SL440 Over Heat and Wireless disconnect

Hi
I have a problem with Thinkpad sl440. I get these types of problem not a single laptop but also any of them.
First problem is over heat I measured overheat of the HDD by crystal disk info After one or two hours left its temp goes to 50°c.
Second one is wireless Lan Disconnect  after few hours later the wireless disconnect automatically and it also doesn't show any wifi signal in his range. But after restarting the wireless lan work again. After that it goes to disconnect again after few hours.
I hope this problem occurs from over heat from the motherboard..
Please give me a solution.

Hi have a look through this Link there may be something there that may help you
http://forumhelp.dyndns.info/wireless/wirelessmenu.html
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

  • My ipada mini has over heated and its not starting

    my ipada mini has over heated and its not starting

    What do you mean by 'frozen' ? Have you tried a soft-reset to see if that gets it to work ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My hp compaq presario62 has been over heating and mostly shut down what can i do

    my hp compaq presario62  has been over heating and mostly  shut down  what can i do?

    You can try a usb cooling pad but I am not a big fan of them....if your laptop needs one there is a problem that needs to be fixed. The likely issue is a clogged fan and cooling system which requires disassembly and cleaning out around the fan and heatsink, removing the heatsink and appplying new thermal compound. You can also perhaps help by using compressed air blown into the heat vents.

  • Over heat and automatica​ly shut down,

    when i'm useing my notebook sometimes it over heat and automaticaly shut down,plese tell me how to fix it..

    Hi NayanajithRox, welcome to the HP forums. What is the model number of your notebook? What version of Windows is installed?
    How Do I Find My Notebook Model Number?
    Which Windows operating system am I running?
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HT4061 I got a brand new iPhone 4S on contract last week and since I've had it it's been over heating and it's turned itself off once and every now and then the screen flickers I just wanted to know is this a common thing as I've never had an iPhone befor

    My new iPhone 4S that I have had a for about a week keeps over heating a lot and its turned itself off once and I couldn't turn it on for over half an hour,also my screen flickers from time to time and I'm not sure what to do as I not had an iPhone before can anybody help me please I would be very greatful.

    No, it's not normal.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).
    Frankly though, considering it's new, take it back to Apple.

  • My iphone 4 is over heating and it overheated then shutoff and now it wont charge what should i do?

    please help me it stopped over heating along time ago then started back up again. but now its not charging.:( even when its off it still overheats.

    Hi rayeny,
    Welcome to Apple Support Communities!
    The article below provides tips that will help you find out if there is a hardware issue and how to setup service if there is.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Resolving Issues
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    -Jason

  • Has anyone else had any problems with their phone over heating and shutting down?

    I've had my phone for less a month and I've already had issues with my iphone 4. On several occassions it has overheated and shut down. On one occasion I put the phone in the side pocket of my purse where, I also had a charger for my camera. When I removed the phone, it was hot...not warm but hot! On another occasion I was at the movies and put the phone face down on my lap, at one point i touched the phone and again it was hot. When the movie was over, and I looked at the phone it had shut down....this has happened a few  times more since then. I've also had problems with the phone shutting down on it's own. I took it to my local apple store and the representative looked at my phone and ran a diagnostic check for me. He said the everything on my phone looked normal and that my phone probably needs a "breaking in" period...to give it a couple of months...He really didn't tell me much more...I don't use my phone for more than the basics...calling, texting, and some mild app use...I don't understand how I can be having these problems when I've had my phone for less than a month...The rep tried selling my the Apple insurance. He told me that through ATT I only have 30 days, and I would be better off getting this insurance. I feel very dissastisfied with the service I got. I was done with my appointment within 10 mins, I don't think the representative took the time to listen to my concerns.

    Thanks for your reply, but I guess whether this was a silly question is a matter of opinion. That is the whole purpose having these forums...so that people can post their questions, silly or not. Maybe you are an Apple expert or have "techy" knowledge, but I don't. So what may be silly or stupid for you, can be completely different for a novice apple consumer like me. If you must know, I did do my research, and I did do the basic trouble shooting.All to no avail. I took my phone to the apple store, had it diagnosed and was told some very inaccurate information. I ended up going back today, and got a second opinion. This person actually took the time to talk to me and to better explain Applecare and my warranty. She also told me that there is no such thing as a "break in" period, and when there is a shutting down issue, even after a "restore" that it was better to get it replaced. Which is what she did. She replaced my phone. Obviously, the first person, by his own admission, was too tired and ready to go home to actually take the time to explain and offer other options...

  • Over heating and too much soung occurs

    I have a HP pavillion DV6 - 3116TU, product No- XV872PA#ACJ, Serial no-[Personal Information Removed] with windows 7 ultimate 32bit operating system.my laptop gets heated too much and sounds much. what should i do?

    Hello aman2002,
    Please take a look at this document, which will provide troubleshooting steps regarding your noisy fan.  This document describes how to reduce heat inside your PC.
    Please let me know if this helps resolve your issues.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • W520 over heating and nvidia quadro 2000m disabled by windows

    I rencently reinstalled windows 7 on my W520 and it refuses to activate my nvidia quadro 2000m (Code 43)
    For a while the fan is overheating and the right left hinge become very hot.
    I think the graphic card is dead but I want to know why and if I can stop the overheating.
    Is the the graphic card soldered onto the motherboard of the W520?
    Thanks for your help.
    P.S: Only the Intel HD graphic chipset is running ...
    Solved!
    Go to Solution.

    After install win7 I install the driver for the wifi and the lenovo system update software. Then I run it and check if all devices are enabled. If there is someproblem I download the drivers from the website.
    I already tried the nvidia optimus display driver and the the nvidia card is still disabled. I also checked if optimus is enabled on the BIOS and it is.
    I used Lenovo Solution Center Lite to test the graphic cards and only the Intel HD Graphics 3000 can be tested. I got messages like "Can not send OpenCL and Direct3D command" and the result code "WVC000000-WJHZ4H" for the nvidia so the soft can not test it.
    My opinion is that the nvidia is dead and I need to replace it if the it's covered by the warranty otherwise I will have to buy a new desktop to play my games and use my W520 only for programming ...
    EDIT : I think my battery is almost dead, before I reinstate win7 I got a warning that battery should be changed. Can it have led to a malfunction that damaged the motherboard or the graphic card?
    P.S: I made a mistake, it's not the right but the left hinge that heat ... sorry.

  • Pavilion DV2000 Class Action Lawsuite (over heats and battery doesn't work)

    Hello HP and to whom it may concern -
    I was recently laid off and I had to turn in my work laptop so I pulled my HP Pavilion DV2225NR out again after it being in storage for well over a year to see if I could make some progress to get it to work again since I had some time.  I have seen some information online regarding a class action lawsuite due to hardware problems.  At one point, I even took my notebook back to BestBuy where I purchased it and it was returned for repairs more than once and it still never worked properly.  I've invested a lot of time and effort this past week to try and get what I paid good money for several years ago to work properly.  I also own a HP Pavilion desktop and wonder if it also hardware problems and that is why it doesn't seem to work properly anymore either.  I'll be checking into that one as well. 
    All I want is a laptop that works and either that this one be repaired at no cost to me by HP or that they replace it with a comparable and working machine.  
    I look forward to hearing from HP as I really need equipment that I paid for to work now more than ever so that I can use it to find another job.
    HP don't let me down!
    Best Regards,
    JB

    I am sure there will be no thanks or kudos but I will try to give you some kind of an answer. The dv2000 and similar models with AMD processor were one of the largest group of defective products released onto the U.S. market, but it was in 2007 and 2008, or 5 to 6 years ago. HP issued an enhanced warranty but you had to ask that it be fixed within 2 years. It was not a recall. The problem is the nVidia video chip and nVidia was sued in a class action and offered repairs and cash damages but that closed maybe 2 years ago. The long and the short of it is all your consumer rights have expired. HP will not fix it free or provide you a new laptop. These things have time limits just like if you get hurt in a car wreck. You can't wait longer than the statute of limitations and then ask for a remedy. There are shops that will fix them for around $100 and if you are still communicating I can help you with this. We are sorry to hear of the job loss and wish you good luck. We do not work for HP we are volunteer peer-to-peer helpers. 

  • Over heating and battery drain on iPhone 4 after iOS 7.1 update

    I am facing heavy battery drain and overheating after updating my iPhone 4 to IOS 7.1
    The battery discharges @ 1% for every minute - when not in use / idle. The handset stays uncomfortably warm. The background app refresh, location services, screen brightness etc have been switched off/kept to the minimum. Though there is significant improvement in responsiveness. There were no battery/overheating  issues with iOS 7.0.6.
    Have reset all settings, switched on/off, given a hard boot (power button + home button) but no use.
    Suggestions to resolve this are welcome.

    This is not a software issue!!!. Yes, it may cause by the software update.. I had the same issue with my Iphone5 after 7.1.. I went crazy .. seeing my battery draining 1% a minute without using it.. and it took more than 7 hours to charge completely. Worst my IPhone was out of warranty cant take it back to Apple to have it fixed.
    Things already did -
    I changed the battery
    Restored the phone
    Switched to setting basically nothing
    Waited for 7.1.1 to come out and then update the phone
    But none of these helped at all
    So i rolled the last dice.. took my phone to a local technician (in Philippines). They said none of the above will resolve the issue.
    What exactly went wrong was the - USB POWER MANAGEMENT CONTROLLER IC U2 was busted. Once this was replaced my phone worked just fine. in fact I was amazed with the results.
    My phone charged 100% from 20% in less than 60 minutes.
    Now my battery lasts for more than 15 hours ( i do not use mobile data only Wi-Fi)
    So if your phone is out of warranty no harm in getting this part replaced. If within warranty you may get a replacement handset.
    Now to what causes this as per the technician " Every update from apple tries to exclude accessories that are not certified, and you do get the pop up that this accessory may not be supported" continue to use the charger will fry the IC U2 .
    Hope this Helps goodluck

  • HP New their laptops over heat and have a problem and still sold them to us

    Hi,
    I have a laptop that overheats and crashes and now needs a new motherboard because HP new about the problem with their design and still sold these entertainment centers to us even though we cannot watch anything on it because they will overheat,.
    Thanks HP

    The following line tells me that this is not a template file, but a document created from a template called index.dwt
    <html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/index.dwt" codeOutsideHTMLIsLocked="false" -->
    This means that you saved a child document as a template file at some stage.
    If you go to Modify->Templates->Detach from Template, you can remove the template structure from your document. All you then need to do is to re-save the document as a template.

  • I think my computer over heated and now won't charge! Can that happen?

    I had my laptop plugged in and I notice the charger and the computer where really hot. So, I unplugged it and started it up and everything was fine. The next day however, my computer won't charge and the bright green light that appears when you plug In does not light up. Mind you, a dim green light that is always on the charger is still there. Any help?

    iphoto is on grey disk 2 (applications/apple hardware test) that originally came with the computer.

  • Close iBook lid and wireless disconnects

    Hi there
    I;m new to the mac platform and is there anyway of getting around this as when i move the iBook about with lid closed (sleep mode i think) and then re-open it seems to cut off my wirless connection..not much use when downloading etc.
    Basically do i have to walk around with the lid open or is thereanyway of getting around this ..it's not a big deal but just wondered thats all?
    thanks

    Hi s-tone,
    All perfectly normal, I'm afraid. That's what sleep mode does - put it to sleep. Everything shuts down whilst maintaining the state that it was in before you shut the lid.
    Other than unofficial, warrantee busting hacks, there is no way to keep your iBook awake while it is closed.
    If it's not a silly question, why do you want to carry it around while it's downloading?
    Enjoy your iBook, and enjoy learning about the Mac platform.
    Adrian

  • Satellite A210 - Over heating and problem updating BIOS

    My aunt was having problems with her A210 so she bought herself a new one and gave me the old one. The problems she was having was the computer kept randomly shutting down. I think it is an overheating problem because the laptop runs pretty hot. The BIOS has never been updated so I was thinking that might help with this problem. Anyways, when I tried to update the BIOS this error message came up.
    Cannot load driver C:\Users\Dan\Desktop\MK10AWF\PHLASHNT.SYS.
    Please check your accounts, if you have no administrator privilege, please login again!
    Access is denied.
    Error code: 5
    I am the only user on the computer and I have administrator priveleges so I'm not sure why this error is coming up. Please help. Thanks

    > Has anyone else experienced overheating problems with the A210? Any solutions?
    Hi mate
    Im an Satellite A210 owner and to be honest an higher internal temperature could happen if the notebook would not get enough air in order to cool the internal parts like CPU and GPU.
    Some weeks ago I used the notebook lying on the couch I didnt notice that the cooling ventilators which are placed at the bottom of the unit were clogged because of my relax position if you know what I mean ;)
    After a short time of usage, the notebook shut down automatically I was a little bit surprised but I realized that the air could not circulate and therefore the notebook overheated
    Now, Im using the unit only on the desk. This is recommended and it helps to keep the temperature on lower level
    PS: My BIOS is up to date...

Maybe you are looking for

  • Error Code -42408

    When trying to turn on Genius in iTunes 10.7, I receive the following error message: An unknown error occurred (-42408). Does anyone know what this code refers to and how to resolve this issue? Please note that this happened as a result of upgrading

  • My Screensaver always goes back to National Geographic

    Hey. I've set a personal Screensaver because I like it when a Slideshow will be shown on my screen while I'm not on the iMac. For some reason my screensaver always goes back to the original National Geographics Pictures and I don't know why. I've bee

  • Problem in bbm display image

    When I change bbm display image,it is not clear,its always blurr and dull it's not original image,might be there is some problem in bbm. Pls guide

  • Flying Blind into a Mac OS X Server Password Reset

    Let me preface my questions with the note that I am experienced with general OS X user administration but I am coming off of 5 years of heavy Windows network consulting and administration. I'm comfortable with the command line (have a good deal of *n

  • How can we change the SID of an existing SAP  system.

    Hi to all basis experts. Is it possible to change the SID of an existing SAP system. i am performing R3copy method and i want to change the SID of the tar