SL doesn't boot after unsuccessful installation
Hello,
I wanted to upgrade to SL, but after 10 minutes of installation there was only a black screen. After 15 minutes i shut it down and tried to reboot.
The system didn't boot SL, after displaying the apple for 5 minutes the screen went black again. So i decided to boot from dvd. But the same error occured again. I can't even see the harddrive after pressing ALT, there is just the sign of the DVD and the Windows partition, which still can boot.
trying to boot osx: (last two lines)
"BootCacheControl: could not unlink playlist /var/db/BootCache.playlist: Unknown error: -1
Bug: launchctl.c :2325 (23930):30: (dbfd = open(gjob_overrides_dbpath; 0_RDONLY | 0_EXLOCK | 0_CREAT, S_IRUSR | S_IWUSR)) != -1
after 2 minutes it displays more, bit shuts down too fast to read it.
Does somebody have a solution? I really need a running OS as fast as can. Thank you!
Hi there again, thank you, but the problem was totally different
When i tried to boot for the 7th or 8th time, i turned on the light of my very bright anglepoise lamp and could see a very weak/lite (don't know the english word :D) contrast of a dialogue box. I tried to increase the brightness of the screen but it didn't work, so i focused the lamp directly on the screen (in a distance of 1 inch) and saw the dialogue box of the SL installation
Now everything is working, also the lighting of the screen.
Sorry for this stupid thing an thank you for your answers!
Similar Messages
-
VM server on SUN V65x doesn't boot after correct installation
Hello,
I'm becoming crazy!!! I install Oracle VM Server fine, but after first reboot when I choose first (x86) or second(x86_64) entries on boot list, the server reboots inmediately. If I choose the third option, server boots fine but without dom0.
Any ideas?
The Server is a SUN V65x with 2 Intel Xeon 3.06Ghz, 2 GB RAM, and an Intel RAID controller with 6 SCSI HDD 73GB (RAID5 + HotSpare).
my mail: [email protected]
Thanks in advanced.Hi Shawn,
At least I'm not the only one having the same problem!
You are trying to use the cards with the LOMs enabled?
Which screen are you referring to in the first paragraph of your message?
Mine sits in BIOS POST for about 10 minutes and then resets itself....
We are also waiting for an answer from Cisco, so any findings/news will be posted here.
Thanks,
George -
Imessage doesn't work after the installation of the update 6.0
imessage doesn't work after the installation of the update 6.0
iMessage will not work until it's activated.
Switch iMessage OFF. Double tap Home button and delete Messages in multitask-bar.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
Switch iMessage back ON. -
IMessage doesn't work after the installation of the update 5.1
iMessage doesn't work after the installation of the update 5.1
I am unsure whether my issue relates to updating to OS5.1 but seems coincidental that I have only had the problem for the last few days since updating.
I can use iMessage without a problem although some messages are delayed in being sent or received recently. However, I can no longer send MMS picture messages. I have spoken to my provider who has been through all their relevant settings checks. I have restarted the phone (iPhone 3GS), I have tried turning off iMessage to send MMS but still nothing works.
I've had no issue sending MMS picture messages since owning the phone right up until a few days ago.
Has anyone else experienced this or does anyone have any suggestions on anything else I can try please?
Thanks
Jo -
MEGA 865 Computer doesn't boot after flashed.
my problem is .. :
Update My Mother Board Bios and dawnload a file from this site
a file is (AWFL833D.EXE W6797IMS.130 ) for update my mother board Bios
when update completed Restart a Computer ... and here a problem
my Computer doesn't boot after flashed.
i read a (How to flash the BIOS.doc) file and executing a instructions and i am fail.
when i read a (How to flash the BIOS.doc) file i found a Write:
If your system doesn't boot after you flashed, please refer to the BIOS recovery method as described.
i changed a Mother Board clear CMOS jumpers for clearing ,
and not success and the problem is until stay.
i want a solution please.
thanks.Does your computer do or show any error mesages on the screen when rebooted. You did do this in DOS didn't you?
-
I purchased snow leopard from online macstore in Australia and got a disk with OSX 10.6.3 but my macbook with intel processor and 1 gig won't update from 10.5.8. It restarts but doesn't update after disk installs. Do I need 10.6.0 to install first?
Insert the Snow Leopard DVD, restart your MacBook while holding down the C key, this should start your Mac from the optical drive instead of your hard drive. Choose your language and install Snow Leopard. When it's done and you've restarted on your new 10.6.3 system run software update to upgrade to 10.6.8. Done.
-
Mac doesn't boot after splitting BOOTCAMP drive under Windows 8.1
Macbook pro mid 2012, OS X Mavericks
I've installed Windows 8.1 x64 using Bootcamp assistant. In Windows I went to Disk Management and shrank drive C: from 200 GB to 94 GB and created a new drive D: from unallocated space.
After restart Windows doesn't boot giving some error and quickly restart. If I hold "Option" key I see only Windows. Mac OS X disappeared.
How to fix?So, I've tried 1001 ways to recover. Nothing worked. Interned Recovery gives -2002F error. Macbook pro 2012 can't boot from bootable DVD to use DiskWarrior, Drive Genius or similar. It can't boot from OS X Lion install DVD. I had only Windows PC to fix this. So
I asked a friend with latest Mavericks(which I had too) to make a Recovery USB and make a DMG file from it and send me over internet. Then I used the TransMac application under Windows and burned DMG on my USB stick. My god it worked. After 2 days of struggle I found this solution. I was able to boot from this USB stick into Recovery Mode and from there I can reinstall Mac Os X Mavericks. Somehow it sees my Ethernet cable and doesn't give error.
Note: that Disk Utility wasn't able to recover partitions. I tried to run DiskWarrior from terminal but it gave me an error. TestDisk didn't run too. So I'm doing a clean installation.
I could recover or backup my files using Paragon Mac Recovery Bootable DVD, but there was no need since it's my new macbook and I didn't have much files there.
Windows had changed the HD partition map from GUID Partition Table(GPD) to MBR. And made HD a "dynamic disk". This is why Mac Os wasn't able to boot.
If anyone knows how to convert a disk back to GPD and make Mac OS able to boot please let me know. I'm still installing Mac Os X on USB stick and didn't change my HD. -
Downloaded Safari 5, doesn't show after multiple installs / reboots
I went to apple.com and downloaded the latest is Safari 5 at http://www.apple.com/safari/download/ and downloaded the package, ran installation and then rebooted the Mac.
I tried this several times. When I tried to check for any Safari, it doesn't show after installation.
The only contents on the Mac named 'safari' is the .dmg I used. And I tried to install more than once.
I did click on the dmg and did actually use the installer package.
I did also restart the Mac 10.6.8.
I did open my System Profiler (Applications/Utilities), and clicked the gray disclosure triangles so that they face down. No Safari.
I found another thread discussing this, but could not make any of the suggestions work, and several I couldn't even find.
Thanks,
Tony
Hardware Overview:
Model Name: iMac
Model Identifier: iMac10,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM101.00CC.B00
SMC Version (system): 1.52f9
Serial Number (system): QP******5PC
Hardware UUID: 6D4B1C2A-800A-5E20-B0A7-3791AE3F5CA2
<Serial Number Edited by Host>Not in Applications.
Did this download / install multiple times. It's a problem that has happened to others who have posted here.
Tony -
Macbook pro doesn't boot after iOS upgrade
Hi all,
I've upgraded my macbook pro (was requested automatically the upgrade) and after reboot to finish the installation, my macbook doesn't boot up.
Is there any way to boot it up? A kind of boot in safe mode?
I'm trying to power it up but nothing. It doesn't boot at all.
Please, can you help me with this.
Thanks
ÁlvaroiOS is for iPhone, iPad not for Mac. So what upgrade are you referring to?
-
OIF installation - OHS doesn't start after Webgate installation
Hi,
We are using Solaris 10 sparc server where we have installed Oracle Http Server(OHS) instance and Oracle Identity Federation(OIF).
We have also installed Oracle access server on different host and we have created Webgate profile for OHS from Access System Console and assoaciate that webgate with Access Server.
Then we have installed OHS webgate Oracle_Access_Manager10_1_4_3_0_sparc-s2_OHS2_WebGate on the server where OHS is installed, now when we try to restart OHS instance after successful installation of webgate we are getting the following error:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=dm01-app1-zone03:6701
1 of 2 processes started.
ias-instance id=asinst_1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
ohsoam/OHS/OHS/
Error
--> Process (index=1,uid=1447172267,pid=14240)
failed to start a managed process after the maximum retry limit
Log:
/app01/Oracle/asinst_1/diagnostics/logs/OHS/ohsoam/console~OHS~1.log
Note: We are using the following gcc libraries which are required for the installation of OHS webgate:
libgcc_s.so.1
libstdc++.so.5
In the OHS logs we have found an error stating like:
httpd.worker: Syntax error on line 1040 of /app01/Oracle/asinst_1/config/OHS/ohsoam/httpd.conf: Cannot load /app01/netpoint/webgate/access/oblix/lib/libgcc_s.so.1 into server: ld.so.1: httpd.worker: fatal: /app01/netpoint/webgate/access/oblix/lib/libgcc_s.so.1: wrong ELF class: ELFCLASS32
So can anyone please help us out in finding what is causing this issue. Are we missing something or using wrong libraries?Thanks for your response!
We also tried with 64 bit webgate /Oracle_Access_Manager10_1_4_3_0_sparc-s2_64_OHS11g_WebGate/ but we are still getting the following error during the webgate installation itself:
/Configuring WebGate...
There is an error. Please try again.
ld.so.1: configureWebGate: fatal:
/app01/netpoint/webgate/access/oblix/tools/configureWebGate/../../../oblix/lib/libstdc++.so.5:
wrong ELF class: ELFCLASS32
Killed
WebGate configuration was unsuccessful. You can run the configuration program
again or manually run
/app01/netpoint/webgate/access/oblix/tools/configureWebGate/start_configureWebG
ate
Would you like to run it again?
[X] 1 - Yes
[ ] 2 - No/
So please let us know are we using the correct libraries and webgate for OHS.
If not then please suggest the link from where we can download the correct one.
Following are our OS details:
# isalist
sparcv9+vis2 sparcv9+vis sparcv9 sparcv8plus+vis2 sparcv8plus+vis sparcv8plus sparcv8 sparcv8-fsmuld sparcv7 sparc
# isainfo -kv
64-bit sparcv9 kernel modules
# isainfo -v
64-bit sparcv9 applications
vis2 vis
32-bit sparc applications
vis2 vis v8plus div32 mul32
# uname -a
SunOS dm01-app1-zone03 5.10 Generic_142900-02 sun4u sparc SUNW,Sun-Fire-V440 -
Windows 7 does not boot after bootcamp installation
Hey!
I installed windows 7 x64 on my MBP 15" retina with bootcamp, and the installation went fine but after the installation when it said " prepairing your desktop" it just restarted and went into boot loop, so I had to boot into mac OSX and make it primary boot. This have happend 3 times, and I've recreated the ISO image on the USB and I've deleted windows 7 and the partition and I have done the whole process over again (3 times) and it still does not work. Sometimes I get into windows 7 the first time and can move around the desktop with the mouse for about 5 seconds, then it says "logging out" and I'm back at the same problem.
What can I do?
Best regards,
Jack Hellberg.Hi Jack.........ok ive managed to create a link to that video on how to install bootcamp.....this is the tutorial i used and i managed to gain 100% completion on bootcamp 1st time no messing......like i said in my previous reply did you save the windows support files from apple....(Critical).....ok no point in messing about i suggest you start again from scratch........these are the things i used and YOU will need to complete bootcamp
mem stick or cd-r / dvd-r......original copy disc of win 7 ...i never used an iso i used original disc....allow a minimum of 30gb of space for your win 7 partition.....if you want bootcamp so you can use big programs like windows based games i.e.....Crysis/Call of duty etc etc ..then you will need to consider that you will need to allow a bigger partition to allow your HD to store the files.....this is the reason i installed bootcamp and so i made my partition i have a 750GB HD so i made a partition of 300gb for windows 7 and left the other 450gb for Mac....so you need to partition enough for what you want bootcamp for remember once you get bootcamp working you will need to install ALL Important Windows updates Including Win 7 SP1......once everything is installed you will have bootcamp up and running lovely.....u can then boot up with either win7 or mac......click this link and watch carefully and do exactly as shown ok and you should be fine...if you have any probs contact me again ok.....let me know how you get on ok..:)...http://www.youtube.com/watch?feature=fvwp&v=QFIWtXTl4d0&NR=1 -
System doesn't boot after time machine restore to 10.6.8
I had a mbp with 10.6.8
did time machine backup
installed yosemite
saw the app I need for work not work, new I have to go back to that backup
restart->cmd-r->restore from time machine
after this my computer doesn't boot from main disk (that says 10.6.8 now), and cmd-r doesn't work anymore on startup. option gives only the not working main drive, even with time machine plugged in.
what can I do to get my computer to start in any way?Can you use the original install disk/or SL retail disk to start up the MBP and install Snow Leopard again?
Ciao. -
Comp doesn't boot after bios update
I flashed the new 1.90 bios using winflash on my K8N Neo2 Platinum, after the reboot my comp screen didn't turn on and ventilators stayed at max rpm.
I tried clearing CMOS (i know it can't do anything but it's worth trying) and using another stick of ram (PC4000 on hynix chips that can do cl3, my BH5 doesn't boot on cl 3)
but nothing helped.
Is there a way of reverting to the older BIOS?Well it's hard to flash back to an earlier bios if your system don't post .
What you can do is to shut off system , remove +5vsby by turning off PSU .
Then remove all devices except the neccesary cpu/memory/gfx card/floppy drive (specially disconnect all USB ,including usb mouse/usb kb )
After having it barebone , reset cmos with the jumper (min 15.secs to be sure) .
Connect the power and see if it posts with a normal PS2 keyboard and no mouse.
If it does you can flash back with a msdos bootable floppy with awfl833d.exe and the bios file on it . -
3750x doesn't boot after upgrade to version15
Due to a problem with POE+ i have tried to upgrade the IOS to Version15.0.2SE2, from 12.2.58. unfortunatly the Switch doesn't boot up anymore. It starts to decompress and install the IOS 2 Times, after the Second try it displays "unable to boot" and the switch goes in Bootloader-mode.
When i look at the version i See that bootloader is still the old version 12.2.58.
It seems that the bootloader doesn't geht upgraded and that's why the Switch can't Boot the new Image.
Is there anything i can do to Upgrade the bootloader seperatly?
It's a 3750X48PF-S
Many thanks
AndyThis is a stack of 2 switches, both have the same problem and they are still running old image (as V15 doesn't work)
cs156005#sh license
Index 1 Feature: ipservices
Period left: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Priority: None
License Count: Non-Counted
Index 2 Feature: ipbase
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Priority: Medium
License Count: Non-Counted
Index 3 Feature: lanbase
Period left: 0 minute 0 second
cs156005#sh inventory
NAME: "1", DESCR: "WS-C3750X-48P"
PID: WS-C3750X-48PF-S , VID: V02 , SN: FDO1527P0J8
NAME: "Switch 1 - Power Supply 0", DESCR: "FRU Power Supply"
PID: C3KX-PWR-1100WAC , VID: V02L , SN: LIT15060D4H
NAME: "Switch 1 - FRULink Slot 1 - FRULink Module", DESCR: "FRULink 10G ST Module"
PID: C3KX-NM-10G , VID: V01 , SN: FDO14350PDY
NAME: "GigabitEthernet1/1/3", DESCR: "1000BaseLX SFP"
PID: Unspecified , VID: , SN: PR04004346
NAME: "2", DESCR: "WS-C3750X-48P"
PID: WS-C3750X-48PF-S , VID: V04 , SN: FDO1649P24J
NAME: "Switch 2 - Power Supply 0", DESCR: "FRU Power Supply"
PID: C3KX-PWR-1100WAC , VID: V02L , SN: LIT16371ZBN
cs156005#sh version
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(58)SE1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 05-May-11 01:56 by prod_rel_team
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)
cs156005 uptime is 1 hour, 14 minutes
System returned to ROM by power-on
System restarted at 10:11:49 cet Tue Jul 9 2013
System image file is "flash:/c3750e-universalk9-mz.122-58.SE1/c3750e-universalk9-mz.122-58.SE1.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco WS-C3750X-48P (PowerPC405) processor (revision A0) with 262144K bytes of memory.
Processor board ID FDO1527P0J8
Last reset from power-on
2 Virtual Ethernet interfaces
1 FastEthernet interface
104 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : A4:93:4C:95:EC:00
Motherboard assembly number : 73-12553-05
Motherboard serial number : FDO162001GA
Model revision number : A0
Motherboard revision number : D0
Model number : WS-C3750X-48PF-S
Daughterboard assembly number : 800-32727-01
Daughterboard serial number : FDO16200KPU
System serial number : FDO1527P0J8
Top Assembly Part Number : 800-31324-02
Top Assembly Revision Number : E0
Version ID : V02
CLEI Code Number : COMJZ00ARB
Hardware Board Revision Number : 0x03
Switch Ports Model SW Version SW Image
* 1 54 WS-C3750X-48P 12.2(58)SE1 C3750E-UNIVERSALK9-M
2 54 WS-C3750X-48P 12.2(58)SE1 C3750E-UNIVERSALK9-M
Switch 02
Switch Uptime : 1 hour, 14 minutes
Base ethernet MAC Address : 44:03:A7:58:AC:80
Motherboard assembly number : 73-12553-08
Motherboard serial number : FDO164831LB
Model revision number : K0
Motherboard revision number : A0
Model number : WS-C3750X-48PF-S
Daughterboard assembly number : 800-32727-03
Daughterboard serial number : FDO16491JNK
System serial number : FDO1649P24J
Top assembly part number : 800-31324-07
Top assembly revision number : B0
Version ID : V04
CLEI Code Number : COMJZ00ARD
License Level : ipbase
License Type : Permanent
Next reboot licensing Level : ipbase
Configuration register is 0xF
cs156005# -
Stuck on boot after New Installation
Hi!
I've removed Ubuntu and installed Arch and it can't boot after installation. I hangs up after:
/dev/sda1: clean, 31810/2444624 files, 407160/9770158 blocks
I have normal BIOS(not UEFI), and two discs: /dev/sda is SSD with Arch and /dev/sdb is HDD with Windows 8...
Tried playing with fstab, but it was still stucking. Then tried reinstalling, but it's still hanging...
Original /etc/fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda1
UUID=ef1945f4-2d23-479e-a873-802d7bbbf32c / ext4 rw,relatime,data=ordered 0 1
/boot/grub/grub.cfg:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 ef1945f4-2d23-479e-a873-802d7bbbf32c
else
search --no-floppy --fs-uuid --set=root ef1945f4-2d23-479e-a873-802d7bbbf32c
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=pl_PL
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch GNU/Linux, za pomocą systemu Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-ef1945f4-2d23-479e-a873-802d7bbbf32c' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 ef1945f4-2d23-479e-a873-802d7bbbf32c
else
search --no-floppy --fs-uuid --set=root ef1945f4-2d23-479e-a873-802d7bbbf32c
fi
echo 'Wczytywanie systemu Linux core repo kernel...'
linux /boot/vmlinuz-linux root=UUID=ef1945f4-2d23-479e-a873-802d7bbbf32c ro quiet
echo 'Wczytywanie początkowego dysku RAM...'
initrd /boot/initramfs-linux.img
menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-ef1945f4-2d23-479e-a873-802d7bbbf32c' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 ef1945f4-2d23-479e-a873-802d7bbbf32c
else
search --no-floppy --fs-uuid --set=root ef1945f4-2d23-479e-a873-802d7bbbf32c
fi
echo 'Wczytywanie systemu Linux core repo kernel...'
linux /boot/vmlinuz-linux root=UUID=ef1945f4-2d23-479e-a873-802d7bbbf32c ro quiet
echo 'Wczytywanie początkowego dysku RAM...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 8 (loader) (na /dev/sdb1)' --class windows --class os $menuentry_id_option 'osprober-chain-1EF4F8F7F4F8D24F' {
insmod part_msdos
insmod ntfs
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 1EF4F8F7F4F8D24F
else
search --no-floppy --fs-uuid --set=root 1EF4F8F7F4F8D24F
fi
drivemap -s (hd0) ${root}
chainloader +1
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
(Btw. on my laptop Arch is working good...)
Last edited by Flanders (2013-02-17 17:42:58)Remove quiet from the kernel command line so that you get as much information as possible.
You only have the one partition for Arch, right? The fstab is complete?
Look in /etc/default/grub and select the most basic, debugging-friendly options you can. E.g. make sure recovery entries are enabled etc.
Last edited by cfr (2013-03-10 02:52:55)
Maybe you are looking for
-
Release for blocked invoices (Ref: Q4-6)
Dear Sirs, After executing the u201CRelease for blocked invoicesu201D using transaction MRBR, the u201CManual Blocku201D indicator can be released in Invoice Header u2013 Payment tab. However, the indicator was still checked in Invoice Item(s). Even
-
Removing Google Search History
Hello. I use Google as my home page on Safari, and usually use it to direct my browser to where I would like to go. I have been a fan of Google remembering things that I've typed into my search bar, so that I only need to type a couple letters and I
-
Monitor backlight comes on briefly, then blanks out
I'm using a COMPAC PRESARIO laptop that's running WINDOWS XP. I've had the system 7 years & had a couple viruses that were supposedly cleaned up, but it was done by someone else so I'm not sure of this. PROBLEM DESCRIPTION & CORRECTION EFFORTS TO D
-
Hi, There is a report based on a select which includes several tables, views and an inner select. In the last several years, any date will give no more than a couple of hundred records except for one day in 2006 when there are almost 3,000 records, a
-
Using Photoshop 6 and whenever I type the cursor remains stationary but the typing will appear in the layers pallet but not on the project. Help please. Have pressed something somewhere that is making this happen?