SLD and Software Component versions Import
When I try importing Software Component versions from SLD, I was not able to see what I created in SLD. All of the created Software components ( there are some software components created earlier and are in Production as well ) are not visible during import into Integration Repository.
Thanks
Hi,
<i>All these checks are done and we will not able to connect to SLD if there is a problem right?.</i>
>>>These checks will help you to make in sync with SLD and the repository..
If you are not able to see the SWCs in the SLD itself, then check with other user ids ...During SLDCHeck is it pointing to correct SLD ?
Check out this SAP note- 764176 It may help u
Regards,
Moorthy
Similar Messages
-
Transport products and software component version
Hi,
I created a Products and its Software Component Version in System Landscape Directory of XI development.
I imported this Software Component Version into Integration Builder and developed design and configuration objects.
The scenario is completed and now I want to transport the Products and Software Component Version to XI Production.
Could someone please explain the transport procedure.Hi Shravan,
Thanks four your instructions. I would like to have more details on the export/import procedure. Please confirm the following steps are correct:
From SLD of XI development:
1/ Edit new product and its software component version.
2/ Click on icon Export: XI generates a zip file and downloads it in c drive.
From SLD of XI Production:
1/ Select Import utility under system catalog.
2/ Browse and select the zip file
In XI production there are existing third party products, and I do not want the transport of this new product causes any problem.
Design and configuration objects will be exported/import ed after the successful transport of product and software component version transport.
Regards,
Daniel -
Problem with importing software component versions from SLD to I.R
Hi Guys,
I have some problem in importing my software component versions from SLD to IR. While connecting to SLD it is using the port 50100. Instead of 50000. We are manually correcting it while connecting to SLD. but when we try to import the Software Component Versions from the SLD to IR. It is saying no objects available in 50100. It is not connecting to port 50000. Pls any body help me with some solution. Thanks in advance.
Regard's
Kiran.BIn the Integration Builder page, Click on the Administration and check the following parameters to make sure they are pointing to right SLD system and port.
com.sap.aii.connect.cr.httpport,com.sap.aii.connect.cr.name,com.sap.aii.connect.landscape.httpport,com.sap.aii.connect.landscape.name
Also check with Tcode SLDCHECK too -
Unable to import software component version from sld
hi,
i have also problem with "import software componenet version "
i got a message like
"unable to import software component version from
system landscape directory ......."
than i gone for SLDCHECK...i got an error it is ............
calling function LCR_LIST_BUSSINESS_SYSTEM
Retreiveing data from the sld server function call returned exception code 4
connection to sld does not work
check sld function and configuration
what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
with regardsHi,
Make sure you have did all the configuration.....
http://help.sap.com/saphelp_nw70/helpdata/EN/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
cheers
Sunil. -
Insufficient authorization to import software component version from SLD
hi guru
i can not import software component version from SLD into ESR. once the software component version has been chosen, a message will be displayed, Insufficient authorization to create object ElementTypeId: 0, Name: SALES, Vendor: sap, Version: 1.0, GUID: 32e93300b3e511decc06ecae0a421877, after CREATE button has been clicked.
any ideas? thanks
Edited by: Stephen Xue on Oct 8, 2009 12:00 PMHi Stephen,
If you want to create the SWCV and import that SWCV to the IR/ESR then your user having either one of the below roles.
SAP_XI_ADMINISTRATOR
SAP_XI_CONTENT_ORGANIZER
Go to transaction SU01 and give your user name and click on display.
Now click on Roles tab, here you check the above roles are appearing or not, if not then you don't have privilizes to do that things.
If you don't have that credentials then contact your BASIS guy.
FYI
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Regards
Ramesh -
Unable to import software component version in IR
Why i can't import software component version in IR by Tools->Transfer from SLD->import software component version?
error message is "Unable to determine dependencies of software component version"
i just create it in SLD before, anything else need to do?
please give me some information, Thanks!Hi Robert,
Please cross check with this blog on how to create a SWCV and import in IR.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
Regards,
Sachin -
Import of Software Component Versions
Hello.
My problem is in Integration Repository, in Import of Software Component Versions.
Mensagge is:
" Unable to read software component versions from System Landscape Directory ".
I want import software component.!
Help my please.!!!
[email protected]
In tx sm59, result.
Exchange Infrastructure: Test LCR Connection
RFC destination SAPSLDAPI does not exist
=> Create the RFC destination by using transaction SM59!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
RFC destination LCRSAPRFC does not exist
=> Create the RFC destination by using transaction SM59!
Message was edited by:
Claudio LeonIndeed, the instación this incomplete.
It is possible that you indicate to me step by step like making these steps to finish the installation, since I have not been able to finalize and they appear to me new errors.
In SLDCHECK resquest is:
Exchange Infrastructure: Test LCR Connection
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_UNICODE
gateway host:
plata
gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
Error when opening an RFC connection
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_UNICODE
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
Error when opening an RFC connection
help me.
[email protected] -
Unable to set import lock for software component version
Hi team,
While importing object (.tpz) file into integration repository we are getting error message as below.
======
Unable to set import lock for software component version <XXXX>-COMMON,1.0 of <XXX>.com because user <userid> is currently importing data to this component
try again once user <userid> has finished importing data
=======
We checked with the user and found he is not doing any activity in fact he logged off. the developer wants to import and how do we terminate this import attement and proceed with new importing of the same object
We wan't to avoid cache refresh as this is production environment
We already performed clear SLD data cache with in the IR not for whole.
Thanks
VijayHi Vijay,
Thefollowing threads speak about the locking issues with the IR objects .Hope this will help you out in resolving the issue.
http://help.sap.com/saphelp_erp2005/helpdata/EN/93/a3a74046033913e10000000a155106/content.htm
Internal lock version management : Unable to copy objects
Thanks,
Ram. -
SAP ECC 6.0 Software component Versions or Product versions in XI (SLD)
Hi All,
please, let me know the solution for this problem,
Curently we r using PI 7.0 SPS 14 kernal Version 179.
Unable to find out SAP ECC 6.0 Software component Version or (Product version) in SAP XI 7.0 SLD.
how to solve this issue....
Advace thanks.
MaheshHi Volkar,
I am doing Plant driven procurement service enablement scenario by using XI 7.0, for this,
we are integrating MM & SRM SUS Through XI 7.0 (MM -- XI-- SRM SUS).
For doing this Scenario,
1. Downloaded XI Content for SRM
2. Imported XI Content into the IR
3.After importing, Plan_Driven_Procurement_SupplierEnablement Scenario was enabled.
Here, MM side SWCV is R/3 4.6 is available by default. but in my case i need to change to ECC 6.0(bcoz,currently we r using ECC 6.0 version )
In SLD, there is no ECC 6.0 version.
So, how to solve this issue.
Thanks in Advance.
Mahesh -
Software Component Version cannot be changed after Importing Objects
Hi Gurus,
I was trying out the import export function of XI. I export a message mapping and then re-import it back into XI. However, after doing that, it is telling me that the Software Component Version cannot be changed. I'm now unable to make any changes to any of the objects.
Is there anyway to go ard this?
Thanks in advance.Hi,
I tried ticking the check box. But its giving me the following warning
Originality indicator for the software component version set later Ensure that the software component version only contains one original repository
i ignored the error and activate the change list.
However, im still unable to make changes. I tried ticking the "Original Objects" as well but still unable to change.
Thanks. -
Product and Software component in SLD
Hi,
What is the basic concept of product and Software component.I have few questions.
If our company is going for Sap implementation of ISmedia
and XI as middleware for interfacing with other systems then what do we need to do for product and SWC.
Do we need to create a third party product and SWC for this project in sld?
We can create differnt Software component under the existing Product of SAP ISM
What are the best practices
Thanks,
Naveen.Hi,
about Software Product and component go thru this part of SAP help-
http://help.sap.com/saphelp_nw2004s/helpdata/en/a2/2999ef97ea2b4790165f9ca5c05c41/frameset.htm
<i>Do we need to create a third party product and SWC for this project in sld?</i>
>>yea, you can create a thridparty product.
<i>We can create differnt Software component under the existing Product of SAP ISM</i>
>>>You can create software components for the product.
I think, the documentation will help you understand this.
Regards,
Moorthy -
Can not view a Software Component Version in Enterprise Services Repository
Hello,
I'm trying to import in ESR the software component version created in the SLD. I'm using SAP PI 7.3.
Into to work area select Software Component Version and click on checkpoint Import from SLD. Click in bottom Display (List of Software Component Versions) and it show me the list but cannot view the Name of the SWC created.
I cleared the cache (Environment - clear sld data cache) and the result it's the same, not show the SWC the I created.
Do you have any idea?
Thank you in advance.
--ervaHi,
as it's a new installation, you certainly missed something. have you did controls of Readiness Check doc and tcode SLDCHECK ([see PI 7.1x oss note|https://service.sap.com/sap/support/notes/1143810]).
and check these post installation controls (but it's for PI 7.1): [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e?QuickLink=index&overridelayout=true]
Mickael -
Unable to read software component versions from System Landscape Directory
Hi XI,
Once I could import software component version but now I can't. Maybe I did something wrong in SLD.
Could you please give me some hints?
Thanks,
Brucehi,
i have also problem with "import software componenet version "
i got a message like
"unable to import software component version from
system landscape directory ......."
than i gone for SLDCHECK...i got an error it is ............
calling function LCR_LIST_BUSSINESS_SYSTEM
Retreiveing data from the sld server function call returned exception code 4
connection to sld does not work
check sld function and configuration
what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
with regards
Edited by: praneeth mamgunta on Jun 27, 2008 4:04 PM
Edited by: praneeth mamgunta on Jun 27, 2008 4:07 PM -
Unable to read software component version from System Landscape Directory "
I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1. Call the wizard-based configuration tool as described in Configuration Wizard.
2. Select the scenario PI and the task PIPostInstallProcess.
3. Choose Execute.
A list of the steps to be executed by the wizard is displayed.
4. Choose Install. -
Unable to read software component versions from System Landscape
Dear all,
I have an ECC system with ABAP and Java installed.
I already configured so that SLDCheck, RFC destination configuration run successfully.
PIAPPLUSER is not locked and can logon.
However, when I import software component version in Integration Builder, the system return error message "Unable to read software component versions from System Landscape Directory "Server:50000".
Please tell me how to correct this error.
GiangHi,
Check this
http://****************/Tips/XI/SWComponentError/Resolve.htm
"Unable to read software component versions from System Landscape Directory
Unable to read software component versions from System Landscape Directory
unable to import from SLD
Regards
Seshagiri
Maybe you are looking for
-
What is the best practice for timezones on routers and switches? Should I make them all the same, say EST? Since this is where all the management servers reside or should they be set to where they are located? Should I be using GMT/UTC time? Comme
-
Contact Picture Not Syncing Correctly
Hi, I've got an app that gets all my friends pictures from facebook & adds them to my contacts on my iPhone & iPad. The problem is when they are uploaded to iCloud & sent to my contacts on my Mac, the pictures are either blurred or cut in half, see p
-
Sound Problem Plus Memory Problem
I've also posted this same issue at the EVGA website with no help what so ever yet. Also if it's ok I'm having the above mentioned memory problem that it probable not related but if anyone does have good input I would love to hear. Hope this doesn't
-
Tell me about PCH , PAP and PNPCE database using in HR reports
Hi SAP-HR Experts . May anybody tell me about PCH , PAP and PNPCE database using in HR reports . Does anybody have any ABAP report code about using thses LDB's . I always used PNP database in my reports , i never come across in which i should use PC
-
Internal and external switches on server 2012 r2
this is driving me nuts. I have a vm with an internal and external switch. I am trying to get backups to route to the host machine using the internal switch only. I've gone all over priorities and the routes are all fine but the data will constantly