Skype video not supported on external lcd monitor

I would like to use the camera on my Apple LCD monitor with Skype, but video seems not to be supported.

Seeing as how Skype is not an Apple product, you might have a much better chance of an answer if you go to Skype for help.
Allan

Similar Messages

External LCD Monitor Connection - Unacceptable Quality

Hello,
I have recently purchased a Mac, hoping that I would be able to connect to my external LCD monitor (19" Samsung SyncMaster 920NW - only VGA connection).
I have easily hooked up my monitor to my Mac. However, what I see is of unacceptable quality. When compared to Macbook display, the display on the external monitor is darker and the text looks horrible. I have played with few settings but nothing good.
I have read other threads where people complain about similar things. But, I thought Samsung's monitors would be of higher quality. Mine is a relatively cheap LCD but not this cheap
I am just willing to confirm that I am not missing anything. I simply can't believe that the display quality could be this bad. In the worst case, I will have to buy a new LCD.
Many thanks in advance.

Hello stedman1,
Thank you for your quick reply.
Unfortunately, it is not running in the Mirror mode. The display with the mirror mode was even worse! But after reading the posts in the forum, I have learned how to change it to the extended display. It is better than the mirror mode, but still not good enough.
Maybe I am making a mistake comparing the external monitor with the MacBook's monitor?? There is a huge gap between the two. It is a lot darker, and the text quality is way worse.
Someone with a similar monitor having solved this issues?
Thanks,
Guven.

External LCD Monitor - Older MBP

I have an older Macbook Pro, 2.16 C2D. The Graphics Card in it is an ATI Radeon X1600. I want acquire an external LCD monitor and I want to get one that is at least 1920x1080. Will I be able to use an HD monitor with my MBP and will it still look normal? Thanks.

The very first MBP (CD 2.16) supported external monitors up to 2560x1600,(such as the Apple 30") psiforce. So does the C2D with ATI Mobility Radeon X1600. See http://www.everymac.com/systems/apple/macbook_pro/stats/macbook-pro-core-2-duo-2 .16-15-specs.html
Any of them can do little 22 & 24" 1920x1080 monitors with one hand tied behind their back!
Cheers
Rod

Quality of screen color flashes after connecting to external LCD monitor

After connecting my Powerbook G4 to an external LCD monitor via s-video, the quality of the image on the built-in screen flashes back and forth between what seems like a 8 or 16-bit image and a 32-bit image. I have run the hardware test and everything checks out fine but the image is grainy and washed out and only sometimes returns to normal. I have also reset PRAM and PMU to no effect, as well as tried recalibrating the display. And oddly, the external display is fine.
This is terribly frustrating as all colors are washed out and I can't truly gauge what I am doing design wise. Any help is greatly appreciated.
Thanks

Thank you, Silly Rabbit. I actually only hook the Powerbook up to the external monitor (LCD TV) to watch movies, show photos, etc. I don't actually use an external monitor on a daily basis.
Your suggestion is a good one, which I appreciate. I am going to the Genius Bar this afternoon, so hopefully they can provide a solution for the built-in screen.
Thanks again!

External LCD monitors with DVI PowerBook: Banding Issues

I have a DVI PB and would like to attach an external LCD monitor. I've looked at both Samsung 20 inch and ViewSonic 19 inch versions but whenever I attach them, I get "banding" around the edges of the external monitor. Tonight, I went to CompUSA to look at the Samsung 204B 20 inch. Taking my PB with me, I hooked up and set the resolution to 1600 x 1200 and the Samsung had huge, fat black banding all around the monitor. If you don't know - banding looks like a large, black border going around the screen. The sales guy pushed some auto-set buttons (which is said always work to remove the banding) but it didn't fix the issue. Any suggestions? Is there some secret that I'm not aware of on how to attach and use an external LCD monitor with the PB? One note: I did set the resolution down to 1280 x 1024, which worked fine to remove the banding but it monitor looked horrible. Not the best resolution for a large monitor.
Thanks,
B. Rose
TiBook 800 & iBook SE Mac OS X (10.4.6)

Hi, Bill. I can't speak to whatever happened with the Viewsonic monitor, since you didn't tell us about that, but it sounds as though the Samsung was in display mirroring mode rather than extended-desktop mode. The F7 key on your Powerbook's keyboard toggles an external monitor between the two modes. In mirror mode, the external monitor displays exactly the same thing as the built-in display. In extended-desktop mode, it functions as a separate portion of your desktop, and you can drag things (windows, icons) from one monitor onto the other. If you're going to use both displays, extended-desktop mode is probably what you'll want: why keep two copies of the same thing in front of you?
In mirrored mode, the fact that your Powerbook's display has a maximum resolution of 1280 x 854 means that only 1280 x 854 pixels of the external monitor can be used — leaving wide black borders of untapped pixels around the copy of your PB's display that's centered on the external monitor. In extended-desktop mode, the external display's native resolution of 1600 x 1200 can all be used, provided that your 32MB of VRAM is sufficient to drive the total of (1280 x 854) + (1600 x 1200) = 3,013,120 pixels, at the bit depth you've selected. (You might have to use the extended-desktop mode in Thousands of colors, rather than Millions.)
Another issue that comes into play with display mirroring is that the 4:3 aspect ratio of the 1600 x 1200 Samsung is different from the 3:2 aspect ratio of the Powerbook's display. If you set the Samsung's resolution to 1280 x 1024 to match the pixel width of the PB display, the top and bottom of the Samsung will be black bands, because the PB isn't manufacturing any pixels to fill those bands. And it will be blurry, because the Samsung has to interpolate to make 1600 pixels look (sort of) like 1280 pixels. Unlike a CRT display, the actual number of pixels in an LCD is fixed. When you change resolution settings on an LCD from its native (maximum) resolution to anything less, the image is always blurred. Only the native resolution can be really sharp.

Downloading SKYPE for Nokia E66 I get "skype is not supported...."

HiI have Nokia E66 which is supposed to support SKYPE according to SKYPE site...trying to download it I get the message that SKYPE is not supported on this devicecan you please assist?thanks

My problem is too. I got the message: Your is not supported *#0000#500.21.00902-06-2010RM-343C Nokia E66-1 (06) This is not the newest phone software, but there is never freezing. I use now the 1.5.0.12 skype version, i downloaded from the the Opera Mini, from Opera Mobile Store in 2011 summer (?). The Opera feel my phone type. Dear Developers!Please put the video call into Symbian Skype (for E66).Not only the Android and the iPhone live in the world. There is a lot of people still use Symbian (E51, E65, E66, E71, E72 - which have wifi and 3G/HSDPA)Now we write 2012 february. My next phone will Nokia E52 (Symbian again). I don't want use / change to Android or iPhone.Please, the new services and new options put this symbian softvare too, not only to android and iphone. Thanks!viktoriofrom Hungary

Connecting Powerbook to External LCD Monitor

The D-BUS port on the external LCD monitor is a female port, so is the VGA port of the DVI Adapter, How can I connect these 2 if both are female ports, what do I need???

Sounds like you need a VGA cable with male VGA plugs at both ends. Quite common, for VGA monitors that don't have hard-wired cables.

I have an apple hdmi adapter i am trying to use it with iphone4 it keeps saying cannot play video not supported??t

help i have an apple hdmi adapter trying to use it with my iphone4 when i plug it in and go to netflix it plays for a second then says cannot play video not supported???? please help im so frustrated!!!

Success!! There truly is a light at the end of the tunnel. Apple support really did come through and I am successfully back into my account. Ready to purchase more music. I followed the instructions, with patience I thought I lost, submitted my problem, someone emailed me back within two days and all is now perfect. Thanks again Apple.
To all the frustrated users out there, don't lose hope!!!

"Auth type not supported by External DB" error for web-auth SSIDs

Hello
We're having a problem with web-authentication on our 4404/WisM controllers since we moved to software rev 5.x (currently running 5.1.151.0).
With software rev 4.x our web-auth SSIDs would send the authentication requests to a Cisco ACS4.0 which would then authenticate the users against MS Active directory.
Now (with rev 5.x) the same SSIDs cannot authenticate users against AD, the error in the ACS is:
Auth type not supported by External DB
Found the following Cisco Doc regarding the problem: Cisco Secure ACS and Windows AD EAP/802.1x port authentication fails with the Auth type not supported by External DB error message - Case Number K24308566. Done a packet capture on ACS to see authentications coming in and the ones that fail with above error are using CHAP - from the Cisco documentation, MS AD doesn't support CHAP.
Any ideas on how I can get the web-auth working again with software rev 5.x ?
Thanks
Andy

my apologies - theres a setting under Controller - General for Web Radius Authentication. changed this from CHAP to PAP and its now working ok.

My external lcd monitor for my mac book screen wont turn on?

my external lcd monitor for my mac book screen wont turn on, it was working fine, I came home hooked up my laptop and the screens bounced back and forth a couple time. I got an error message saying my dashboard client had crashed, screen went black on monitor. Now when I plug it in my laptop doesent even recognize my external mac lcd monitor. It still charges the battery, Any suggestions????

Hi, what still charges the battery?
Does the Laptop's internal screen still work?

White dot (not dead pixel) on external LCD monitor.

Hi all,
I recently noticed a strange situation. I've owned a MacBook Pro 13" since October, and usually run it with an external Samsung T260 LCD monitor by MiniDP to DVI. I run the monitor at its full resolution of 1920x1200.
When I arrange the monitors so that the Samsung is on top of my MBP, there is a white dot about the size of a pixel approximately 3 inches from the left and 1/2 inch from the bottom of the screen. I thought it was a dead pixel, but when I move the external monitor to be on the left of the MBP, the white dot moves to 3 inches from the top and 1/2 inch from the right.
* The white dot does not appear when I arrange the monitors in any other configuration.
* The white dot appears when using MiniDP to VGA adapter as well.
* When I zoom using the modifer key+scroll method, the white dot grows bigger.
I've tried using the JScreenFix applet, but as I said, it doesn't look like a dead pixel.
Can anyone offer any other suggestions, that may involved poking around in the Video RAM space?
Thanks,
-Tony

Hi all,
Just returning to provide more information:
While playing around with my screen layouts, I found that the white dot is actually part of the menu bar graphic. I arranged my monitors and captured the screen to show the placement of the dot.
http://picasaweb.google.com/tonychung.ca/SonicTheme#5423207200689428946
I hope Apple is able to fix this in the next SW update.
Cheers,
-Tony

Video does not play on external plasma monitor

Forum
Here is my situation.
I received footage captured with a Panasonic HVX-200, the specs are:
29.97fps, Compressor: DVCPRO HD 720p 60, frame size: 960x720
I use an Intensity Pro video card for monitoring on a 42" Samsung LCD. When the Intensity Pro card is set to HDTV 720p 60 (1280x720) the video does not play on the LCD, all I get is a still frame. When the Intensity Pro card is set to Intensity NTSC 720x486, it plays on the LCD but it's not at its best quality. The footage always plays fine in the FCP Canvas and Viewer windows.
Any ideas on what may be going on?

YOu need to be using DVCPRO HD 720p60 8-bit 59.94...and whatever DECKLINK header that is there for the card. I use the Kona 3, so mine is AJA KONA DVCPRO HD 720p60 8-bit 59.94. 59.94 because no matter what frame rate you shoot, the video stream is a 59.94 stream to the monitor.
I hope that does it. No experience with the Intensity.
Shane

External LCD Monitor not detected

I've recently just bought a LED monitor and I've tried using the mini-display port to DVI cable and a DVI to VGA cable to connect to my macbook pro to my external LED monitor but it wasn't detected.
Anyone happen to know what the possible issue is? Is it the mini-display port or the DVI to VGA cable?

Hi texas-rangy,
If you're planning to format the laptop, the Operating System will simply roll back and it will reinstall the original Operating System which is Windows 8. Yes, you can still roll back to Windows 8 as long as the recovery partition is still accessible. This is also the last troubleshooting steps that we do to isolate if the issue if hardware or software. You may check the steps here: How to perform a System Recovery from outside of Windows. We suggest to backup all your important files within Windows and disregard the option Rescue Data on this process.
Once done formatting the unit, test your external monitor. If the monitor works then it is software issue. Proceed with the upgrade process. It is advisable to follow the steps of Upgrading the Operating System from Windows 8 to 8.1. Just follow the link. How do I upgrade from Windows 8 to Windows 8.1?
I know this is a long process but we need to consider every step and make sure that we did follow the correct procedures.
Hope these help.
Best regard,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

I have a Macbook Pro 13" and a 24" external lcd monitor go gray (lock-up)

If I plug my external monitor into my Macbook pro 13, via mini displayport, sometime durning the day, lately multiple times, the Mac and external monitor will go flat gray and "lock-up" only solution is to hold power button down and reboot. This problems seems to be happening more frequently. Yesterday I tried a test of not using the external monitor and the machine did not lock up once. I am speculating that the onboard graphics chip may be over-heating or something with the external monitor connected??? I will try a different external monitor and see if I get the same issue. Curious if anyone else has had this happen, thanks.

Hello ajaylamb,
Testing with another display would definitely be a great troubleshooting step. If you're using a display adapter, you may need to test with another adapter, as well.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

Tecra A2: Cannot use the 1680x1050 resolution on external LCD monitor

Hi All,
I need to make my Tecra A2 run at 1680x1050 at 60Hz for my new external VW222U LCD monitor which is connected to my port replicator.
I know the card (which is 82852/82855) can run at this resolution as when using the Intel Embedded drivers it works, just one has to give up all the little nice things when using the standard drivers, like monitor switching etc....
I have been discussing on many forums over at Intel's site why this resolution is not available by default, it appears that it is not a resolution enabled in the video BIOS which the display drivers read by default, so the vendor need to add it, the reason that the embedded drivers work, is that they don't read this directly from the video BIOS....
Thanks and regards,
Adam

Hi,
I know that issue, but we have to live with it because it seems that the graphics card vendors are giving some really "default" drivers to the notebook manufacturers.
I have an Satellite Pro S200 and I also use the Intel drivers from the Intel homepage. But my monitorswitching, etc.. works like a charm so maybe if you install the tools like the "FN-F5" etc.. it would probably work.
I would give it a try, otherwise: it is like it is.. :/
Greets

Skype video not supported on external lcd monitor

Similar Messages

Maybe you are looking for