Skype will not allow me to log in with my macbook pro os 10.5.8

i have macbook pro, trying to log in to skype, I have updated quicktime.  I can not log in to skype.  When the application

You posted your question in the Powerbook discussion. You may want to post it in the MBP discussions at https://discussions.apple.com/community/notebooks/macbook_pro

Similar Messages

  • Wife's Mac Book Pro locked up will not allow her to log on, it froze up on her so she did a hard shut down by holding power button until it shut down.  Will power up but not allow her to log in on the log in screen.  Any suggestions?

    Wife's Mac Book Pro locked up.  She shut it down by holding power button unitl it shut down,  when she powers it up now it will not allow her to log in on the log in screen.  Any suggestions?

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • HT4623 Downloaded new IOS, but it will not allow me to log into iCloud, no matter how many times I reset my password. Please help.

    I downloaded the new IOS, but it will not allow me to log into iCloud. I even tried resetting my password, but it does not recognize me. Please help. Thanks.

    I'm having the same issue.  I went through the apple website to reset my password, and it was no problem, even let me update my email address and apple id, but my iphone is still not accepting what I know the password is, so I can't delete it, or change the apple id information.

  • My MacBook Pro will not allow me to log in at the user screen. It sits frozen and will not prompt me to input my password.

    My MacBook Pro will not allow me to log in at the user screen. It sits frozen and will not prompt me to input my password.

    If the normal restart doesn't work, and you restart on the recovery hard drive, from the choices of things to do window that appears, select Terminal, and in the Terminal window type: resetpassword and then press enter.  You will have a window with the users to choose from to reset the password.  Select the one you want and you will be able to reset the password, double entry of course.

  • My screen will not allow me to log in " User profile servc failed the log "

    my screen will not allow me to log in it states " User profile servce failed the log in. User profile can not load"
    This question was solved.
    View Solution.

    Hi,
    You could try the following.
    Shut down the notebook.  Tap away at f8 as you start the notebook to enter Windows Recovery Console.  Use the arrow keys to select Safe Mode and hit enter.  If windows will load in this mode, from the Start Menu, click All Programs, click Accessories, click System Tools and launch System Restore.  Pick a restore point at least 24 hours before the log-on issue and then proceed with the restore process.  When complete, Windows will reboot as normal so check if you can now log in correctly.
    Another option if the above does not help is as follows.
    Shut down the notebook.  Tap away at f8 as you start the notebook to enter Windows Recovery Console.  Use the arrow keys to select 'Start Using Last Known Good Configuration' and hit enter.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My ipod touch 4th gen. will not allow me to adjust volume with my speaker, but will with headphones. How do i fix this?

    My ipod touch 4th gen. will not allow me to adjust volume with my speaker, but will with headphones. How do i fix this?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem
    Apple Retail Store - Genius Bar

  • My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    Hey there mbarikiwa,
    If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
    OS X Yosemite: If a USB device isn’t working
    If the device is connected to a USB hub: 
    Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on. 
    If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord: 
    Try plugging the device directly into your computer’s USB port  or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding. 
    If you have many devices connected to your Mac: 
    Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps. 
    Verify that the device appears in System Information: 
    Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information. 
    In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps. 
    Restart apps: 
    Quit and restart any apps that use the device. 
    Restart your Mac: 
    Choose Apple menu > Restart.
    Check your device’s USB connection
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I have a macbook pro in front of me that will not accept its new os, I have a macbook pro in front of me that will not accept its new os

    I folks please help we have a grey screen issue here it will not allow me to re install the OS it does not appear to allow itself to get back on line to verify itself it's little legs are up in the air, just begging for the crusher!

    What model MBP do you have? What OS are you trying to install? And, from where?

  • HT1338 FaceTime is not recognizing my Apple ID and will not allow me to log in.

    I tried to make a FaceTime call via my MacBook Pro. For some reason I was not already logged in and ready to accept or make a call. It asked me for my Apple ID info, which I provided and all it keeps telling me is that I cannot verify my Apple ID and to create a new account. My FaceTime account via my iPhone 4S is fine. Anyone have any ideas on what to do or what the cause is?
    Thanks in advance!

    http://www.apple.com/support/icloud/systemstatus/
    iCloud: iMessage - Users Affected: Some
    11/18/2012 13:34 PSTUsers are unable to use iMessage. Normal service will be restored ASAP.
    iCloud: FaceTime - Users Affected: Some
    11/18/2012 13:33 PSTUsers may be unable to place FaceTime calls. Normal service will be restored ASAP.
    All other services are online and fully operational.
    Last Updated: 11/18/2012 13:39 PST

  • HT4889 Transferred files via time machine and not log in password will not allow me to log in

    I have a new MacBook pro, I transferred files via time machine and a removable hard drive. Now new MacBook does not recognize the log in password. What can I do to reset the password?

    Did you migrate when you first booted up in Setup Assistant or did you migrate later? When you migrate later it can create a second account, check in Mac HD/Users to see if this is the situation.

  • My MacBook Air will not allow me to update Iphoto with my Password to ITunes. What do I do?

    I cannot get updates for IPhoto on the latest OS on my MacBook air when using my Itunes password. I just loaded a OS update  with no problem using my password but it will not upgrade IPhoto. I have photos on my 5s that I want to get on my MacBook Air. How should I do that? It works fine on my clone running windows 7?

    Sign out of the App Store and then sign back in with your ID and pasword. Then try again.
    OT

  • I Chat will not start for the first time on my Macbook Pro after Migration

    Hi hope someone can help as this problem has stumped me. I cannot get ICHAT to even start having migrated all applications via Migration Assistant from a Macbook to a Macbook Pro. Everything else seems to work fine except when I run ICHAT and follow setup I get to a final screen which locks without showing a DONE button to complete the setup process! I have reloaded OS X, downloaded the OS X Combo OSand tried that, deleted the app and started again just in case but to no avail. Can anyone help? The application worked fine on the old Macbook but not on this machine.

    Hi,
    Welcome to the    Discussions
    Please tells us which version of iChat was moved to the new computer ?
    What OS is the new computer at otherwise ?
    I would guess you will have to do th Hard way
    http://discussions.apple.com/thread.jspa?threadID=1486891&tstart=0
    and include the Support folders in any Reinstall
    Please note the Post time I add to my post as it may be some time before I post again.
    10:58 PM Wednesday; September 2, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Since the last update my Numbers app in IOS, iPad3 and iphone5 will not open.  It works fine on my macbook pro.  It starts but before I can open a file it closes.

    Since the last update my Numbers app will not load in either my iPad3 or my iPhone5.  It works fine on my MacBook Pro.  The app starts but before I can open a file it closes.  Is this a common problem and do you know hwo to solve it?

    Hi Michael,
    If you've already restarted both your iOS devices after the update and Numbers for iOS still won't load, you might try clearing the documents temporarily out of iCloud, opening the apps, closing them, and then placing the documents back in iCloud.
    To do this, in Finder on your Mac, hold down the option key and then Go > Library > Mobile Documents > com~apple~Numbers.  Move the documents there out to the Desktop or other location of your choosing.  Then give iCloud time to sync.  Then try opening Numbers on iPad and on the iPhone.  If they open, then close them, and move the documents back into  Library > Mobile Documents > com~apple~Numbers and let iCloud sync again.
    That sometimes clears up the problem.
    SG

  • ITunes will NOT back up my iPhone 4 on my MacBook Pro???

    I am running iTunes (10.5.2) on my MacBook Pro (10.7.2). I keep trying to backup my iPhone (5.0.1), but it will NOT let me???? It begins the syncing, but will not complete it to backup my files??? I just got my Pro a week ago, but I was running the same iTunes software and iPhone software on my PC and it worked fine??? Am I doing something wrong?

    I did a complete restore. Spent days reorganizing my phone, made 1 backup and now I get the same error message, "cannot backup iPhone because an error occured" I give up. It's not fixable.. I guess I just have to hope that I never need to restore because all I have is that one backup.
    I have tried 3 differnet Macs, three different cables.. same error so it MUST be the iphone 4S. I also have the latest iOS 6.1.3 and iTunes 11.0.2
    What is wrong with Apple these days??? What happened to "it just works"??

  • I use web mail from lotus notes and need Firefox to connect with my MacBook Pro. Since updating to version four I no longer have the ability to see or open attachements. What I am doing wrong?

    I updated my MacBook Pro with version 4 yesterday. I access my company's lotus notes with this browser. I can access the web site, but cannot open attachments. The message I received is that I have removed the attachment. I haven't. The text that states the name of the attachment is there. I can click on it but it won't open and there is nothing in the attachment box in Web Mail.

    Try the "light mode". Surprise :)

Maybe you are looking for

  • URI to a track within a particular playlist?

    I can get the URI for a track, no problem.I can get the URI for a playlist, no problem.But I can't in the general case figure out how to get the URI for a track that's in the context of a particular playlist.  I'd like to be able to start my player a

  • Patch p11879896_112020_Generic failed with req comp missing error

    Hi, Applying the subject patch on Linux 32 with opatch apply -invPtrLoc /u01/app/oraInventory/oraInst.loc failed (with the message Patch 11879896: Required component(s) missing : [ oracle.sysman.console.db, 11.2.0.2.0 ] ), the debug follows below. An

  • System.log filling with error messages

    After SL update my system.log if filling with error messages. Does any process delete the system.log periodically? What's causing this error? Getting thousands of them. 9/30/09 12:08:13 PM [0x0-0x12012].com.nowsoftware.nowxagent[181] at now.swing.NPr

  • Lion always starts in recovery mode

    I installed Lion a couple of weeks ago, and it's worked pretty much fine, with one major problem. Whenever I start the machine, it has now begun to boot up in recovery mode, as though I were holding down command-R. I then re-start, and it starts norm

  • Is Adobe service supported on R3 4.7 ?

    Hi guys, Is Adobe service supported on R3 4.7 ?  Is there a notes to declare about this ? Best Regards, Louis Chen