Slackware 64 cannot run FF 5.0 - only 32 bit version available. Slackware 64 does not std have 32 compatibility libs installed. Why isn't there a 64 bit version?
For about 6 years now processors are 64 bits (from the first amd athlon). Software is more and more towards 64 bits. RAM on my machine is 8 Gb. Why not provide 64 bit FF?
I was told to just buy OEM copies but my frustration is that I'm already $200 in OS's because of the information that was provided to me by apple personnel and told by a senior tech that this still can be done.
So to say I'm going to be S.O.L and spend another $100 (for a total of $300 and 2 OS's that are usless to me; because the first time i was told that i could use Windows 8 and when the drivers did not work i was told that Windows 8 is not supported by boot camp drivers at this time so i have to go buy windows 7) I might as well return the $2,500 system and just go back to PC and get a $900 dollar PC system.
I will continue to work with the senior tech that i'm currently working with because the other issue is that OSX 10.8.1 will not except the OSX 10.8.2 update stating that it is not supported by OSX which i was told "that's strange"
Similar Messages
-
I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks
Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732
-
Running an exe from within Oracle WebLogic 10g R3 does not find dll
Hi,
I am facing a strange issue with Oracle WebLogic 10g R3.
I use the code as shown in Listing 1 below to run a windows based application exe (batch job) from within my web application hosted on Oracle WebLogic 10g Release 3.
Note that this code woks fine on Tomcat 6.x and OC4J (JDeveloper TP4).
The exec gets executed but the log of the exe program shows it could not load certain DLLs.
Note that these DLLs are in the same directoy as the Batch program and this directory is in the PATH.
Running through simple Java Program Successful*
When I run the same program from a java program it runs successfully. So this means some WebLogic environment does not get set properly.
Running directly BatchProg.exe rather than cmd.exe fails*
Also note that when I run the exe directly e.g. BatchProg.exe rather than through cmd.exe it gives me a error the system did not find the file specified.
CreateProcess error=2, The system cannot find the file specified with cause java.io.IOException: CreateProcess error=2, The system cannot find the file specified
Listing 1:*
String[] commandArgs = new String[|http://forums.oracle.com/forums/] { "cmd.exe", "/C", "BatchProg.exe \"param1\" \"param2\" " },null , l_workingDir)
Runtime rt = Runtime.getRuntime();
Process proc;
proc = rt.exec( commandArgs, envParams, workingDir );
ProcessIO errStream = new ProcessIO( proc.getErrorStream(), "ERROR");
ProcessIO outStream = new ProcessIO( proc.getInputStream(), "OUTPUT");
errStream.start(); // process any errors from the command
outStream.start(); // process any output from the command
System.out.println("Error=" +errStream);
System.out.println("Out" + outStream);
return (p_waitToFinish ? proc.waitFor() : this.SUCCESS);OK.
I have posted this on the WebLogic Forum.
Thanx. -
Printing only odd/even numbered pages does not work
I've got following problem: Printing only odd/even numbered pages does not work. Not in Preview, nor Adobe Reader. I Don't know why. i'm using a hp Color LaserJet 2550L. I just worked fine, but I cannot remember the time this failing first occured. I really hope the problem will be solved quick and easy.
Thanks so far
Bastian.Mine does not work either. I have trashed prefs, rewrote permissions, ran Disk Utility from a separate HD, etc. and I cannot get this feature to work.
I got 45 odd pages to print last night and now it won't print odd or even pages. I am reduced to printing every backside page one at a time. If I would have known about this problem before I could have saved myself an hour and just printed them all on single sided sheets. I tried to save paper and now I'm screwed (timewise)......
Any other suggestions would be greatly appreciated.
Thank You,
Dave Buckley -
I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.
The plugin shows on the list as enabled and functioning, yet the tool does not show on the toolbar. It would appear that I need to restore the previous version of Firefox and wait until a newer release of the plugin is available before upgrading the browser.I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!" -
Instant Client on 64-bit Windows 7: Driver does not appear in System DSN
Instant Client on 64-bit Windows 7: Driver does not appear in System DSN tab when creating a new Data source.
What I did so far:
I downloaded the basic and odbc zips for Window 64-bit.
Unzipped the basic zip.
Unzipped the odbc zip to the same directory.
Added the dir path to the System Environment Variable called Path.
Double-clicked on the odbc_install.exe to run it from Windows Explorer.
Then I tried to add the driver to create a new data source but it does not appear in the list of drivers.
From a cmd window, I navigated to the instant client directory and tried to run odbc_install again.
I got the message: Oracle ODBC Driver with same name already exists.
What am I missing?hello, I did it like that you say,but the result also is "oracle odbc driver with same name already exists". I don't kown what can I do it ,Thank you!
-
When you open a file from an email, you get a dialog box Open or Save this file. I wanted to save a particular file, so I clicked Save. The problem is, I had already clicked on "do this every time for files like this" so now it won't give me the dialog box back for when I just want to open a file, not save it. I have searched Options, to no avail.
'''''"always do this for thid type of file"''''' means exactly what it says: '''<u>always</u>''' .
Go to Tools > Options > Applications, locate and click on the Content Type for the item, change Action to "Always ask". This will cause a dialog to open giving you a choice of opening with an appropriate plugin for Firefox or saving the item to your hard drive. See:
*http://support.mozilla.com/en-US/kb/Managing+file+types
*http://kb.mozillazine.org/File_types_and_download_actions
'''Other issues needing your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.<br />
<br />
*Adobe PDF Plug-In For Firefox and Netscape "9.4.1"
**'''''Security update version 9.4.2 released on 2011-02-08'''''
**Info on version 10 (Reader X)"
***New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
***See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
*Shockwave Flash 10.1 r102
**'''''Security update version 10.2.152.26 released on 2011-02-08'''''
*Next Generation Java Plug-in 1.6.0_23 for Mozilla browsers
**'''''Security update version 1.6.0_24 released on 2011-02-10'''''
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''<u>Download link</u>''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml -
Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I have an Ada executable that's creating a buffer of data that's being fed to a Labview executable that's displaying the data in a GUI. We're re-architecting some legacy system hardware and I'm just trying to figure out if this configuration is even possible.
ThanksHi,
I never heard of LabVIEW6.5. I only know of LV6i, LV6.1 and LV7.0...
Why don't you just call your next/regional NI sales rep?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.
Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave -
my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in
If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.
-
I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
Thanks,
Paul
spid24s Error: 28005, Severity: 16, State: 2
spid24s An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
or you do not have permission.Hi Paul,
I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
So when his AD account got deleted, the database had NULL as owner
Using the following query I asked for the owners of the databases:
select name, suser_sname(sid) from master.dbo.sysdatabases
So changing the owner of the databases that had a NULL owner solved the issue for me.
use <databasesname>
go
exec sp_changedbowner 'sa'
Thanks for triggering the solution.
Peter -
When setting up my apple I'd I get a verification email but there does not seen to be a link to click on there is a link that says "verify now" but it's not a link the only other thing on the page is a link to apple thats starts the process all over again.does anyone have a solution for this problem?
The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.
-
my adobe acrobat 7.0 professional keeps telling me that i have to activate - I cannot do this as the information to the web site does not work. please help
Activation no longer works. A replacement download and serial number are available Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
-
I am trying to reserve an IP address in Microsoft Azure using simple PowerShell cmdlet:
$reservedIP = "MyIP"
$location = "West US"
New-AzureReservedIP – ReservedIPName $reservedIP –Label $reservedIP –Location $location
I get an error:
New-AzureReservedIP : Cannot validate argument on parameter 'Slot'. The argument "MyIP" does not belong to the
set "Staging,Production" specified by the ValidateSet attribute. Supply an argument that is in the set and then try
the command again.
Any help?
ThanksGreetings!
Please try the references below which elaborates on the usage of the cmdlet:
New-AzureReservedIP
https://msdn.microsoft.com/en-us/library/azure/dn690120.aspx
https://msdn.microsoft.com/en-us/library/azure/dn769136.aspx
Thank you,
Arvind -
How can I speed up the "start speaking" feature in iBooks? (System Preferences Dictation and speech does not do anything to the speech speed.) The rate is a bit to slow.
Hi, I had the same problem you described, and I noticed that there are two ways of activating text to speech on iBook for Mac, with different speed results (at least on my MacBook Pro Retina display)
On your iBook you can select the text and and then click on > More> Start speaking, and you will get a certain speed, which tends to be too slow.
But you will get the speed you had selected with "Go to System Preferences>Dictation and Speech>Text to speech. In there is a slider to adjust the speaking rate." if you use the TOP MENU (next to the black apple) under Edit>Speech>Start Speaking. I also learned that under System Preferences>Dictation and Speech>Text to speech, there is an option for a shortcut which is very helpful. And you can change Key. Hope this was helpful.
Maybe you are looking for
-
I can't upload my photos from my iPhone
I am trying to upload my pictures from my iPhone 4S to the computer. When I plug the phone into the USB, the message displayed says, "what do you want to do with your Apple phone" and I choose "upload photos and videos." It automatically goes to a s
-
TM doesn't recognize usual TM drive!
Hello, I just had to replace the motherboard and GPU of my iMac, but the HDD is the same. But now TM wants to generate a FULL back-up on the external drive where there already is a back-up file. Is there anyway to "tell" TM that it simply has to cont
-
Okay so like I said above, my Mozilla suddenly changed one day to showing a search box, and two different "favorite" tabs when I opened a new tab. After I set it up with my favorites and deleted the ones I didn't used I liked it a lot better and it w
-
Adobe Acrobat balks when trying to acquire and print files in Safari, doesn't happen in Chrome
It works OK when using Chrome, but in Safari the message "Before proceeding, you must first launch Adobe Acrobat and accept the end user agreement" blocks any progress, this is while an older version of Acrobat is running.
-
No transition found from state: STARTING
Hi Experts, I am doing a scenario with JMS receiver communication channel, and there is an error occurring when I send the data to JMS adapter: Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: No transition found from