SL does't appear in Win Xp Workgroup

Hi, I have a problem with smb files sharing in my Wlan.
I have a workgroup made in windows xp, i can see it in System Preferences>Network>Advanced>Wins so I'm sure the mac is in the same group. In finder I see the pc and I can access to it by entering username and password, but in windows i don't see my mac. The smb protocol is checked.
What can I do?

Hi!
Have you enabled the option that Toshiba Power Saver will be showed in taskbar? You can enable or disable if you start Power Saver and go to setup options.
Set the option Display [TOSHIBA Power Saver icon in the notification to enable.
And what exact error message do you get?
Maybe you should reinstall Power Saver again. Therefore remove the old version first, use CCleaner to clean the registry and then install the new version.
Bye

Similar Messages

Airport BaseStation's name does not appear in list of workgroup's members

I have a windows workgroup called NUCFAM with two PCs running XP Pro in it.
I have replaced my linksys router with an Airport Extreme Base Station to which I have attached two printers and a disk. I have configured the AEBS to have the Airport Extreme name "celery" and I have configured the AEBS to be in the workgroup NUCFAM by using the Airport Utility>Disks>File Sharing panel.
On Windows, where I have installed BonJour, each of my printers is listed as located at celery in the printer's properties.
However, in Windows Explore>Tools>Map Network Drive if I click the Browse button
a dialog appears that lists, under a node labeled NUCFAM, the names of my two PCs but not the name of the AEBS, i.e. celery. Instead the AEBS is named by the same twelve hex digits that Airport Utility lists as its Ethernet ID.
And in a CMD shell
net view \ \celery
fails to find the network path. However,
net use \ \10.0.1.1
does find the AEBS and lists the disk's name.
Can I get the AEBS to appear on the Windows side with the AEBS's name?
Thanks.

I just found the answer on the discussion board.
In my SETTINGS I had compilations turned on.
When I switched it off, Carly Simon was back in my
ARTISTS list.

I am using 10.6.8 and I cannot get an Imac to appear in workgroup manager, the mac is bound to both AD and OD. I have removed the bindings, rebuilt the mac and also removed it from bot system but still it does not appear in OD in work group manager.

I have a mac which is connected to a network and is bound to both OD and AD with no issues on my server when I try to manage it through Workgroup manager it does not appear.
I have unbound it , removed it from both systems completely and even rebuilt it but it still does not appear in WGM.

If your server is 10.6 and your client is 10.7 you'll have to add it manually to WGM
via mac address. 10.7 clients don"t automatically appear in 10.6 server wgm

TS3147 I seem to have lost fax capability with Snow Leopard. Does not appear in Print as before. Cant find fax in system Preferences. No drivers for fax found Bob Wines.

I seem to have lost fax capability with Snow Leopard.
Does not appear in Print as before. Cant find fax in System Preferences. No drivers for fax found.
Initially said it was downloading software but no longer does this. Fax test works on HP site.
Using HPC410aHP Photosmart Premium
Any help would be appreciated.
Bob Wines.

Thanks for your detailled description of the faxmodem installation!
I've tried this with Mac OS X v10.8 Mountain Lion and it works fine.
I've to type "cupsctl WebInterface=yes" in terminal to see the interface.
Does anybody know, if send faxes are saved somewhere?

Yahoo toolbar appeared without my consent. Can't get rid of it. Does not appear in list of add-ons or in list of programs installed for uninstall. (Win7; FFx5) Please help me delete this annoyance.)

I was prompted to update Java. I got a YAHOO toolbar which I did and do not want. I can't get rid of it. It does not appear on the Add-on list, not in the programs list (to uninstall). Can't find anything with Yahoo in the name. I do not want to use View, because it keeps coming back into view without my consent -- I want it gone permanently.
The uninstall directions in Yahoo help call for click on pencil tool (which tool is not found on this toolbar). Firefox instructions say go to Add-on list, but the Yahoo bar is not there. There are several Java add-ons, but I don't know what they are and what happens if they are uninstalled.
Win 7; Firefox 5.0; Yahoo toolbar ver 2.3.8.20110620112826
Perhaps it is disguised as something else. If so please tell me what to uninstall.

Try RIGHT clicking on different areas of the toolbars on Firefox, mainly try right clicking on/around the url bar & forward/back navigation buttons. When you get the correct spot if will give you a menu with the toolbars available (whether or not they're active) and a couple other options. Just uncheck the Yahoo one & you should be all set.
As you say though it may be some other bar disguised as a yahoo bar. Any chance you can get a screen shot of it & post it here?

Fire FTP does not appear in the Firefox 4 Tools Menu, where is it?

I have just upgraded Firefox from 3.6.16 to Firefox 4
(OS Win XP)
I had Fire FTP as an add on, but after upgrading it disappeared from the Tools Menu (along with all my accounts details)
I then re installed the Fire FTP Add On but it does not appear in the Tools Menu, where has it gone?
Firefox 4 appears to have reinstalled previously removed Extensions/Add ons
The Tools Menu doesnt have anything in it.
How can I roll back from Firefox 4

To clarify Afallach's reply, the FireFTP menu is now under '''Tools->Web Developer->FireFTP.'''
I don't know why the development team chose to move it there, but they've been making a lot of stupid design decisions recently.

Essbase server does no appear in Shared Services

Hi All,
I've installed and set an EPM 11.1.2.2 environment under Win 2008 server with Oracle 11g database. I've installed and configurated Essbase Server, EAS, Essbase Stdudio, APS and EIS. But when I open up shared services the Analytic Server does not appear in Application Group and into EAS I'm getting :
Error: 104: Invalid user name or password
Error: 1051012: User native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER does not exist
I know the second error is because the admin user is not provided to the Essbase server, but it does no appear there.
Does someone could help me on that ?
Thanks

John -
Obviously several months later now, but just want to say thank you as well - I was having the exact same issue as the original poster (Essbase Server missing from Shared Services, credential error from EAS, etc). Your solution worked perfectly for me as well. That you for this solution.
John W.

Where is the direct download page for Ps CC? CC webpage will not download and install the app. Ps CC does not appear in CC Desktop.

Win 7 Home Premium. Photoshop CC was crashing constantly and some features would not work properly. I uninstalled and now cannot get it to reinstall from the CC Website, Photoshop CC does not appear in the CC Desktop app. In the past I have been directed to a page where I could directly access the download, but I cannot find that page.

ShowLowAZ please try utilizing a different web browser. As an alternative please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to install directly from the Creative Cloud Desktop application.

Firefox menu bar appears- file/edit/history etc but the actual page with the search bar does not appear and is blank

when clicking firefox icon to open the internet, all that appears are the options along the top of the page. the rest of the screen does not appear revealing the desktop picture. The firefox page with the search bar does not appear.
http://imageshack.us/photo/my-images/214/screenshot20120303at155.png/

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Smart object does not appear at specified time in slide.

Here's my issue: When I insert a speech bubble into the slide, set it to appear after 5.0 seconds and the display for the rest of the slide, it does not appear at the specified time. HOWEVER, if I move the speech bubble to appear at the very START of the slide, then it appears. I thought perhaps I needed to add an effect to make it work, so I selected the thought bubble, then added a "fly in" effect and set the time. It still won't appear at a specified time--only if I put it at the start of the slide.
Here's my question: Why won't the smart object (speech bubble) appear at a specified time, but it WILL appear if I set the "appear after" time to 0 seconds? I also have tried moving this on the timeline, and it still only shows at the start of the slide.
Many thanks for any help.

Previewed in browser and in normal preview mode. (Just clicking "preview from this slide).
Normal project -- not responsive.
And..I'm not worried. No need for wine. (Although I've never been known to refuse one if someone offers. )
Screenshots below. As you can see, the image is not set sa a button.
And, yes: I know there is a spelling error in the thought bubble. Just trying to get it to work first.
I think there may be a bug in the system, as I have noticed other weird things. (EG: The time indicators under "timeline" often disappear for no reason. I have to close out and re-lauch Captivate to get it back. (Clicking on "timeline" in Windows dropdown does nothing to correct the issue. Other things I've noticed is that the navigation works fine when I play the whole project through ONCE, but upon a second preview, all settings -- such as "jump to slide __" -- do not stick. When I go back in and re-enter all of the navigation slide commands, the same thing happens when I replay it. My client notices the same thing. Bizarre.)

7510 does not appear in control panel

HP Photosmart 7510, WIN 7, 64bit. No other changes. HP Pavilion dv4.
Installed with CD. Printer connected to netowrk just fine, everything indicates it installed correctly. Won't print from PC. Printer does not appear in control panel.
Tried reinstall, with same issue.

Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Blade 6000 ILOM web ui does not appear correctly in firefox 7

Cannot see correctly ILOM web ui nor in firefox 7 (Win or Linux) nor in IE9.
In other words any control (f.e., Remote Power Control) and any info (f.e., System monitoring/Indicators) does not appear in the frames.
Firefox 3.6 works fine.
I've upgraded ILOM to ILOM-3_0_12_11_a-Sun_Blade_6000 ant got the same result.
May be anybody have already faced with the issue?

if you have ILOM 3.0 then consider these ;
TABLE: Supported Web Browsers
Operating System Web Browser
Oracle Solaris (9 and 10) • Mozilla 1.4 and 1.7
• Firefox 1.x and later
Linux (Red Hat, SuSE, Ubuntu, Oracle) • Mozilla 1.x and later
• Firefox 1.x and later
• Opera 6.x and later
Microsoft Windows (98, 2000, XP, Vista) • Internet Explorer 5.5, 6.x, and 7.x
• Mozilla 1.x and later
• Firefox 1.x and later
• Opera 6.x and later
Macintosh (OSX v10.1 and above) • Internet Explorer 5.2
• Mozilla 1.x and later
• Firefox 1.x and
and remember to check JRE , to run the Oracle ILOM Remote Console, you must
have the Java 1.5 Runtime Environment (JRE 1.5) or later version of the JRE software
installed on your local client.

I am trying to set up Sharing amongst several computers on my home network. I have followed all the setup instructions but after completion Sharing does not appear in my iTunes window (on any of the computers I've set up). There is no explanation why.

I have been trying to set up Sharing between two computers on my network. I did this once and it worked. However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer). There is no explanation as to why not. Is this a configuration problem, a network problem or what? Can it be fixed? I have tried turning sharing off and back on on both computers but to no avail. What am I missing? Thanks for any help you can provide.

Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M.

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

BPM Application Link does not appear in BPM Workspace (11.1.1.7)

I spent huge amount of time to reveal why does that happens.
All that follows further is valid for BPM Suite 11.1.1.7.
The scenario.
You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
But the application link did not appear in BPM Workspace.
Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
Else the Appication Link will not appear.
One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
The second find is a bug (is think so).
If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
If you look to organization.xml you will see something like this:
        <ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
            <ns5:name>StartTask.InitRole1</ns5:name>
            <ns1:processRole id="InitRole" name="InitRole1"/>
        </ns1:applicationRole>
The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
After that "applicationRole id" != "applicationRole name" and the Link does not appear.
How to fix?
Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
In that case the associated swimlane will have the same name as the "applicationRole id".
Hope this helps somebody
Oleg

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

SL does't appear in Win Xp Workgroup

Similar Messages

Maybe you are looking for