Slatebook x2 - USB flash and SD card at the same time

Hello, after almost two years of using this device I had a situation when I wanted to connect USB flash drive and a SD card at the same time (I wanted to copy files from SD to the USB flash drive). I connected the SD card (standard size) to the keyboard module. It was mounted OK. Then I connected the USB flash drive to the keyboard module. This was not mounted at all (no error message). When I dismounted the SD from storage menu then the USB flash drive was mounted automatically. I tried various orders of connecting the devices. I managed to get them work at the same time but then suddenly the USB drive was dismounted. I did not try to perform factory reset (please do not ask this for every issue, I have quite apps, files and settings on the device). It does not matter if the Slatebook is connected to power source. The Slatebook software is fully updated.note: The USB flash drive and the SD card works without any problem when only one of them is connected. Does anyone use SD card and USB flash drive at the same drive? Does it work for you?

Audio Hijack Pro <http://www.rogueamoeba.com/audiohijackpro/> lets you take the audio output from any application and add multiple effects. Using the "Auxiliary Device Output" effect will send the audio to more than one device.

Similar Messages

How to record a USB mic and a guitar at the same time?

I have an Audio-Technia AT-2020 USB mic and an Ovation acoustic/electric guitar. I wanted to record both of them at the same time, so i plugged the mic into the USB port (duh!) and the guitar into the 1/8" port on the computer (with a 1/4" to 1/8" adapter and a male/male headphone cable). However, when i went to select the inputs for the diffrent tracks, it was either one or the other. My question is, do you need an audio interface to be able to do multitrack recording? If so, could I use a USB hub, 1/8" to USB adapter, and plug both the guitar and mic to fool the computer into thinking i have an audio interface? I would rather not spend money on an audio interface ($200) and a new mic ($120) when i already have something that could work!
Thanks to anyone who can help!

beberhard14 wrote:
do you need an audio interface to be able to do multitrack recording?
create an aggregate device from the mic and line-IN:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
(Let the page FULLY load. The link to your answer is at the top of your screen)

Lightroom Flash and HTML galleries (at the same time)

I cannot find any reference to such a thing but it would be great if when creating a Lightroom Flash gallery that there was the option of simultaneously creating a HTML gallery too which references the same image folder content (choice of large, medium or small) as I have situations where clients machines or bandwidth prohibits browsing on Flash galleries and where it would be good having the HTML option.
Thanks, Jeremy

Ngarraud,
Try this:
*Multicast Rate / Transmit Power*
Launch Airport Utility.
Select your Time Capsule on the left.
Click "Manual Setup".
Select "Airport" from the toolbar at the top.
Click the "Wireless" tab.
Click the "Wireless Options..." button.
Check the setting for "Multicast Rate".
This setting controls the range at which you allow devices to access your network. Lower is better if you want access throughout the house. But this setting won't improve speed. Tesserax has a nice explanation of this setting in the following quote:
+"The Multicast Rate option sets the threshold throughput level a wireless client must obtain in order to be "accepted" by the base station. The lower this value, theoretically, the greater number of clients that can connect, especially those at greater distances from the base station. At the opposite end, the higher this number, only those wireless clients that can achieve the higher throughput value will be able to connect.+ [http://discussions.apple.com/thread.jspa?messageID=6736587]
Next, verify that your "Transmit Power: is set to 100%.
*Interference Robustness / Use Wide Channels*
Finally, ensure that "Interference Robustness" is checked (For certain network configurations this setting will say "Use Wide Channels. Verify that it is checked nonetheless.)
Help Doc states: +"You may experience network performance problems if a microwave oven or other source of interference is used frequently near your base station or Time Capsule. To help minimize interference, turn on interference robustness."+
Let us know if this was helpful.
Cheers!

Connecting Micro USB and HDMI cables at the same time

I need to be able to use a Micro USB and HDMI cable at the same time to configure ATV to connect to WPA2-Enterprise secure WiFi network. I'm using Apple Configurator to do this. Because of the poor hardware design, it isn't possible to connect both the Micro USB and HDMI cables at the same time. Does anyone have a worrkaround to resolving this issue?
I saw a similar post about this problem in the forums dating back to April 2013 with no real solution. It's been over a year now and I'm hoping someone has found a workaround to this problem. I have a bunch of ATVs that I need to configure for our classrooms.
Thanks!
MG

For what reason do you believe this is necessary?
How to Install a Configuration Profile: http://support.apple.com/kb/ht5437

Importing more than one Memory Card at the same time

As a productivity tool for professionnals, Lightroom should allow us to import from more than one source at the same time, as Aperture do. I have a multiple Flash Card reader, and we cannot import all of them at the same time in Lightroom...
I know that I can copy them in a folder, then importing them in LR... But this is time and space consuming if I want to convert the file in DNG : it's okay if photography is a hobby for you, but when it's your full time job, and you often import 4 16Gb Compact Flash Cards at the same time, you don't want to waste time to wait the copying process on your hard disk, and then wait for the "import and convert to DNG" process : this process require to duplicate the files : RAW to DNG on the same hard disk, instead of Direct copy and convert to DNG from your memory cards to your Hard Disk.

You can have multiple remotes for one ATV, and one remote for multiple ATVs.
In our house we have two iPhones and one iPod iPod Touch, all able to control the same ATV at the same time (much to the delight of my daughter who enjoys ousting my music choices for her own).
Why have iPod touch in each room? Its not a wired remote - its a mobile device. Think of a landline vs mobile telephone - landlines are one per room, mobiles are one per person - that's how an iPod is used, even as a remote - you take it with you.
Just like a mobile phone, you'd have one personalised iPod Touch or iPhone per person, not per ATV or room.

Hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me

hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me?

RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Problem connecting Firewire device and external HD at the same time

Hi. I'm attempting to record digital audio through a Presonus Firepod A/D interface via a Firewire 400 to 800 cable connected to one of the Firewire 800 ports on a mid-2010 Mac Pro running Snow Leopard.
The problem is that if I have an external HD connected to one of the other Firewire 800 ports on the computer and powered on at the same time, the connection to the Presonus Firewire device is not recognized by the Mac Pro. Not only that, performance of the Mac Pro is affected adversely and System Profiler is unable to list any Firewire devices. If I turn the external HD off, the Presonus device is recognized and listed in System Profiler and the machine runs fine. I'm able to connect two external hard drives via separate Firewire 800 ports on the Mac Pro and both drives mount w/ no problem. It's only when I try to connect one of the external HDs and the Presonus audio device at the same time that the problem occurs.
I used this same arrangement on a PowerMac G5 running Tiger w/ no problems whatsoever. If the 400 to 800 cable is bad, I would think it wouldn't work at all, but it does when only the Presonus Firepod is connected and powered on. Any ideas?

Have done more research and apparently this is not an uncommon problem: overloading the Firewire bus when connecting an audio device along with an additional device like an external hard drive. As I understand it now, audio signal is a bandwidth hog and the solution is to get a Firewire PCIe card which will have its own independent Firewire bus and which I'll use exclusively for my audio device.

Getting Logic master to send to both 1-2 and 3-4 at the same time

I have an native Instruments Audio Kontrol 1 'sound card' that I'm running 2 different sets of M-Audio monitors off of. My question i, can I run the master output to both 1-2 and 3-4 at the same time so I can easily check mixes on both sets of speakers without changing every single tracks output?
Also, is this possible to do in iTunes also? I can find nothing in Logic (or anywhere) that will allow this and I initially thought my device was broken until I simply choose 3-4instead of 1-2.
thanks so much!

Pancenter wrote:
Sampleconstruct wrote:
In Logic you could just setup additional sends of your Audio tracks using the send knobs and send the signal to a Bus. Set the outputs of that Bus to 3-4 and you'll have your signal played through 1-2 as well as 3-4.
Also, if any of the audio tracks used sends (reverb on a bus..etc) those would also have to be sent to the same bus as the audio tracks.
panleft-
How about routing all the outputs that are currently on Output 1-2 to a bus first then:
Option 1: Switching that bus's output between outputs 1-2 and 3-4 (for A/B comparisons)
or
Option 2: Use the Send on that bus's output to another bus, route that second bus's output to 3-4 (so both busses are sending audio to both sets of speakers simultaneously).
As an alternative, the Mackie Big Knob is a great hardware solution for routing a signal to 3 sets of speakers, allowing you to switch among them with simple button presses.
-droo

My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black

My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!

Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!

G41TM-E43 - DVI and HDMI output at the same time?

I am looking to output to 2x 1920x1200 displays...nothing 3D and nothing that needs to be decoded...just some power point presentatinos and some flash within a browser window.
I am pretty sure the resolution isn't going to be a problem, but using both the DVI and HDMI ports at the same time is something I am concerned about. I am looking for people with actual knowledge that this works...no guessing please.
Regards,
Dan

Quote
I am looking for people with actual knowledge that this works...no guessing please.
The likelihood is that you won't be able to use DVI & HDMI at the same time, but you could use one or the other in conjunction with the VGA (D-Sub) port.
But as this is a user-to-user forum, and you may have to wait for someone with actual experience of this to see this thread and respond, for a definitive answer, contact MSI Support direct:
http://support.msi.com
But please do post back with the answer, as this could be useful for others in the future with the same question.

Thinkpad 8 - Power and Wired Ethernet at the same time?

Hi. I am looking for a way to have Power and Wired Ethernet at the same time?
I have been looking at USB 3.0 micro cables with a dual USB ports - one for power and one for ethernet (via USB adapter) - but I can't get that to work.
Has anyone tried this? Or found a solution to this?
Thanks!

Lenovo sells a y-cable for the TP8 that does this. Look here. I've not been able to find any cheaper alternatives so I just ordered one of these myself.

Bluetooth keyboard K810 and mouse T630 at the same time, repeating keys and mouse starts to stutter

I use a Lenovo Thinkpad Tablet 2, Windows 8.1(core edition), x86 (32bit).
If I pair a Bluetooth keyboard K810 and mouse T630 at the same time, with Wifi On, the keyboard starts repeating the keys and the mouse starts to stutter. Especially if WiFi is under load (when downloading something).
This doesn’t happens if I pair only the keyboard, or if I pair mouse and keyboard with Wifi OFF.
If I pair a Bluetooth keyboard and use a USB mouse with Wifi ON, everything works fine.
If I pair a Bluetooth mouse and use a USB keyboard with Wifi ON, everything works fine.
I think it is an issue with two Bluetooth devices paired at the same time with Wifi ON.
So here is a summary:
BT mouse and BT keyboard / Wifi ON ----> repeating chars and the mouse starts to stutter (bug)
BT mouse and BT keyboard / Wifi OFF ----> works fine
Only BT keyboard / Wifi ON ----> works fine
Only BT mouse / Wifi ON ----> works fine
USB mouse and BT keyboard / Wifi ON ----> works fine
USB keyboard and BT mouse / Wifi ON ----> works fine
Where is the problem? Is there any solution?
Solved!
Go to Solution.

I have solved the problem. In the Wlan-Drives-Settings there is the "Bluetooth Collaboration" option. I put the value to "Disable" and now works everything like charm.
Best regards, jC
Broadcom manual:
Bluetooth Collaboration
Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.

2 differents graphic cards at the same time for Mercury engine

Hi !
I'm working on 4K footage (R3D) with CS6 Premiere and Blackmagic Resolve, on a 6-cores i7-3930K (without integrated graphic card inside the CPU).
I decided to buy 2 graphic card, because Resolve "need" one simple graphic card for the software interface (GT610 1Gb with 48 CUDA cores),
and one strongest for the calculation (GTX680 4Gb with 1536 CUDA cores).
So I'd like to know if Premiere is like Resolve and if it will use the dumb card for the software, and the second for the CUDA engine inside MPE ?
Or will it use the 2 cards at the same time, like 48 + 1536 = 1584 CUDA cores ?
Or will it use only one of those 2 card ? And in this case, how can I chose the right one ?
(modify a configuration file, or put the strongest card in the first PCI slot in exemple ?)
Thanks for your help. ; )

Thank you John !
Ok, I read those thread... so, to summarize (and to be sure I understood everything) :
1) Premiere don't work with 2 GPU at the same time (no SLI / no 2x graphic card "alone").
2) I need to install the strongest graphic card (used in MPE) in slot 1, and the second graphic card (connected to my DVI displays) in slot 2.
3) I have to be really careful with drivers (but it's the same manufacturer, EVGA, and the same line, GT and GTX, so I don't think there will be problems)
and if I have problems, just need to desactivate the CUDA processing (in the drivers panel) of the card just used for the displays.
Can you just confirm me I'm right ?
(And, about Resolve, I saw the same slot configuration on the manual, so I hope everything will work : )
MAC PRO SLOT CONFIGURATION Optimum two GPU configuration
Slot                    Board                                            Function
4                        HBA or RAID card                          Storage interface
3                        Capture card                                  Video & audio I/O
2                        Single width GPU                          GPU for GUI
1                        Single or double width GPU          GPU for image processing

My ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!

my ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.

You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

Bash script: Rotate your wallpaper and SLiM theme at the same time

EDIT;
I've decided I should really thank Cerebral for his help with writing this script; this thank you should have been here from the get go.
After writing:
#!/usr/bin
echo "Hello World!"
I wrote a script to rotate my fluxbox background and SLiM theme at the same time, so I could have a contiuously changing background and still have a smooth transition from SLiM to fluxbox. (It just looks so much cooler when both have matching backgrounds). By the time you finish reading it, and configuring your box so it will work, you will probably have decided you could have writtin your own, better script to do the same thing. But, on the off chance anybody finds use for it, here it is:
(this should be obvious, but: don't run this script without at least reading the comments)
#!/bin/bash
#this is a script to rotate a number of backgrounds
#to be shared by the fluxbox desktop and SLiM login manager.
#it is the first meaningful script I've written. It may be
#freely distributed and used with the understanding that you are
#using it at your own risk.
#Before running this script you need to check that your SLiM
#themes are installed to the path /usr/share/slim/themes, which
#is the defulat path for installation in Arch. Here are some
#other things you need to set up:
#1. create (if you don't have it) the directory /usr/share/wallpapers
#2. create a wallpaper in /usr/share/wallpapers called 'dummy' by copying
#you current wallpaper to that filename
#3. set your window manager to display the wallpaper 'dummy', this works fine
#using a style overlay in fluxbox, I haven't tested it with any other window
#manager, but I don't see why this would cause a problem.
#4. create a directory /usr/share/slim/themes/current, you can copy one of
#your slim themes into that directory if you want. (this will prevent you
#from seeing some error messages the first time you run the script)
#5. define the names of the themes you want to rotate, in order for this
#script to work, you must name them "themeNUMBER", where NUMBER is replaced
#by an integer. Your themes must be numbered consecutively, start with 1
# that is:
#theme1 , theme2, theme3, etc. , theme305
#If you don't number consecutively, this script will not run properly. You
#must also define the total number of themes as "rotate_number"
#6. Check if the script runs, if it does, you should change /etc/slim.conf to
#use the theme "current"
#7. This theme will now rotate your SLiM theme and wallpaper in such a way as
#to make them match each other. Note that SLiM will not let you change themes
#"on the fly", (as of July 6, 2008), so changes will not be apparent unless you
#restart SLiM. I run the script before I run slim in my etc/rc.local local
#script, so each time I reboot I get different wallpaper / login background.
#Fred Drueck 2008
#Define here all themes to be rotated and the total number of
#themes to rotate:
rotate_number=9
theme1=/usr/share/slim/themes/default
theme2=/usr/share/slim/themes/lake
theme3=/usr/share/slim/themes/lunar
theme4=/usr/share/slim/themes/flower2
theme5=/usr/share/slim/themes/the-light
theme6=/usr/share/slim/themes/mindlock
theme7=/usr/share/slim/themes/parallel-dimensions
theme8=/usr/share/slim/themes/wave
theme9=/usr/share/slim/themes/fingerprint
#check you are running this script as super-user:
if [ $(id -u) != "0" ]; then
echo "You must be the superuser to run this script" >&2
exit 1
fi
echo "rotating themes"
#figure out which theme is currently set, then name it as the variable
#"last theme number", otherwise set last theme number as 0
if [ -f /usr/share/slim/themes/current/current_theme_number ]
then
echo "checking current theme"
cd /usr/share/slim/themes/current/
eval last_theme_number=$(cat /usr/share/slim/themes/current/current_theme_number)
echo $last_theme_number
else
echo "no theme is currently set, using theme 1"
last_theme_number=0
echo $1 > /usr/share/slim/themes/current/current_theme_number
fi
#set the new theme number
eval new_theme_number=$(($(($last_theme_number % $rotate_number))+1))
#select the new theme
placeholder=theme
eval new_theme=\$$placeholder$new_theme_number
echo $new_theme
#now clean out the "current" theme where I keep the current
#theme for slim
rm /usr/share/slim/themes/current/background*
rm /usr/share/slim/themes/current/panel*
rm /usr/share/slim/themes/current/slim.theme
#the wildcards are there since the themes use jpg and png files
cp $new_theme/background* /usr/share/slim/themes/current
cp $new_theme/panel* /usr/share/slim/themes/current
cp $new_theme/slim.theme /usr/share/slim/themes/current
#increase the theme number, but first clear the old file
rm /usr/share/slim/themes/current/current_theme_number
echo $new_theme_number > /usr/share/slim/themes/current/current_theme_number
#copy over the dummy wallpaper in "/usr/share/wallpapers" (with the theme
#background file
cp $new_theme/background* /usr/share/wallpapers/dummy
exit 0
Last edited by pseudonomous (2008-07-07 21:59:42)

oh i forgot to mention... its rotating while moving. i.e. is doesn't have to stop rotate and then continue back to origin.

Slatebook x2 - USB flash and SD card at the same time

Similar Messages

Maybe you are looking for