SLD configuring Manually
Dear All,
During Installation i did not selected SLD installation, can you please tell me how can i do installation and configuration manually without re installation.
Regards,
Hi Nikunj,
It is possible to configure SLD after installation.
Please check following link:
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
Regards,
payal Patel
Similar Messages
-
SLD Configuration - Technical System and Business System
Hello,
I have installed SAP Solution Manager with local SLD and i want to use this system as Central SLD for my System Landscape. Later on i have installed other SAP Products like ECC,BI,PI etc.
Some of the systems i registered with previously defined SLD in Solution Manager, but some system i forgot to register with SLD during installation.
I am not sure or aware what is the difference between SLD configuration during installation and after installation.
If i have Register the System during installation will it register automatically with SLD or we have to do manually.
If i have not register system during installation and later on i want to register particular system with SLD what is procedure for that.
Can some one share knowledge on What is Technical Systems and Business System in SLD Configuration, i tried to do some activity for SLD Configuration but after seeing above both terms i was confused so for time being i stopped this activity.
Looking forward for kind response.
Best Regards,
V.SinghHello
try to go through these
http://help.sap.com/saphelp_nwesrce/helpdata/en/45/4208934d7f1193e10000000a1553f7/content.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/652b1f46-0a01-0010-25ae-e7cb07b55414 -
SLD configuration for DXI / PXI technical systems
Hello,
we have a problem when transporting XI configuration objects from XI dev to XI prod. The transport objects arrive in XI prod, but the name of the business system (for the SAP backend system) is not converted from dev business system (T01CLNT010) to prod business system (P01CLNT01) although the transport target for T01CLNT010 business system was set correctly (we are using business system groups Dev and Prod). And the "related integration server" for T01CLNT010 was also set correctly to DXICLNT010.
But then I noticed that the technical system for the DXI (XI Dev) is configured as follows:
TMS Domain ("DOMAIN_PXI") and TMS Transport Group Name GROUP_PXI ("GROUP_PXI") have the same values as PXI. Is that correct ?? We are using file transport, not CMS.
Another strange effect is that when I set the group in business system DXICLNT010 to Dev, that is also applied to business system PXICLNT010 ! Which is of course not what I want.
I assume I have to associate DXICLNT010 to Dev and PXICLNT010 to Prod, same as for T01CLNT010 / P01CLNT010. Correct ? Or does the group in the XI business systems not matter ?
Can anyone post an example of a working SLD configuration with two XI system dev and prod ? What values do I have to use in the XI technical and business systems, so that the transport will work ?
CSYThere's obviously something wrong in the SLD configuration for the exchange infrastructure systems. The error you're describing (one system pointing to another) usually occurs when one system is generated through homogeneous system copy of another system (was that your case?). I've seen that behaviour once and they corrected it by manually deleting the exchange infrastructure systems from SLD and creating them again from scratch.
Anyway, I highly recommend you to get an expert NW Basis consultant to realize a check in it before you proceed any further.
Aside of that, you're correct in your assumptions.
Your config in SLD should be like:
DEV_GROUP:
- DXI
- T01
PRD_GROUP:
- PXI
- P01
It's always 1 XI BS per group.
Also, if you use separate SLDs for XI Dev and XI Prd, you have to make sure that this configuration is reflected in both SLDs. So, if you make it one SLD instance, you must generate a delta export zip file from the SLD where you did the configuration and import this zip file in the other SLD instance.
If you use a central SLD, then it's not necessary.
Regards,
Henrique. -
Dears,
Recently we installed PI DEV and PI QAS server.At time of configuration we choose local SLD option for configuration.
But now we are getting requirement to configure central SLD.
So please confirm which strategy is good between them and if it is central SLD,Please suggest the
procedure to change local SLD configuration to central SLD.
ShivamHi Shivam
The SLD planning guide provided previously is the key source to plan, implement and run an SLD landscape
However what it may not deal with specifically is changing an existing SLD landscape to accomodate a local PI specific
SLD and a new Central SLD for Solution Manager (or other purposes)
Some things to consider when selecting Sync options
1) 1 Dual purpose SLD is not recommended - a central SLD might have different administration requirements than a PI specific SLD
2) Where possible do not change established import or export lines in either SLD
3) Keep all SLDs involved in the sync at the same J2EE version, SP landscape and CIM model/content
As the PI SLD can be productive critical - full consideration has to be given to this SLD as you can
still maintain systems manually in a central SLD manually - or indeed in Solution Manager itself (both manually and automatically via RFC) - therefore I would recommend a unidirectional sync from local PI SLD to Central SLD of PI landscape data only - either manually or automatically or indeed explore any available options to have data suppliers update both SLDs (there was some options similiar to this in older SLD versions - but I am not completely familiar with the latest SLD builds)
I would not however encourage full sync or CIM based sync as there maybe established CIM import lines on either SLD nor would I specifically encourage the Central SLD to influence data on the Local existing PI SLD
Best wishes
Stuart -
Can't store new target Array index out of range: 1 - SLD Configuration
Hello ,
Issue is regarding SLD configuration , We have ABAP + Java Addin on Suse Linux x86 ( 64 bit ) with Oracle 9.x .
Java instalaltion competed succesfully , J2EE is up and runnung while configuring SLD , Data Supplier Bridge - Configure the data supplier bridge - Update SLDs
As I set Update local SLD (sld/active) to true it gives error : Can't store new target Array index out of range: 1
( Error recorded in default.trace ,
#1.5#001635052D79005D000000010000393A00041904004A592B#1153404882278#com.sap.engine.library.monitor.mapping.ccms.Trace##com.sap.engine.library.monitor.mapping.ccms.Trace######87587b2017f911dbc661001635052d79#SAPEngine_System_Thread[impl:5]_82##0#0#Error##Plain###RegisterNode</Services/Web Services/Requests Number/sap.com/com.sap.engine.heartbeat/GRMGWSTest/CurrentClient>: com.sap.mona.api.JMonException: com.sap.mona.api.JMonAPIException: Internal error in tree structure#
#1.5#001635052D790049000000060000393A000419040226E9F1#1153404913510#com.sap.lcr.sagent.BuilderDirector#sap.com/com.sap.lcr#com.sap.lcr.sagent.BuilderDirector#J2EE_ADMIN#317####29009b1017fa11db96bd001635052d79#SAPEngine_Application_Thread[impl:3]_14##0#0#Error#1#/Applications/SLD#Plain###Can't access http store#
#1.5#001635052D790049000000070000393A000419040226EA90#1153404913511#com.sap.lcr.sagent.BuilderDirector#sap.com/com.sap.lcr#com.sap.lcr.sagent.BuilderDirector#J2EE_ADMIN#317####29009b1017fa11db96bd001635052d79#SAPEngine_Application_Thread[impl:3]_14##0#0#Error##Plain###Thrown:
com.sap.lcr.api.cimclient.LcrException: java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 1
I have already through updated Component Repository SAP Note : 669669 .
Regards ,
SantoshHi,
I am having exactly the same issue. Would you please advise what the solution was?
Thanks,
Murad. -
Sld configuration for rfc to soap scenario
Hi all,
The scenario which i am planning to do, describes how the Custom RFC client application in SAP R/3 System invokes a free Web service (that is hosted over the internet) using SAP XI. For our demo purpose, we have used a free web service available on the Internet.
In this scenario we will be using GetQuote method of Web service DelayedStockQuote. This method retrieves the Stock quote for the given Stock symbol. The method GetQuote has an input that takes in two parameters Stock Symbol and License Key and returns the following information.
StockSymbol,
LastTradeAmount,
LastTradeDateTime,
StockChange,
OpenAmount,
DayHigh,
DayLow,
StockVolume,
PrevCls,
ChangePercent,
FiftyTwoWeekRange,
EarnPerShare,
PE,
CompanyName.
Link to web service:
http://ws.cdyne.com/delayedstockquote/delayedstockquote.asmx?op=GetQuote
In this scenario, I planned to create two mappings, first between RFC Request to SOAP Request and second between SOAP Response to RFC Response .
Adapter in sender communication channel is RFC.(RFC Protocol)
Adapter in receiver communication channel is SOAP.(HTTP Protocol)
Result:
On testing this scenario, In the Sender R/3 system we have to Execute the Report program we have created earlier. When the program is executed with Stock symbol it should get the details of that stock symbol from the Web service.
My question here is what would be the sld configuration for webservice.whether it is a Java WAS or third party.If it is a third party or java WAS,what would be the system name and host name.
Any clarification from you all is welcome and will be highly appreciated.
With Regards
Karthik.Hi,
I would suggest you is to use third party. It is a web service, and does not matter the technology behind it (if it is java, abap, .net, cobol, no difference! it will be described by a wsld).
System name and host name doesn't matter too, you will not use this information in runtime, and you will specify host name and so at integration directory. You can make your standard on it, for example, put the name as DelayedStockQuote and host as http://ws.cdyne.com.
regards.
roberti -
Configure manual bank statement ff67
Hi!
I am configuring manual bank statement in ff67 for my Indian customer (I am from Sweden and has not worked with it before).
I have created three banks accounts:
One main account
One incoming account
One outgoing account
I have also created the house bank.
How do I configure transaction code named ZBSR for outgoing payment with assignment reference and ZBSD for incoming payment.
Thank you very much in advance!
BR ÅsaHi.
The customizing is difference according to your business requirement.
For example you have a customer invoice document:
01 customer 100 USD / 50 revenue 100 USD.
Then you want to clearing Customer invoice direct with bank account in FF67
then you have to define in your posting rule , posting area:2, as below:
Posting Key 40 Posting Key
Sp.G/L Indicator Sp.G/L Indicator
Acct symbol Bank account Acct symbol
Document Type DZ
Posting Type 8
Posting on acct key
Reversal Reason
if you want to use a Interim bank account to clearing the inovice, then you should define
then you have to define in your posting rule as below:
Posting area 1
Posting Key 40 Posting Key 50
Sp.G/L Indicator Sp.G/L Indicator
Acct symbol BANK Acct symbol bank clearing account
Posting Key 40 Posting Key
Sp.G/L Indicator Sp.G/L Indicator
Acct symbol bank clearing account Acct symbol
Document Type DZ
Posting Type 8
Posting on acct key
Reversal Reason
So it is necessary to do the customzing based on your business reqirements.
and in your case->you want the account 198001 to be credited in ff67 and account 198000 to be debited
Can you confirm whether the bank account defined in FI12 in your hourse bank/bank key is 198000, if yes, then you could define account symbol as below
Acct symbol: Bank with **********
Acct symbol:bank clearing account with *********1
then the following document will be posted after run FF67
40 198000 100 USD/ 50 198001 100 USD
40 198001 100 USD/ 15 customer 100 USD
The vendor is the same senario.
Hope above information are useful to you!
Addition, you can use T-cd:OFTD, menu->business volumn->manually bank statement to find all customizng you should define.
With Best Regards,
Gladys Xing -
Hi,
While configuring SLD, when we tried to trigger in Visual Administrator we got following error.
SLD Data trigger error
<b>Operation failed! Failed to collect SLD data. Failed to send HTTP data:500:Internal Server error. Please check if the target SLD system is available and SLD bridge is started there.</b>
Data bridge is working.
Can any body help in this case?
Also,
Following are the list of System Properties
Please let me know which properties should be entered with respect to SLD.
Admin Password (DQE)
Admin User ID (DQE)
Application Host
CATALOG ADMIN Logoff Path
Catalog Administration Description
Catalog Administration Host Name
Catalog Administration Path
Catalog Administration Protocol
Catalog Administration Relative Path
Changed By
CodeLink
Collection
Created At
Created By
CVIEWS Description
CVIEWS Host Name
CVIEWS Logoff Path
CVIEWS Path
CVIEWS Protocol
CVIEWS Relative Path
Description
Domain
DRS Description
DRS Host Name
DRS Protocol
Enable Session ID Sharing
Enable URL Rewriting
FSCM Description
FSCM Host Name
FSCM Logoff Path
FSCM Path
FSCM Protocol
FSCM Relative Path
Gateway Host
Gateway Service
Host Name of Crystal Enterprise Server
ICSS Description
ICSS Host Name
ICSS Logoff Path
ICSS Path
ICSS Protocol
ICSS Relative Path
ISA B2B Description
ISA B2B Host Name
ISA B2B Logoff Path
ISA B2B Path
ISA B2B Protocol
ISA B2B Relative Path
ISA B2R Description
ISA B2R Host Name
ISA B2R Path
ISA B2R Protocol
ISA B2R Relative Path
ISA ENT Description
ISA ENT Host Name
ISA ENT Logoff Path
ISA ENT Path
ISA ENT Protocol
ISA ENT Relative Path
ISA ETR Description
ISA ETR Host Name
ISA ETR Logoff Path
ISA ETR Protocol
ISA ETR Relative Path
ISA ETR Relative Path
ISA HOM Description
ISA HOM Host Name
ISA HOM Logoff Path
ISA HOM Path
ISA HOM Protocol
ISA HOM Relative Path
ISA_B2R Logoff Path
ITS Description
ITS Host Name
ITS Path
ITS Protocol
Last Date Changed
Logical System Name
Logon Method
Master Language
Object is a Template
Object Type
Path of Crystal Enterprise Server
PCD Location
Protocol of Crystal Enterprise Server
Remote Host Type
SAP Client
SAP System ID (SID)
SAP System Number
Server Port
Session Cookie Name
Session URL Name
Shared Catalog Description
Shared Catalog Host Name
SHARED CATALOG Logoff Path
Shared Catalog Path
Shared Catalog Protocol
Shared Catalog Relative Path
SHOP ADMIN Logoff Path
Shop Administration Description
Shop Administration Host Name
Shop Administration Path
Shop Administration Protocol
Shop Administration Relative Path
SNC Library Path
SNC Mode
SNC Name
SNC Partner Name
SNC QOP (Security Level)
System Category
System Name
System Type
Trace Mode
USER ADMIN Logoff Path
User Administration Description
User Administration Host Name
User Administration Path
User Administration Protocol
User Administration Relative Path
User Mapping Fields
User Mapping Type
Validate Connection
Web AS Description
Web AS Host Name
Web AS Path
Web AS Protocol
WFM CS Description
WFM CS Host Name
WFM CS Path
WFM CS Protocol
WFM Description
WFM Host Name
WFM Path
WFM Protocol
Regards,
Vaibhavhi,
check out this blog on SLD configuration, and check the proper steps you take
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
plus check out this thread
/thread/172900 [original link is broken]
hope it helps
regards -
File-RFC-File SLD configuration
Hello everybody!
Currently I'm trying to create a File-RFC-File scenario. So that request from file is send to RFC and after that the RFC response is written to file. I'm following some guides on this topic here on sdn. So I'm almost done with ESB and IB designs but got stuck with SLD configuration. It's pretty confusing to me what software components, business and technical systems should i create for the purpose of my scenario. Could you please explain it step-by-step?
Thanks in advance,
Peter>>>>>>>>confusing to me what software components, business and technical systems should i create for the purpose of my scenario
You dont need any software component or product is required, since already you are done with those objects.
May be you have used existed sofware component version for creating ESR objects. Okay.
1. You need one business system for R/3 or ECC
2. Juss get into SLD and create Technical System and Business System (If not yet available for R/3 or ECC)
3. As you have completed ur ESR, you can get into Configuration part
4. Choose - Communication component with out party
5. right click and assign business system (if R/3 or ECC is not yet assigned)
6. For File - you can go business service
That's it.
Regards
Pothana -
SLD Configuration error: Dispatcher running but no server connected!
Hi Gurus,
In t-code solman_setup under SLD configuration, the error dispatcher running but no server connected is prompted in the web browser.
Also, I've noticed that in SAP MMC the server0 in AS Java Process table has a return code error of -11113.JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -XX:MaxNewSize=341M
-> arg[ 4]: -XX:NewSize=341M
-> arg[ 5]: -XX:MaxPermSize=512M
-> arg[ 6]: -XX:PermSize=512M
-> arg[ 7]: -XX:SurvivorRatio=2
-> arg[ 8]: -XX:TargetSurvivorRatio=90
-> arg[ 9]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 10]: -XX:+HandlePromotionFailure
-> arg[ 11]: -XX:+UseParNewGC
-> arg[ 12]: -XX:+DisableExplicitGC
-> arg[ 13]: -XX:+UseTLAB
-> arg[ 14]: -XX:+PrintGCTimeStamps
-> arg[ 15]: -XX:+PrintGCDetails
-> arg[ 16]: -verbose:gc
-> arg[ 17]: -Dsun.io.useCanonCaches=false
-> arg[ 18]: -Djava.awt.headless=true
-> arg[ 19]: -Djco.jarm=1
-> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 22]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 23]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 24]: -Djava.security.policy=./java.policy
-> arg[ 25]: -Dsys.global.dir=G:\usr\sap\SMP\SYS\global
-> arg[ 26]: -Dapplication.home=G:\usr\sap\SMP\DVEBMGS00\exe
-> arg[ 27]: -Djava.class.path=G:\usr\sap\SMP\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SMP\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 28]: -Djava.library.path=C:\j2sdk1.4.2_17-x64\jre\bin\server;C:\j2sdk1.4.2_17-x64\jre\bin;C:\j2sdk1.4.2_17-x64\bin;G:\usr\sap\SMP\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;G:\usr\sap\SMP\SYS\exe\uc\NTAMD64
-> arg[ 29]: -Dmemory.manager=2048M
-> arg[ 30]: -Xmx2048M
-> arg[ 31]: -Xms2048M
-> arg[ 32]: -Xss2M
-> arg[ 33]: -DLoadBalanceRestricted=no
-> arg[ 34]: -Djstartup.mode=JCONTROL
-> arg[ 35]: -Djstartup.ownProcessId=2184
-> arg[ 36]: -Djstartup.ownHardwareId=E1203704103
-> arg[ 37]: -Djstartup.whoami=server
-> arg[ 38]: -Djstartup.debuggable=no
-> arg[ 39]: -Xss2m
-> arg[ 40]: -DSAPINFO=SMP_00_server
-> arg[ 41]: -DSAPSTART=1
-> arg[ 42]: -DCONNECT_PORT=64999
-> arg[ 43]: -DSAPSYSTEM=00
-> arg[ 44]: -DSAPSYSTEMNAME=SMP
-> arg[ 45]: -DSAPMYNAME=solmanprd_SMP_00
-> arg[ 46]: -DSAPPROFILE=G:\usr\sap\SMP\SYS\profile\SMP_DVEBMGS00_solmanprd
-> arg[ 47]: -DFRFC_FALLBACK=ON
-> arg[ 48]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 49]: -DSAPSTARTUP=1
-> arg[ 50]: -DSAPSYSTEM=00
-> arg[ 51]: -DSAPSYSTEMNAME=SMP
-> arg[ 52]: -DSAPMYNAME=solmanprd_SMP_00
-> arg[ 53]: -DSAPDBHOST=SOLMANPRD
-> arg[ 54]: -Dj2ee.dbhost=SOLMANPRD
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
[Thr 3032] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 3384] Tue Nov 30 16:51:03 2010
[Thr 3384] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 3384] Tue Nov 30 16:51:04 2010
[Thr 3384] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 3384] Tue Nov 30 16:51:05 2010
[Thr 3384] JLaunchISetClusterId: set cluster id 1030850
[Thr 3384] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 3384] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Tue Nov 30 16:51:12 2010
10.572: [GC 10.572: [DefNew: 174592K->11860K(261888K), 0.0496237 secs] 174592K->11860K(2009856K), 0.0496873 secs]
Tue Nov 30 16:51:16 2010
14.788: [GC 14.788: [DefNew: 186452K->15631K(261888K), 0.0420753 secs] 186452K->15631K(2009856K), 0.0421219 secs]
Tue Nov 30 16:51:20 2010
18.420: [GC 18.420: [DefNew: 190223K->19899K(261888K), 0.0434161 secs] 190223K->19899K(2009856K), 0.0434632 secs]
Tue Nov 30 16:51:27 2010
25.759: [GC 25.819: [DefNew: 194491K->28552K(261888K), 0.0664462 secs] 194491K->28552K(2009856K), 0.0665127 secs]
[Thr 2512] Tue Nov 30 16:51:28 2010
[Thr 2512] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 2512] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 2512] JLaunchCloseProgram: good bye (exitcode = -11113) -
Urgent pls ---- How to install SAP XI and check SLD configuration
Hello,
Pls send me links/pdfs/how to guide links --- to install SAP XI and check SLD configuration.
RegardsHi,
A copy:
Links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
Follow these steps while installing XI:
1. Windows server or advanced server with latest service patch.
2. IE 6.0 with latest service patch
3. Install Microsoft office and winzip, acrobat
4. Install JDK with version 1.4.2_03 or above with the corresponding JVM
5. Install the SAP GUI 6.20
6. Make sure that you have hard disk space of 10 GB in C drive and 50 GB in the installation drive.
7. Make sure the virtual memory is between 512 and 1594 or above for the installation drive.
8. Copy the dumps of following DVDs into the installation drive.
Installation Master DVD
Installation Export
Additonal Components for SAP BW/SAP XI,SAP MI,SAP KW
SAP Web As Java
9. Start the installation from the DVD dump Installation Master DVD.
10. When installing the ABAP Database the SID of the oracle default database should be different the ABAP database SID.
U can go through the Installtion Guides for Installing XI from http://service.sap.com/instguides (SR1 installation)
u can also refer to service.sap.com/platforms to see the available platform on which XI can be installed. ( Windows/linux/UNIX)
or you can even go through this weblog which clearly talks to you about XI installation
XI installation: https://websmp202.sap-ag.de/~sapidb/011000358700009389172004E.PDF
In addition to this installation guide you also need to download the XI configuration guide which is very useful for technical configurations of various adapters and XI system.
At the same place you will also get the XI configuration guide e.g XI30ConfigGuideSPS11.pdf.
U can also download SAP Exchange Infrastructure 3.0 SR1 Installtion Guide from the articles scetion.
ABOUT XI :
If its just that you wanted to know more about sap xi....then the information below should definitely help you.
The best way to learn XI would be to make the maximum use of XI from its forums, weblogs, presentations, etc in SDN.
First I thought I will just give u the basic steps involved in doing any scenario in XI. This is very essential for a beginner.
First of all you would need to define your product, software component, business system and configure the technical landscape in the sld.
You then go on to create the objects in the repository, you import your software component here and then begin your design steps. To import your RFCs n Idocs if you require any before proceeding.
Then under the name space which you want, you go on to define your data types, message types and message interfaces.
Then you do your message mappings where you specify your source and target message types and the relation between them, then you do your interface mapping. If you are using a BPM, you do the integration process.
Once you have this done, you will have to move to the directory, here is where you define how you use the objects and how you configure them to work as a scenario.
You assign your business system to the configuration scenario which you have created, and create the communication channels. Then you go on to configure the receiver determination, interface determination, and the sender and receiver agreements. Once youre done you will have make sure you activate your objects. The exact parameters steps depend on what kind of scenario you are implementing.
You can use sxmb moni or the runtime workbench to monitor the entire scenario which you have done.
Also I would suggest this link on SAP help for any info that you want on XI,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
<b>
Cheers,
*RAJ*</b> -
Cisco Aironet Configuration Manual
I am new to Cisco Wireless Configuration. Anyone know please is there any website I can surf for Cisco Wireless Configuration Manual. Thanks to anyone who drops me a response.
Try this:
http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350cards/windows/legacy/scg/
Shawn -
Hi.
we are trying to do SLD configuration.In that we need to change the value of gw/max_conn_per_wp parameter to a higher value.
Default value of this profile parameter is 10 in our server.
When we tried to change this value to 200,it shows that" **This change is not permanent and will be lost when the server is restarted"**
How can this value be modified to 200 permanently?hi,
I think the parameter has to be set at OS level.
Refer the SAP Note 972262
Regards
Ramesh P -
J2EE SLD Configuration (NW04s ABAP+J2EE)
Hi,
I have just installed NW04s BI System with ABAP + J2EE (SP13).
We have a SLD running on SolMan 4.0 (SP13) which is a different host.
I have configured the ABAP part of the SLD for NW04s BI System and it is working fine.
I have no idea how to configure the J2EE side of it.
The only thing I have defined is a Business and Technical system for J2EE in our SolMan SLD for our BI.
I do not know how to proceed for J2EE of our BI system. I have found few links but kind of confused.
Can anyone please give me exact steps I need to configure. I do not need detail but just a sequence of steps.
I will appreciate your help.
Regards.
SSinghThank you for the reply. It helped.
My goal is to creat the BI system as a Application System in SXMB_ADM. I have done the ABAP part including the destinations SAPSLDAPI, LCRSAPRFC and SLD configuration. They are working fine as I said in my message.
Now from the J2EE side, the only thing which is required is what you said.
Is that enough to make make the J2EE also a Application System or more needs to be done once J2EE is SLD ready. I know that J2EE should also be craeted as a Business and Technical in SLD. That part is done.
Please respond.
Regards.
SSingh -
Reg:PP Configuration Manual
Dear Guru,
I am going to implement the pp module first time so kindly send me the pp configuration manual (Both Discrete and process manual) to me.
Regards
Amar PuhanHi,
These are the basic configuration settings you need to maintain. Apart from this, as per user's requirement you may need do configure more.
Factory Calendar
Configuring SAP calendar
Define Public Holidays
Define Hoiliday Calendar
Creation of Factory Calendar
Basic Data
Bill of Material
Define Modification Parameters
Define BOM Usages
Define Material Types For BOM Header
Define Item Categories used for Item Data
Define allowed Material Types for BOM Items
Define Order of priority for alternative BOM usages
Work center
Define WorkCenter Category
Define Field Selection for Work Center
Define Task List Usage for Workcenters
Define Parameters for Standard Value Key
Define Standard Value Key
Define Person Responsible for work Centers
Define Move time Matrix
Define Default Work Center
Default Control Keys
Define Capacity Categories
Define Capacity Planners
Define Shift Sequence
Define Worcenter Formulas
Define Work Center Formulas for Costing
Routing
Define Number Ranges for Routings
Define Field Selection
Define Material Type Assignments
Select Automatically (Routing Selection)
Define Task List Usage
Configure Planner Group
Configure Control Keys
Define Reduction Strategy
Define Relevancy to Costing
Define (Standard) Trigger Point Usage
Define Automatic Selection of Routings
Production Planning
Demand Management
Define number ranges for planned independent requirements
Configuring Requirement Types and Requiremtent Classes
Define Strategy
Define Strategy Group
Define version numbers
Maintain consumption mode and period of adjustment
CRP Define layout keys
Define layout
Define profile for capacity planning table
Define Overall profile
Material Requirement Planning Plant Parameters
Carry Out Overall Maintenance of Plant Parameters
Scheduling Parameters for Purchasing
Number Range for Planned orders
Number Range for Puchase Requisitions
Define MRP Controllers
Define Missing Parts MRP Controller
Define Special Procurement Type
Maintain Planning Calendar
Define MRP Areas
Define Scope of Planning for Total Planning
Define Planning Horizon
Activate BOM Expllosion characteristics
Define Planning Time Fence and Roll Forward Period
Define Floats (Scheduling Margin Key)
Define Parallel processing for MRP
Define Receipt days Supply
Parameters for Determining the Basic Dates
Define scheduling parameters for planned orders
Define availability stock in Transfer/Blocked stock/Restricted stock
Define External Procurement
Define BOM Explosion Control
Define BOM Explosion for Sales Orders
Define BOM and Routing Selection
Activate MRP and Set Up Planning File
Define Planning File Entries for Goods Movements
Convert Planning File Entries for MRP Areas
Shop Floor Control Master Data
Define Order Types
Define order type-dependent parameters
Production Status Profile
Define number ranges for orders
Define number ranges for confirmations
Define number ranges for reservations
Define production scheduler
Define production scheduling profile
Define Confirmation Parameters
Define Time for Confirmation Processes
Define Reasons for Variances
Define single screen entry
Define Field Selection for Confirmation
Define Reduction Strategies
Define Print Control
Batch Status Mangement
Batch Search Strategy to Production
Activate Batch Management
Availability Check
Define Checking Group
Define Checking Rule
Define Scope of Check
Define Checking Control
Checking Rule for Back order Processing
Scheduling
Specify Scheduling Type
Define Scheduling Parameters for Planned Orders
Define Scheduling Parameters for Production Orders
Regards / US
Maybe you are looking for
-
Can someone please help me install CS6 on my computer. I have downloaded both files. I have my serial number
-
XI Attachment and main document MIME sequence
Hi All, We are doing SRMXIARIBA PurchaseOrder Integration, everything works fine. Now we want to add a new feature to support attachments. So from SRM XI will be receiving MainXML and Attachment(s)(this can be any type like word, pdf, jpg etc). We ar
-
Need step by step to get port 48705 open for Panasonic Bluray
Classic handoff syndrome. Brand new Panasonic Bluray connected to internet out of the box with Airport Extreme, streamed fast. Imac running Snow Leopard. Updated Panasonic firmware and no connections. Panasonic tech tried for a half hour and concl
-
Canon powershot s5 image acquisition
Hi. Am I able to control/acquire images from a Canon Powershot S5 IS digital camera in LV 8.6? I have managed to get this working with a simple USB webcam, using the NI-IMAQ for USB, but I can't find the Canon camera in IMAQ (it works with its own so
-
PL/SQL with DBMS_HS_PASSTHROUGH Package
Hi, Can someone provide me a sample code on using DBMS_HS_PASSTHROUGH package? I have Oracle 10g installed on Windows XP Home and needs to extract some data from HP-UX(running Informix 8.32). Any help is highly appreciated. Thanks