SLA Pre- upgrade programs and process and SLA Post upgrade

Hi Guys
Can anybody please let me know what are the SLA Pre- upgrade programs and process we have to run and SLA Post upgrade process and programs.
Thanks
Ajeesh

Pl post details of OS and EBS versions. Pl see if MOS Doc 604893.1 (R12: FAQ for the SLA Upgrade: SLA Pre-Upgrade, Post-Upgrade, and Hot Patch) can help
HTH
Srini

Similar Messages

HT3805 I just installed Aperture 3 from a CD. i also imported my photos from my Iphoto library. After importing most of the photos imported are blurry and it tells me the program is "processing" and it never stops. What do I do?

I just installed Aperture 3 from a CD. i also imported my photos from my Iphoto library. After importing most of the photos imported are blurry and it tells me the program is "processing" and it never stops. What do I do?

I just installed Aperture 3 from a CD. i also imported my photos from my Iphoto library. After importing most of the photos imported are blurry and it tells me the program is "processing" and it never stops. What do I do?

HT4796 When I run migration assistant on my PC, I get a message saying windows mail is running and won't let me proceed. Windows Mail is not running. I checked Task Manager's applications, services and processes and found no references to Window's Mail.

Got a new iMac 27" for Christmas (well a little after) and tried using Migration Assistant to transfer some files. I can't get past a window on the PC that pops up indicating Quit Other Programs Before you can transfer your information, the following programs must be shutdown: Windows Mail Close these programs and run Migration Assistant again. If these programs do not appear to be running, restart your computer and try again.
I've rebooted. I've searched Task Manager - Applications, Processes and Services and there are no references to WMail. I don't or haven't knowingly used Windows Mail and Outlook isn't even installed on my PC. Does anybody know how to get around this without using external drives, USB flashdrives, etc.

Lots of fun.... The superdrive in my Macbook seems to have gone off kilter since my install. Now the CD-R won't work regardless of which operating system I use. Normal CD's and DVD's are fine, but any CD-R is taken as a blank disk.
Using an external CD drive solved this problem.

File from application server -Read and process and delete the file .

Hi All,
         I writing a ZEE program which will read the file from application server(file will be in text delimat format) and moving the data to internal table and uploadind data base.The part which iam facing problem is -
> I hve read the file from application server like below ,
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
EXIT.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
Spliting part i having problem .i need to seperate each field which is seperate from tab delimite and pass it into respective fields of internal table .
Second if another file come to the appicaltion server , wether my first file will be there ? or should i need to delete the first file after redaing how should i proceed further ?.
Regards
SRIRAM...
THANKS In ADVANCE

HI,
1.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
EXIT.
ELSE.
DO.
CLEAR: wa_string, wa_uploadtxt.
READ DATASET ld_file INTO wa_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
SPLIT wa_string AT cl_abap_char_utilities=>horizontal_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
APPEND wa_uploadtxt TO itab.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
2. If the another file get's generated in the application server with same file name then the data in old file get's over written with the new data. You are not required to delete the file.

Help required in running SPAU and SPDD transactions for post upgrade

Hi All,
We are doing a system upgrade to EHP1.
We need help in SPAU and SPDD runs and why are they required in upgrade activity.
Kindly respond.
Thanks in advance
Regards
Rashmi

Hi Rashmi,
SPDD and SPAU are modification adjustments that you need to adjust after upgrade. This is a situation where the upgrade has to enhance some structures and elements that was available in previous version (probably 3.x). The system can not determine whether to overwrite the structures or to retain the old version. If the structures are custom structures, the system might overwrite any enhancements that you have done. In this kind of situations, the system puts any such structures and elements that it can not make a decision into these 2 lists. SPDD is for dictionary objects and SPAU is for configurations. You have to fix all the issues that are produced in these transactions. You need to first fix the ones in SPDD list and then the SPAU list. Once you drill down in those lists, it asks you to take actions like "change it", "keep the old version" or "ignore the changes" (I think these are the options). You need to chosse these options based on your analysis and turn all the yellow and red ones into green. Hope this gives you some idea.
Thanks and Regards
Subray Hegde

Problem with AND process in daily running process chain

Dear Friends,
I am currently I am facing problem with AND process. In my daily running process chain, daily the process chain is failing at AND process. Currently I am workaround and manually repairing the AND process and loading the data with below (link) steps.
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
I need permanent solution for this reoccurring problem. Kindly share your thoughts and ideas to resolve this problem.

Hi,
The below are the job log. After this the batch job is failing.
Job log overview for job: BI_PROCESS_AND
Job started
Step 001 started (program RSPROCESS, variant &0000000190315, user ID MAESTRO)
This AND process is not waiting for event RSPROCESS, parameter 475P4YTXTIIOA6IQ9GAZVEP24
Job cancelled after system exception ERROR_MESSAGE

Process chain Error: This AND process is not waiting for event RSPROCESS

Hi All,
I am facing an error in the process chain in PRD.
Error message: This AND process is not waiting for event RSPROCESS.
We had a process chain which had two sub chains which run parallel and below of this we had AND process type and below of the AND process we had 4 more jobs.
Once the two subchains got successfully loaded, the and process should turn to green and further 4 jobs should start.
It is a daily load , it worked fine from past years,but suddenly the AND processtype is getting failed.The thing is in the two subchains if one got completed, the AND process process is not waiting for 2nd subchain to get completed.The AND process is turning to RED (status: cancelled) . I tried to repeat the AND process once after above 2 subchains loaded, but it didnt worked.
And i removed the existing AND process and created a new one and placed it in same place and activated and schedules again.but still it is getting failed with same error.
Thanks in advance,
Sai Chand.S

Hi,
If you did any transports related to that metachain we face similar kind of issues.
not only the AND process , we need to remove all the process before executing the AND process and create it again.
It helps you, you said your in production So you should take the proper approvals and do it.
Regards,
Yerrabelli.

AND Process

Hi Every one,
My Process chain is getting failed in the AND Process.Due to this all my dependent Process chains also not running.
How can i make the AND process sttaus to green?Please drop all your valuable suggestions on this.
Below is the error message.Is there any Function module to change the status to green and resume the loads?
*This AND process is not waiting for event RSPROCESS, parameter 4FCRJ6Y13IB4REHCKENODFOK0 E RSP
Thanks in advance,
Chandu.

Hi,
1. Right click on the failed AND process and goto chain tab, there you will find the Instance and variante take those.
2. goto SE16, give table name as RSPCPROCESSLOGpress enter give the variant and instance that you have taked previously-- execute.
3. take the LogID and Process Type from the entry it is displayed.
4. Goto SE37, give the FM name RSPC_PROCESS_FINISH and execute.
5. in the entries give the Log ID, Process Type , Variant and Instance and Status as 'G' and presss execute.
Now the further processes will tirgger when you execute that.
Hope this helps.
Veerendra.

Spot and Process colors - Color Mode confusion?

I have a question about how to choose colors in the New Color Swatch window. I think that I understand the difference between spot and process colors, but the dropdown options confuse me because whether I choose Spot or Process in the Color Type dropdown, the same list of libraries appears in the Color Mode dropdown. How does that work, or why does that happen? Is it a conversion? For example, if I choose Process as the Color Type, but then choose Pantone Solid Coated in the Color Mode, it shows me the colors available, but aren't the Pantone libraries for spot colors? And if I choose Spot as the Color Type, but then pick CMYK in the Color Mode, it gives the CMYK sliders. But shouldn't I be forced to pick from a Pantone library for a spot color? I would appreciate any explanations of this as I want to make sure that I pick the appropriate colors for my printed projects. Thank you!

You can create a spot color with a custom CMYK mix (and even name it the same as a library color if you want). The utility here is that you can create a custom spot color with a custom process conversion, or use your own own conversion numbers for one of the book colors if you think you have a better mix. I recently had to do a special mix for a Pantone spot conversion to fit a particualr press in order to get a better match to some other materials. That's how we handled it, though I did it by aliasing the pantone swatch to my custom spot and then changing that to process in the ink manager, rather than messing with the library color directly, which meant I could have either the custom or the book values, depending on the settings I chose, if the job went to another press.
There are, I believe, four sets of process libraries included in ID. The Pantone Process libraries are sets of stepped percentage mixes of the four process inks and have names that start with DS followed by some numbers. I think TrueMatch is a simialr system, though I've never worked with a printer who used it. Pantone Color Bridge and Solid to Process libraries are both process simulations of the Pantone Solid spot libraries. The Color Bridge is newer, and I think is largely replacing the solid to process.
You can get printed swatch books for any of the included libraries (spot and process) and you should do so for any library that you are going to use to specify color. Spot colors in particular may not render well on your monitor, and the press operator couldn't care less what you see on your screen. He's going to pull out his swatch book to verify that the color he puts on the page is the same as you specified.

HCM Form and Process ERROR No error agents maintained in table T5ASRERRORAG

Hi All,
I am setting up HCM form and Process and I am done with Setting up new scenario and form and workflow steps. When I do the check consistency for Processes I get these 4 error below and not sure what do i do about these error
No error agents maintained in table T5ASRERRORAGENTS
Case type for Step Object H_SO is not defined
Case type for Scenario Obj. H_FO is not defined
Case type for Process Object H_PO is not defined
Any help will be appreciated.
Thanks,
-Ashwani

Some elaboration would help here a LOT! Would it be possible to get some more info about it?
I am following this tutorial: http://help.sap.com/saphelp_erp60/helpdata/EN/42/f273461e5132c3e10000000a1553f6/frameset.htm
and didn´t find any "sub-chapters" about this. am I missing something? Or could you tell me the number of the tutorial step which I performed in a wrong way or did NOT performed?
Thank you, cheers Otto

Process Chains AND process error

Hello all,
I have process chain for weekly master data loading. In one step after loading master data we have AND process and there after Attribute Change Run process.
When I ran process chain the Master Data load process is successful ( upto that it is green in log view ) . After this process AND process is showing RED.
The display message is as follows:
This AND process is not waiting for event RSPROCESS , parameter
423HLT8HZUIQTNDHWZJFNPBRC
Please let me know if any one has SOLUTION to this. Thanks in advance.
Yours
SRM

HI SRM,
That means, The proess after AND is watining for one process, the same
process which ur process waiting is already using by some other process.
That means for one process two process chains are calling at a time.
So this process chain failed due to the process is running by other process
chain.
Now, after 10 or 30 min run again your process chain. if it runs successfully
then maintain the time gap between the two process chain which are using
the same process.
Hope the answers is suitable for u.
Thanks
Rajesh

Process chain hangs when reaching AND process before Attribute Change Run

Hi Experts,
I have the following problem. For some reason my master data attribute process chain hangs when it reaches the AND process variant right before the Attribute Change Run. It does not go anywhere from that point.
Thank you

hi AG,
if this is hanging daily at the same place without proceeding further, and with out giving the instance for the same. then the better way is to replace that AND process in the chain with the new AND process. and then check and activate ur chain. this wil solve ur problem.
if this is the first time that happend to u, then check the previous load status, if any of the load has failed and u didnt turned the status of the process then also this can happen. So please do check it and act accordingly. If u cannt find the resolution then please run ur changerun manually.
u can use RSPC_PRCESS_FINISH FM to convert the status of any process. for this u need to give instance and variant details. and then if u execute, then chain will continue further.
Hope this will help you.
thanks
Vishnu

Is there any upgrade program from logic pro 9 to X?

I own two licences for Logic Pro 9 and I am curious if Apple offers any kind of upgrade program for current users?

No upgrade programme available. based on price v competition chances are tthere never will be.

I use sites with pdf's a lot. Why isn't pdf viewing built into Firefox? The extensions can't keep up with your rapid upgrade program.

I use sites with pdf's a lot. Why isn't pdf viewing built into Firefox? The extensions can't keep up with your rapid upgrade program.

Thank you for your post. This forum is for Sony Consumer and Vaio products - for gaming questions and discussions there is a separate PlayStation forum:
http://community.us.playstation.com

Upgrading Oracle Text - Post upgrade step 10.2 to 11.2

I already upgraded my 10.2.0.4 database to 11.2.0.1 and have to do post upgrade steps. In step 39 of Manual guideline (837570.1) is not clear for me. If some one can explain further would be appriciated. When i check my source ORACLE_HOME/ctx/admin/ctxf102.txt or ctxf102.sql
Step 39
Upgrading Oracle Text
Copy the following files from the previous Oracle home to the new Oracle home:
* Stemming user-dictionary files
* User-modified KOREAN_MORPH_LEXER dictionary files
* USER_FILTER executables
To obtain a list of the above files, use:
$ORACLE_HOME/ctx/admin/ctxf<version>.txt
$ORACLE_HOME/ctx/admin/ctxf<version>.sql
where version is 920,101,102
For instance, if upgrading from 10.2.0
*1. For dictionary files check*
*$ORACLE_HOME/ctx/admin/ctxf102.txt*
*2. Execute the script as database user SYS,SYSTEM, or CTXSYS*
*$ORACLE_HOME/ctx/admin/ctxf102.sql*
If your Oracle Text index uses KOREAN_LEXER which was deprecated in Oracle 9i and desupported in Oracle 10g Release 2, see below Note for further information on manual migration from KOREAN_LEXER to KOREAN_MORPH_LEXER.
Note 300172.1 Obsolescence of KOREAN_LEXER Lexer Type

Hi Srini
Thank you very much. now i got it.
Oracle asked me to identify the CTXCAT indexes with KOREAN_LEXER execute the following query as user CTXSYS: if nothing return then i can skip this step.
SELECT idx_name
FROM ctxsys.ctx_indexes
WHERE idx_type = 'CTXCAT'
AND idx_name IN
(SELECT ixo_index_name
FROM ctxsys.ctx_index_objects
WHERE ixo_class = 'LEXER'
AND ixo_object = 'KOREAN_MORPH_LEXER ');
SELECT isl_index_owner,isl_index_name,isl_language
FROM CTXSYS.ctx_index_sub_lexers
WHERE isl_object = 'KOREAN_MORPH_LEXER';

SLA Pre- upgrade programs and process and SLA Post upgrade

Similar Messages

Maybe you are looking for