SLD change

Hello,
We need to change SLD layout from what is depicted on the left side on the picture below to the solution depicted on the right side.
The reason for this is that services in SAP Landscape that depend on SLD are stopped during Solution Manager maintenance/restart. I read SLD documentation and based on it I proposed solution (right side of picture) that will allow continuous availability of services in SAP Landscape during Solution Manager maintenance/restart.
I do not have experience with SLD so I would like to know what do you think about this solution.
Also, what would be correct steps to make this transition? I would say I should have to install central SLD first and then sync it with local SLD on Solution Manager, then redirect data suppliers of systems in SAP Landscape to central SLD. Later I can add backup SLD and sync it with central SLD. Can cutoff from Local SLD be done in such way or should I stop local SLD until I redirect data suppliers?
Regards,
Sasha

Hi Sasha,
I'm in the middle of doing this exact thing myself right now, for the same reasons you outline. I'm separating our central SLD from Solution Manager. I'm not finished yet, about halfway through the process, but from what I've read and what I've achieved so far, I think you have the gist of it. Your outline looks reasonable to me. I don't think you need to actually maintain a local SLD on Solution Manager anymore once you have migrated all the content and repointed all the data suppliers to your new central SLD. You can configure LMDB to synchronize from a remote SLD, so once that last step is done, I think you can just 'abandon' the old local SLD on SolMan entirely.
So, here is what I've done so far:
Install new AS Java (version 7.4 SR1)Temporarily register it in existing 'old' SLD
Update AS Java to sps7
Enable SSL, create administrative usersConfiguring the Use of SSL on the AS Java - Network and Transport Layer Security - SAP Library
Initially configure new SLD
Post-Installation Checklist - Configuring, Working with and Administering System Landscape Directory - SAP Library
Configuring System Landscape Directory - AS Java Configuration - SAP LibraryThis included this step, and using it to configure the "System Landscape Directory" functional unit only:Java Functional Unit Configuration - SAP NetWeaver Library: Function-Oriented View - SAP Library
Migrate content from old SLD to new SLD (this is the step I'm in the middle of right now)
Demo: The Full Automatic Sync Feature in the SLD of SAP NetWeaver 7.1
SLD and LMDB Topology: Replacing the Source SLD for the LMDB
Once the initial unidirectional content sync is complete, the next steps will be:
Enable bidirectional content sync
Configure LMDB to sync with new SLD
Configure data suppliers to sync to new SLD
Disable bidirectional content sync
This method can be used to setup your backup SLD later as well, except you don't have to reconfigure LMDB or data suppliers, just install and set up the content sync. In that circumstance, you may want to explore using a Virtual IP address as well.
Regards,
Matt

Similar Messages

SLD change logs ?

Are there any change logs available to determine who made a change in the SLD to a business system, technical system etc ?

You mean something like http://<host>:<port>/sld -> Administration -> Change Log?

[SLD] change SWC production status

Hello,
I created a SWC in SLD with production status planned, but I'm not able to change this status. The documentation has not been extended since this Production State in SWCV SLD WAS 7.0 year.
Is the production status used for something? Which effect got every status? Got anyone experiences with this?
thanks
greetz
chris
Message was edited by:
Christian Riekenberg

Thanks a lot.
I don't like fields that have no use but just confusing the user
greetz
chris

SLD change for Portal 7.0 system

Hi Experts,
Need to change existing SLD for the time being in Portal system 7.0 which has totally 5 server nodes
In the visual admin, should I have to mention the new SLD entries in SLD data supplier for one server node ( cluster > server node 1 > services) (or ) in the rest of four server nodes togeather?
Is changing the SLD entry in one server node enough?
I tried to chnage in the global configuration , but dont see any entries for mentioning the SLD details.
I will appreciate your help and suggestion
Thanks in advance

Hi ,
Changed the SLD in server node 0 and it got reflected in other server nodes automatically.
In content admin, even the SLD connection test is working fine.
Now there is a problem in Jc0 connections.
Only the SSO -Jco connection test is getting successful but the Jco metadata connection fails with the error"
why the username/password Jco only fails.
the backend system is exist in the new sld as technical system with all logon groups
I will appreciate your help
Thanks in advance

Error on Component Monitoring On RWB after changing SLD .

Hi,
Guys If my below given questions are not clear to You ... >>>>>>>>>>>>Do ask me for Clearity
My PI 7.0 System was on Local SLD earlier, at that time My Scenarios/ RWB Components were Working Fine.
Now, On Place of Local SLD, We are onto Centerlise SLD on SOLUTION Manager.
after few Changes now my ESR and ID are getting product and Buisness System from Solution manager's SLD.
but ................. >>>>>>>>>>>
>
>>
>>>>
>>>>
On RWB - Component Monitoring - Each Component is coming into Red/Error mark.
So ..
Question : Is RWB is also effected from SLD Changes ???????
r
Facts Found during troubleshooting : -
>
1. In Solution Manager's SLD - Technical System - Exchange Infrastructure - Only one Technical System is Coming for Integration Server.
while
IN Old Local SLD - Technical System - Exchange Infrastructure - 6 different tecnical system was coming ( Integration Server/ RWB / Integration Engine / Adapter Engine ...etc)
Can this be the reason ????????
Please Suggest, What is Missing ?
for Sld Change following steps are performed .. .. . .
1. PI 7.0 like User Creation in Solution manager.
2. Changes in SLDAPICUST in PI System.
3. Changes Done in Excange Profile for SLDNAME.
4. Changes Done in Virtual Manager for SLDNAME.
5. RZ70 on new SLD.
Regards

Hi ,
Solution : After changing Local SLD to Domestic SLD , Error was Coming in RWB - Components ...
Solved by :
These are Documents Used for doing Changes in SLD When found Error on RWB.
764176 - Error in XI due to inconsistent SLD contents.
1031321 - Self-Registration of Adapter Engine and RWB fails
Problem has been solved.

How to Transport changes from Dev. to Quality and production

Hello Friends,
I've done the below changes in IR
1.Added idoc in Imported Idocs
2.Added new Interface Mapping
3.Added new Message Mapping
In ID:
Chagned Receiver Agreement
Changed Interface Agreement
Please let me know how i can move the changes to Quality and Production..
Pls. provide me the steps to create Transport and how to transfer.
Thanks in advance!!!
Best Regards
Prasad

Hi,
By using File system or cms you can transport, better to do the configuration steps manually to avoid ther errors.
We can do some changes to move
Moving Dev to QA changes
1.SLD: are there any changes we need to do.
If you have common SLD, then I doubt if you may need any changes on SLD side.
The Business systems you had used will be the same you may use in Q-Landscape.
2.IR: are there any changes we need to do.
---> No changes required, you need to export .tpz file from Development box and have to import it in Q-box
3.ID: do we need to recreate it fully or after importing,just change the Communication channels will
do.I am confused here.
You need to reconfigure all communication channels, if SLD changes are OK then business system will
change automatically and in communication channel just filled in correct IP/password etc.
---> Similar to IR, you can transport these objects also. But you may need to do related changes to communication channels, if you will be referring to different Sender systems and Receiver systems.
Then as mentioned in previous posts you may need to maintain those Business systems in SLD also.
4.RWB: such as alerts,and if there are any...
--> The Alerts will not be transported....you need to create it as new setup for every box.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm

SLD Business System Mapping Problem

Hi Experts,
i am facing a problem in Quality Environment, we have imported the all ir and id objects in to QA ,
my problem is the business system showing on integration directory ECCSystem (QA1CLNT400) but actual Business System want to show on integration directory is ECCSystem(QA0CLNT400) , some where the SLD Mapping we got a problem. Please help me out how to fix this issue. ,
1. How to Map Exact Business System in SLD. ?
2. To refelect the SLD Changes in ID we need restart ?
Thanks and Regards
G.Praveen Kumar

> my problem is the business system showing on integration directory ECCSystem (QA1CLNT400) but actual Business System want to show on integration directory is ECCSystem(QA0CLNT400) , some where the SLD Mapping we got a problem. Please help me out how to fix this issue. ,
>
first check in dev SLD what is the trasported target defined for Dev bussiness system .
> 1. How to Map Exact Business System in SLD. ?
If trasport target defined as QA1CLNT400 then change it to QA0CLNT400 in Dev SLD.
> 2. To refelect the SLD Changes in ID we need restart ?
>
no need to restart anything.
refer my blog
/people/rajasekhar.reddy14/blog/2011/02/21/transport-targets-and-groups-in-the-sld
Regards,
Raj

SLD export

Hi there,
We are building a parallel landscape for PI and would like to have an exact copy of our existing Dev system with a different SID.
The method we are using is fresh installation with export/import of content from source to target. I need some guidance on the approach .
1) I have taken the export of the sld data from administration-> data. when importing in the target system, do I need to install the CR and CIM content before hand to the same level or will this export taken in source suffice.

Hi,
Hi,
Can you please refer to the documentation on the SAP
Community Network System Landscape Directory (SLD)
e.g. Planning Guide
User Manual (NW 7.1)
and others
The following SAP Notes may also be of interest for this issue:
Splitting an SLD instance 936318,
935245,
669669
Provided that you indeed do not yet have any important data in the
target namespace, you can clear the target namespace under
"Administration" - "Namespace". Select the namespace and delete
it. Namespace sld/active will be recreated automatically. You'll only
need to reimport the model as required.
2) Target SLD
- Change object server name from "localhost" to a unique name as per note 935245,
- delete and recreate namespace sld/active
- check the profile parameters
- import latest model (same as in source SLD)
- import backup from source SLD.
Regards,
Aidan

SLD 7.1 full sync bidirection

Hello,
I've configured a bidirectional full synchronization between two SLD 7.1 (DEV <--> TST).
When I try to delete a third-party technical system in DEV, the system returns because of the synchronization. Why the deletion doesn't work ?
Any ideas?
Dimitry Haritonov

Hi Dimitri!
Did you already try to work with different namespace rankings, that is your DEV SLD gets a higher ranking than your TST SLD. Autmatic conflict resolution that gives priority to DEV SLD changes.
See also here https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b09fe69e-46be-2a10-9fb0-9c11aeaa3557
Regards,
Volker

R3PROD2B1ITEM problem

Hi all,
i have a problem with transmission of MATMAS from ECC 6.0 to B1 8.8.
In B1i i've configured everything (landscapes with connection test OK, process activated) using the BIU R3PROD2B1ITEM.
In ECC I've configured all the elements of the communication chain: RFC port, Logical System, Distribution Model, Partner Profiles and so on.
When i create a new PROD with transaction MM01, IDOC is succesfully created and sent to Logical System defined for B1i (system of type T, TCP/IP), and the IDOC status is 03.
In B1i the message received is in the FAILURE status with the error: Sender SysId, Sender ObjectType or Sender payload is missing
The message received in B1i is the following:
<xml version="1.0" encoding="utf-8" ?>
- <b1im:B1IMessage xmlns:b1im="urn:com.sap.b1i.sim:b1imessage" xmlns:b1il="urn:com.sap.b1i.sim:b1ilog" xmlns:bfa="urn:com.sap.b1i.bizprocessor:bizatoms" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" MessageId="11072009124281108842C0A8006B46E1" BeginTimeStamp="20110720091242" LogOn="true" Validity="true">
- <b1im:Header>
- <b1im:Sender>
- <sim:SysId xmlns:sim="urn:com.sap.b1i.sim:entity" Id="0010000103" Name="ECC" SysTypeId="ECC6.0" ConnectivityMode="local">
- <sim:ConnectivityList>
<sim:Connectivity ConnectivityTypeId="RFCA" IsPreferred="true" Mode="active" />
<sim:Connectivity ConnectivityTypeId="RFCP" IsPreferred="true" Mode="passive" />
<sim:Connectivity ConnectivityTypeId="WSAN" IsPreferred="true" Mode="active" />
<sim:Connectivity ConnectivityTypeId="WSAS" IsPreferred="true" Mode="active" />
<sim:Connectivity ConnectivityTypeId="WSAO" IsPreferred="true" Mode="passive" />
<sim:Connectivity ConnectivityTypeId="WSAR" IsPreferred="true" Mode="passive" />
</sim:ConnectivityList>
- <sim:PropertyList>
<Property xmlns="urn:com.sap.b1i.sim:entity" Key="HQs Vendor number" Value="" Description="B1I_SI_STD_200001" />
</sim:PropertyList>
</sim:SysId>
</b1im:Sender>
<b1im:Receiver />
<b1im:System />
<b1im:RoutingList />
<b1im:ReceiverList />
<b1im:Extra />
<b1im:R3OutboundMethod>/com.sap.b1i.datasync.pattern/SYS102_R3Outbound/SYS102_R3Outbound_std.bfd</b1im:R3OutboundMethod>
</b1im:Header>
- <b1im:Body>
- <b1im:Payload ObjectTypeId="" ObjectRole="S">
- <IDOC_DATE_TIME_GET xmlns="urn:sap-com:document:sap:rfc:functions">
<SELECTION_DATE>0000-00-00</SELECTION_DATE>
<SOURCE_SYSTEM />
<T_IDOCINFO />
</IDOC_DATE_TIME_GET>
</b1im:Payload>
</b1im:Body>
</b1im:B1IMessage>
In ECC, the connection test to RFC destination of B1i is OK.
In transaction BD87, if i check the trace of IDOC, i get the following error:
Error for the remote call of method IDOC_DATE_TIME_GET in system B1I, message JCO.Server could not find server function '䥄佃彄䅔䕟呉䵅
Seems that the message sent from ECC to B1i is not MATMAS but a call to IDOC_DATE_TIME_GET...
Do you have some idea for this issue?
P.S. The transmission from B1i to ECC (B1PO2R3SO) work fine and the order is correctly posted in ECC.

Hi Marco,
last friday I had the same issue at another customer system.
After searching quite some time and checking the correctness of all settings, we found it:
In transaction SM59, the RFC TCP/IP connection representing B1iSN was defined as "NON-UNICODE" system.
In fact ECC was a UNICODE system, so we changed following:
1. In transaction SM59, please change "Communication Type with Target System" setting towards Unicode.
2. In B1iSN SLD change the RFC passive (RFCP) connection towards unicode = true.
After these changes, B1iSN receives the IDocs as expected.
Best regards
Bastian

Unidentified error when testing recordset, help please!

Hi,
I have created a dsn and a connection string that test fine on my web host (crystaltech), but I get an unidentified error when I test them on DW CS4. Any thoughts?
This is my connection string:
"Provider=Microsoft.Jet.OLEDB.4.0; Data Source=D:\inetpub\bnicrossroadsconnections\dbs\members.mdb;"
which generates this code:
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="true"
' Catalog=""
' Schema=""
Dim MM_testConn_STRING
MM_testConn_STRING = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=D:\inetpub\bnicrossroadsconnections\dbs\members.mdb;"
%>
My dsn code is:
<%
' FileName="Connection_odbc_conn_dsn.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="true"
' Catalog=""
' Schema=""
Dim MM_memberconn_STRING
MM_memberconn_STRING = "dsn=memberdsn;uid=bnixroads;pwd=pass;"
%>
What am I doing wrong?
Many thanks!!!

You have to install Integration tool first and then the DB. Try this , via sql take all the companies offline and refresh your SAP B1 login. The companies will not be visible. Restart integration services. Make the companies Online.
In the SAP DB change the B1i password. It should be same as the B1i admin password.
Go to SLD, change B1user password.
Logout
Refresh Integration service.
Check the SLD connection.

XI system specific..

Hi frnds,
i want to know what are the system specific changes that we do in XI. by system i mean any specific changes in quality or in production . Actualy i want my acceptance server to point to the acceptance of the other non sap system to which we are sending data . Same applies for production .
Any ideas.
Rohit

There could be many things falling into these category.
e.g. - all RFC destinations pointing to various systems.
- various performance related parameters based on the adapters involved
- SLD Change
- ID related changes after import of ID objects
Regards,
Prateek

88 Software Dependencies Imported Into CMS Track

We are experiencing problems when associating SCs to a Track in the CMS. When any of the SCs are selected, it shows a total of 88 dependencies when only 3 are defined in the SLD (SAP-JEE, SAP_BUILDT & SAP_JTECHS).
The "Update CMS" action to pull in the SLD changes does not fix it and communication between the SLD & CMS appears to be fine. As well, this was working but just recently began acting this way.
Has anyone experienced this, know what would cause the inconsistencies, and/or know how to fix it?
We are unable to create new Tracks due to this, so any assistance would be greatly appreciated.
Many thanks,
Lane

We've been working with someone at SAP America to track down the problems and find a solution. From our research it appears this is related to either an incorrect CIM import or manual assignment of usage dependencies for the 3 primary software components mentioned earlier.
We are in process of either re-importing the CIM for the current patch level of the SLD and/or manually removing the dependencies from the SCs. I will update after this is complete and we have the results.
Pascal, thanks for posting interest in this message.
tlb

Please help! Error when testing connection, (-111) Unable to access SBO-Com

Hi everyone,
I have set up and installed the integration component on a customers site because they would like to use the dashboards and mobile solutions.
I set up a company in the SLD but I cannot get the connection to work, i only get the following message
com.sap.b1i.adapter.dia.exception.ConnectionFailedException: Connect to Business One failed.
(-111) Unable to access SBO-Common database
{b1Server=10.14.75.110, company=SAP_INUIT_AB, licenseServer=10.14.75.110:30000, dbType=6, dbUser=sa, userName=B1i}
I have used the ip-adress instead of logical names.
I cannot figure out whats wrong, I have been searching for hours..
Any ideas??
Thanks
Br
Anders

You have to install Integration tool first and then the DB. Try this , via sql take all the companies offline and refresh your SAP B1 login. The companies will not be visible. Restart integration services. Make the companies Online.
In the SAP DB change the B1i password. It should be same as the B1i admin password.
Go to SLD, change B1user password.
Logout
Refresh Integration service.
Check the SLD connection.

Transporting objects from Development System to Testing,Quality and Produtn

Hi Experts,
We have developed one scenario in our project in Development System.
Now we need to transport the same to Testing System and test it there and then transport to Quality system and after that to production system.
Can any one let me know what are all the steps required for transporting like
1) like wat are all the SLD changes to be done.
2) Do I need to create all the SLD settings of development in testing and Quality as well.
Also please let me know if there are any other things other than SLD settings.
Regards,
Pruthvi

Hi Pruthvi,
>But I didnt get a clear idea of what exactly needs to be done.
Please explain kindly what exactly you are missing or did not understand. If you just want to have an overview please read: [SAP help: Transporting XI Objects|http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm]
Regards,
Udo

SLD change

Similar Messages

Maybe you are looking for