SKYPE VIDEO APP THAT USES 3G AND WIFI

I would like to know if Verizon will now allow (as AT&T does) a Skype app that will use 3g and Wifi to make regular and video calls bypassing Verizon's network.  As I understand it, it just uses the 3g data or Wifi data (internet) network.  If Verizon wants to be competitive, they need to do this soon!  And with their 4g system coming, it should be even more possible.  Any ideas to get Verizon's attention?

Ann154 wrote:
crb79 wrote:
Don't confuse this with Skype on vzw phones.  This is SKYPE VIDEO that you are referring to.  
AT&T currently only allows video to video chat over wifi, they are going to allow it over 3G now.  The main downside is AT&T's network couldn't handle video to video over 3G during their own testing of their Facetime App.  So it's likely it will still be limited to wifi due to insane lag.
Skype mobile is still exclusive to the Verizon network.
I don't know what you are looking at, but I see two versions available.
http://www.droid-life.com/2010/10/05/skype-available-in-android-market-for-all-devices/
You're correct in that Skype now is open to all networks.  However the Skype Video is what the OP is referring to with At&t being over wifi.

Similar Messages

  • Can I cluster a web app that uses Spring and iBATIS?

    I have a web app that uses Spring and iBATIS. It runs great on a single server. I am now trying to get it to run in a cluster. I went through the code and made all the classes serializable. Also, I added the distributable tag to the web.xml. I then deployed it to two clustered app servers.
    When I logon and use the web app, everything goes well. Then, as a test, I determine which app server is being used and stop the web app on it. As I try to continue my session, the following exceptions are generated from the other node:
    java.lang.IllegalArgumentException: No SqlMapClient specified.
    The exception is being thrown from the Spring code. Is there something else I need to do to get Spring and iBatis to work in a clustered environment.
    Also, I see a lot of references to Terracotta as a clustering solution. Will Terracotta work with Oracle App Server?

    Thanks for the response.
    I think my session information is being shared. I've configured the default application in my OC4J configured for peer-to-peer clustering. Before I did this, if I shut down the instance I was using, it would fail-over to the other application server but my session would be gone and I would be forced to logon again. But once I was logged on, everything ran smoothly.

  • 3g drops every time i access an app that uses internet

    I have a verizon iphone 4, every time i access e-mail, safari browser, twitter, pretty much any app that uses internet 3g seems to just cut out. It comes back pretty much as soon as i quit whatever app i try to use but i cant get anything requireing internet to work unless i connect to wifi, any help would be much appreciated.

    sorry, I misunderstood your question somehow. I thought you were asking about the confirmation screen (not requiring a password) that you get when you first run an application that you got off internet.
    You can't get rid of the password prompts when you install things that require system changes. and that's a very good thing IMO. But you should be able to install most apps without a password if you are using an admin account. only apps that use installers and change some system files require passwords. apps installed by a drag and drop into /Applications don't.
    Message was edited by: V.K.

  • My ipod 5th gen says it is connected to the internet and i can go on apps that require an internet connection but whe i try to use the weather or another app that uses your current location it cant find me???

    My ipod 5th gen says it is connected to the internet and i can go on apps that require an internet connection but whe i try to use the weather or another app that uses your current location it cant find me???

    If you open the Maps app where does that say you are located?
    For location the iPod uses the location of nearby routers that are in Apple's database of routers and their location. Thus it appears that Apple's database is incorrect. You do not have to be connected to the router, just within range.
    Apple periodically updates their database based on information they obtain from iPhones, The iPhone has to have turned on the option to send info to Apple. no one has found another way to get the location of a router added/corrected.
    You can confirm that by going to well-know place with wifi like Starbucks or McDonalds                              

  • What's a good video app to use? I have iPhoto and iMovie, but they won't let me email a video. I also want to be able to make a dvd of my home movies. Any suggestions?

    What's a good video app to use? I have iPhoto and iMovie, but it these wont let me do certain things, such as email a video. I also want to be able to make a dvd of my home movies. Any suggestions?

    Unless you want a new computer, forget about AVCHD. It requires too much muscle to edit comfortably on anything but the fastest computer.
    What camera is nice, depends on your budget. Formats that are easy to edit are HDV, DVCProHD (P2) and XDCAM. In the consumer range you could look at the Canon HV40 or XH-A1s, in the prosumer range look at the Panasonic AG-HPX170, Canon XH-H1s, JVC GY-ND250 or Sony HVR Z5 or Z7 and all Sony XDCAM cameras, especially the EX1 and EX3. In the professional range look at the Sony PDW-F355 or upward.

  • Got M-Cell that gives 5 bars, got full-strenth wifi, Internet on phone doesn't work, any app that uses internet doesn't work, seems like its started when upgraded to 7.1.1

    I have an AT&T M-Cell that gives 5 bars, got full-strenth wifi. Same wi-fi that my computer uses, that my Kindle uses.  So not capacity issue. but my Internet on phone drops out continuously and frequently, any app that uses internet doesn't work at all. It seems like it started when I upgraded to 7.1.1  I have connectivity like crazy, so why doesn't the internet work?

    Reboot your router by powering it down for 30-60 seconds.

  • My iPhone 4s notified me that I had to manage my storage  so I deleted  apps that used a lot of space I deleted almost all my picture and it still keeps telling me  I don't have enough storage  is there any other way I can make room on my phone ?

    My iPhone 4s notified me that I had to manage my storage  so I deleted  apps that used a lot of space I deleted almost all my picture and it still keeps telling me  I don't have enough storage  is there any other way I can make room on my phone ?  Were it shows how much storage  I have available it still says 9.9 even after all that I have done so I don't know if I need to change my storage plan or what but anything will help I guess

    Check for 'others' in iTunes against your iPhone.
    Restore from a previous backup to reclaim some of it.
    Still want more, Restore in iTunes, setup as New.

  • "Connect to iTunes to Use Push Notifications" comes almost in every app that I open and it does not notify me when I got message in Whatsapp and Viber. Please help me to overcome it, it is becoming quite annoying!

    "Connect to iTunes to Use Push Notifications" comes almost in every app that I open and it does not notify me when I got message in Whatsapp and Viber. Please help me to overcome it, it is becoming quite annoying!

    Did you get any help on this? From what I can see from surfing this site, it's a BUG that no one has offered a solution to. It sometimes happens after a 'reset' and going to ITunes does not offer a way to 'set up push notifications'.

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
    Thanks!

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the online.

    Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the only one.

    Use the search feature and type in Flash and there are like thousands of posts on this.
    You seem to think you are addressing Apple with your post.  This is a user forum and we are all users just like you.

  • When i go to the app store to update the one app that needs to be updated, the screen is blank.  It used to list all the apps that need updating and have a button called update all.  Now nothing.  Just a blank screen.

    when i go to the app store to update the one app that needs to be updated, the screen is blank.  It used to list all the apps that need updating and have a button called update all.  Now nothing.  Just a blank screen.  How can I fix this?

    There's been a problem with this all day.  Seems to be a server problem  -  wait a day and try again, or use itunes on the computer to update, that works.

  • Is there a app that will tell all apps that are running and possibly how much battery power they use?

    Is there a app that will tell all apps that are running and possibly how much battery power they use?

    You don't need an app to do this.  Here's how you get the battery info.  Go to Settings>More>Battery. This will show you all the active apps and their individual battery usage.

  • I have V1 video app on my iPhone and on my iPad but can't get the videos to merge when backed up to the icloud.

    My V1 video app is use on my iPhone and iPad but I can not get them to merge when I back up to the iCloud. I want to be able to take the video of a swing with the iPhone and play it back on the iPad. What am I missing?

    do u have your ipad doing airplay because that could happen

  • Apps that  use SDK

    I'm thinking of buying an iPod Touch and have a few questions.
    A few years ago SDK showed a lot of promise for WiFi only devices.  Do almost all apps that use location use SDK today?
    Is there an app that lets one use the iPod as a navigator (like a Garmin NUVI) using SDK?

    SDK is Software Developer Kit. The iOS SDK shows/developers how to uses stock features/libraries in order to develop apps. It is not confined to location. See:
    https://developer.apple.com/devcenter/ios/index.action
    There are apps that allow using the iPod for navigation. However, since the iPod relies on the location of nearby wifi router that the iPod can see/show in Settings>Wifi, it is not useful unless you are near wifi routers.

  • Not able to recognize any video/audio devices using jmf and java soun

    Hi ,
    I need one help from your side.
    Here I am expecting some clarifications from you. Before that let you my environement.
    My working environment :
    Eclipse tool and added jmf jar to my project I did not do any thing more.
    If any thing I need to do just let me know. My target platform is MAC & UBUNTU.
    Please bare with my questions.
    1) I am not able to recognize any video/audio devices using jmf and java sound APIs on My system.
    ( I checked with the app mentioned in the http://www.java-forums.org/new-java/11201-jmf-cannot-connect-device.html )
    Do we need any administrives rights for our working PC.
    What is the procedure/ setup I need to follow from a java application to enable particular audio/video device since I dont about end-user system setup right.
    If possible send some sample code to recognize /r detect audio device ( voice input ). It should run on both MAC and UBUNTU.
    2) I run the one sample audio recording application of this link (http://www.jsresources.org/examples/SimpleAudioRecorder.java.html) which is provided by YOU.
    I got output audio file and able to hear voice on UBUNTU system but not able to hear voice on MAC system.
    I heared that default line in ( audio setup of the sys) is wont take any voice data on MAC.Why I made this stmt means we are getting false when using isSupported methods of JAVA SOUND API.
    ( like for TragetdataLine ...i,e, all ports are getting false)
    I have one sample audio recording app implemented by QUICKTIME API. In this case also he taking audio ftom device only using quicetime API.
    With that we are able to record and hear audio ( voice input --> not line in , external device we added some thing like SSB...)
    3) In case of Video capturing DataSource, Streams are implemented by PullBufferDataSource , PullBufferStream intefaces used.
    In case of Audio capturing DataSource, Streams are implemented by PushBufferDataSource, PushBufferStream intefaces used.
    Can you explain the reasons ? I gone through API but i am not clear.
    HOPE I WILL BE CLARIFIED EVERY THING FROM YOU.
    Thanks
    RamaRao.G

    Hi ,
    I need one help from your side.
    Here I am expecting some clarifications from you. Before that let you my environement.
    My working environment :
    Eclipse tool and added jmf jar to my project I did not do any thing more.
    If any thing I need to do just let me know. My target platform is MAC & UBUNTU.
    Please bare with my questions.
    1) I am not able to recognize any video/audio devices using jmf and java sound APIs on My system.
    ( I checked with the app mentioned in the http://www.java-forums.org/new-java/11201-jmf-cannot-connect-device.html )
    Do we need any administrives rights for our working PC.
    What is the procedure/ setup I need to follow from a java application to enable particular audio/video device since I dont about end-user system setup right.
    If possible send some sample code to recognize /r detect audio device ( voice input ). It should run on both MAC and UBUNTU.
    2) I run the one sample audio recording application of this link (http://www.jsresources.org/examples/SimpleAudioRecorder.java.html) which is provided by YOU.
    I got output audio file and able to hear voice on UBUNTU system but not able to hear voice on MAC system.
    I heared that default line in ( audio setup of the sys) is wont take any voice data on MAC.Why I made this stmt means we are getting false when using isSupported methods of JAVA SOUND API.
    ( like for TragetdataLine ...i,e, all ports are getting false)
    I have one sample audio recording app implemented by QUICKTIME API. In this case also he taking audio ftom device only using quicetime API.
    With that we are able to record and hear audio ( voice input --> not line in , external device we added some thing like SSB...)
    3) In case of Video capturing DataSource, Streams are implemented by PullBufferDataSource , PullBufferStream intefaces used.
    In case of Audio capturing DataSource, Streams are implemented by PushBufferDataSource, PushBufferStream intefaces used.
    Can you explain the reasons ? I gone through API but i am not clear.
    HOPE I WILL BE CLARIFIED EVERY THING FROM YOU.
    Thanks
    RamaRao.G

Maybe you are looking for