SLD (CIM_ERR_ALREADY_EXISTS : INSTANCE ALREADY EXISTS )
Hi All,
While creating SLD at Step 6
Select one or more Software product and then software component that are installed in this system
I have selected below items
Installed product Installed Component
SAP Web AS 7.00 ; SAP J2EE ENGINE 7.00
I am getting an Error
CIM_ERR_ALREADY_EXISTS-Instance already exists.
Thanks in advance
Arun
See
Re: CIM_ERR_ALREADY_EXISTS: Instance already exists: .........
Regards,
Slava
Similar Messages
-
SLD configuration in already existing Solman system
Hello,
We already have dedicated central SLD in our landscape but now we want to configure SLD in already existing SOLMAN and decommission the existing one.
Can anyone suggest how to configure SLD in already installed SOLMAN (may be high level step by step process)?
Thanks & Regards,
NKHi Nitin,
What will be the purpose of SLD of solution manager ?
eg. 1631346 - Solution Manager 7.1: SLD configuration for PI monitoring
You can add this SLD with a higher rank than the older SLD but lower than LMDB in solman_setup.
Refer:Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
https://help.sap.com/saphelp_sm71_sp05/helpdata/en/a5/971735dd184f5c8d943c6cf423d13a/content.htm
Divyanshu -
Install error: J2E already exists
I had to abort my first installation of the Java Sneak Preview, because my C: drive was running out of space. I am using a 2nd disk for the database. After carving out some more room on C:, I tried to cleanly and thoroughly wipe out all traces of the failed install before trying again. Unstalling MaxDB from Windows's Add/Remove Programs wouldn't work (I don't remember the exact error, but it was running the uninstall script with -all and reported it couldn't do this because I needed to get rid of an instance first ???). Since the database was on my removable D: drive, I finally got rid of it the old fashioned way: I reformatted the disk. I also deleted any trace of "J2E" I could find in the Windows XP registry. Nevertheless, my retry of the Sneak Preview install fails on a sapdb_db_create statement, with the root problem as reported in XCMDOUT.LOG that J2E already exists:
> Subprocess starts at 20051107193441
Execute Command : d:sapdbprogramspgmdbmcli.exe -R d:sapdbj2edb db_create J2E CONTROL,CONTROL
Execute Session Command : exit
> Subprocess stops at 20051107193441
ERR
-24953,ERR_DBEXIST: database instance already exists
Since I literally wiped out the database, can anyone tell me where the installation is still detecting the existence of J2E? How can I get rid of all traces?
And since the initial problem I had was too little free disk space on my C: drive, and since I bought a second hard drive precisely to get around this problem, is it possible to direct not just MaxDB but the Was 6.40/J2EE Engine itself to my D: drive (it seemed to install on C:\usr\... without my having any choice in the matter)?Roland,
That worked: After dropping the instance, I was able to cleanly deinstall MaxDB and try the Sneak Preview installation from scratch. I've rewarded points accordingly.
However, I then ran into another problem perhaps you can help with. I will explain it here, but please let me know if you would like me to post it in a new thread, so you can potentially get separate points for this one :-).
So here's the new problem: The installation hung during the 22nd task, Load Java Database Content. I let it run about 12 hours, before giving up, clicking Log Off, and rebooting my laptop. In jload.java.log, there are entries for the first couple minutes after that task began, then nothing. So after rebooting my machine, I crossed my fingers and tried to recontinue the installation, but I get an error, the root cause of which seems to be that the database needs to be restarted?:
java version "1.4.2_10"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_10-b03)
Java HotSpot(TM) Client VM (build 1.4.2_10-b03, mixed mode)
Nov 9, 2005 12:29:51 PM com.sap.inst.jload.Jload main
INFO: Jload -sec J2E,jdbc/pool/J2E,C:usrsapJ2ESYSglobal/security/data/SecStore.properties,C:usrsapJ2ESYSglobal/security/data/SecStore.key -dataDir D:/SP/NW04SneakPrevJavaSP11/NW04SneakPrevJavaSP11/NWSneakPreviewSP11/SAP_NetWeaver_04_SR_1_Installation_Master_DVD__ID__51030843IM01_NT_I386....SneakPreviewContentJDMP -job C:Program Filessapinst_instdirNW04SR1WEBAS_COPYONE_HOST/IMPORT.XML -log C:Program Filessapinst_instdirNW04SR1WEBAS_COPYONE_HOST/jload.log
Nov 9, 2005 12:29:52 PM com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://IBM-GIBBONS/J2E [Restart required].
Any idea why the 'load database content' task hung? (By the way, I have 1 GB of RAM - should be enough?) And should I manually restart the database and try to continue? If so, how do I manually restart the database from the command line?
(Again, let me know if I should repost this in a new thread. Thanks in advance.) -
Hi All,
I cant get to stop SharePoint foundation web app service. Its stuck on status stopping
I have tried the following:
reset IIS
restarted the Timer Service
When I try to use powershell command to stop I get the following error:
Can anyone who went through this help PLEASE
Stop-SPServiceInstance : An object of the type
Microsoft.SharePoint.Administration.SPServiceInstanceJobDefinition named
"job-service-instance-1ff39eb2-12d2-457d-a749-265e350eb1b1" already exists
under the parent Microsoft.SharePoint.Administration.SPTimerService named
"SPTimerV4". Rename your object or delete the existing object.
At line:1 char:127
+ ... pplication"} | Stop-SPServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...ServiceInstance:
SPCmdletStopServiceInstance) [Stop-SPServiceInstance], SPDuplicateObjectEx
ception
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletStopServ
iceInstanceHi,
It seems that the issue is in the timer job definition for executing this operation.
My suggestion is to start the service again and delete the job definition from the error and again try to stop it.
This might be helpful:
http://sharepoint.stackexchange.com/questions/22368/is-there-a-powershell-cmdlet-to-delete-a-timer-job
I had a lot of issues in the past when try to stop this instance after the Web apps are provisioned.
As general rule now If I have multi-server Farm topology that has servers that should not serve Web App requests I turn off the service prior to provisioning any Web Apps in the Farm.
BR,
Ivan -
WDA Error : An instance of popup view already exists in the application
Dear Experts,
I have used a popup in my WDA application which gets opened on the click of the button. Whenever the application is launched for the first time and when I click on the button to display the pop up I get the error "An instance of popup view already exists in the application"; when I close the application, relaunch it once again and click on the button to open the popup, it works fine. What would be the reason for this behaviour?
My piece of code is as follows,
try.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
CALL METHOD lo_window_manager->CREATE_WINDOW
EXPORTING
WINDOW_NAME = 'POP_UP_QOH'
TITLE = 'Stock Overview'
BUTTON_KIND = IF_WD_WINDOW=>CO_BUTTONS_OK
MESSAGE_TYPE = IF_WD_WINDOW=>CO_MSG_TYPE_NONE
CLOSE_IN_ANY_CASE = ABAP_TRUE
RECEIVING
WINDOW = LO_WINDOW
CALL METHOD LO_WINDOW->OPEN
CATCH CX_WDR_RT_EXCEPTION.
ENDTRY.
Kindly please help to resolve the issue.
Warm Regards,
KanthimathiHi Viji,
I now changed my piece of code as follows,
if lo_window is initial.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
CALL METHOD lo_window_manager->CREATE_WINDOW
EXPORTING
MODAL = ABAP_FALSE
WINDOW_NAME = 'POP_UP_QOH'
TITLE = 'Stock Overview'
CLOSE_BUTTON =
BUTTON_KIND = IF_WD_WINDOW=>CO_BUTTONS_OK
MESSAGE_TYPE = IF_WD_WINDOW=>CO_MSG_TYPE_NONE
CLOSE_IN_ANY_CASE = ABAP_TRUE
RECEIVING
WINDOW = LO_WINDOW
CALL METHOD LO_WINDOW->OPEN
endif.
but still facing the same problem. By the way what does the message type argument mean here?
Regards,
Kanthimathi -
Trying to create ASM instance, thinks one already exists?
I've got a problem with creating the ASM instance. Basically, I've reinstalled (v11.1.0.6) clusterware, and two database software installs (one for asm, one for db) due to a san swap. Now, I believe that there is still a hangover to the original installation. When creating the ASM instance through DBCA on Windows, I get the following:
DBCA could not startup the ASM instance configured on this node. To proceed with ASM diskgroup management you need the ASM instance to be up and running. Do you want to recreate the ASM instance on this node?
Yes
Enter password
DBCA will now create and start the ASM instance. After the ASM instance is started, you can create disk groups to be used as storage for your database.
OK
ASM Instance Creation...
Encountered file error when copying listeners from home=D:\oracle\product\11.1.0\asm_2
OK
The operation will be stopped. Re-run DBCA after successfully running NetCA.
I have a listener running (listener_rac), I have a similar problem with netca as it says I already have a listener called listener, which I do not, however, I have created listener_rac instead.
I feel trhat the problem is that ASM1 (for node 1) or ASM2 (for node 2) already exists. However, I can not find either of these. I can create an ASM instance in single node mode, however, this creates an instance +ASM, which does not conflict.
How do I find the non-existent instance, and remove it? (not in registry or services)
Alternatively, any other ideas as to what is happening?
Thank you for your time.I have a listener running (listener_rac), I have a similar problem with netca as it says I already have a listener called listener, which I do not, however, I have created listener_rac insteadDBCA created your listener... you can check on listener status
srvctl status nodeapps -n node01
Listener is running on node: node01
srvctl status nodeapps -n node02
Listener is running on node: node02
if not start, start it by
Usage: srvctl start listener -n <node_name> [-l <lsnr_name_list>]
srvctl start listener -n node01
by the way, you cam use "netca" delete/recreate (listener_rac)
After that, point to ASM:
I feel trhat the problem is that ASM1 (for node 1) or ASM2 (for node 2) already exists. However, I can not find either of these. What did you see?
crs_stat
srvctl status asm -n node01
srvctl status asm -n node02
if you see asm on node01/node2... you can start them if thet offline
srvctl start asm -n node01
srvctl start asm -n node02
and then.. use "DBCA" to help create ASM diskgroups.
I can create an ASM instance in single node mode, however, this creates an instance +ASM, which does not conflict.that can conflict.. don't start it (+ASM)
How do I find the non-existent instance, and remove it? (not in registry or services)
Alternatively, any other ideas as to what is happening?use "crs_stat" command
http://download.oracle.com/docs/cd/B28359_01/rac.111/b28255/crsref.htm#CWADD6025
and use "srvctl"
http://download.oracle.com/docs/cd/B28359_01/rac.111/b28254/srvctladmin.htm#RACAD028 -
Updates are not installing already exists, will modify existing instance.
hi all
I have published updates via scup and seeing below message in update store log its not updating old version what is this message means
Update status from update (c2f61a88-730e-47af-8119-6e3b5a789764) already exists, will modify existing instance.
ankithThat just means that the client already scanned for compliance, scanned again now and found out that the state for that patch (installed, required, etc) has changed.
Torsten Meringer | http://www.mssccmfaq.de -
Folder name already exists error when activating feature
HI,
I am creating a document library and adding folders to it using elements.xml in VS 2012.
First time deployment of the item works fine, the folder is created. But further deployment or activation of feature from site features is throwing the error "Folder name already exists".
Below is the elements.xml of List Instance, which was modified to add the folders.
<ListInstance Title="TestLibrary" OnQuickLaunch="FALSE" TemplateType="101" FeatureId="Guid" Url="Lists/TestLibrary" Description="TEST Library List Instance">
<Data>
<Rows>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_One</Field>
<Field Name="Title">Test_One</Field>
<Field Name="FSObjType">1</Field>
</Row>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_Two</Field>
<Field Name="Title">Test_Two</Field>
<Field Name="FSObjType">1</Field>
</Row>
</Rows>
</Data>
</ListInstance>
How to fix this?
ThanksHi,
According to your post, my understanding is that you got “Folder name already exists error when activating feature”.
I had used the following code snippet to create a folder within a document library, it didn’t throw errors when reactive the feature.
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="LibTest"
OnQuickLaunch="TRUE"
TemplateType="10000"
Url="Lists/LibTest"
Description="My Lib Instance">
</ListInstance>
<Module Url="Lists/LibTest/Folder1" />
</Elements>
http://shareden.blogspot.com/2012/11/creating-feature-with-image-library.html
Also, when you redeploy the project, it will give you a dialog which would promote to delete the existed list or not.
If you click the “Resove Automatically”, the visual studio would delete the existed list automatically, and create a new list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
SQL 2008 R2 Management Tools Install Fails - The specified account already exists
Hello,
The installation SQL 2008 R2 Management Tools on a Windows 7 workstation fails with the error, The specified account already exists.
Below is the Summary Log.
Thanks.
Paul
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-10-20 09:02:16
End time: 2014-10-20 09:05:57
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141020_085102\sqlncli_Cpu64_1.log
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: WS287
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location:
\\SRVDIA18\MSSQL2008R2Install\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141020_085102\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141020_085102\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141020_085102\SystemConfigurationCheck_Report.htm
The specified account already existsThere is definitely more amusing endeavours in this world, than trying to understand why an SQL Server install failed. The log files are verbose - but somehow the real information about what went wrong seems to be hiding. Never have proverb about not being
able to see the forest for all the trees felt more appropriate.
Nevertheless, this is where things go sour:
MSI (s) (F4:EC) [09:04:15:744]: Resolving source.
MSI (s) (F4:EC) [09:04:15:744]: Resolving source to launched-from source.
MSI (s) (F4:EC) [09:04:15:744]: Setting launched-from source as last-used.
MSI (s) (F4:EC) [09:04:15:744]: PROPERTY CHANGE: Adding SourceDir property. Its value is '\\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\'.
MSI (s) (F4:EC) [09:04:15:744]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is '\\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\'.
MSI (s) (F4:EC) [09:04:15:744]: PROPERTY CHANGE: Adding SourcedirProduct property. Its value is '{2180B33F-3225-423E-BBC1-7798CFD3CD1F}'.
MSI (s) (F4:EC) [09:04:15:744]: SOURCEDIR ==> \\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\
MSI (s) (F4:EC) [09:04:15:744]: SOURCEDIR product ==> {2180B33F-3225-423E-BBC1-7798CFD3CD1F}
MSI (s) (F4:EC) [09:04:15:744]: SECREPAIR: CryptAcquireContext succeeded
MSI (s) (F4:EC) [09:04:15:744]: Determining source type
MSI (s) (F4:EC) [09:04:15:744]: Note: 1: 2203 2: \\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\SQL ODBC Native Client 10 - 64bit.msi 3: -2147287038
MSI (s) (F4:EC) [09:04:15:744]: Note: 1: 1316 2: \\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\SQL ODBC Native Client 10 - 64bit.msi
MSI (s) (F4:EC) [09:04:15:744]: SECREPAIR: Error determining package source type
MSI (s) (F4:EC) [09:04:15:744]: SECUREREPAIR: SecureRepair Failed. Error code: 524F91D34B8
MSI (s) (F4:EC) [09:04:40:775]: Product: Microsoft SQL Server 2008 R2 Native Client -- Error 1316. The specified account already exists.
What account? I supposed you have already asked yourself that and just shaken your head.
But there is another error code 2203, NET HELPMSG 2203 says "The password parameter is invalid." And I note that the source is apparently on a share.
So where is my guess: the MSI installer - which runs as a service, somehow does not have permissions to read the installation from the share. Or is trying to log on to the share with your username/password? No, I don't know, I am just speculating widely.
But my advice would be to copy the installation directory from the share to a local disk.
Maybe that CryptAcquireContext is significant as well - I don't know.
Oh, wait, here is something just before the section above in the log:
MSI (s) (F4:EC) [09:04:15:729]: Note: 1: 2205 2: 3: Environment
MSI (s) (F4:EC) [09:04:15:729]: Note: 1: 2228 2: 3: Environment 4: SELECT `Name`,`Value` FROM `Environment`,`Component` WHERE `Component_`=`Component` AND (`Component`.`Action` = 1 OR `Component`.`Action` = 2)
Action start 9:04:15: WriteEnvironmentStrings.
2205 is "The logon processor did not add the message alias." I see that in a successful log that I have, so that is probably benign. But 2228 seems to be
"There are too many names in the user accounts database."
Exactly what that means, I have no clue, but it could be a Windows problem.
Erland Sommarskog, SQL Server MVP, [email protected] -
Hi,
I try to install, the SQL Express 2008 R2 with Advanced
The installation has only one error (Error 1316. The Specific account already exists.) and the Management Tools Basic setup is failed.
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Start time: 2015-01-02 16:17:17
End time: 2015-01-02 16:24:01
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SSCRuntime_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?
LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4000.0
Machine Properties:
Machine name: KHPNHSI_BNANG
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: g:\41bee43707e62fab54ec\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 2
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,SSMS,SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLExpress
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: g:\41bee43707e62fab54ec\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: PSI\ssamnang
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SystemConfigurationCheck_Report.htm
Please help!
Samnang.Hi SSamnang,
According to your description, you come across the error that the specific account already exists. Please help to share the complete error log in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150102_161500\SSCRuntime_Cpu32_1.log. You could
use google drive to upload the error log following the steps in the article:
https://support.google.com/drive/answer/2424368?hl=en
From the exception help link, we notice that, the issue could be due to that an attempt fails to install SQL Server Native Client on a computer where SQL Server Native Client is already installed.
I recommend you to check if there is already an existing SQL Server Native Client on your computer. If there is an existing one, you could uninstall it and install SQL Server again.
In addition, there is a similar thread for reference:
https://social.technet.microsoft.com/Forums/en-US/dc31bffd-c9e2-4630-b5d7-9252b03c24fe/sql-2008-r2-management-tools-install-fails-the-specified-account-already-exists?forum=sqltools.
Regards,
Michelle Li -
Restore (file already exists)
Hello
1-)Why does restore fail in below scenerio?
2-)'C:\TEST.DBF' datafile is not in my backupset,Why oracle attempts to restore it?
rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Sun Jul 26 12:29:42 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: XE (DBID=2563855341)
RMAN> backup database;
Starting backup at 26-JUL-09
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=38 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00003 name=C:\ORACLEXE\ORADATA\XE\SYSAUX.DBF
input datafile fno=00001 name=C:\ORACLEXE\ORADATA\XE\SYSTEM.DBF
input datafile fno=00002 name=C:\ORACLEXE\ORADATA\XE\UNDO.DBF
input datafile fno=00004 name=C:\ORACLEXE\ORADATA\XE\TEST1.DBF
input datafile fno=00005 name=C:\ORACLEXE\ORADATA\XE\TEST2.DBF
input datafile fno=00006 name=C:\ORACLEXE\ORADATA\XE\TUNTEMP.DBF
channel ORA_DISK_1: starting piece 1 at 26-JUL-09
channel ORA_DISK_1: finished piece 1 at 26-JUL-09
piece handle=C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\BACKUPSET\2009_07_26\O1_MF_NNNDF_TAG20090
726T122957_56R8JRNJ_.BKP tag=TAG20090726T122957 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:02:18
Finished backup at 26-JUL-09
Starting Control File and SPFILE Autobackup at 26-JUL-09
piece handle=C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2009_07_26\O1_MF_S_693232337_5
6R8O2N0_.BKP comment=NONE
Finished Control File and SPFILE Autobackup at 26-JUL-09
C:\Documents and Settings> sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Jul 26 12:32:44 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
sys@XE> create tablespace test datafile 'C:/test.dbf' size 3m;
Tablespace created.
sys@XE> shut immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
RMAN> restore database;
Starting restore at 26-JUL-09
using channel ORA_DISK_1
creating datafile fno=7 name=C:\TEST.DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 07/26/2009 12:41:17
ORA-01119: error in creating database file 'C:\TEST.DBF'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already existsIf I restore old controlfile, it again gives the same error,old controlfile doesnt aware of the new tablespace, and this new datafile is not in my backupset. so why it gives this error?
RMAN> restore controlfile from autobackup;
Starting restore at 26-JUL-09
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=35 devtype=DISK
recovery area destination: C:\oraclexe\app\oracle\flash_recovery_area
database name (or database unique name) used for search: XE
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2009_
07_26\O1_MF_S_693234306_56RBLMM1_.BKP
channel ORA_DISK_1: control file restore from autobackup complete
output filename=C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
Finished restore at 26-JUL-09
RMAN> restore database;
RMAN-03002: failure of restore command at 07/26/2009 12:41:17
ORA-01119: error in creating database file 'C:\TEST.DBF'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already existsHi Bobo Dasilva,
What you showed according to your output is you created an autobackup without the info on the datafile called:
C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2009_07_26\O1_MF_S_693232337_56R8O2N0_.BKP
Than you created the tablespace which implictly created a new controlfile autobackup because you changed the structure of the database.
C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2009_07_26\O1_MF_S_693234306_56RBLMM1_.BKP
This last controlfile autobackup is than used by the restore process which is the reason the controlfile is aware of the extra added datafile.
Best would be to to force the restore of the controlfile from O1_MF_S_693232337_56R8O2N0_.BKP if you want the controlfile not to contain the info.
Regards,
Tycho -
Hi there!
Photoshop CS4 gives me a strange error. When trying to save a psd file as a jpg (using "save as"), it doesn't change the extension when selecting jpg from the format drop down menu. This results in a message, saying that the original file already exists, or when I save it to a different location, I get a psd file with jpg algoritm. Anyone any idea?
I'm using XP SP3. Other programs do not have this issue. For instance, when working in Adobe Acrobat, and trying to save a pdf in the rtf format, it correctly changes the file extension, and saves the file as rtf.
Thanks in advance!TurboPriest wrote:
The problem must either lie with Photoshop, or a combination of Photoshop on my XP configuration.
Most probably, since I don't get that problem. Maybe try installing the 11.0.1 update (if you haven't yet). If that doesn't work, then try to figure out the extent of the issue. Try PS in a different Windows user account (create a new one), and turn off the unnecessary stuff that runs in the background on your computer. If you're not familiar with msconfig, then see this document for turning of background stuff:
http://go.adobe.com/kb/ts_kb404984_en-us
Let us know if either of these change the situation, and hopefully we can help you out from there.
Also, have you installed any plug-ins for PS? Maybe one of these is interfering with Photoshop's jpeg plug-in somehow. Check out this document:
http://go.adobe.com/kb/ts_kb409112_en-us
HTH -
Function module in Infotyp which checks if identical data already exists
I want to create a new hr master data (tcode pa30) for Hans Müller in e.g Company X and fill out the necessary fields in Infotype 0001,0002 (Name, Birthdate, etc. ) u2013 done !
After creating the new hr master data for Hans Müller Iu2019d like to fill out a special Infotyp (0032) namely Internal Data.
PROBLEM:
While filling out the IT 0032 I do not know if the person - Iu2019ve created a new master data for - is already existing in the system ( but in other e.g Company Z) .
So what I need is a function modul in the Infotype 0032 which checks if there is already a person with the same data existing in any company (the whole data bank) using 3 characters from Infotype 0002 (Personal Data) namely , First name, Last name, Birthd. .
And if a person with the same first name ,last name and birthday is already existing the function module should link to that one or just show me a information.
Also tried to show you my problem on a graphic,
Function_Module_Infotyp0032.png
I hope you can help me. I would be very thankful for any hints , information or programming approach.
Regards
Seanthe problem with your solution approach is that there could be different pers. no. for the same person in my issue.
If I understood you well, that won't be a problem, since you already know which PERNR to use (The one you are using to update IT0032) In that case you only have to check if for that PERNR more than one record in PA0001 with different Company Code is present.
If your problem is that another person with the same name and same date of birth is active in the system with different Company Codes it would be similar.
For instance: Let's say that you find 2 different PERNRs for a given Name and Date of Birth in PA0002, then you can check IT0001 and look for the BUKRS value for those 2 Personel Numbers. If the values found are different you can raise the error message or whatever you need. -
Error creation of JCO connection: System Already Exist
Hi Experts,
We have created the SLD connection to the ECC6.0 from the Portal 7.0.
Created one JCO connection using that SLD successfully for the Clinet 100.
Now we required to create one more JCO Connection for client200 also. But it is giving the Error that
System Already Exist.
How can we resolve this. When we create the JCO connection for one client, con't we create one more JCO connection for the same system for the differt client or not?
If so How do it?
RegardsI think you can add one more client in the existing connection. well, I am not sure about that even.
nikhil -
How to check if nativemenu already exists?
In my simple example below, everytime you click on the link to reload the page, a new nativemenu is created along with the one that was already there... Click the HOME-INDEX link multiple times and you will see multiple copies of same menu pop up along the top.
How can I check to see if the menu already exists, so that it is NOT recreated everytime?
Using Air 1.5 on Win XP Pro.
Thanks
INDEX.HTML FILE;
<html>
<head>
<title>index.html example</title>
<script type="text/javascript" src="includes/AIRAliases.js"></script>
<script type="text/javascript" src="includes/AIRMenuBuilder.js"></script>
<script type="text/javascript">
var MainMenu = air.ui.Menu.createFromXML("source/MainMenu.xml");
air.ui.Menu.setAsMenu(MainMenu);
</script>
</head>
<body>
<h1>index.html example</h1>
<br>
<a href="index.html">HOME-INDEX</a>
</body>
</html>
SOURCE/MAINMENU.XML FILE:
<?xml version="1.0" encoding="utf-8" ?>
<root>
<menuitem label="File">
<menuitem label="Close" onSelect="doFileClose"/>
</menuitem>
<menuitem label="Help">
<menuitem label="About" onSelect="doHelpAbout"/>
</menuitem>
</root>I have not been able to figure out how to determine if the meny already exists or not, but I did come across using this:
var _MainMenu = air.ui.Menu.createFromXML("source/MainMenu.xml");
air.ui.Menu.setAsMenu(_MainMenu, true); //2nd paramter is Overwrite=true
instead of this:
var _MainMenu = air.ui.Menu.createFromXML("source/MainMenu.xml");
air.ui.Menu.setAsMenu(_MainMenu);//No second parameter specified, so assumes Overwrite=false
Adding the 2nd 'true' parameter still causes the menu to be created everytime, but it will OVERWRITE the previous menu, so there will only ever be one instance of the menu.
Depending on the size of the menu, it would probably be less cpu intensive to just use somekind of IF statement to determine if it already existed, but if that does not exist, then this is the only alternative I can find right now.
Thanks
Maybe you are looking for
-
I'm trying to create ringtones from songs I bought through i-tunes and it says the songs "can no longer be made into a ringtone" but some other songs I have purchased work. What's the deal?
-
What are X_ tables used for?
We are seeing an X_ table for each of our tables, i.e. for LAP030 we also see an X_LAP030, for ABH200 we also see an X_ABH200. They don't have any rows in them. The "describe" exactly like the base tables do. How are they created and what are they us
-
hey every-one, when i plug my ipod cable into my computer, nothing comes up on Itunes, so i can't put any music on my ipod, but my ipod still charges... LETS FIX THIS PROBLEM! Thanks.
-
This is the second time I updated my Adobe Acrobat X Pro program and the option to "Print to .pdf" disappears from my word processing program and all other programs I am running. Last time I uninstalled Acrobat and reinstalled and that fixed the pro
-
It loves me, it loves me not....
My clips seem to have a mind of their own. I imported a number of captured clips, all taken with the same camcorder. The first batch "accepts" the cross-dissolve transitions with no problem, the clips of the second batch (bin) have an adverse effect