SLD configuration to transport Third Party System ID Objects
Hi expert,
I have configured SLD group according to below link .
Transport Targets and Groups in the SLD
for PI and ECC system i have assigned transport target.
we have third party system also defined in SLD there name is same in PI dev ,PI quality and PI production.
how to proceed to set transport target for third party system if name is same ?
Thanks,
Dipak Patil
Hi Dipak
If your third party system has the same name in all other environments, you do not need to set transport target. Then there won't be automatic translation of the Business System name during import to the other environments.
Rgds
Eng Swee
Similar Messages
-
Configuration RFC in Third-Party System?!
Hi,
I try to connect a R/3 4.6c to the XI Server. I guess I configured the SLD right, but now i have to configure the RFC connection.
My idea in SM59:
Connectiontype: 3
target host: /H/1xx.xx.xx.xx/H/1xx.1xx.1xx.xx/H/
(external IP, Internal IP)
--> actually i am not sure how to configure this
User: XIAPPLUSER
Well, for the pro's i guess something seems to be wrong, and that's why the connection is not working.
Need some little help!Hi Carsten,
Take a look at this link for a complete walk through on RFC:-
http://help.sap.com/saphelp_nw04/helpdata/en/80/09680289c751429ab3b07ad2a61c10/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/09680289c751429ab3b07ad2a61c10/frameset.htm
Regards.
Praveen -
Third Party System In SLD??
Hi Friends...
i need to use third party systems in my scenarios..
for third party Business systems and Technical systems ..is this mandatory to provide Logical systems and host names in SLD.
regards
RamHi,
I hope no..But..
Unlike SAP products, third-party products are not necessarily included in the SLD component description. Therefore, you must first register the third-party product before you can register an installed system of this third-party product in the SLD.
See below link..
http://help.sap.com/saphelp_nw04/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm
Regards
Chilla.. -
Adding Third Party system in PI SLD
Hello Experts,
I new to PI and would like to know, how to add any Third part system in the SLD, and
scenario where sender is ABAP Proxy and receiver is Third party system, via SOAP Adapter.
Regards,
Abhishekhi,
How do i maintain the entries for all the component in SLD. -> generally we dont have authorizations to create Business system,products in sld.
if you have, then follow what was i posted earlier link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50924080-0627-2a10-2b89-8cb87b972fb1?QuickLink=index&overridelayout=true
any information on IDOC to SOAP Scenario.
In R3 :
1.Craete Logical system for R3 say SAPR3
2.assign client to this LS.
3.Create Logical system for XI say SAPXI
4.create RFC pointing to XI say R3_To_XI
5.Crate port of type Transactional RFC say PORT_To_XI.... give RFC created in step 4.
5.Create Partner Profile of type LS.
Give Partner no as SAPXI (LS of XI created in step 3)
In outbound parameters add ur Message type
Double click on message type & give Port PORT_TO_XI created in step 5.
6.Create Distribution Model..... Transaction BD64
In XI
SM59 - R3 connection pointing to R3
IDX1 - define the port with the above dest.
in ESR:
import Idoc and create everthing based on your requirement.
please refer below threads:
IDOC to SOAP scenario
IDOC to websevice (SOAP) scenario
thanks, -
Need info on configuring Third Party Systems on Soln Mgr
Hi All,
I have installed Solution Manager 4.0 on Windows 2003 Server and Oracle 10.2.0.2 and need to integrate Third Party Systems like E3, HighJump and Marketmax on it.
What we are basically looking for is configuring the Service Desk functionality so that tickets are generated from these systems.
Can any one provide me with any kind of help as to how to go about doing this ? I am almost done with configuring the Basic Settings in the IMG to implement the Service Desk. I say almost because it does ask me to create a System Landscape and I donot want the SAP Systems to be monitored.
Thanks,
KunalHi
Can u please send me the Steps for configuring the Basic settings in IMG to implement the service desk.(what r the step to be done)
Regards,
Neni -
How to configure https to send wsdl file to third party systems
Hi Experts,
instead of using http, i need to use https. so for this in xi system what steps do i need to follow to send wsdl file to any third party systems. here iam using pi 7.1 as a xi system.
please help me in this.
thanks
jas>> to send wsdl file to any third party
In no communication you send wsdl to third party. You always send related http message.
For HTTPS, in the receiver channel, use HTTP Destination.
Goto sm59 in PI and create RFC destination type G. There under "Logon & Security", set SSL as Active.
For this to work, certificates should be imported on ABAP stack using STRUST.
Regards,
Prateek -
File Adapter and Third party system
Hi,
I am new to XI and implementing a simple scenario.
In SLD- I have 3rd paty software component and product.
3rd party technical system: using my pc - For host name I am using my machine name.
Scenario: Using file adapter transform csv file to xml.
File resides on my machine. I have configured file adapter inbound and outbound. Integration Dir & Rep objects are all activated.
But nothing happens, cannot see any message in Messgae monitoring..
Any help would be great.. Is my technical system setup wrong?
thankschk whether the folder in your m/c where the CSV file resides is shared and has appropriate access. Also you need to specify your m/c IP with fwd slashes, e.g) //<Ipaddress>/foldername
configuring your m/c as a Third Party system in SLD is fine.
If you think ur SLD settings are not correct, you can define your file adapter commn. channel in a Business Service(which does not require an SLD entry) and check whether it works.
Thanks
Saravana -
Communicating with Third Party System
Dear All
I have a scenario where I want to send Idoc PEXR2002 to a bank.
SAP 4.6C --> PI -
> Bank
I have made all the configurations to send the idoc to PI and I am sending the Idoc to PI using partner type Bank SAPPI successfully but in PI I am getting the error that receiver agreement not found.
I have created the Bank as a Third Party System in SLD but I am not sure how to link this third party system in ID (Integration Directory) .
My questions are
How to link the third party system created in SLD with ID to send the IDOC using a HTTP Adapter i.e should I create the third party as a Business System or Business Service in ID.
Second Question is while sending the IDOC from 4.6C to PI what kind of partner type I will use LS or Bank.Hi Adnan,
Its complaining about the receiver agreement. So you need to make the receiver agreement. You can have a 3rd party business system for the bank and create teh receiver agreement between your sap business system and for this one. Add your bank receiver communication channel in this receiver agreement. Then it should work. Since you are using PEXR2002 idoc then you dont need to create sender communication channel and sender agreement.
In Sap while you create partner profile you can use bank as partner type.
Regards,
---Satish -
ECC Via XI to Third Party system through Idocs
Hello,
I have done all the setting required to IDOC communication,
RFC's are created,
Distribution Model
Imported the Meta data
Partner Profile
ESR Objects Made (IDoc as my Source and WSDL as External Definition for Target)
ID Configuration made, sender channel is SOAP.
SLD Configuration (Business and technical system as third party systems and ECC as ABAP system)
Sender is ECC, no sender channel will be required (correct me if i am wrong), where as
now when i test my scenario with WE19, i do not see my XML while using tcode sxi_monitor.
have i missed any step.
Any help will be appreciated,
Regards,
Abhishekin IDX5 System is not a Central Integration System: unable to start program is the error, if i fix this error what will be impacts on the system
please follw bwlow step:
Check SXMB_ADM --> Check the Integration Engine Configuration
In the Global Configuration Data :
Role of Business System should be Integration server
Corresponding IS should point to Pipeline URL.
please check below link
Configure Role of Business System " as Central Integration Server , PI
and
Transaction SAP Adapter u2013 Monitoring (IDX5) : provides you with an overview of all messages sent to or from the Integration Server as IDocs. Double-clicking a message provides you with detailed information on this message in the Integration Server.
You can monitor the status of all XML messages by using transaction Integration Engine u2013 Monitoring (SXMB_MONI).
You can use transaction SM58 to monitor native RFC communication on the Integration Server. This type of communication protocol is used in two places here:
To send an IDoc from an SAP system to the Integration Server
To send an IDoc from the Integration Server to an SAP system
and one more thing are you tested Rfc destination ? is it working ? -
How to regsiter a Third party system in NW2004s ?
Hi,
I am using NW2004s SR2 and i need to register a third party system in SLD. Do i need to define manully in SLD or there way to register them automatically like running data supplier with rz70 for ABAP systems.
help would be appreciated
Thanks,
sriniI actually did read in the SLD documentation that it is possible to do it automatically for third party systems as well.
Dont have that document with me now, but if you look into the SLD documentaton from your XI homepage you will find a section that does state that third party systems can also be registered automatically.
Never tried it though
Regards
Bhavesh -
Third party system (JCO) ---RFC--- PI ---RFC--- ECC
Hello all,
We are trying to implement the following scenario:
Third party system (JCO) -RFC-> PI -RFC-> SAP ECC
The third party system connect to PI via Java Connector API with a know user id in PI. After that third party system tries to obtain the RFC that is already implemented and remote enabled in SAP ECC environment. But at this step there is something wrong in third party system software because we are not able to obtain the RFC interface and metadata from PI repository.
1. This step is working correctly. Connection is OK.
JCO.Client mConnectionPI = JCO.createClient("100", // SAP client
"user_id", // userid
"********", // password
"pt", // language
"10.x.x.x", // application server host name
"01"); // system number
mConnectionPI.connect();
2. This step is not working correctly:
JCO.Repository repository = new JCO.Repository("TestRep", mConnectionPI);
IFunctionTemplate ftemplate = repository.getFunctionTemplate("Z_RFC_XXX"); - not found exception
We would like to know if there is something missing in any environment that we have to configure or implement in order to fix this issue. Thanks a lot.Hi Primini,
couple of stupid-but-necessary questions:
1) have you imported the RFC model in PI Repository?
You don't need to have the RFC metadata in PI ABAP stack (there is no point in doing that), but rather in the PI Repository/ESR, within the SWCV you've created.
Check the "Activities" session of this link for more details:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
2) if you have done 1), have you configured the RFC Sender scenario properly?
I mean, have you ran the configuration wizard to create the agreements & determinations, setting the RFC interface as both the sender and the receiver interface? Of course, the systems would be different: as the sender system, you'll have a Business Service representing the legacy/JCo system; as the receiver, you'll have the ERP Business System.
This should make your scenario work.
If it doesn't, try one more thing: in the JCo code, just for the metadata repository connection, use a connection to the ERP system. But for the actual call, use the PI system.
Let us know the results.
Best regards,
Henrique. -
How to receive receipt in third-party system?
I want to send message from third-party system via HTTP-adapter and
integration server to SAP MDM. I have created outbound interface for my
third-party system, message for this system, message mapping between my
messageand ABABusinessPartner, scenario for transporting business
partner data between message interface of third-party system and MDM
interface ABABusinessPartnerIn.
On third-party system side I have developed function which sends XML-
message via HTTP protocol to SAP XI integration server (to HTTP-
adapter). I want to receive delivery acknowledgement in synchronous
mode (in same HTTP session). I want have delivery result
(delivered/undelivered) in my third-party system.
Because ABABusinessPartnerIn is a asynchronous interface then I can't
use HTTP synchronous mode (parameter &qos=BE).
Whether I should use the sync/async gateway?
Message was edited by: Eugeny BalakhonovYou can see the stocks with mvement type 101-O for that material
-
Rollback work in third party system thru RFC
Hi Gurus,
Here is my scenario:
I am using RFC_UPDATE_TAXES_DOC to update records in third party system.
After successful updation only , I am calling BAPI_ACC_GL_POSTING_POST to post records into SAP.
Suppose I could post Taxes successfully into third party through RFC, but my BAPI gave me some error, I need to revert back the updation done in third party system as well.
Could you please suggest me an RFC which could do this or guide me with some pointers on how to achieve this.
Many Thanks,
MadanHi Primini,
couple of stupid-but-necessary questions:
1) have you imported the RFC model in PI Repository?
You don't need to have the RFC metadata in PI ABAP stack (there is no point in doing that), but rather in the PI Repository/ESR, within the SWCV you've created.
Check the "Activities" session of this link for more details:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
2) if you have done 1), have you configured the RFC Sender scenario properly?
I mean, have you ran the configuration wizard to create the agreements & determinations, setting the RFC interface as both the sender and the receiver interface? Of course, the systems would be different: as the sender system, you'll have a Business Service representing the legacy/JCo system; as the receiver, you'll have the ERP Business System.
This should make your scenario work.
If it doesn't, try one more thing: in the JCo code, just for the metadata repository connection, use a connection to the ERP system. But for the actual call, use the PI system.
Let us know the results.
Best regards,
Henrique. -
Avtivation of BC set from Third party system
Dear All,
We are using BC sets for configuration of regular business organizational units. We also have a workflow in third party system (like MS Share Point) for approval of such elements. Now we are looking to call BC sets for configuration of these elements Via third party system upon approval in workflow.
Kindly help me to understand the feasibility & possible approach to develop the system.
Thanks & Regards,
SandipHi,
Your question if i understood correctly.
You cannot transfer the BC Set from one system to another.
BC sets are used to have a snap shot for your customizing in SAP.
This are predefined by SAP, which as per mine knowledge you cannot transfer from an external tool to SAP ECC.
Kindly refer the below doc which may help you...
Business Configuration Sets (BC Sets) and their use - Basis Corner - SCN Wiki
Rgds, -
File adapter polling stops after reboot of third party system
Hi,
We noticed that whenever we reboot our third party system, XI File Adapter is losing it's connection to that third party system and polling stops. As a result File Adapter is not processing any files from that particular server.
To fix this problem, we either reboot XI Server or refresh communication channel (Go to change mode and save it).
File adapter is configured to use FTP to transfer the files between Windows Server and Unix Server.
Is there a better way to fix this problem?
Thanks in advance.
Regards
ChanduHi,
Make the connect mode as PER FILE TRANSFER in the file adapter.
<i>Connect Mode
Permanently
An existing connection to the FTP server is used permanently.
The connection is reestablished automatically if it is closed by the server.
Per File Transfer
A new connection to the FTP server is established for each file transfer.</i>
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
Bhavesh
Maybe you are looking for
-
Hi Friends, Pls guide me how to develop the vendor ageing report. In my query i have key figures 0creditamount , 0debitamount characteristics 0vendor,0companycode,no of days( current date - net due date ). In my report i have to shown ageing buckets
-
Error when deploy the Planning SampAp application view
When deploying, the job console shows: Started Time : 2008年3月4日 13:23:49 Submitted Time : 2008年3月4日 13:23:49 Last Updated Time : 2008年3月4日 13:23:52 User Name : admin Process Name : Thread : 0 Server : DimServer Detail : Initiating Product Action... I
-
Did I seriously just read that you won't be able to export h.264 from After Effects 2014? After Effects Help | New features summary- at the very bottom under miscellaneous features. You cannot export to the following formats in the 2014 version of A
-
I Cant inst i Tunes for i poc touch
-
I'm stucked on APPLE evolution bar when I restarted my Mac after upgrade to Yosemite. I Can't access on my computer.