SL410 - One speaker stopped working - lcd hinge problem ?
SL410 here - I noticed the right speaker stopped working. It works intermittently if I press down on the left side of the lcd screen or the hinge. I believe the wires are being routed from that hinge (?). Audio out of the headphone jack works just fine.
Any ideas what might be going on ? Is this a known issue with a known fix ? Would it require major surgery to fix this ?
Any help would be highly appreciated.
Thanks!
Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that right speaker of your Lenovo ThinkPad SL410 stopped working.
Since the headphones work fine and you hear intermittent audio while pressing the LCD/hinge, chances are that the wire that goes to the right speaker is probably loose or the speaker itself needs to be replaced.
Refer the hardware maintenance manual to understand how to remove the speaker assembly and check.
If your system is under warranty, I strongly recommend you to contact our technical support for assistance.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Best Regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
I have I phone 4s and the speaker stop working suddenly, I can hear through the headphone but when I remove the headphone can not hear anything , please advice what is the problem? Thanks
Thanks for your reply, but what shall I do now ? I bought this phone from china's apple store, and I am in Egypt so there is no warranty for this phone in my county, please advice how can I solve this problem? Is there any troubleshooting tips I can follow to solve this problem ?
Thanks -
IPhone speaker stopped working today. Not 1 year old yet.
IS this iPhone worth the headache of trying to get the speaker working?
OR should I just buy a new samsung?
IM not impressed with iPhone this one isn't a year old and speaker stopped working. It is a disposable hyped up junk!!!Hard to find your question amongst the tantrum.
What have you tried to fix it?
Is the volume up?
Is the mute switch on?
Have you restarted it?
Reset it?
Restored it?
Anything other than complain?
Samsung?
No sound at all - Help Please! - Android Forums
Samsung phone sound Problems & Solutions - FixYa
Samsung Captivate: Sound not working over loud spe... - AT&T ...
Samsung Galaxy S3 Sound/Voice Problems and Advices S 3 ...
http://www.youtube.com/watch?v=SVubISFrNGw
No sound during calls (samsung galaxy s3 problem) - xda-developers
Plans AUDIO issues with samsung galaxy proclaim
Samsung Galaxy S2 — Speaker and mic problem when calling someone ...
Media sound not working on samsung galaxy s2? - How can i turn ...
The sound to my samsung galaxy blaze is not working, the incoming ...
No sound from speaker or headset - Windows Phone Central Forums
Simple Ways to Fix Samsung Galaxy S2 Sound Issue - Articles ...
galaxy s3 sound problem - Samsung - Android phones -
SharePoint Online 2013 Workflows for one List stopped working after 07/08/2014
Our client host application in Office 365 SharePoint Online 2013, and we just found that all workflows for one list stopped working after 7, Aug 2014. It kept displaying pop-up message "Something went wrong. To try again, reload the page and then start
the workflow." when manually start a workflow for this List.
Tested workflow for other list, there's no problem.
Could anyone can help on this issue?Our client host application in Office 365 SharePoint Online 2013, and we just found that all workflows for one list stopped working after 7, Aug 2014. It kept displaying pop-up message "Something went wrong. To try again, reload the page and then start
the workflow." when manually start a workflow for this List.
Tested workflow for other list, there's no problem.
Could anyone can help on this issue? -
Hello everybody> my itunes has stopped working and the problem report stated the following:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.5.3.3
Application Timestamp: 4f14cc3d
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7b8f0
Exception Code: 80000003
Exception Offset: 0003381b
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
can anybody help me?Are you seeing a similar message when launching QuickTime Player?
What security software is installed on the computer? Have you tried testing in an admin account or after uninstalling tthe security software?
Use one of the following articles to guide you through removing iTunes and the related QuickTime files.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
iTunes keeps shutting down when I open it up. The message says iTunes has stopped working. A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solutions is found.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried something like the above then try opening iTunes in safe mode (press and hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud Purchases. You may find that iTunes opens normally now.
tt2 -
Left external speaker stopped working
Left external speaker stopped working, right works fine. When I connect headphones, they work fine. Have tried two different sets of speakers, deleted plists and reset pram. Please help!
Hmm. I think its not a sound card and its not a speaker problem because both parts (left speaker and sound card) seems to be ok as you have posted in your message.
Im not quite sure what could be wrong but possibly this issue has something to do with the headphone jack there is a tiny switch inside the headphone jack which enables and disables the speakers if the headphone jack has been plugged.
Maybe this switch does not work properly.
What to say in such case the hardware needs to be replaced but in most cases the headphone jack is a part of the motherboard and in such case the whole mobo needs to be replaced and I think this is not worth because of the high parts costs -
Deskjet F2235 All-In-One has stopped working
Hi,
My all-in-one has stopped working. I purchased it new at Christmas 2008 and have only printed 2 test pages, but now when I turn it on all the lights on the front panel light-up & my PC says the printer is off-line. I cannot even get it to turn off by the on/off switch... I have to pull the mains plug from the back.
- I have un-installed & re-installed the software twice without improvement.
- I have replaced the USB cable without improvement.
My PC is a 2.4GHz Celeron 2 with 512 Mb RAM, XP Home SP3, 80Gb hard drive with 7Gb free.
Any ideas ?
Thanks in advance.seems like a hardware issue. can you please follow THIS document and see which lights are blinking, and do the corresponding troubleshooting and see what happens?
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee. -
Yosemite - Bluetooth speaker stops working
I have an issue where my Bluetooth speaker stops working. It shows up on the devices list under Bluetooth but when I try to connect it does not do anything.
Rebooting fixes the problem. But then the next day when I try to use the speaker again it does not work.
This started happening with the upgrade to Yosemite.
Please advise, thanks,
OS X 10.10.1. MacBook Pro 15" Retina mid 2012Scratch that. Things have improved in 10.10.2 - I am able to reconnect to the Bluetooth speaker more often, but it does sometimes fail and I have to reboot.
-
Apple 4 Sum time durring call head fone Speaker stop working so what to do?
Apple 4 Sum time durring call head fone Speaker stop working so what to do?
No idea what you mean. Are you asking about a problem with your headphones or the phone speaker?
-
I have an Iphone 4s and its fairly brand new still, and all of a sudden i was talking on the phone and the speaker stop working.. Is there a manufacture warranty on the iPhone?
Verdale wrote:
... Is there a manufacture warranty on the iPhone?
There is a One Year Warranty...
iPhone User Guide
Have you tried any of the Basic Troubleshooting Steps...
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Why does the ipad 2 speaker stopped working after upgrading to ios 8
WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond
Hi A_S85,
It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D -
I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
Blackberry Desktop Software has stopped working. A problem has caused the program to stop...
I have a Tour 9630 and just installed v6.0 and receiving an error window "Blackberry Desktop Software has stopped working. A problem as caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I have not received any message from Windows after 2 days. Has anyone experienced this problem? If so, I would appreciate any guidance. I have Windows 7, if that matters. Thank you. in advance.
Hi somewhatstock
How far did you get with them? Did they have any ideas what might be causing the problem? Trying to work on it myself, so trying to eliminate what others might have tried. Curious why it works on my Desktop however. Losing tethering really causes problems as I rely on tethering with my laptop quite a lot.
Any information most welcome,
regards,
John -
iTunes64Setup.exe, even after multiple times of uninstalling and reinstalling with even a fresh download crashes with the message:
"iTunes has stopped working. A problem [unspecified] caused the program to stop working correctly. Windows will close the program and notify you IF a solution is available." I cannot get out of this loop and it renders my iPad HD useless. I tried calling the Apple Store but was referred by an automated system to this web site. I tried looking up the problem in the FAQ but it didn't help.
merylewHi there Nok Saensanoh,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W.
Maybe you are looking for
-
How do I include a line feed in the replace section of the find and replace feature of Homesite 5.5? Converting many lengthy files from <pre> and <tt> formats into CSS. Presently the target pages have paragraphs broken into short lines of text with C
-
How to create a new user id in OID for Oracle Collab suite File System
Dear Friends, I want to know how to create a new user id in the oracle internet directory where i can use that user for the new subscription of the oracle collabration suite file system.. Please do the needfull and thanks in advance... With warm rega
-
How do I update my computer without messing up my iTunes stuff?
I (desperately) need to update my Gateway laptop from Vista to Windows 7. How can I do this without losing all my iTunes information and my iTunes account (which is on my computer)?
-
HT1444 how do i upgrade my 10.5.8 to leopard or snow leopard?
How do I upgrade 10.5.8 to leopard or snow leopard?
-
Hi, My report is based on a view which holds apprx 15 million rows and 15- 20 columns... it is currently taking almost a mint to two to pull the data... May I know if there is a faster way to pull this info...? Thanks again in advance