Skype Wifi Does Not Connect

I'm currently in Melbourne at the Bell City hotel. I'm trying to connect to the Skype Wifi I am constantly prompted by. I have $16 in my account but I cannot get a connection. If I join the Bell City wifi point and then try to start Skype Wifi it says 'You're not connected'.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:                 
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

  • Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

    Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected.  Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices.  After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected.  Just can't seem to get it to generate an IP.  Any solutions other than turning it on and off again?  Not a Merry Christmas morning.

    Ok, so, a couple of things:  Denisefromwaleska and I have the exact same size/type/color iPod.  Now wishing I'd bought the black one maybe...
    Second, Airport is an Express and I have a second one that I carry with me when I travel.  Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem.  Updated firmware on my travel router, still could not connect to the internet.  Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod. 
    Thanks again for all your help, hopefully I can get a solution in place soon,

  • I bought my ipod touch from usa...and the wifi does not connect.does it have something to do with that its not from india?

    I bought my ipod touch from usa...and the wifi does not connect.does it have something to do with that its not from india?

    So you have tried connecting to open network that do not require a password and it was still unable to connect?  If that is the case.
    Does Wifi appear grayed out on your iPod via Settings -> Wi-fi?
    Have you seen this article yet?
    http://support.apple.com/kb/TS1398
    B-rock

  • WiFi does not connect whilst Time Machine backup occurs at startup

    This is a problem I've had since the beta test session and does not seem to have been fixed.
    If I shut down the computer in the middle of a backup or a backup strats immediately on opening the lid of my computer (MBA late 2010), the WiFi does not connect. If I am patient, eventually the backup will terminate and I can then connect. My router is a Time Capsule, and all software is up to date.
    I don't recall having this problem with Snow Leopard.

    You can't - once posted in a particular discussions area, that is where it remains - unless a moderator moves it to the appropriate area, or a more appropriate area.
    You start here, and then narrow your choice down to the appropriate discussions area.
    http://discussions.apple.com/index.jspa?categoryID=1
    Since you are running Leopard, go to the Mac OS X v10.5 Leopard area, and below this category is a Time Machine discussions area.
    http://discussions.apple.com/category.jspa?categoryID=235

  • Helix Wifi does not connect to wifi when 3g is connected

    This might be strange. Since the latest update of wifi drivers (dec 2013) the wifi does not automatically connect if there is a 3G connection. So 3G Connects automatically and wifi does not.
    If I then conect to both, 3G still has preference over wifi. This should be the other way round.
    May be this is a generic Windows 8.1 issue?
    Thanks,
    Ruud

    Connect the Modem to the router on the Internet Port and the computer to the Router on the Ethernet Port...reset the router for 30 seconds,power cycle the router and then,try to open the setup page by typing 192.168.1.1 in the address bar.
    If your Internet Service Provider is Cable follow this link
    If your Internet Service Provider is DSL follow this link

  • Ipad wifi does not connect after upgrading firmware to 3.2.2

    So many posts and replies on connection to wifi with iPad not working... My issue is that everyhing worked perfect a home until i upgraded firmware to latest (3.2.2?). Now it connects and disconnects in second intervals ??!!
    no changes has been made to my router and my two macs connect as before, only iPad does not
    Very frustrating indeed, so any tips on what i should do?
    Cheers in advance

    krannisto wrote:
    So many posts and replies on connection to wifi with iPad not working...
    You may already have seen these suggestions, but in case you haven't:
    _Pad: Troubleshooting Wi-Fi networks and connections_
    ...from here:
    http://www.apple.com/support/ipad/wifi
    And every iPad comes with complimentary telephone technical support for 90 days:
    http://www.apple.com/support/contact/phone_contacts.html
    _iPad Service: Frequently Asked Questions_

  • After updating to iOS-6 WiFi does not connect automatically.

    After installing the new operating system, I noticed that my iPhone 4S does not automatically reconnect to my WiFi at home.
    I have to manually connect it each time.
    Anybody notice this?
    Any patch?
    Marco

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    http://support.apple.com/kb/TS3694#error1604

  • Wifi does not connect automatically after sleep

    Since installing Yosemite on my Mid 2011 iMac - when my computer wakes from sleep mode, it does not automatically connect to the wifi.  I have to select the network to join from the top menu bar.  Is there anyway to make it connect automatically like it use to?  Thanks for any and all help!

    Hello ffmed124,
    The steps detailed below can help get your iMac to reconnect to your Wi-Fi network automatically after waking from sleep.
    Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
    Choose System Preferences from the Apple menu.
    Choose Network from the View menu.
    Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
    Click the TCP/IP tab from the top of the screen.
    Click the "Renew DHCP lease" button.
    Select the Wi-Fi tab and view your Preferred Networks list.
    Select each network and click the minus (-) sign to remove those networks from your Preferred Networks list.
    Click OK and close the Network preferences.
    Remove your stored network passwords using the Keychain Access Utility. 
    Open Keychain Access from /Applications/Utilities. Your window will look like this:
    Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
    Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
    Restart your computer.
    Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Cheers,
    Allen

  • Tx wifi does not connect

    Help:  Please tell me how to manually setup the tx.  There was a moderator post to that end.  My router is set correctly.Tx does not recognize home wifi network
    Post relates to: Palm TX

    Page 263 of the User Manual for the TX explains how to set up a Wifi connection.  The sticky post I made is still at the top of this section.
    You have the User Manual on your Installation Disk also.
    Read through the Wifi Checklist post above, and the User manual.  If still no joy, tell us what your router settings are and we'll try to find the solution.
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • My wifi does not connect

    My WIFi is working on my IPOD but when I got my new Ipad IT will not connect. What is wrong

    http://support.apple.com/kb/ts1398

  • Ios 6- wifi does not connect

    hi,
    My iphone 5 with ios 6.01 doesn't connect to my office wifi network. My office wifi network requires us to authenticate our login via a pop up browser which is not happening now
    Earlier, moment I connect to office wifi pop up webpage would pop where I would provide login credentials and connect
    Now nothing
    thanks
    Gangy

    Mine worked after doing step 4;
    Reset Network Settings, by tapping Settings > General > Reset > Reset Network Settings

  • Wifi does not connect

    wifi just keeps loading and loading....
    every other phone works on the network?

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Wifi does not connect to preferred network

    I have two wireless networks, an Apple network and one provided by my broadband supplier Virgin. The base stations are located in different parts of the house.  My Macbook Pro will persist in connecting to the Apple network even when it is located in the same room as the Virgin wireless hub max signal strength and the Apple signal strength is minimal.  Even if I then select the Virgin network the Mac decides that it still wants to connect to the Apple network and will switch back again at some point.  I have put the Apple network to the bottom of the list of network connections and Virgin at the top to no effect.  I have tried deleting it in the Advanced Preferences again with no success.
    My Mac has a mind of its own.  Any suggestions?

    I have two wireless networks, an Apple network and one provided by my broadband supplier Virgin. The base stations are located in different parts of the house.  My Macbook Pro will persist in connecting to the Apple network even when it is located in the same room as the Virgin wireless hub max signal strength and the Apple signal strength is minimal.  Even if I then select the Virgin network the Mac decides that it still wants to connect to the Apple network and will switch back again at some point.  I have put the Apple network to the bottom of the list of network connections and Virgin at the top to no effect.  I have tried deleting it in the Advanced Preferences again with no success.
    My Mac has a mind of its own.  Any suggestions?

  • Umm wifi does not work on laptop since getting it back from support

    okay i bought my mother a dr beats hp laptop .. the fan inside for the cpu broke so we shipped to support got it back .. and the wifi does not connect to the laptop now i spent like 5 hrs today trying to get it to work nothing ... do you guys often mess up computers more after sending them to get fixxed?!?!!? searching the product that i bought only shows up bios and other system functions but none of them really work .. laptop is slow as fucing **bleep** now like holy **bleep** 

    the dlink router i have does not have any drivers cept for the firmware which is installed directly onto the router it self..i dont think you seem to understand that since i got it back from support/warranty work they wiped the harddrive and copy pasted everything but messed the f' up .. like ive been trying to get this laptop to work for the last 2 f'n weeks im about to f'n destory a hammer .. pos     DIR-890L HW:A1 FW:1.07

  • How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

    How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

    Did you already try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data.
    If this does not work, try to reset the network settings in Settings/General/Reset. After that you'll have to put in the passwords for all known networks again.
    More troubleshooting can be found here:
    iOS: Troubleshooting Wi-Fi networks and connections

Maybe you are looking for

  • 2 things I don't see in Safari 5.1 that are essential to my browsing.

    2 things I don't see in Safari 5.1 that are essential to my browsing. 1) Where is the close button on the tabs? I have to use the command-w now! 2) Where is the show status? You know, when you mouseOver a link, it shows a preview of the link at the b

  • Why does Mavericks not allow the "poster" option in Adobe Acrobat anymore?

    I'm trying to print "poster" style (i.e. tiled/100% size over multiple pages) in Adobe Acrobat. Everything else in the program works, but that is greyed out.  Is there a workaround? Do I just have to wait for an update from Apple or Adobe? 

  • User Specific Layout for KSB1

    Hi Gurus, User has created a variant for KSB1 report and its saved as user specific variant automatically.  Now he want to change this as global in order to access for other users but user specific check box not able to deactivate as its greyed out(n

  • I need help in class method

    hello java lovers, i'm new here and the reson i joined is to learn some java :) well my problem is that i ws given as assignment but i can't do it :( i'm having a tones of errors :( the question is: Write an object-oriented program to fulfill the fol

  • Objects as links - URLs not working

    iWeb '06 I'm using a map of our subdivision and I want to link each lot to the county's property information for the specific lot. I have created an object (a clear rectangle) over each lot. The url is a search criteria and the only difference is the