SLD Data Transfer Error

Hi,
In visual administrator, when trying to trigger SLD Data Transfer. It is giving the follwing error.
Operation Failed. Failed to collect SLD Data.
Software caused Connection abort.socket write error.
Any idea how to resolve this.
Thanks,
Eureka.

hi all i am getting the following error in rz70 when trying to test the connection with out scheduling the background program
              execute program    sldrfc
                                         sldmsgsrv
                                         sldinstsp.....
                                         used rfc destination sld_uc
                                         error when opening rfc connection
i have checked the rfc destination sld_uc and also tried to test the connection it shows an error in connecting host and says "is ur gateway open" our gate way is working properly, does the port 33xx should be openend for telnet or its ok even telnet on the port works or not?

Similar Messages

HI Masters, in go.bat file sld data transfer tirigering showing error

HI Masters,
In visula j2ee admin tool when i am giving correct host name, portno, user id - j2ee_admin and correct password ( in http setting tab and also cim client generation settings tab , cim clinet test failed and also triggering sld data transfer also failed.
in browser http://hostname:portano/sld, it hiome home page, but all technical systems and all options with adminstration tab also showing in active mode ( not enable).
what is the problem . i can not understand . what should be the problems and what are the ways to solve the problem.
Please give reply in detail

Sujana,
Check this document and follow the steps and you would be good to go.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/652b1f46-0a01-0010-25ae-e7cb07b55414&overridelayout=true
Cheers!
Sandeep Tudumu

TWAIN data transfer error

NEW! When I try to scan (CANON 8400F scanner) into my desktop (WindowsXP) I now get an error message (code 2,178,0) followed by the message "TWAIN data transfer error". Can this be fixed? sunnycroft

Hello sunnycroft.
Uninstalling and reinstalling the drivers may resolve this issue. Please perform the following:
1. Click Start and open the Control Panel.
2. Open the Add or Remove Programs option.
3. Uninstall the CanoScan 8400F and the Canon CanoScan Toolbox.
4. Close all windows that are open.
Once this has been done, ensure that the scanner has been disconnected. Then reinstall the unit be downloading the Drivers and CanoScan Toolbox from our website at the following link.
http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_8400f#DriversAndSof...
If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

SLD Data supplier Error

Hai Experts
Yesterday I got one error message from JDI configuration time. The Error was "Sld (http://otisap03:50200) server exception. User credential are invalid and user is denied access." Then now i open Visual administrator>services->SLD data supplier. I click the SLD DATA Supplier. Error in SLD DATA Supplier in
"Operation failed failed to collect data. Software caused connection abort:socket write error"
Can u help me!
Malar.

Hi Malar,
Apart from the link suggested by Barry please visit this link as well:
http://help.sap.com/saphelp_nw04/helpdata/en/c9/dc37520bdf4b48bb8f6d4329f073d5/frameset.htm
Further just check if te user id credentials you are inputting in SLD data supplier bridge configuration are valid. Check if the user id is not locked. Further check if the password is valid and finally if he has all SLD relevant authorizations.
If I rememeber you had posted a thread for a similar issue recently.
Please award points for useful info.
Regards.
Ruchit.
Message was edited by: Ruchit Khushu

Data TRansfer error

Hello Friends,
I am migration data from one SAP system to a different SAP system.
I have done this for Materials and everything went fine.
HOwever when I am trying to do the same for Inforecord I am having some issues.
I am using message Type INFREC
Basic Type INFRECMASS01
process code INFR.
I am using the program RBDSEINF to transfer Info Records.
Every is fine in the sending system, but the receiving system has an error when I look into the IDOC.
the error is - Function module not allowed: IDOC_INPUT_INFREC
I looked into the INbound partner parameters.
When I click on the Process code INFR, it directs me to the function module thats in the error.
Any Suggestions.
Raju.

Thanks Ramesh,
Any more suggestions.
Raju

Data transfer error open dataset files

hi,
When i try to create a excel or text in my application server using open dataset.
i.e
l_filename type rlgrap-filename value '/tmp/down.txt'.
I got a short dump during the run time
i got the output and put into an internal table.
the following code has been used.
form user_command using r_ucomm like sy-ucomm
rs_selfield type slis_selfield.
if r_ucomm = 'confirm' .
OPEN DATASET l_fname FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT it_out INTO wa_out.
IF sy-subrc = 0.
TRANSFER wa_out TO l_filename.
ENDIF.
ENDLOOP.
endform.
during the execution i hv a button alv grid outpu. when i click the button the file should be transferred.
but NO authorization to open the file "/tmp/down.txt".
and the error is pointed in the opendataset line.
Please tell me where i am wrong . and help me in resoving this.

Try this..instead of moving field by field into the file 1st convert all he fields to a character stream..and then move that steam to file. Ex:
loop at internal table into l_h_tbl_file.
concatenate l_h_tbl_file-f1 l_h_tbl_file-f2 l_h_tbl_file-f3
l_h_tbl_file-f4 l_h_tbl_file-f5 into g_string.
TRANSFER g_string TO fu_wk_get_file.
endloop.

Data transfer error(application server)

Hi Gurus,
While uploading data into application server, I have an issue. I am having the data in internal table but I am unable to send all the data into application server.
(open dataset file for output )
TRANSFER l_h_tbl_file TO fu_wk_get_file.
Data in internal table:
f1 f2 f3 f4 f5
1 2 - 4 5
after update to application server:
f1 f2 f3 f4 f5
1 2 - - -
I am getting 2 fields only. if any blank filed(f3) exist between those fields remaining fields also getting blank.
How can proceed further?
Regards,
Dhanu

Try this..instead of moving field by field into the file 1st convert all he fields to a character stream..and then move that steam to file. Ex:
loop at internal table into l_h_tbl_file.
concatenate l_h_tbl_file-f1 l_h_tbl_file-f2 l_h_tbl_file-f3
l_h_tbl_file-f4 l_h_tbl_file-f5 into g_string.
TRANSFER g_string TO fu_wk_get_file.
endloop.

Data transfer error when checking the Return vendor flag (LFM1-KZRET)

I am working on a conversion program to update Vendor Master with return vendor flag (LFM1-KZRET). When ever i do it manually it works fine. But, if i try it through recording or BDC program i get an error saying '
It is not possible to copy data from field 'Returns with shipping proc.'. Please can any one let me know if there is any other method to update this data or any OSS notes to be implemented to solve this error.
The problem is only occurring when we try to update the field while doing recording or BDC.

Hi Rob,
I have already checked the note 964533 and i feel that its the solution to my issue. But our system is on release 500 and this note only supports release 600. We were not allowed to implement it on release 500. I have sent a customer message to SAP for asking the possibilies of implementing this note on release 500 and regarding any side-effects and waiting for there response. Thanks for your help and just want to know whether you have ever faced this issue.
Satish.

KEFC: External data transfer : Error

Hi
I get the folling error while executing the report.
Transaction KEFC.
"The transfer was terminated. However, content errors occurred Message no. GD074"
It ran fine without problems. What could have changed?

Hi,
Have you checked out this note?
Note 390533 - EDT: Error after implementing Support Package
Cheers,
Gimmo

Material master data transfer error

Hi experts,
I am getting errors in transfering some materials from R/3 to GTS.
The errors are:
Of 1 selected material(s), 0 were processed successfully. Message no. /SAPSLL/PLUGINR3112
===
The error log mentions that:
Internal error in program object /SAPSLL/NUMBER_GET_NEXT (RC = 1) - processing terminated
Message no. /SAPSLL/CORE_PRODUCT205
Diagnosis
Processing of the current product was suspended due to a processing error. The error occurred in program object /SAPSLL/NUMBER_GET_NEXT with return code 1.
==
Internal error in program object /SAPSLL/API_6850_SYNCH (RC = 2) - processing terminated
Message no. /SAPSLL/CORE_PRODUCT205
Diagnosis
Processing of the current product was suspended due to a processing error. The error occurred in program object /SAPSLL/API_6850_SYNCH with return code 2.
=====
The number ranges are maintained in GTS.It is also maintained in R/3.
Is this a patch issue?

Thanks Vasantha.
We are using the ECC 6.0 and GTS 7.1.
The present patch levels are
PI_BASIS          2005_1_700       0013     SAPKIPYJ7D    PI_BASIS 2005_1_700
ST-PI    2008_1_700       0000          -      SAP Solution Tools Plug-In
SLL-LEG           710       0012     SAPK-71012INSAPSLL SLL-LEG 710 : Add-On Installation
ST-A/PI 01L_ECC600     0000          -      Application Servicetools for ECC 600
As per sap note 858706, the PI 2004.1 Support Package 13 will be required.
Our Basis guys are unable to confirm the PI patch level at this time.
Do you think,we need this patch?

ITunes data transfer from old HD is missing songs

I replaced the HD on my iMac. The old HD was OK but I didn't want to take chances. I used super duper to transfer the old data to the new HD prior to replacing it. After replacing the HD I loaded SL and then transferred the data and apps over from the old HD using migration assistant. Now I get random error messages everytime I open iTunes. They say ' "Song Name" is not authorized on this computer'. If I go to authorize the computer it tells me that this computer is already authorized for this Apple ID. Now several of my purchased songs are not showing up ["Song Name" Can not be found] and it seems to find more songs to have a problem with every time I open iTunes. Is this a data transfer error? Old iTunes ID error? Thanks!

Sounds like the data simply did not transfer.
If you still have access to the old hard drive, copy the ENTIRE iTunes folder from the old drive to the new drive.

SLD Bridge : Automatic data transfer

Hi ,
We have configured SLD bridge between system A ( PI 7.0 ) and B ( Solution Manager 7.0 ).
A------SLD bridge -
>B
Now How can we check data tranfer is successful or not. And how much time does it take for data transfer.
We have already checked log in Sld-.administration-->log. But so far there is no infomration about data transfer.No error either.
Best Regards,
Tushar

Hi Tushar
Please check in the SAP Data Supplier in the Visual Administrator and update the details and test it
Hope it helps
Regards
Arun

Error while executing Initialize with Data Transfer for 0FI_GL_10

Hello All,
Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
The issue now is we are getting the following error message while running INIT with data transfer.
Job terminated in source system --> Request set to red
Message no. RSM078
We have copied the data till July 1st week of 2011.
Please advice. The issue is very critical.
Thanks & Regards
Sneha

Hi Arvind
Thanks for your inputs.
Please find below the details of the short dump.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          09/07/2011 11:25:32
Short text
     SQL error in the database when accessing a table.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
How to correct the error
     Database error text........: "ORA-01652: unable to extend temp segment by 128
      in tablespace PSAPTEMP"
     Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
     Please check the entries in the system log (Transaction SM21).
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
Information on where terminated
    Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
     "FETCH_TO_ISTRUCTURE".
    The main program was "SBIE0001 ".
    In the source code you have the termination point in line 903
    of the (Include) program "GP_GLX_FAGLFLEXT".
    The program "GP_GLX_FAGLFLEXT" was started as a background job.
    Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
    Job Initiator.. "BIWREMOTE"
    Job Number..... 11203300
    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
    procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
    840 of the (Include program "GP_GLX_FAGLFLEXT ".

Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller

Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
From the vi used in the attachment,i encountered some problems at:
(1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
(2) How to synchronies the read & write btw contorller?
All controller are communicating with each other directly without the need of a host computer to link them together
Is there any other method to do fast data transfer betwe
en controller?

Hi YongNei,
You were succesful in omiting enough information to make it very difficult to answer!
Please post your example.
Please tell us what version of LV-RT you are using.
Please define what you concider "fast data transfer".
Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
WHat exactly has to be syncronized?
If you have something that is close to working, share that.
Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
Trying to help you get an answer,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Error with data transfer configuration in solution manager

Dear SAP Support
i have a problem when i enter a tcode solution_manager > goto > data transfer configuration in my sap solutin manager system. the error appear
The requested URL could not be retrieved
While trying to retrieve the URL: http://solman.wilmar.com:8000/sap/public/myssocntl?
The following error was encountered:
Unable to determine IP address from host name for solman.wilmar.com
The dnsserver returned:
Name Error: The domain name does not exist.
This means that:
The cache was not able to resolve the hostname presented in the URL.
Check if the address is correct.
Your cache administrator is webmaster.
Generated Sat, 15 Sep 2007 10:03:30 GMT by proxy (squid/2.5.STABLE11)
are there any solution so i can fix my problem above. thanks.

Hi Herry,
Are you working in the same network?
Are you able to ping the domain?
Just an idea.
Regards, Ruediger

SLD Data Transfer Error

Similar Messages

Maybe you are looking for