SLD Business System with or with out Logical System If so, which Log system

Hi
I'm in confuse with the Logical System when creating a Business System in SLD.
Our requirement is LEGACY -- PI/XI -- ECC.
When I create Business sytem in SLD, I need to give a Logical System. Which system (Is it xi/pi or ECC ) Logical System to be provided?
Thanks.

>
Pothana Yadav wrote:
> Hi
>
> I'm in confuse with the Logical System when creating a Business System in SLD.
> Our requirement is LEGACY -- PI/XI -- ECC.
>
> When I create Business sytem in SLD, I need to give a Logical System. Which system (Is it xi/pi or ECC ) Logical System to be provided?
>
> Thanks.
if you are using File to IDoc scenario then need to define logical systems for both business systems you are going to create for
i.e they will be used as sender and receiver partners in case of logical systems
if need more details check the below blog
/people/rajeshkumar.pasupula/blog/2009/03/16/unable-to-convert-the-sender-service-to-an-ale-logical-system
check the same for how logical system are used in this case...
note above will be helpful in case of only idoc scenario..else no need of creating logical systems even though target sysstem is ECC
HTH
Rajesh

Similar Messages

Source System not collected with business content Activation

I'm trying to activate some business content and have previously assign the source system (R/3). When I'm selecting an infosource and select as grouping in data flow before the source system is not collected.
This is a new BW 3.5 connected to a ECC. It has to be silly but I don't know what else to check. I was surprise to see that the source system was created with the icon of a BW system. But I think that this is just because the ECC appart of being an R/3 system is also a BW instance.
Well, any help appreciated and kindly rewarded.
Thanks,
Alberto Sabate

Thanks but,
I have tryed multiple times activating my infosources selecting only one source system, all of the available or none at all. No matter what I do the system collects only the Infosource with the communication structure but does not go down to the transfer rules and assignment of the available datasource.
I don't know what to do now. I'm obviously selecting the grouping with "in data flow before".
I'm running out of ideas.
Thanks all,
Alberto Sabate

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

eBay or Craigslist would be the only choice.

My old version mac book airdoes not start up so i tried to reinstall lion but it says its locked. how do i unloke it with out being able to start up the system.

my old version mac book air does not start up so i tried to reinstall lion but it says its locked. how do i unlock it with out being able to start up the system.

Could be. The "lock" isn't actually looking for a password.
WARNING: This will completely erase the ENTIRE hard drive.
What you would need to do is boot to recovery > disk utility > select the MAIN drive on the left side > partition > change partition layout from CURRENT to 1 PARTITION > ensure on the right side it says Format : Mac OSX Extended (Journaled) then push APPLY.
Then if it will allow us, close the windows until you see the 4 options popup again and select "Reinstall Mac OS X" select the Mac HD and you should be good to go!

I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC

I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC. The issue has been reported in Japanese by Microsoft. The translation is:
Phenomenon
In Windows Server 2008 or Windows Vista, you might not be able to log an error appears to apply the new update the following programs, if you try to log on after the restart. • MS12-024 (KB2653956)
• MS13-098 (KB2893294)
Error message displayed is as follows.
Incorrect password or user name
Back to the top | feedback
Collapse image Cause
This behavior occurs when you apply the update KB2653956 in the state of some data is damaged following registry key, or does not exist.
HKEY_LOCAL_MACHINE \ SCHEMA \ wcm :/ / Microsoft-Windows-CoreOS? ...
Any string will contain the part of the ... Note:. Also, make sure to load the SystemRoot% \ system32 \ SMI \ Store \ Machine \ SCHEMA.DAT file% if the HKEY_LOCAL_MACHINE \ SCHEMA does not exist.
When you apply the update of KB2653956 in the state where the registry key is not present, the value of the following registry is changed to MINWINPC, logon will not be able to.
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ActiveComputerName
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ComputerName
Back to the top | feedback
Collapse image Solution
If this occurs, change to the correct computer name the value of the ComputerName registry and ActiveComputerName start in safe mode, has been mentioned above, and then restart.
Back to the top | feedback
Collapse image Workaround
To prevent this phenomenon occurs, you download and run the System Update Readiness Tool from the following KB.
http://support.microsoft.com/kb/947821
By performing the system update Preparation tool registry that is described in Section Symptoms are repaired.
If the repair is made, starting with log Recreated missing key as the following WinDir% \ Logs \ CBS \ CheckSUR.log file% is recorded.
Recreated missing key:? Wcm :/ / Microsoft-Windows-CoreOS ... \ metadata \ elements \ ComputerName
In addition, regardless of the presence or absence of entry damaged Microsoft-Windows-CoreOS, you can set the value of the ComputerName key in this tool. For this reason, the following log is recorded in the CheckSUR.log.
Recreated value: @ _type.
Recreated value: @ dataOnly.
Recreated value: @ default.
Recreated value: @ description.
Recreated value: @ displayName.
Recreated value: @ handler.
Recreated value: @ legacyName.
Recreated value: @ legacyType.
Recreated value: @ migrate.
Recreated value: @ scope.
Recreated value: @ xsd: type.
Back to the top | feedback
Note: This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. It contains information in response to emerging issues are listed. As a result of the speed of information provided may be
typographical errors are included in the article, you might be revised at any time without prior notice. For other considerations, and use conditions
Please refer to.
Back to the top | feedback
Collapse image Property
December 11, 2013 - Revision: - Last Review: 2901584: 4.0 Document Number
This document that was written about products for.
• Windows Vista Business
• Windows Vista Business 64-bit edition
• Windows Vista Enterprise
• Windows Vista Enterprise 64-bit edition
• Windows Vista Home Basic
• Windows Vista Home Basic 64-bit edition
• Windows Vista Home Premium
• Windows Vista Home Premium 64-bit edition
• Windows Vista Starter
• Windows Vista Ultimate
• Windows Vista Ultimate 64-bit edition
• Windows Server 2008 Datacenter
• Windows Server 2008 Datacenter without Hyper-V
• Windows Server 2008 Enterprise
• Windows Server 2008 Enterprise without Hyper-V
• Windows Server 2008 for Itanium-Based Systems
• Windows Server 2008 Foundation
• Windows Server 2008 Standard
• Windows Server 2008 Standard without Hyper-V
• Windows Web Server 2008
• Windows HPC Server 2008
• Windows Essential Business Server 2008
We are having the issue on hundreds of systems and I am rolling out the readiness tool mentioned above to prevent other systems from being affected. In the mean time I have stopped deploying MS13-098 and am hoping Microsoft will go ahead and let all
of their customers know about the problem instead of just one country. Hopefully the original bulletin will be updated with this known issue.

PPoj,
Apple has offered replacement or pro-rated refunds in the US as a settlement of a class action lawsuit, not because of pride in their design-centric approach to their products. If you seek a similar replacement/refund program in India, then the odds are pretty good that you’d need a similar legal approach with which to convince Apple to offer a similar program there. If you’re unwilling to wait for such an event, then you can purchase a replacement power cable now, and hope for a pro-rated refund at some point in the future.

ATP Check Issue - No business system could be determined for logical system

Dear all
Got an issue while executing ATP check on a planned order in product view,
with a message: "No business system could be determined for logical system"
CIF setting wise:
regular business system group maintained and assigned in place,
master data wise:
business system group info fine in product master,
Is there anywhere suggested to check under ATP setting:
category, check mode, business event, check control/check instruction?
Your kindest enlighting is appreciated,
Thank you,
mandy

Dear Mandy,
usually this error is caused by a missing customizing entry:
spro:
Integration with SAP Components
   Integration via APO Core Interface (CIF)
     Basic Settings for Creating the System Landscape
       - Maintain Business System Group
       - Assign Logical System and Queue Type :
Please read the documentation for these two transactions and create the systems.
You need to specifiy there all systems that are in your BSG. The documentation for the customizing of 'name logical system' in APO says:
To enable the transfer of data between SAP R/3 and SAP APO, you need to name both the SAP APO system in which you are working and the SAP R/3 system to which you want to transfer data as logical systems.
I hope this helps.
Regards,
Tibor

AE 5.2 cross system risk analysis with CC 4.0

Hi,
We have an unique situation.
We have CC 4.0 (central) set up in ECC system where the rules and risks are defined for systems such as R/3, HR and SRM
We need AE to use this central CC system to do the risk analysis when an access request for HR or SRM is submitted in AE 5.2. Right now for a request to a HR system, risk analysis is being done in HR system where there are no rules and hence no risks are identified.
Environment :
CC 4.0 in ECC 5.0 with VIRSANH RTA 520_640 Level 3 and VIRSAHR RTA 520_640 Level 2
AE 5.2 JAVA in NW 7.0 SP level 2
Risk analysis for Access requests to ECC system is done with out any issues and the connectors in AE are defined as well as CC 4.0 configuration for cross system is enabled.
Please give your suggestions and also tell me if this below scenario is possible.
Use CC 5.2 Java stand alone system and define logical/cross system to connect to multiple systems such as HR and SRM and use those specific rules to do the risk analysis.
Thanks

Hi RM,
You can setup Risk Analysis inside AE Configuration.
You can identify the level of risk analysis and specify the Compliance Calibrator version for processing risks.
See the details from the AE Configuration Manual
In the Select Compliance Calibrator Version pane, from the Version drop-down list, select the version of Compliance Calibrator.
In the URI field, enter the appropriate URI address for the web services.
In the User Name field, enter your User ID. Your User ID must have security access
to web service.
In the Password field, type your password.
Select the Perform Org Rule Analysis option to perform org. rule analysis at risk
analysis time.
Note: There are two selectable versions of Compliance Calibrator. If you select 5.0 Web Service, three additional fields appear (URI, User Name, and Password). For the URI field, you need to navigate to the
SAP NetWeaver Web Application Server Home page > Web Services Navigator > CCRiskAnalysisService > WSDLs > Standard link of Document, where you will see a list of all web
services in the server. Select the desired URI address.
If you select Compliance Calibrator 4.0, there is no need to connect to a URI address
So the answer is YES, you can connect AE 5.2 with CC 4.0 for Risk Analysis.
Hope this helps,
Regards,
Kiran Kandepalli.

How do I get a 5.1 audio system to work with my Macbook?

So, I just got my new Macbook Pro 13 inch, and I was so excited to use it, but I realised the uh, speakers sucked. Right now I have some really crappy speakers plugged in through the audio out port, and it's not really making me happy. Not one bit. So, I'm getting a 5.1 surround sound audio system to make me not so depressed with my sound-lovingness, but I've run into the problem of not knowing how to plug one in, cause there isn't exaclty a place to put all those wires. I just need a little help from a fellow sound lover to figure this out, so I can at last let my room tremble with the magnificent power of a better-than-crappy sound system. Thank you very much!
Danke

Icapper wrote:
I will end up getting something other than Logitech speakers, since I'm just weird like that.
Your not weird, your a audiophile.
https://en.wikipedia.org/wiki/Audiophile
Good sound costs money. And with a 5.1 system your usually doing surround sound decoding for BlueRay movies etc. for home theater purposes.
The PC 5.1 surround sound systems require a audio card in a PC tower and mainly used for playing 3D games so that won't work for any Mac at all. So don't buy a PC 5.1 surround sound system for your Mac.
Harmon Kardon has the GoPlay, it's a portable stereo with awesome sound (not as good as their theater systems) and you can hook up a analog male/male stereo mini cable to it from the Mac.
$200 and it has a iPod dock and also takes like 8 batteries so it's portable.
http://www.amazon.com/dp/B002GHBTNC
There is also the Bose Wave clock/radio, you will need a stereo mini to RCA break out cable for that.
http://www.bose.com/controller?url=/shop_online/wave_systems/index.jsp
The GoPlay has much better sound than the Bose, I think the Bose are overpriced.

HT4400 I'm looking for a Braille note system that interacts with IPAD. This will be use in a classroom settings where you see both the braille & text communicated simultaneously.

I'm looking for a Braille note system that interacts with IPAD. This will be use in a classroom settings where you see both the braille & text communicated simultaneously.

This should be able to help ya out -> Support for wireless braille displays in iOS 6

Creating a system in portal with multiple instances of backend sys

Hi all,
I am creating a system in the portal to my backend system(ECC6.0 with integrated ITS).I had a multiple instance backend system.The 2 instances are on two different boxes .The 2 instances have different ip addresses and hostnames.At a time only one instance will be active.We have a virtual ip and hostname for the Central instance.
In this case how to create the system so that the portal can switch from one instance to other while it is changed at the backend.
The major issue is how to fill the ITS properties while creating the system.Which hostname I have to give.
First instance hostname : eccprd1.XXXXXX.com
Second instance hostname :eccprd2.XXXXXX.com
Vitual hostname of central instance : eccsap.XXXXX.com
Any suggestions please.
Thanx and Regards,
Rajesh.A

Hi,
You can use the Dynamic Link Library SAPSSOEXT
Check out this link.
http://help.sap.com/saphelp_nw04/helpdata/en/12/9f244183bb8639e10000000a1550b0/content.htm
This should be applicable to any intended scenario.
Summary of Steps
1. Download file
2. create application as shown in sample file.
3. Import verify.der and install it in your local server , in the place specified in your application(.NET)
4. Run the planned scenario. The page(.NET Page) that will be initially accessed from SAP Portal should run your program or have that code , so that it can authenticate it without requesting userid and password.

System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo),

Dear All,
I am getting a below error while doing ehp6 installation on sybase (high availbility )
can any one help me on this..?
An error occurred while processing option SAP Business Suite 7i 2011 > Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > SAP ASE > High-Availability System > Database Instance( Last error reported by the step: System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo), line (646) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp), stack trace: d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\ejscontroller.cpp: 181: EJSControllerImpl::executeScript() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\jsextension.hpp: 1059: CallFunctionBase::call() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\osmod\iaxxbprocess.cpp: 423: CIaOsProcess::start_impl() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 238: CSyChildApplicationImpl::start(false) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 262: CSyChildApplicationImpl::doStart() .). You can no
Regards,
Letz..

Hello Mauricio.
Thanks
Two Thinks:
1.- This error appears precisely in the process of creating SAP users including you mention sidadm:
      A.- Execute sapinst
      B.- Installation option is chosen
            SAP NetWeaver CE Production Edition
                    Installation Options
                        High-Availability System
                              Central Service Instance (SCS)
       c.- System ID, Next and appear message error
2.- However, the user manually create sidadm, I gave the permissions you indicate, and the error message is the same
Thanks

How do I get IE to read pdf's with a Windows 7 OS and acrobat 7 on my system?

How do I get IE to read pdf's with a Windows 7 OS and acrobat 7 on my system? It works with firefox. It worked previously but I think the automatic upgrade to reader 9.4 messed it up - so how do I fix it?

Hi,
It looks like the default association of your PDFs was set to Adobe Acrobat, when you installed Adobe Reader 9.4.0. I would request you to either uninstall Adobe Reader 9.4.0 and install it again. This time around, you will receive a window asking you to chose between Adobe Acrobat 7 and Adobe Reader 9.4.0 as the default PDF viewing application, make sure you select Adobe Reader 9.4.0 and continue on. This will associate Adobe Reader 9.4.0 as the default PDF viewing application and your internet explorer will be able to open PDFs without an issue.
If an uninstall seems out of the question, you can change the following registries to point to the path of AcroRd32.exe (i.e. the path wherein you have installed Adobe Reader 9.4.0. By default it would be something like: C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe). The quotes mentioned below are intentional and must be included.
i. HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe\(Default) - Change the value to "C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe"
ii. HKEY_CLASSES_ROOT\AcroExch.Document.7\shell\Open\command\(Default) - Change the value to "C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe""%1"
iii. HKEY_CLASSES_ROOT\AcroExch.Document.7\shell\Read\command\(Default) - Change the value to "C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe""%1"
This should set the default application to view PDFs as Adobe Reader 9.4.0 and let you view PDFs in browser as well.
Hope this works.
Ankit

Need information on Business Object XI R3 with Dashboard Design (Xcelsius)

Hi,
we are planning to install Business Object XI R3 with Dashboard Design (Xcelsius). In order to do this SAP has advised that we require Netweaver 7.0 Enhancement Pack1, Support Pack5.
Could you please let us know if it would take to upgrade and also any dependencies (do we also need to upgrade ECC, BI, SRM or Portal). we did not install EHP for any of the components in our landscape except solution manager (EHP1 SPS22).
Please help in providing the information.
Thanks,
Mohan K

Hi Jeff,
thank you very much for your prompt help.
But my query is do we need to upgrade any of the SAP components (ECC, SRM, Portal, MDM or SOLMAN) which are present in our landscape. no SAP components is of relase EHP except SOLMAN system.
Please suggest.
Thanks,
Mohan K

Part 2: Flat files and Business Contents: Any issues with this scenario?

I will appreciate some clarification on the some points made in response to my previous post "Flat files and Business Contents: Any issues with this scenario?"
1.
" ...youd better analyze those cubes for data redundancy and presence of data youll never use. " I will appreciate some clarification on the type of analysis you are referring to. Examples will help.
2.
"If you want to combine several found IOs in your custom dataprovider, then again you must know (or figure out) relationships between these IOs." I will appreciate some clarification on the type of relationship you are referring to. Examples will help.
3.
I am a bit confused with "..include into ODS structure ALL fields required for the cube" but you also noted noted that "...except navigational attributes and chars and KFs that are going to be determined in TRs or URs."
If you exclude ALL these, haven't you excluded all the fields you included in the ODS structure?
4.
"Consider carefully the ODS key fields selection. Their combination should not allow data aggregation that you dont need."
I may be missing the point here, I understand that you need to select the fields which will form the unique ID for the records in the ODS under the Key Field (please correct me if I am wrong with the purpose of the Key Field), but I don't understand the discussion of "aggregation" in the context.
Thanks in advance

Hallo
I try to give some exaplanation based on the previous answer.
1. Data redundancy - make sure you do not store the same information. does not make sense to have data redundanty across you Data Warehouse. this is also a cost. just sotre the same information one time if you get all what you need.
2. whatwhever you build you dp, which consist of IO, you need to know with kind of relation (1:1 or 1:n - n:n and so on) exist between them. that will help you when you model you infoprovider. For example I would never pit togheter IO (n:m) in the same dimension if you expect an high number of cardinality. Sometime an IO can be an attribute of another one (depend on relation. For example
Business Partner and his Address. Usually you have a relation 1:1, in this case address is an attribute of BParten and store it in the Masterdata instead then DP
3. Sometime when you load from ODS to CUBE, you can fill some IO (which are in the infocube and not in the ODS)through ABAP routine in TR-Start Routine of Update Rule. Does not make sense to include these IO in the ODS as they are NULL or Blank (the deault value). This can happen when for example, you first load in the ODS (Price and Quantity) and then you calculate Sell price later (Price * Quantity). of course it could be doen also in the Bex. Depends on other factors (Performance - Loaidng -Sizing)
4. Make sure that the KEY definition of ODS is accordingly to the data otherwise you will aggregate the data and later maybe if you need the detail you miss it.
for example: customer - product - Distr Chan - Sell Price
if each Customer can buy each product for any Distrution Channel, then when you build your ODS(Customer - Product and Distribution must be KEY) otherwise (if you have only Customer - Product KEY for example) you will lose the details for Distribution Channel.
I hope eveyrhting is clear
Regards
Mike

Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

Take each of the following steps that you haven't already tried.
1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
2. From the menu bar, select
 ▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
5. Reset the NVRAM.
6. Reset the SMC.
7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
8. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.

SLD Business System with or with out Logical System If so, which Log system

Similar Messages

Maybe you are looking for