Slap-back like signal when older project played

Cheers folks,
Trying to play a project created on an older system. I hear slap-back like signal when recording audio,
or playing midi keyboard. No delay heard on recently created autoload. Anyone know what I could be forgetting to set?
Thanks,
Boe

Similar Messages

My 5 is making a feed back like noise when I make calls and the person I'm calling can hear the noise.

My 5 is making a feed back like noise when I make calls and the person I'm calling can hear the noise.

will someone from HP revert? need urgent solution please!!

Playhead jumps back two beats when hitting play

Playhead jumps back two beats when I press play for one of my GarageBand projects; doesn't occur in other projects. Is there an obscure setting that will fix this problem?
This occurs whether I'm playing or recording. It occurs with or without cycle region. If the cycle region is turned on, the playhead will jump to two beats before the beginning of the region before starting the cycle playback.
"Count In" turned off.
This issue sapped my entire evening; any help would be appreciated a lot!
Using GarageBand '08 on the late '08 white MacBook4,1. OSX 10.5.8

Try resetting your GB preferences or Mac permissions files...that sometimes works for problems like yours.
http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html

The sound doesn't work. It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume. When we try to play songs, it acts like it's going to play and then goes back to the play list. Restored and still no

It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume. When we try to play songs, it acts like it's going to play and then goes back to the play list. Restored the device and still no sound.

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

HT201272 Hey I just got an iphone 4S as my 4 was stolen. I synched it and I can see all of my music but I can't get the songs to play... When I hit play it screen starts flipping thru all my music then goes back to main screen. What do I do. Thanks :)

Help! On my new iPhone 4S, I can see all of my music and vidoes that I downloaded from itunes that I had previously purchased on my iPhone 4, BUT I can not play any of the songs! When I hit "play" from my 'albums' and 'playlist' or 'songs' it looks like it is going to play the song when the song screen comes up showing the album but then the screen starts flipping from album to album or song to song randomly. Then after flipping thru anywhere from 10-15 songs, it stops and goes back the previous page showing my list of music.... I have synched my phone, restored it and downloaded all of my music and videos. The only things I can get to play from my iPod on my iPhone 4S is my videos, no music. Can anyone help me? I have been trying to figure it out for days and I am a bit frustrated. Thanks in advance for any help I may receive.

Basics from the manual are restrt, reset, restore.
Have you tried each of these?

10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will i have to continue using the previous version to complete older projects?

Final Cut Pro X 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will I have to continue using the previous version to complete older projects? the only foreseeable solution is to begin any new projects on 10.2 or importing footage on 10.2 and starting form scratch--which is something i definitely don't want to do or have time to do. ANY advice, thoughts, or opinions would be greatly appreciated! Thank you!
Running 10.10.3 // MacBook Pro (Retina, 15-inch, Early 2013) // 2.4 GHz Intel Core i7 // 8 GB 1600 MHz DDR3

Exactly the same problem with me.
Some other threads advice to remove fonts, clean the caches, remove add ins but nothing works consistenty, for some it looks like it works, for me it failed.
What I did not try yet, was to move the Render files out of the malicious library to trash.

My iPod touch shows my podcasts "grayed out". They're there, but I can't play them. My older iPod plays them fine like normal.

My iPod touch shows my podcasts "grayed out". They're there, but I can't play them. My older iPod plays them fine like normal.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all podcasts and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

IDVD project plays perfectly in preview but when burned NO AUDIO.....

The iDVD (v 6.0.2 )project plays all video and menus/buttons perfectly in preview but when burned to NO AUDIO except on menus, none in the AUDIO TS folder, none on main video which has 11 chapters exported from FCP 5.0.4 as QT w/chapters.
Also the burned DVD has scrambled the links from the Scene selection menu to the correct video chapter.
I've checked all the media for 16 bit, etc.
WHY does it play fine on the simulator but screw up so badly when burned to disk.
any help would be appreciated, THANKS in advance
Gerry
Power Mac G4 Mac OS X (10.4.6) Dual 1.2 gHz 1.5 GB RAM 120GB, 160Gb, 200Gb SATA HDs
Power Mac G4 Mac OS X (10.4.3)

I had the same problem with my music not playing once I burned my iDVD's.
What I figured out, was that whenever I download music from iTunes, and try to use the music within my iDVD program, there's a little lock that appears in the iTunes file of the song I'm using. No one knows why...I spent hours on the phone with Apple trying to figure it out. So, the file is locked, and will play on my computer when I view my show, but will not play once burned, and I try to play it on the TV.
So, my work around is that every single song I purchase from iTunes...I have to burn onto a CD, and then burn back into my iTunes. That creates an unlocked file, and I am now able to use it.
I don't know if this is the same problem you are having...but it's a huge headache as I create these iDVD's a LOT for my business.
It basically stinks, and there's no fix - according to Apple...

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Everything in your project will be exported when you use the share menu.
If you want to export only half, I suggest that you
1) Select the project in the Project Library.
2) Click FILE/DUPLICATE PROJECT
3) Give the duplicate a name, like Project A snippet.
4) Open the duplicate project in the Project editor and delete the segments that you do not need.
5) Then Share.
You mentioned surrounding a portion of the clip you were editing in Yellow. Once you do this, you should right-click and then select either DELETE SELECTION, TRIM TO SELECTION, or one of the other options available. That is a key tool in editing.
You mentioned MPEG Streamclip. I agree that MPEG Streamclip is a great tool.

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?
A little background info. I use Captivate 7 and currently have over 100 projects that I maintain on a quarterly basis. I publish using the SWF format and upload the swf/htm files to a server where they are then accessed from a few locations (within our online documentation, in our software product, on two different websites). Many of the projects are linked so some will be viewed as a series and others viewed as a standalone video. Each video uses the same template and includes an intro and end slide. Now my organization wants to implement a new intro to all videos (those I publish and those from several groups across the organization). My current intros provide overview material for the specific video so the new intro, which is an animation with audio in mp4 format, would need to be placed at the start of each project. The issue is, the intro adds 9 seconds to every video and in many cases doesn’t add any value (say, if a user accesses the video from within our product or views the videos as a series). I’ve talked it over with my boss and we want to try to add the intro only to videos accessed from site X, not any other location. So now to my question. Is there a way to play an external mp4 file (intro) only when the published project is accessed from a specific site, therefore eliminating the need to update each project? Maybe there's a way to add a parameter or variable to the URL or the html code?
Thanks in advance for your suggestions. Please let me know if you need additional information.

AimeeLove,
I have a solution for you. You may have to modify the code a little bit based on how long the timeline animation is for your clock. I based mine on 3 seconds to complete a minute hand sweep around the clock.
Milliseconds for each point on the clock:
12 = 0
1 = 250
2 = 500
3 = 750
4 = 1000
5 = 1250
6 = 1500
7 = 1750
8 = 2000
9 = 2250
10 = 2500
11 = 2750
In the mouseover section for 12 o' clock, put this code...
myVar = setInterval(function(){
     var pos = sym.getPosition();
     if (pos > 0 && pos < 50){
          sym.stop(0);
          clearInterval(myVar);
},10);
When you point to the time, the setInterval method loops every 100th of a second and checks the current position of the timeline. When the timeline reaches the range between 0 and 50 milliseconds (almost impossible to hit 1 specific point), the timeline will stop at 0. Also, the clearInterval will be fired to stop the loop.
In the mouseout section, put this...
sym.play();
clearInterval(myVar);
It start the clock again, and it also clears the loop in case you mouseout before you reach the range.
Make sure that myVar is a global variable so you can clear it from the mouseout section.
Repeat this for each point on the clock. To avoid potential conflicts, you may want to use my12, my1, my2, etc. instead of myVar. I put the milliseconds at the top that you would use as the beginning of the range. 50 milliseconds should be enough to catch it. So, for 5 o' clock, you would make your range between 1250 and 1300.
Let me know if you have any questions. Thanks!
Fred

How do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it when you just play a slideshow.

how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.

If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
          if ims is {} then return {}
          if (length of ims is 1) then return {}
          if i < 2 then return rest of ims
          if (i = length of ims) then return (items 1 thru (i - 1) of ims)
          if i > (length of ims) then return ims -- should be error?
          return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
          local numitems, ims_shuffled, nextrest, nextpick, i
          set numitems to length of ims
          if length of ims < 2 then return ims
          set ims_shuffled to {}
          set nextrest to ims
          repeat until nextrest is {}
                    set i to (random number (numitems - 1)) + 1
                    set nextpick to item i of nextrest
                    set beginning of ims_shuffled to nextpick
                    set numitems to numitems - 1
                    set nextrest to removeItem(nextrest, i)
          end repeat
          return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
          local imageSel, shuffled, i
          tell application "Aperture"
activate
                    set imageSel to (get selection)
                    set shuffled to my shuffle_items(imageSel)
                    set fullscreen to true
                    if imageSel is {} then error "Please select some images."
                    repeat with i from 1 to count of shuffled
                              reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
                    end repeat
                    set fullscreen to false
                    return shuffled
          end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
                    tell library 1
                              if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
                              end if
                    end tell
And to add the images from the shuffled list to the album:
                    repeat with i from 1 to count of shuffled
                              duplicate item i of shuffled to album "shuffledAlbum"
                    end repeat
Regards
Léonie

TS1702 After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

Where can I see the downloads LIST when downloading podcasts, like in the older version of iTunes? I find it frustrating that I see only one at a time now ! Any suggestions please?

Where can I see the downloads LIST when downloading podcasts,
like in the older version of iTunes? I find it frustrating that I see only one
download at a time now ! Any suggestions please?

Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo

Why is my macbook DVD player no longer playing commercial DVD's that it used to play perfectly? It reads the disc, but then says not permitted when I hit play. It is much older than 12 months warantee so I hope there is an easy fix?

The macbook reads a disc, and opens up DVD player but then says not permitted when I hit play, or any other button. Sometimes the initial music plays, but the screen remains black and then it all stops. These are shop bought DVD's that have previously worked on here, and work in DVD players, but have suddenly stopped. The computer is much older than the12 months warantee so I hope there is an easy fix? Thankyou!

Three things you can try:
1. Clean the superdrive with a proprietory CD/DVD lens cleaner that uses tiny brushes.
2. Perform an SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379
If you are using a Wireless Keyboard:
http://support.apple.com/kb/TS3273
3. Try the free DVD player VLC:
http://www.videolan.org/vlc/
which performs better than the built-in DVD Player.

I cant seem to open some photos on Iphoto. I downloaded like 3 months ago from my phone into the iphoto. I could access ALL of my photos back then but when I try and access them now I cant seem to open the file

I cant seem to open some photos on Iphoto. I downloaded like 3 months ago from my phone into the iphoto. I could access ALL of my photos back then but when I try and access them now I cant seem to open the file. When i open iphoto and open the folder thats on it, i can see ALL the photos that are there but when I click on different ones some appear in the larger screen but A LOT of them dont appear. Iphoto seems to have erased the file or I dont know.
Also I tried clicking on the photo that doesnt appear and making it "Reveal it on finder" - "original file" and it says 'The operation can’t be completed because the item can’t be found.".
I really want those photos because they involve a really special family vacation, please help me find those photos

A LOT of them dont appear.
What do you see in the window when you click on those? A blank, black window? An exclamation mark? What?

Slap-back like signal when older project played

Similar Messages

Maybe you are looking for