
    Data Last Updated: 15.08.2014 02:00:16 There is no data available for this report. Here are some possible reasons: (1) Web Analytics has not been enabled long enough to generate data; (2)
    There is insufficient data to generate this report; (3) Data logging required for this report might not be enabled; (4) Data aggregation might not be enabled at the level required for this report.
    What I tried :
    connect to website using different users (admin user included)
    checked that needed services on server are started (especially analytics services)
    restart services Web Analytics Data Processing Service and
    Web Analytics Web Service
    checked that all services applications are started (WSS_UsageApplication status was
    stopped so I started it using Sharepoint 2010 Management Shell)
    checked service application associations (especially if Analytics Service Application Proxy is checked)
    manual execution of jobs (Web Analytics Trigger Workflows Timer Job, Microsoft SharePoint Foundation Usage Data Import, Microsoft SharePoint Foundation Usage Data Processing)
    manual start of incremental crawling
    restart IIS
    checked scope of data logging (especially if Enable usage data collection and
    Enable health data collection are checked)
    checked that the .usage file are generated correctly on the disk
    checked in the Logging database (WSS_UsageApplication) that the
    RequestUsage view contains data collected from the .usage files
    checked that data is successfully extracted from the logging database into the staging database (LastLoggingExtractionTime)
    checked that data was successfully copied from the staging database to the reporting database (LastDataCopyTime)
    checked on the website side that Advanced Web Analytics feature is
    Active
    recreate web analytics application
    checked for any message in ULS logs that could help... I only noticed that error :
    The SharePoint Health Analyzer detected an error.  Drives are running out of free space.  Available drive space is less than twice the value of physical memory. Can it cause the problem ?
    All appears to work fine but I can't see any data in the reports.
    The thing is that Inventory data is collected successfully and I can see the related reports. Traffic and Search data are still empty.
    Anything else I can try ?
    Thanks.

    Yes I have granted application pool identity full control on the Web Analytics Service Application.
    I also checked that Sharepoint 2010 timer service is started.
    I can't see anything in the logs that could help, when accessing the reports. The only thing I noticed is this kind of log which occurs
    regularly and seems to be an exception :
    Enumerating all sites in SPWebApplication Name=SharePoint - 80.
    Site Enumeration Stack:
    at Microsoft.SharePoint.Administration.SPSiteCollection.get_Count()
    at Microsoft.SharePoint.Taxonomy.UpdateHiddenListJobDefinition.Execute(Guid targetInstanceId)
    at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
    at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
    Maybe it can be the cause ?
    I have also cleaned the drive where .usage file are generated so the error "Drives are running out of free space.  Available drive space is less than twice the value of physical memory." does not appear anymore.

Maybe you are looking for