SLD and Transport tragets
Hi,
a small confusion struck in my mind while understanding Groups and Business Systems Transport targets...suppose we have two SLDs SLD1(Dev & QA) SLD2(Prod)
1) Is this is a right structure of SLDs like
SLD1(Dev, QA) -
> (QA, Prod) SLD2
if yes what are the groups exist in SLD1 ? Dev, QA & PRD ?
if yes what the Group PRD refer to which Integration server? because without defining Integration server we can't assign group ! correct me if I am wrong.
Please clarity
Thanks and Regards
mahesh.
bcoz we need to alter communication channels for each transport !
That u have to do anyhow. The communication detail specific to the server has to be entered separately.
The other understanding in ur last post is correct. I thinks everything pretty clear now
Regards,
Prateek
Similar Messages
-
How & Where to create the Target Groups and Transport Targets for Business
Hi Experts,
I am Transporting the scenarios from Development 500 client XI system to Development 500 client PI7.1 system. I have taken the exports of Technical system and Business System from the DEV XI system and correspondingly have imported the same in the PI7.1 system. I can see the all the business system in the Business system SLD of the PI7.1 system. I would like to assign the Business System Groups and Transport Targets for every business system that I want to transport. How can I do that ? Whether this is to be done in DEV XI system or the DEV PI system? Can somebody elaborate the step by step method to create the Groups and Target system for the every Business system so that I can import the object of the Integration Directory sucessfully................................
Thanks & Regards
suk4023
Edited by: sukande on Aug 17, 2010 8:18 AMHi Supriya,
Thanks for the reply and good illustration............Still going further after defing the destination for transport in the source SLD Business system ( XI dev server) , then we should export it and subsequently import it in the SLD of the PI 7.1 ie the destination server. Then we should transport the objects of Integration Repository and Integration Directory to the new PI7.1 server. Is this the right way to proceed.? Hope that this will not give the error while importing the objects in Integration Directory. An typical which comes while importing the objects in the Integration Directory is as follows:-
*Import failed because of business system transfer of object Communication Component | PCM: Obligatory transport target for business system PCM not found in System Landscape Directory*
Pls clarify on this ......
Thanks & Regards
suk4023 -
SLD objects transport....
Hi Experts,
I hav a qs...can we transport BS,TS,LS from the SLD of a XI system( it may be Dev or Qua) to the SLD of another XI system (a sandbox) which is not in the same landscape....If it is possible thn pls can anyone provide me step by step guide...
Regds,
New XI..Hi,
Either you need to manually export SLD objects from the first SLD and import that in second SLD.
Or You can transport the SLD objects by SLD transports...
have you check -
https://websmp210.sap-ag.de/~sapidb/011000358700000315022005E.PDF
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Thanks
Swarup -
How to Configuring Groups and Transport Targets ?
Hi Experts,
In my scenario i am having two XI Servers XI1(DEV) and XI2(QUA) each system is connected to different r/3 system.
If i transport object from XI1(DEV) to XI2(QUA) after defining Transport Target in XI1(DEV) as r/3 system connected to XI2(QUA) using file system would be fine (or) should i go for CTS?
Regards,
RajeshKumar.DHi,
You have to use Transpoprt method
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
1) Select the Business systems GroupEdit Groups
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri -
Webinar: Change Management and Transport in the Enterprise Portal
<b>SAP NetWeaver Know-How Network Webinar:
Change Management and Transport in the Enterprise Portal
Wednesday 21 July 2004
11 a.m. EDT</b>
On Wednesday 21 July, Scott Jones hosts the webinar titled <b>Change Management and Transport in the Enterprise Portal</b> as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Scott describes his webinar presentation:
Change Management offers special challenges to administrators working in Enterprise Portal 6.0 SP2 environments. This talk provides recommendations and tools, and defines best practices and methods for the effective transport of Enterprise Portal content, with special attention to content dependencies, tracking, and troubleshooting. We'll also look forward to Change Management enhancements coming with Netweaver 04.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
<b>How to Participate</b>
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code TBD.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
<b>About the SAP NetWeaver Know-How Webinar Series</b>
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
<b>Disclaimer</b>
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.Hello,
In the intresting document I read that for the deployement the version number mentionned in the MANIFEST.MF is very important in a clustered evironment.
SAPnote 727180 - Version of PAR File in Manifest File
denies this.
Can you clear this out?
Kind Regards
Koen Van Loocke -
Problem with SLD and Creation of JCo
Hello everyone!
I have a problem with the SLD and the Creation of JCo on the Portal, in trying to create the JCo always tells me that the name used there in the SLD, being that the facility is new.
Who performs the installation, set in the SLD the ECC 6 PRD, delete it to see if I could create a JCo but still the error again when creating the ECC 6 PRD in the SLD I said that already exists and can not create it.
I found a forum which recommended re-import the cimsap .... .... zip and zip CR_Content which would clean everything, I managed to import the zip cimsap ... but in trying to raise CR_Content gives me the following message "All incremental updates of the selected aggregate import for export SAP_CR line have already been loaded before. You require a newer import to update your current content SAP_CR version 4.11." .
I recommend, do the installation again, reload the cimsap.zip and CR_Content.zip a copy homogeneous.
from already thank you very much
Text of error to create JCo destination
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
java.lang.NullPointerException
at at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
at at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
at at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionGoForward(ButtonBar.java:505)
at at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:280)
at at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
... 28 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.1)
Version null
DOM version null
Client Type msie7
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0017.20081210091801.0000 (release=NW04S_17_REL, buildtime=2009-01-12:09:43:27[UTC], changelist=52884, host=pwdfm114), build date: Tue Apr 28 19:28:39 CLT 2009
J2EE Engine 7.00 patchlevel 48199.450
Java VM IBM J9SE VM, version:2.2, vendor: IBM Corporation
Operating system Linux, version: 2.6.18-92.el5, architecture: amd64
Session & Other
Session Locale en
Time of Failure Fri Aug 28 11:43:53 CLT 2009 (Java Time: 1251474233677)
Web Dynpro Code Generation Infos
sap.com/tcwdtools
No information available null
sap.com/tcwddispwda
No information available null
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
java.lang.NullPointerException
at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionGoForward(ButtonBar.java:505)
at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:280)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)Hello!!
The "SLD" with which I am working up to Portal, the "ECC" installs itself as "ABAP.
Who did the installation and initial configuration, do not leave any documentation about it.
Now I need to create the systems and "JCo" necessary to enable them to implement the "ESS", but errors are presented above.
Some days ago I managed to update the CR_Content, which allowed me to create the "JCo" but at the time of the test, says' com.sap.mw.jco.JCO $ Exception: (103) RFC_ERROR_LOGON_FAILURE "name or password incorrect .
I managed to also create the portal systems, "System Administration -> System Configuration -> Content Portal" and to test it fails on "Test Connection with Connector", which as noted is associated with the connectors "JCo".
For the creation of the system, I think I should create something in the Visual Administrator ", but within the documentation that I do not see anything about it.
thanks for your help! -
How to get truck no and transporter name from header.text(vf03) to webi rep
Hi
making a stock received details bill wise with webi (bo 3.1)
so require a truck no and transporter name along with consignor detail and bill wise detail.
picking data from vbrk and vbrp tables.
pls assist in this
Thanks and Regards
Ritu Raj
BI/BO ConsultantThanks M
Yes It is Sales and Distribution process and we are using ODBC Connectivity through database client for the connection parameter in the Universe designed to the R/3 ECC.
So we dont have
a) DS
b) BW
c) Data Connector
So Universe is basically on the relational Data
base where by linking VBRK,VBRP and various Master tables.
(OLTP level universe)
So the quesion remain as it is bcos we cant access functional module READ_TEXT in the R/3
Pls suggest for the following Alternatives
a)Using Crystal Reports
b)Use BW (Currently it is not there,but soon be Implemented)
What do you think?
Bcos we dont want to refresh z table which could be developed from given functional module before running our report.
Regards
Ritu Raj -
Probelms while replicating Data Source and transport into test system
I find the following error messages whilre transporting into test system.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Mapping between data source 0EC_PCA_1 and source system is inconsistent.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
any ideas please..........
Enhanced the Extract structure and activated the data source in Source system
Replicate the Data source in BI and install the Infosource through BI Content activated and transport them to Test system.Hi,
1.First transport the data source from R/3 dev to R/3 quality
2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you data source may not appear)
3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
activate these info objects and collect in another request
4.transport these info objects from BI dev to BI quality
5.transport entire data source to bw quality.
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM -
Best practise in SAP BW master data management and transport
Hi sap bw gurus,
I like to know what is the best practise in sap bw master data transport. For example, if I updated my attributes in development, what are the 'required only' bw objects should I transport?
Appreciate advice.
Thank you,
EricHi Vishnu,
Thanks for the reply but that answer may be suitable if I'm implementing a new BW system. What I'm looking for is more on daily operational maintenance and transport (a BW systems that has gone live awhile).
Regards,
Eric -
Creation and transportation of query from development to simulation system
Hello experts,
I need to create a new Query in the development system in the General Ledger folder in Financial reporting. and then I need to transport the same to the simulation system. what are the correct steps I need to follow to do the same if have to avoid any issues during this transportation.
Do I need to do any modifications to the role ZS_XX_BEX_MENU and transport the same?
Could anyone help me in this regard giving me the exact procedure I need to follow.
RegardsNo need to modify, but if it is $temp then change it has ur won request.
follow the genral procedure
1)In RSA1 Go to Transport tab and collect ur query.
Drag to right screen
If it is in $Temp change it to your own request. For this You may need Access.
2)Query contains all objects which were used in that query.
if any Info object that are created newly then check for Transport
3) Then, finally click on transport(Truck) icon
4) By default, it will collect all new objects including newly created Info Objects also. You can change the collections of your own selection.
You will get a Request Number here. Please save this Number so that you can check this at SE09
5) In SE09 search for your Request Number.
6)Release The request by subsequent process onwards( Means sub contents like infoprovider first and then Query) -
Problems in SLD and Cache refresh (SXI_CACHE).
Dear Experts,
I am facing SLD and Cache refresh problems in PI 7.0 on HP-UX.
1) SXI_CACHE : Last Error During Cache refresh is showing LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM error. And also Start Delta Cache Refresh / Start Complete Cache refresh are in deactive mode (Frozen).
2) SLDCHECK : Log says No Business System for ABC Client 100 ".
where ABC=SID. Business System INTEGRATION_SERVER_ABC is declared in SLD and client 100 is assigned.
My question is : Is this a BASIS or DEVELOPER issue? Also please let me know if you have any solutions for the above mentioned issue. Thanks in Advance.
SLDCHECK Log Snippet:
SLD server access settings:
host name: ABCXIDEV
port number: 50000
user : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
INTEGRATION_SERVER_ABC
ERP_DEV_100
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system ABC client 100
=> Check and maintain the SLD content for the current clientHello,
Since this is an PI system, your XI consultant must have created/will need to create business systems in SLD for the scenario to work properly. This error is because it cannot find the business system.
You cannot point out the fingers on Basis or XI and say that it is THEIR issue. Please consult with the consultant who is doing the XI interface and check if the business systems he require are properly created in SLD. If not, create them or ask them to create it (if they are allowed to..).
From the error, what i can see is that you have defined an integration server INTEGRATION_SERVER_ABC in SLD . the XI interface is checking the required business system in the integration server INTEGRATION_SERVER_ABC in SLD but cannot find it over there. Please check the integration server INTEGRATION_SERVER_ABC in SLD and talk to the XI consultant and you will be able to fix this with their help.
Hope this helps you..
Regards,
Jazz -
What's the difference between transport route and transport layer
what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!
Hi,
Transport Layer in ABAP Workbench
The Change and Transport System supports the distribution of development
work on large projects across multiple SAP Systems.
The packages in each development system are grouped into one transport
layer.
The transport layer determines whether objects are assigned to a local
or transportable change request.
Use
Each of your SAP development systems is assigned a transport layer as
its standard transport layer. If you use Extended Transport Control, you
can assign different standard transport layers to certain clients.
You can define at the most one consolidation target for each SAP System
and transport layer.
When you create a package, it is assigned the standard transport layer
of the SAP System.
If you want to assign a different transport layer to a package, you
require the administration authorization for the Change and Transport
System.
The objects in a package automatically have the transport attributes
defined for the corresponding transport layer.
o If a consolidation route originating in their SAP System is defined,
then the objects are assigned to a transportable request, and
transported into the consolidation target when it is released.
o If a consolidation route is not defined, the objects are assigned to
a local request, and are not transported.
Customizing settings are not assigned to a package. They have the
transport attributes of the standard transport layer of the system or
client.
It is best to assign a package a standard transport layer for which a
consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the
Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
Release 4.0A and cannot be maintained.
Regards
Ben -
Object locked after Release and Transport to QAS/PRD
During an attempted recovery of our DEV system, a tranport request that had been previously released and transported to QAS/PRD was copied back into the DEV system, over-writing an open change request (and associated lock) on the program.
As a result the object shows as 'Locked' in DEV, but the lock entry is on a 'Released' transport.
I have reviewed tables E070 and E071, and as expected the entries for the program show that the transport was released.
Table TLOCK contains an entry for the program indicating that it is locked under the change request described above, that has already be released.
I logged a message with SAP, and was directed to create a new change request and assign the program to that request. While this does work, and allows me to make corrections and transport them, it does not assign a lock to the new transport, and does not clear the existing lock.
The other comment in the message was that once a transport is released, the only other option is to 'hack the tables', but I am not sure I am ready to go that route.
Has anyone ever encountered this situation, and if so, do you have any situations as to how to clear the lock entry ?
Thanks in advance for any assistance you can provide.
R. Runtz
SAP Support, Government of ManitobaHi Robert
You can unlock objects using transaction SE03:
SE03 > Requests/Tasks > Unlock Objects (expert tool)
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA -
Change and transport system not configured
hi
Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
How to fix this?
i appreciate your help in advance. Thanks
MadhuHi
After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
STMS is mainlly used for moving objects from one system to other system
Regards
kiran kumar.v -
Need latest SLD and NWDI version for PI 7.1 EHP1
Can any one update me the latest SLD and NWDI version for PI 7.1 EHP1?
Kindly provide me the path of implementation guides for SLD, NWDI which can be used with PI 7.1 EHP1. For PI 7.1 EHP1, can we use the same version of SLD and NWDI which used IN PI 7.1?
Please help me for the above questions.
Regards,
Yuvaraj.Hi Yuvaraj,
Please check the NWDI Development Infrastructure 7.11 and SLD 7.11 for the PI 7.1 EHP1.
Go to Service Market Place - Software Download > Support Packages and Patches > Support Packages and Patches - Entry by Application Group > SAP NetWeaver and complementary products > SAP NETWEAVER PI > SAP EHP1 FOR SAP NW PI 7.1 >Entry by Component > Development Infrastructure.
Hope it will helps
Regards
Arun Jaiswal
Maybe you are looking for
-
KM Scheduler Task in a Portal Dc
Hi Experts, Is it possible to use KM Scheduler task in a Portal Development Component .Please detail me how to deploy the .sda and schedule it. I am trying with a Portal Project and uploading the par file from NWDS,its working fine but with DC ,when
-
How do i set-up ipad nano for other user?
Hi, I want to buy my boyfriend an ipod nano for his birthday and set it up for him with all my music. I have a mac and he has a pc. How do i ensure that when i plug the nano for the first time it doesn't wipe all my songs? also can i set it up for hi
-
%@ include file= in a JSP
Please e-mail responses to [email protected] as well as this newsgroup: I have the following in a JSP that was originally designed for iPlanet: <%@ include file="../edeploy_global/GlobalVars.jsp" %> The JSP that contai
-
Camera Raw Plugin for Lightroom 4
When I try and edit a CR2 file in Lightroom (LR) 4, I keep getting a message that this version of LR requires a photoshop camera raw plugin of 7.4 or full compatibility. I get the option to cancel, render using LR which coverts this to a tiff file or
-
Can I change the colors on the number pad back to what they were before the update?