Slave 3.9 server to master 3.8sp4 server

Hi,
I want to add a slave vpn server (3.9 in own tree) to my bordermanager 3.8
serverenvironment. I assume adding an ike server is possible in this
situation and I do not need to update my master to 3.9 first?
regards,
John

In article <6NX6i.7703$[email protected]>, John wrote:
> I want to add a slave vpn server (3.9 in own tree) to my bordermanager 3.8
> serverenvironment. I assume adding an ike server is possible in this
> situation and I do not need to update my master to 3.9 first?
>
It should be just the same as doing a 3.8 slave to a 3.8 master. It's
probably best to have the master upgraded first though, just in terms of
getting the latest patch level involved. I'd be sure to have bm38sp5 on the
master before adding the 3.9 slave.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Similar Messages

OVM 3.0.1 : Server Pool Master Error

am starting to see sudden errors on the console. All the vm's went offline including the server icon showing RED and in status Running (Error)
The event shows : Server Pool Master Missing Event / Server Pool Master Error.
Can anyone help me how to fix this issue? This just happened all of a sudden.

Ok I found the problem...although the locking from the rescan job seemed to disappear or timeout overnight.
It was actually the virtual machine that I had under that host that was in error. All I had to do was acknowledge the event that the virtual machine was powered off (selecting the vm, going to events, then acknowledge all). It's really annoying that VM 3 has this function because you are forced to acknowledge the event before you can continue with other activities.
It would be nice if there was maybe a way to only have that enabled for specific events. Another reason that this might have happened, was that I did not have HA enabled on the VM, so it wasn't migrated to my other server when I did the reboot.

Set Server Pool Master to Maintenance Mode

Hi all,
when trying to set a server pool master to maintenance, I got this: "OVM-2020 Server pool master (vm-13) can not be set to maintenance mode, please use server pool master failover policy to change its role, then try again."
I have dug through the help and docs, but can not find a method for dynamically reassigning the server pool master role.
This document: http://download.oracle.com/docs/cd/E15458_01/doc.22/e15441/server.htm#CCHIEBCE , just says "You must first reassign the Server Pool Master role to another server in the server pool.", without describing how.
This document: http://download.oracle.com/docs/cd/E15458_01/doc.22/e15441/site.htm#insertedID4 , states "You can also dynamically change the Oracle VM Server which acts as the Server Pool Master without causing any outages. See Section 3.4.1, "Editing Server Pool".", which just links back to the same section I am already in.
Now, I can just migrate all my machines and then stop ovs-agent, but I am not always the one managing this, and having a nice way through the web interface would be great.
Please just tell me I am blind and point me to the section in the manuals which tells me how to do it, or is this a feature which got dropped before release?
Thanks.

I have got the same problem, I want to switch the role of the server pool master to another server in the same pool. But after reading these answers, I have absolutly no clue how to do it!
We have a productiv environment, so any ideas like shutting down or stopping VMs are not acceptable.
So here is the situation:
"ovs#1" is hosting all VMs at the moment - Server type: Utility Server,Virtual Machine Server
"ovs#2" is free of any VMs - Server type: Server Pool Master,Utility Server,Virtual Machine Server
I want to switch the Server Pool Master from "ovs#2" to "ovs#1" without any downtime. How does this work? Thanks!
Specifications:
- Oracle VM Manager 2.2.0
- Oracle VM server release 2.2.1
Edited by: user11932329 on 15.09.2010 04:50

Non-server pool master in VM Manager

So I have two vm hosts that are not HA. The first is the Server Pool Master and everything is working well there. On the second host machine (the non-master) I put my template in the seed_pool folder and I can use xm to start the template and everything is fine, but I can not seem to get Oracle VM Manager to import the Virtual Machine Templates from the second host. Any ideas on what I did wrong?
Thanks,
Wesley

Hi Wesley,
all servers in a server pool (even if not enabled for HA) have shared repositories (this was changed with OVM 2.2, before that there was the concept of local repositories, but it does not seem to be existing anymore with OVS 2.2). These can be listed with
/opt/ovs-agent-latest/utils/repos.py -l
These are the folders the agents looks into the seed_pool to import the machines.
(note repos.py does not have an option for local repository).
If the repository is not listed here, where you put you seed_pool, then it is clear why you cannot import the template.
Regards
Sebastian

Cannot connect to database master at SQL server at SERVERNAME

I have installed SQL 2008 R2 in a fresh win 2008 R2. I’m running the sharepoint configuration Wizard using the database server name with the correct domain
credentials but I get the following error message. “Cannot connect to database master at SQL server at
SERVERNAME. The database might not exist, or the current user does not have permission to connect”
I‘m able to login to the new SQL server using the “SQL server management studio” with no problems. I used the sa account and a domain account.
The sharepoint server is also a new installation. And both servers have the firewall disabled.
Thanks in advance for your help.
Simon

Hi,
What is your SharePoint server’s version?
Please make sure you use the farm admin account to launch SharePoint configuration wizard. If not, please log in with this account, then check the effect.
In addition, check if you create a named instance, such as, servername\sharepoint, however, you only specify the servername in the configuration wizard. If this is
the case, change to servername\sharepoint, then check the effect.
Thanks,
Rock Wang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Regards, Rock Wang Microsoft Online Community Support

OVM-2020 Server pool master can not be set to maintenance mode

Hi Guys.
I have 2 server in ha mode
server 1 (10.99.99.161) with oracle Manager installed (server pool master, utility server, vm server)
Server 2 (10.99.99.161) without Oracle Manager installed (utility server, vmserver)
HA enable with server1 and server 2
10.99.99.165 is the virtual server pool master
1 San connected with server 1 and server 2.
Without problem I can connect on https://10.99.99.165:4443/OVS without problem.
All seems work, but :
1 - I I try to set in maintenance mode the server 1, the VM Manager say me:
OVM-2020 Server pool master (10.99.99.162) can not be set to maintenance mode, please use server pool master failover policy to change its role, then try again.
What I shuld do ?
2 - If I turn off the server 1 the server pool master is attribuite to server 2, but I'm unable to connect on https://10.99.99.165:4443/OVS webpage. It is correct, it is a bug, or I'm doing something wrong ? Must I upgrate something ?
Many Thanks
Luca

user8857532 wrote:
1 - I I try to set in maintenance mode the server 1, the VM Manager say me:
What I shuld do ?You need to live migrate all your guests off the current Master server, then issue service ovs-agent stop on the command-line. This will cause the pool mastery to switch to another server. Once that's done, you can start the agent agent.
2 - If I turn off the server 1 the server pool master is attribuite to server 2, but I'm unable to connect on https://10.99.99.165:4443/OVS webpage. It is correct, it is a bug, or I'm doing something wrong ? Must I upgrate something ?
You need to ensure the VM that's running the Oracle VM Manager software is still running. Live Migrate it first (preferred option) and flag it HA-enabled so that it is automatically restarted in the case of a server failure.

OVM-2008 The Server Pool Master has been registered with some other pool

I am getting this error, while creating my first ever server-pool.
Check prerequisites to create server pool (First-Pool) failed: (OVM-2008 The Server Pool Master (172.16.0.37) has been registered with some other pool, and can not register it again.)
Any idea what can be going wrong?
regards, Yora

The only time I've seen this is when the server really has been registered with another pool. You need to clean out the local ovs-agent database at */etc/ovs-agent/db* and restart the agent.

Changing the Server Pool Master

I need to remove one of the servers of a three node cluster, but before I remove that node I need to remove it as the Server Pool Master and make another node the server pool master. When I go to edit a server, the check box is there, but it’s disable. How do I enable this or accomplish this switch?

It's actually pretty simple, if both the old and new Server Pool Master servers are online. First, make sure that you're not running any VMs on either the old (existing) or new (planned) Pool Master servers. You also need to be sure that all your VMs are either Powered Off or Running, i.e. none being migrated or suspended.
Then, here are the steps:
1. Go to the Servers tab and delete the NEW Pool Master from the pool.
2. Edit the EXISTING Pool Master and replace it's details with those of the NEW Pool Master, i.e. IP Address/Hostname. If the new pool master is also a utility server, you must ensure that you select that option in the Edit screen.
3. Click OK
4. Click the Server Pool tab and select your server pool. Then click the Restore button to update the status of all your servers/VMs in the pool.
5. Manually restart the agent on the NEW Pool Master. Login to the Dom0 of the new pool master and run:
# service ovs-agent stop
# service ovs-agent start
You now have the new Server Pool Master running and the old one has actually been removed from the pool. You can add it back as a normal server using the default process in the GUI.
I know there are guys inside Oracle working on an official whitepaper on Reassigning the Server Pool Master role in situations where the old/new servers are not online, so you should keep a look out on the Virtualization OTN site.

Server Pool Master - 2 node HA setup - Need suggestion

I run OVM 2.2.1 in HA since 1 year.
Have 2 node. Guests failover when Utility Server,Virtual Machine Server crash.
But have problem with Server Pool Master.... ( My Server Pool Master it installed on my Node 1)
When my Server Pool Master crash, All HA guest move and restart on my second server. But because i can have only one Server Pool Master i can't graphically manage my cluster and my guest anymore.
When my primary server come back it doesn't resume it master role.
The only way to take back my console, is to restart my second server.
Note: I have a cluster URL to access to my console, however, But Oracle Express have no replication option then the BD of my second server is always empty.
What is you solution ?
How have you fix this situation ?
What the trick ?
Thanks
David

I have no answer on why your serverpool master does not resume its role when it restarts but I suggest you learn and use the XM commands on your oracle VM server to manage your guests.
To get a quick list of xm commands you can type "xm help" on your console. For more details and info run "man xm"
When your serverpool master comes back up, run the xm migrate command to move your guests from node2 to node1. When this completes, you can now reboot node2 with no issues and as I understand it, the serverpool master resumes its role after node2 is rebooted.

Server Pool Master fails and cannot fail over to another VM Server

Dear All,
Oracle VM 2.2.2
I have 2 VM Servers connect to Storage 6140 Array and on VM Manager I enable HA on the server pool, then on all virtual machines.
- VM Server 1 has role as Server Pool Master, Utility Server, Virtual Machine Server and has virtual machines running
- VM Server 2 has role as Utility Server, Virtual Machine Server and has virtual machines running.
I try to shutdown the VM Server 1 act as Server Pool Master but I don't see Server Pool Master fail over to another VM Server 2 and also status become to Unreachable both of 2 Servers.
Especially, All virtual machines cannot be accessible.
Please kindly give advice for this.
Thanks and regards,
Heng

Thanks Avi, I'll find and read that document. And thanks also for elaborating about the Utility Server.
After reading the followups to my original question, I tried to think of possible server "layouts" in a HA environment.
1) "N" servers in the pool, one of them is Pool Master, Utility Server AND VM Guests Server at the same time. Maybe this will be the preferred server for smaller, quicker VMs.
2) "N" servers in the pool, one is Pool Master AND Utility Server, but has no VM guests running on it
3) "N" servers in the pool, one is the Pool Master, another one is the Utility Server (none of them has VMs running on them), and finally a number of VM Guest servers
Let's take case 1. If the Pool Master & Utility server fails, given that it has VM guests running on it as well, I understand from your explanation that I'll be ANYWAY able to manually "live migrate" the guests somewhere else, using VM Manager. Is this correct?
If it's correct, then it's just a question of how much money I want to spend to have dedicated servers for different tasks, JUST FOR BETTER PERFORMANCES REASONS. Do you agree? And especially: do YOU have dedicated Pool Masters (just to figure out your "real" approach to the problem :-) )
I feel that I still miss something, the picture is not completely clear to me. The fact is, that I'm now testing on my new bladesystem, but for now I put up one single blade. Testing HA will be the next step. I was just trying to get a few things sorted out in advance, but there is still something that I'm missing, as I was saying...
Looking forward to your next reply, thanx again
Rob

ADPrep Migration from Windows Server 2003 to 2012 Foundation Server fails with error 0x80004005

Hi all,
Having a problem the forums and Google have been unsuccessful in helping me with. Server is Windows 2003 R2, migrating to Windows Server 2012 foundation. Have tried the AD Migration on the new 2012 Foundation server both as a standalone server
and a domain server member before running the migration. I get the following error:
ADPrep execution failed --> System.ComponentModel.Win32Exception (0x80004005): A device attached to the system is not functioning
I've checked the ADprep logs and have found the following:
[2013/01/22:11:15:01.000]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x0
[2013/01/22:11:15:01.001]
Adprep checked to verify whether operation cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2013/01/22:11:15:01.001]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x20
[2013/01/22:11:15:01.001]
Adprep verified the state of operation cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2013/01/22:11:15:01.021]
Adprep was unable to complete because the call back function failed.
[Status/Consequence]
Error message: Unable to access the computer "SERVER.apl.local". The network path was not found.
(0x80070035).
[User Action]
Check the log file ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
DSID Info:
DSID: 0x1811132a
winerror = 0x1f
NT BUILD: 9200
NT BUILD: 16384
[2013/01/22:11:15:01.021]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
We did have AVAST Antivirus installed on the server but this was removed. Any idea's?
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au

Hi Biswajit et. al., thanks for your help thus far, it is greatly appreciated...
Unfortunately I had already disabled the NIC's on both hosts. They currently remain disabled. I've just tried turning off IPv6 as well and no luck.
PortQry came back fine (I think) :)
=============================================
Starting portqry.exe -n server.apl.local -e 135 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 135 (epmap service): LISTENING
Using ephemeral source port
Querying Endpoint Mapper Database...
Server's response:
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[dhcpcsvc]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001d40.00000001]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001448.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[OLE4EF57D32A0DB45F9A64653468D7C]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000012ac.00000001]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncacn_np:\\\\SERVER[\\pipe\\tapsrv]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[tapsrvlpc]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[unimdmsvc]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncalrpc:[W32TIME_ALT]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncacn_np:\\\\SERVER[\\PIPE\\W32TIME_ALT]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[DHCPSERVERLPC]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[DHCPSERVERLPC]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncalrpc:[LRPC00000480.00000001]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[LRPC00001060.00000001]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[LRPC00001060.00000001]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncacn_ip_tcp:10.0.0.3[1067]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[LRPC00000d10.00000001]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncacn_ip_tcp:10.0.0.3[1067]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[LRPC00000d10.00000001]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncacn_ip_tcp:10.0.0.3[1067]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[LRPC00000d10.00000001]
UUID: 50abc2a4-574d-40b3-9d66-ee4fd5fba076
ncacn_ip_tcp:10.0.0.3[1048]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[audit]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[securityevent]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[dsrole]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[NTDS_LPC]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_http:10.0.0.3[1027]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[audit]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[securityevent]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[dsrole]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[NTDS_LPC]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_http:10.0.0.3[1027]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[audit]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[securityevent]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[dsrole]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[NTDS_LPC]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[OLE8B33809919104CE5B44970B01637]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[wzcsvc]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[wzcsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[wzcsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[DNSResolver]
Total endpoints found: 125
==== End of RPC Endpoint Mapper query response ====
portqry.exe -n server.apl.local -e 135 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 389 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 389 (ldap service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:54 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 (unknown service): LISTENING or FILTERED
Using ephemeral source port
Sending LDAP query to UDP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 is LISTENING
portqry.exe -n server.apl.local -e 389 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 636 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 636 (ldaps service): LISTENING
portqry.exe -n server.apl.local -e 636 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3268 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3268 (msft-gc service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 3268...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
portqry.exe -n server.apl.local -e 3268 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3269 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3269 (msft-gc-ssl service): LISTENING
portqry.exe -n server.apl.local -e 3269 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 53 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 53 (domain service): LISTENING
UDP port 53 (domain service): LISTENING
portqry.exe -n server.apl.local -e 53 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 88 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 88 (kerberos service): LISTENING
UDP port 88 (kerberos service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 88 -p BOTH exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 445 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 445 (microsoft-ds service): LISTENING
portqry.exe -n server.apl.local -e 445 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 137 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 137 (netbios-ns service): LISTENING or FILTERED
Using ephemeral source port
Attempting NETBIOS adapter status query to UDP port 137...
Server's response: MAC address 000423c733ec
UDP port: LISTENING
portqry.exe -n server.apl.local -e 137 -p UDP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 138 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 138 (netbios-dgm service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 138 -p UDP exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 139 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 139 (netbios-ssn service): LISTENING
portqry.exe -n server.apl.local -e 139 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 42 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 42 (nameserver service): LISTENING
portqry.exe -n server.apl.local -e 42 -p TCP exits with return code 0x00000000.
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au

HTTP server code 500 reason Internal Server Error

HI,
I am getting following error in Call Adapter
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Internal Server Error</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Internal Server Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have a Business system that is sending the material master data to a different Business System via XI. The message is received by XI correctly. XI correctly performs the transformation and identifies the message interface and selects correct receiver for the message. XI communicates with the receiving business system via the appropriate communication channel.
The message "fails" in the receiving system with the following error:
HTTP server code 500 reason Internal Server Exception explanation Error parsing of SOAP header.
The channel is using HTTP Adapter type, and i cross checked the communication channel details like Addressing type, target host, service number, path, user name, user password.......each and every detail is correct.
Please help me out to find the solution to the problem.
Points will be gladly awarded.
Edited by: Ashish Soni on Sep 24, 2008 9:02 PM

try sending the same XML message picking from moni and check whether you are getting same error or not?
if you get same error then check at web server for logs there you can find exact error.

Windows 2008 64-bit SQL Server 2008 64-bit Linked Server fails - ODBC connects but has issues

Installed the 64 but Oracle 11g client and Oracle ODAC.
From SQL Server Management Studio run script : exec master.dbo.xp_cmdshell 'PING OracleHostNameHere' Ping was successful
OraOLEDB.Oracle shows up in the Provider list. Run This Script:
EXEC master.dbo.sp_MSset_oledb_prop N'OraOLEDB.Oracle', N'AllowInProcess', 1
GO
EXEC master.dbo.sp_MSset_oledb_prop N'OraOLEDB.Oracle', N'DynamicParameters', 1
GO
EXEC master.dbo.sp_addlinkedserver @server = N'Nav14', @srvproduct=N'Oracle', @provider=N'OraOLEDB.Oracle', @datasrc=N'TheOracleHostName'
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'TheOracleHostName',@useself=N'False',@locallogin=NULL,@rmtuser=N'TheUser',@rmtpassword='ThePassWord'
Msg 15015, Level 16, State 1, Procedure sp_addlinkedsrvlogin, Line 49 The server 'TheHostName' does not exist. Use sp_helpserver to show available servers.
Did the same process on a Windows 7 32 bit Enterprise - ODBC Works after installing ODAC
ODBC worked, shows list of Oracle servers - picked the server - ODBC successful - MS Access able to use that ODBC service.
In Windows 2008 64 bit installed both Oracle 11g Client and 64 bit ODAC - ODBC opens, the list of oracle servers doesn't populate, hard code in the host name - ODBC reports Success.
Another Person Suggested: Win7 64-bit with Oracle 11g. Oddly enough, it ran differently when I opened a command prompt window as administrator and ran setup.exe with the suggested command-line options:
setup.exe -debug -printtime -printmemory -printdiskusage -logLevel finest
While it had previously been failed both by running setup from the Explorer windows as administrator and by running it from the command line as administrator - it died every time at the same point mentioned by others in this thread - just after this message appeared in the log:
Get view named [SummaryUI]
( I have tried re installing with no success)

Windows 7 Enterprise 32-Bit
Installed the version 12 for 32 bit ODAC and it worked. The key is to Install as Administrator once it is unzipped.
Was able to set up Listener then
Was able to set up ODBC using the ODAC. Connect MS Access 2010 to the Oracle views.
Then, tried to install the 64 Bit onto Windows 2008 Server.
It locked up during installation both times.
Installed ODAC without an error.
However, the ODBC setup will not provide a list of the servers in the ODBC TNS Service Name listbox for Server 2008.
In Windows 7, it populates the TNS Service Name.
The list box in Windows 2008 is empty.
Do you know what would cause that?
The .ORA file scrips look the same on Windows 2008 as they do on Windows 7 except it does not have the (server = Dedicated) argument.
Thanks.

Java Web Server 6.1 & Pooled SQL Server 2000 JDBC Connections

If anyone can shed some light on this problem I would greatly appreciate it.
I am unsuccessfully trying to use a database connnection retrieved from a pool configured using Java System Web Server 6.1 with the SQL Server 2000 JDBC Driver.
The background:
1. I have downloaded the SQL Server 2000 JDBC Driver and installed it on the web server.
2. I used the Administration GUI to add the .jars(namely msbase.jar, msutil.jar, and mssqlserver.jar), to the classpath.
3. Upon creating a simply JSP to access connection metadata using the direct connect method, ie.,
Class.forName( com.microsoft.jdbc.sqlserver.SQLServerDriver);
Connection con = DriverManager.getConnection( "jdbc:microsoft:sqlserver:// ....
I am shown a successful output of...
JDBC Test
Registering JDBC Driver
driverClass: com.microsoft.jdbc.sqlserver.SQLServerDriver loaded and registered.
Driver Information
Driver Name: SQLServer
Driver Version: 2.2.0037
Database Information
Database Name: Microsoft SQL Server
Database Version: Microsoft SQL Server 2000 - 8.00.760 (Intel X86) Dec 17 2002 14:22:05 Copyright (c) 1988-2003 Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: )
Avalilable Catalogs
catalog: master
catalog: msdb
catalog: Northwind
catalog: pubs
catalog: tempdb
4. This tells me that the web server has access to the files necessary and the classpath is configured correctly.
Now the fun begins...
In order to set up the JDBC Connection Pool I have done the following...
1. I have created a web.xml file for the web-app which contains the JSP and includes the following entry
<resource-ref>
<res-ref-name>jdbc/devjwscp</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
2. I have used the "JDBC Connection Pools" link under the "Java" tab in the Administration GUI to create a connection pool.
"Pool Name:" is "devjwscp"
"DataSource Classname" is set to "com.microsoft.jdbcx.sqlserver.SQLServerDataSource". All other properties have been left alone.
3. I have used the "JDBC Resources" link under the "Java" tab in the Administration GUI to create a JNDI resource.
"JNDI Name" is set to "jdbc/devjwscp"
"Status" is "true"
"Pool Name" is "devjwscp"
The web-app JSP comes back with the following exception.
JDBC Test
Exception Thrown
Cannot create resource instance
javax.naming.NamingException: Cannot create resource instanceorg.apache.naming.factory.ResourceFactory.getObjectInstance(ResourceFactory.java:167)
javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:301)
org.apache.naming.NamingContext.lookup(NamingContext.java:834)
org.apache.naming.NamingContext.lookup(NamingContext.java:181)
org.apache.naming.NamingContext.lookup(NamingContext.java:822)
org.apache.naming.NamingContext.lookup(NamingContext.java:181)
org.apache.naming.NamingContext.lookup(NamingContext.java:822)
org.apache.naming.NamingContext.lookup(NamingContext.java:181)
org.apache.naming.NamingContext.lookup(NamingContext.java:822)
org.apache.naming.NamingContext.lookup(NamingContext.java:194)
org.apache.naming.SelectorContext.lookup(SelectorContext.java:183)
javax.naming.InitialContext.lookup(InitialContext.java:347)
_jsps._jdbctest_jsp._jspService(_jdbctest_jsp.java:236)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.service(JspServlet.java:667)
com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:447)
com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:363)
javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)
4. FYI my server.xml <RESOURCE> entry looks as is shown below
<RESOURCES>
<JDBCCONNECTIONPOOL name="devjwscp" datasourceclassname="com.microsoft.jdbcx.sqlserver.SQLServerDataSource" steadypoolsize="8" maxpoolsize="32" poolresizequantity="2" idletimeout="300" maxwaittime="60000" connectionvalidationrequired="off" connectionvalidationmethod="auto-commit" validationtablename="" failallconnections="off" transactionisolationlevel="read-uncommitted" isolationlevelguaranteed="off">
<PROPERTY name="serverName" value="secret"/>
<PROPERTY name="portNumber" value="1433"/>
<PROPERTY name="User" value="secret"/>
<PROPERTY name="Password" value="secret"/>
</JDBCCONNECTIONPOOL>
<JDBCRESOURCE jndiname="jdbc/devjwscp" poolname="devjwscp" enabled="on"/>
</RESOURCES>
What gives? Do I need to add anything else to the server.xml? I know the server.xml for JWS differs from Apache. I have done an exhaustive search of the web. Many other individuals have had the same thing happen, buy none of them offered any explaination or remedy.
Thanks in advance.

Hi,
Were you able to get it working.
I am using
Sun ONE Web Server 6.1SP2 B04/07/2004 18:47
I am still getiing the same error. I also suspect that there is something wrong with thr DTD too. It gives me the following when the server comes up.
Sun ONE Web Server 6.1SP2 B04/07/2004 18:47
Listening for transport dt_socket at address: 1699
info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.4.2_04] from [Sun M
icrosystems Inc.]
info: WEB0100: Loading web module in virtual server [https-AW-NYNY-D609628.nna.
wdpr.disy.com] at [acsanet]
info: WEB0100: Loading web module in virtual server [https-AW-NYNY-D609628.nna.
wdpr.disy.com] at [testing]
failure: WEB0120: XML error parsing deployment descriptor [C:/Sun/WebServer6.1/h
ttps-AW-NYNY-D609628.nna.wdpr.disy.com/webapps/https-AW-NYNY-D609628.nna.wdp
r.disy.com/testing/WEB-INF/sun-web.xml]
Failed to create the XML-DOM Document. Check your XML to make sure it is correc
t.org.xml.sax.SAXParseException: Character conversion error: "Unconvertible UTF-8
character beginning with 0xa0" (line number may be too low).
at org.apache.crimson.parser.InputEntity.fatal(InputEntity.java:1100)
at org.apache.crimson.parser.InputEntity.fillbuf(InputEntity.java:1072)
at org.apache.crimson.parser.InputEntity.isXmlDeclOrTextDeclPrefix(Input
Entity.java:914)
at org.apache.crimson.parser.Parser2.maybeXmlDecl(Parser2.java:1183)
at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:653)
at org.apache.crimson.parser.Parser2.parse(Parser2.java:337)
at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:448)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl
.java:185)
at org.netbeans.modules.schema2beans.GraphManager.createXmlDocument(Grap
hManager.java:711)
at org.netbeans.modules.schema2beans.BaseBean.createGraph(BaseBean.java:
2075)
at com.iplanet.ias.web.WebContainer.loadWebModule(WebContainer.java:695)
at com.iplanet.ias.web.WebContainer.loadStandaloneWebModule(WebContainer
.java:626)
at com.iplanet.ias.web.WebContainer.loadWebModules(WebContainer.java:600)
at com.iplanet.ias.web.WebContainer.createVS(WebContainer.java:374)
at com.iplanet.ias.server.J2EERunner.createVS(J2EERunner.java:223)
info: WEB0100: Loading web module in virtual server [https-AW-NYNY-D609628.nna.wdpr.disy.com] at [search]
config: HTTP4292: flex-init: Log file C:/Sun/WebServer6.1/https-AW-NYNY-D609628.
nna.wdpr.disy.com/logs/access should be removed before changing its format
info: HTTP3072: [LS ls1] http://AW-NYNY-D609628.nna.wdpr.disy.com:80 ready to
accept requests
startup: server started successfully
info: CORE3274: successful server startup
the sun-web.xml is as below:
<?xml�version="1.0"�encoding="UTF-8"?>

<!DOCTYPE�sun-web-app�PUBLIC�"-//Sun�Microsystems,�Inc.//DTD�Application�Server�8.0�Servlet�2.4//EN"�"http://www.sun.com/software/appserver/dtds/sun-web-app_2_4-0.dtd">
<sun-web-app>
     <resource-ref>
          <res-ref-name>jdbc/oraclePool</res-ref-name>
          <jndi-name>jdbc/oraclePool</jndi-name>
     </resource-ref>
</sun-web-app>
Am I using the right DTD ?
Please let me know.
Thank you.
-- Martin Louis

Removing Server 2000 DC and adding Server 2008 DC.

Removing Server 2000 DC and adding Server 2008 DC.
From: Server 2000 Sp4 (not leaving in place, no plans to demote)
To: Server 2008 Sp2 (will be a single DC and hold Global Catalog)
Single forest domain. Only one DC.
Problem: The old server 2000 is still a primary DC and the new server 2008 is not taking over.
Completed the following tasks:
NIC binding (connected NIC at top of list on new server)
New server is also DNS server. This role is working and it points to itself 127.0.0.1 and clients have been moved to use the new server for DNS, they are working.
New server has some shared folders. Clients are connected and this is working until we remove the old server, then they cannot authenticate to the mapped drive.
Both servers show the role of Domain Controller
Adprep /forestprep and /domainprep and /domainprep /gpprep were run on the server 2000 (as it was the existing DC) with a successful message. (not sure if enough time was allowed for replication)
All five Flexible Single Master Operations (FSMO) roles were transferred using GUI.
Schema Master, Domain naming master, Infrastructure master, RID master, PDC Emulator.
And have been verified. All roles transferred and the new server 2008 and new server is also the global catalog.
Then to verify new server is handling the role we unplugged the Ethernet cable from the Old server 2000, then went to client stations and re-started them and they would not find the new DC and connect to it.
On the new server when we opened active directory users and computers the domain did not appear.
Verified in DNS manager the A record and reverse pointer were correct.
For some reason the new server is looking to the old server. Even though all roles are moved over and DNS appears to be setup correctly it won’t exist independently.
What’s missing?
If something was missed or performed wrong, do we have to remove the roles and start from scratch? Or can we re-run adprep and walk the steps again leaving all as-is?

Hello,
as first step please post an unedited ipconfig /all from the old and new DC/DNS server and one problem client.
It seems that your installation from the new DC wen't well and as described in
http://msmvps.com/blogs/mweber/archive/2010/02/06/upgrading-an-active-directory-domain-from-windows-server-2000-to-windows-server-2008-or-windows-server-2008-r2.aspx Just check again yourself.
A DC should NEVER be shutdown or just disconnected from a domain, it MUST be demoted correct, as you ruin into replication errors in the event viewer without that steps and you will never be able to install a additional DC with using the same name.
See the end of my article about removal steps.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Slave 3.9 server to master 3.8sp4 server

Similar Messages

Maybe you are looking for