Slate 21 ethernet configuration need to re-save after reboot

I have also the same Problem and no solution: the static Ip is always still written in the ethernet menue, but I have to confirm/save ist again, to obtain the previous working LAN-connection. It makes it hard to turn off the Slate 21, because than it always "forgets" ist Lan-Connection. Hope ther is a fixing possibilty?

Hi wariemy,
I saw your post and I will be happy to help. If I understand you correctly you are using an Ethernet connection and have manually configured the IP Address and DNS Gateway. Check out the link below it is on setting up an Ethernet connection. Make sure that you have Obtain IP Address Automatically unchecked.
Connecting to a Network:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03912143&tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=5381152#N502
Thank you,
 

Similar Messages

  • Settings changed wont save after reboot

    Any changes that i do in my Mac, wont save after reboot.
    If i change the settings on my mouse (unchecking Scroll direction) next time i reboot, it will be checked again.
    Any changes that i do to my Finder sidebar (like adding My Main Drive not visible, add downloads and pictures, change the foler view as columns) they are all gone after i reboot. Its getting freakin anoying. I Google for a solution but to find none.
    When trying to opening Calender, it says that i dont have permission. I have gone to the application and checked and made sure that all acounts have r/w permissions.
    On the Dock, i uninstalled an app and next reboot i will get a question mark, even tho i removed it before it comes back after the reboot.
    Thanks for listening.
    Burn1nator

    May sound silly, but are you sure you're not logging in as the 'Guest' user? What privileges does the user account you're using have? Check in
     > System Preferences... Users & Groups
    that the account you're using is Admin. If you're using a Standard account, are parental controls enabled?
    If you are admin, try resetting your permissions and removing the sys pref property file. Before you do that, backup your system and user data. Once you're backed up, open Terminal and copy/paste the following into the Terminal window:
    rm ~/Library/Preferences/com.apple.systempreferences.plist
    hit 'return'. If the prompt returns without an error (as it should), paste this
    sudo chown -R `id -un` ~
    hit 'return'. Enter your password as requested, but type carefully as it will be invisible while you do.
    This will take a while, but after the command finishes (i.e., when the prompt returns), restart the mac.
    After the restart, set the mac up the way you want, then test whether the problem is fixed by restarting again to see if your changes were kept.

  • Compressor custom settings will not save after reboot

    I am having a problem with compressor removing my custom settings after I restart the program. I will save a custom format and it will show up in the custom folder however as soon as I close compressor and restart it shows 0 in the customer folder. I am guessing this is a bug in the new version but does anyone have any ideas? Also where do I submit a bug for compressor? Thanks

    I, too, have been experiencing this for quite a while in Compressor 3.  I upgraded to Compressor 4 this week, thinking that that, might solve my problem, but no.  Same thing is happening in Compressor 4.
    I have trashed my preferences, but still no luck.
    very frustrating.

  • OIF-Logout configuration- Need clarification

    Could someone please highlight what are configurations need to enable logout for Oracle Identity Federation. Is it just as simple as invoke URL: /fed/user/logout.
    Should this URL be invoked from SP host or IdP host?
    Thanks

    To configure Logout at SP side.
    ===================
    1. Go to Fusion Middleware Control and navigate to the Oracle Identity Federation instance.
    2. Navigate to Administration, then SP Integration Modules. Click the Custom SP Engine tab.
    3. To modify an SP integration engine, select it and:
    *Enable logout engine
    *Set "/logout.jsp" as the Logout Relative Path of the SP integration engine
    4. Save your changes
    Implementation of logout.jsp
    <%@page buffer="5" autoFlush="true" session="false"%>
    <%@page language="java" import="java.net.*"%>
    <%
    response.setHeader("Cache-Control", "no-cache");
    response.setHeader("Pragma", "no-cache");
    response.setHeader("Expires", "Thu, 29 Oct 1969 17:04:19 GMT");
    request.getSession().removeAttribute("feduserid");
    request.setAttribute("oracle.security.fed.sp.engineid", TEST_ENGINE_ID);
    request.getSession().getServletContext().getContext("/fed").getRequestDispatcher("/user/logoutretsso").forward(request, response);
    %>
    =====================================
    Launch the logout process by accessing a URL of the form:
    http://hostname:port/fed/user/logout?returnurl=http%3A%2F%2Fanotherhostname%2Fpath
    The logout service takes a returnurl parameter, which is necessary for correct operation; the user will be redirected to this URL after the logout process completes.

  • In an iPhone 3GS (or 4G), can a user configure the WiFi power-save to extend battery life?

    In an iPhone 3GS (or 4G when I upgrade), can a user configure the WiFi power-save operation to extend the battery life?  For example:  Can a user turn on/off WiFi power-save operation?  Can a user specify WiFi sleep duration?  Thanks in advance for any helpful advice.

    Yikes!   Thanks, Templeton.  Do WiFi app programmers have control over power-save settings?  For example, can a first VoIP app be more energy-efficient than a second VoIP app?

  • Vonage, dsl and airport configuration need help!

    Vonage is not Mac proficient. I cannot get a technician on their end to help me connect the router they sent me to configure it to work with my airport base station and dsl modem. Is there anyone out there who is actually up and running wirelessly via airport extreme base station with a Zyxel P-660R modem from Earthlink DSL with Linksys RT31P2 broadband router from Vonage?

    From a quick google, it looks like you should take the ethernet connection from the Zyxel into the RT31P2's "Internet" port. Connect a second ethernet cable between one of the RT31P2's LAN ports and your Airport base station. Set the Airport as a bridge--connect using Ethernet, configure using DHCP, don't distribute IP addresses.

  • Configuration needed for SOA call to create PO in classic scenario

    Dear Experts,
    We are working in the SAP SRM 7.01 with backend system on ecc 6.0 Enhancement pack 5. The scenario configured is classic scenario.
    I want to know what are the configurations needed to use SOA calls to create a purchase order in the backend system.
    In the system landscape directory, when I use the system type "ERP_3.0" for backend system, the system uses the BAPI 'BAPI_PO_CREATE1' to create a purchase order in the backend system.
    When we use the system type "ERP_4.0", it does not use the BAPI 'BAPI_PO_CREATE1' to create purchase order. It tries to use SOA calls to create PO in the backend system. However, it fails to create one.
    Could you please let me know what are the settings we need to do to create a purchase order in the backend system?
    Thanks and regards,
    Ranjan
    Ranjan Sutradhar

    Hi Vardhan,
    Can you be a little clear? are you using PDP scenario as in your requirements are coming as PR from ECC into SRM as SC? Is this the scenario?
    Regards,
    Nikhil

  • What are the configuration need between R3 and XI when we use RFC sync adap

    hi,
    What are the configuration need between R3 and XI when we use RFC sync adapter.
    Regards
    siva.

    if its the sender adapter ref:
    RFC adapter
    Sender- /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
    Receiver;
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
    Also;
    trouble shooting rfc/soap -
    /people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009

  • I need to print save the date magnets that are 8.5x5.5 but I can't seem to align the printer / paper

    I need to print save the date magnets that are 8.5x5.5 but I can’t seem to align the printer / paper to print correctly!! HELP!

    Please read this post then provide some details.  What printer model? What operating system? What program are you using to print?
    How thick are the magnet sheets?  I would expect most printers would have trouble feeding this material.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Any special configuration needed for Print PDF?

    To print as PDF is there any configuration needed to be set.

    Hi,
    the only thing to pay attention is when you have to print large PDF and you receive this error: AGEGTYVF.
    Refer to this doc in the Oracle Support: Printing A Large OBIEE Answers Report Or Dashboard To PDF Fails With Error Code: AGEGTYVF
    Regards,
    Gianluca

  • For showing smartforms through dynpro,Is there any ADS Configuration need ?

    Hi,
    I am showing smartform through dynpro application . So Is there any adobe document service configuration need for same.Please provide details if possible.
    Regards,
    Gurprit Bhatia

    Thanks Arafat and Amit for quick answer,
    I am working one application in which i am showing smartform through dynpro. In development this application shows Smartform as PDF but When i try same application on Quality or Production . It does not show anything means pdf does not generated.Is there any note for that.
    Regards,
    Gurprit Bhatia

  • What configuration needs to be done so that the requirement appears in CPPR

    Dear Experts,
    What configuration needs to be done for a product category so that it appears in CPPR?
    I was running a test scenario where the Product category was relevant for CPPR. However, after the creation of the Purchase requistion, I could not find the requisition in SRM SOCO to assign a source of supply/
    Thanks and regards,
    Ranjan

    Hi
    what are the configuration existed in ECC for transfering PR to SC or BID Invitation ?
    did you do sourcing configuration for this material group?
    Hope you might done XI configuration to connect SRM and ECC ?
    Muthu

  • Do I need Safari Power Saver ?

    Hi.
    Do I need Safari Power Saver on an iMac ?
    As it doesn't operate on batteries ...
    Thanks .

    Thank you very much.
    All the best !!!!

  • BASIS Configuration needed to send an external mail from SAP Program

    Can you please help me about the BASIS configuration needed to send an external mail from SAP Program?
    Regards,
    Subhasish

    Hi Subhasish,
    Please go thru the below link.
    Re: SCOT Configuration--for external mail
    Regards,
    Lakshman.

  • Configurations needed for Proxies.

    What are the all configuration steps for using a Server proxy.?

    Hi Soumyasanto Sen ,
    Proxy generation converts non-language-specific interface descriptions in WSDL into executable interfaces known as Proxies. Depending on the target programming language, you choose one of the following:1. Java Proxies. or 2. ABAP Proxies.
    We can interface to XI  through proxies. From WAS 6.20, proxy generation feature enables application systems to communicate with XI using proxies. Proxy generation enables you to create proxies in application systems. Proxies encapsulate the creation or parsing of XML messages and the communication with the relevant runtime components required to send or receive the messages.
    There are two types of Proxies.
    1. Java Proxies.
    2. ABAP Proxies.
    Java proxies are used when java applications needs to send and receive data and ABAP proxies are used when ABAP applications needs to send and receive data.
    The following websites contained detailed explanation (PDF & PPT docs) on Configurations needed for Proxies:
    Proxy Generation
    http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
    ABAP Proxy Runtime
    http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
    To activate ABAP proxies
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    Detailed step-by-step solution for ABAP proxies in XI
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    ABAP Server proxies
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    Debugging of Inbound ABAP proxies
    /people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
    File to R/3 via ABAP Proxy
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
    How to push data from BI to XI using proxy
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
    How to push data into BW from XI using proxy
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    cheers!
    gyanaraj
    ****Pls reward points if u find this helpful

Maybe you are looking for

  • Can't install network printer.. Drivers won't install

    I am currently upgrading my Window XP pro machines to Windows 7 Ultimate "32 bit" I have software on the workstation that is VITAL to operation and no longer available for download and media is destroyed. I was successful in upgrading to Vista 32 and

  • NO SOUND with iMAC 24 - Please help

    I have tried everything.........searched for drivers, everything, installed boot camp drivers from the CD numerous times.........I can't get rid of the ?pci device that shows up in the device manager. I am using windows xp sp3. The ? still shows up i

  • Making a clock with hand pointers

    Hello macromedia flashers. im thinking of making a simple clock design and adding hand pointers that tell the time.but im no action script fan and i have a few questions to ask. a)how hard is it to add action script to the hand pointers? b)can i use

  • How can I do this by DECODE

    select ser_no,accode,credit,debit,'JV',decode(accode,2102650,(credit>0),'Y',NULL) from table_nameI got    SER_NO ACCODE     CREDIT     DEBIT 'J D         1 7060230         0     23177 JV         2 5110200     28855         0 JV         3 2102650     

  • Upgradeing from ios 4.2.1 to ios 4.3.3 ipod

    can i upgrade from ios 4.2.1 to ios 4.3.3 on a ipod if so how do i do it