SLD doubt+ how to connect DEv & QAC to SOLMAN

Hi friends,
While installing Solution manager, i chose an option "configure local SLD".
Also i installed my DEV and QAC SAP systems before i installed SOLMAN.
I would like to know how i can connect my DEV QAC (PRD is not installed yet) to the SOLMAN,
Where in DEV & QAC sap systems can i feed the details of local SLD that is configured on SOLMAN.
All i want to know is how can i connect other sap systems to SLD of Solutoin manager so that DEV and QAC details starts getting reflected in SMSY tcode...
Your assistance would be highly appreciated,..
Regards
Ayush

Hello Ayush,
Please use the following link which should assist you in connecting the Other systems of your landscape to SLD.
Configuring Systems to Connect to SLD
http://help.sap.com/saphelp_nw04s/helpdata/en/42/efba5e93d51bc9e10000000a11466f/frameset.htm
The Purpose of the above link is, Systems that are installed in your system landscape periodically send data to the SLD. You have to configure the systems to connect to SLD and periodically send data.
Hope it helps.
Regards,
Satish.

Similar Messages

How can connect to oracle8 server(install in RedHat6.0)

I have installed Oracle Standard Edition 8.0.5.1
in RedHat6.0 . Now I can't connect to it with Windows95
client.
get an ORA-12500 error.
1. successful start Oracle use "dbstart"
2. successful start the LISTENER use "lsnrctl" -- 'start'
to /home/oracle/805/network/log/listener.log
Listening on: (ADDRESS=(PROTOCOL=tcp)(DEV=6)
(HOST=xxx.xxx.xxx.xxx)(PORT=1521))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=magic.com)(PORT=1521)
(COMMUNITY=UK_SUP_TCPIP))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for linux ......
Start Date 23-FEB-98 20:38:50
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security OFF
SNMP ON
Listener Parameter
File /home/oracle/805/network/admin/listener.ora
Listener Log
File /home/oracle/805/network/log/listener.log
Services Summary...
xoracle has 1 service handler(s)
The command completed successfully
LSNRCTL> exit
null

Hi Sushama,
Seeburger AS2 Adapter supports the SFTP using PI
Have you checked this threads
Help needed for SFTP on Seeburger
How to connect SFTP from the XI
Regards
Ramesh

How to connect THR880i

I have the followings doubts:
- I would like to know how connect 2 devices THR880i.
- How to connect to transfer data in a Tetra.
- How the device THR880i connect in a PC.
I have already tried this option :install cable drive at nokia suite.
thanks
Denis

Not at least according to the UG:
In the direct mode, you cannot send or receive
status or text messages, make or receive network mode calls, use the Web browser
or the data connection, or activate fast menu items that require the use of the
network. To use radio functions that require the use of the network, activate the
network mode, and return to the network coverage area.
So data transfer requires network access.
- Pet

How to connect to Internet through a LAN

Hi everybody !!!
Please show me how to connect to Internet through a LAN (through another computer).
On Windows XP system, i use the following informations to do that:
+ My IP: 192.168 .1.45
+subnet mask: 255.255.255.0
+default getway: 192.168.1.12 (IP of another machine)
+Preferred DNS server: 85.255.192.2
+Alternate DNS server: 195.131.52.130
and in IE i use the proxy server: 192.168.1.12:8080
Thanks alot !!!

Just how is the one computer connecting to the internet? What type of connection does the office have, DSL, Cable or is it a Data connection through a Cell phone provider.
I doubt all other computer are doing Ad-Hoc but are probably Sharing the Internet connection with Internet Connection Sharing from that one Windows base PC.
All you khave to do is Connect to that same WiFi SSID name and have the correct password for it.

How to connect mysql database using xml

welcome to all,
here my doubt is how to connect mysql database using xml file, how to integrate xml file and jsp file and how to access data from dabase using jsp file. can any one help me
regards

Short answer: you wouldn't do any of those things. The first two are meaningless and the third is a bad practice. I have no idea what those ideas were supposed to achieve so I have no idea what tutorials I should suggest to you.

How to connect to BAPIS Using webdynpro for java?

Hi guys ,
I am new to sap world . Can any body give overview how to
connect BAPIS FUNCTION MODULES using in webdynpro?

Hi Ramana,
Welcome to SAP world.
You have lot of tutorials at SDN on the using BAPI's in WebDynpro.
Please go through this link and follow the tutorial :
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/f0b0e990-0201-0010-cc96-d7ecd2e51715
Make sure you configure your SLD and create JCO connections which is also given in the above link.
Also go through the following link.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/38bc8f813719488ddc9d9b21251ec3/frameset.htm
Do get back incase u need further explanation.
All the best.
Thanks & Regards,
Vijith

How to connect ECC 5.0 system from EP?

Hi
I want to connect ECC 5.0 system, which is located in a remote SLD, from EP 6.0.
If anyone knows, please post the step by step details .
Thanks and Regards,
Abdul Kareem.S

Hello Abdul,
This should help you
How to connect IDES ECC 5.0 to EP ?
Also check
http://help.sap.com/saphelp_nw04/helpdata/en/77/931440a1c32402e10000000a1550b0/frameset.htm
regards
Mahesh

How to connect to the repository?

Hi,
i want to transform the information of the design and configuration objects from the repository into Topic Maps.
Therefore i need to connect somehow to the repository and read its data.
Does anyone know how to do this?
Is the repository stored in the MaxDB?
And: how to connect to it from a JAVA console application?
I also need to read the data from the SLD and BPM
best regards,
ms
PS: i need to do this for my thesis.

Manuel,
Check these blogs and see if this is what you want,
<a href="/people/felix.jeyareuben/blog/2007/03/20/xi--reverse-engineering-1-150-software-component">XI - Reverse Engineering #1 Software Component</a>
<a href="/people/felix.jeyareuben/blog/2007/03/22/xi-150-reverse-engineering-2-150-dependencies-in-swc-amp-adding-a-namespace">XI Reverse Engineering #2 Dependencies in SWC & adding a namespace</a>
regards
Bhavesh

Error during executing the tp command 'tp Connect DEV...

Dear All,
   There is error when I SPAM support package SAPKB70010.(SAP ECC6.0)
   Info:
   Import phase 'CHECK_REQUIREMENTSS'
   \HOSTNAME\SAPMNT\trans\bin\TPPARAM
   Error during executing the tp command 'tp connect DEV...'
   TP return cod:'0208', tp message:'error in transportprofil (param missing,unknow..'tp output
   sapmnt\trans\bin\TPPARAM could not be opened.
EXIT
ERROR:
System: Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in
hostname\sapmnt\trans\bin\TPPARAM: transdir not set.
tp return code Summary:
TOOLS:Hightest return code of single steps was:0
ERRORS: Highest tp internal error was:0208
My environment:
Win2003 X64
Oracle 10.2
SAP ECC 6.0 Basis 700 09
Kernel patch num:254
How to solve the issue?
Thank you very much!

Hi
2 possible problems.
1) tp is using the wrong profile
2) the profile is not complete
For 1, specify the profile when using the tp command e.g. tp connect dr1
pf='/usr/sap/trans/DR1/bin/TPPARAM'
For 2 you need to edit the TPPARAM file and insert the correct values e.g.
DR1/sapevtpath = /usr/sap/$(system)/SYS/exe/run/sapevt or you can add
it into the command line with the -D option
At the command prompt enter 'tp connect' and the help file will be
displayed for that command with the available options
Cheers
Nirav Kundaria

How to connect tibco ems with sap xi engine?

hi friends,
how to connect tibco ems with sap xi engine?
plz explain me in brief. if possible plz give some link.
thanks & regards
Ruban

Hi Ruban
refr this links
Re: XI 3.0 - Tibco integration
<b>IBCO -> XI SCENARIO -> Web Service</b>
http://dev.systinet.com/doc/ssc-60/primer/html/using.web.services.html
http://www.estrategy.gov/presentations/umd_e-gov_ent_arch/sld015.htm
General disadvantages of using web service
http://www.samspublishing.com/articles/article.asp?p=31555&rl=1
http://www.omg.org/news/whitepapers/CORBA_vs_SOAP1.pdf
Replace TIBCO with XI
Tibco & XI
XI integration with Tibco
<b>
Aslo see the below links</b>
XI Vs Tibco Vs Webmethods
Re: Why XI ??
Differences between Tibco BW and how to do canonical mapping in XI
http://www.sap.com/solutions/netweaver/pdf/BWP_SB_ExchangeInfrastructure.pdf
XI integration with PSFT/Seibel ?
Performance statistics of SAP XI
/thread/154189 [original link is broken]
publish subscribe with XI
XI in SRM, CRM, MDM
XI implementation - xi implementation
Thanks!!

How many connection of BW

Hi gurus,
I have a doubt , how many BW connection is possible for one r/3 source system.
Thanks

hi Akash,
check Note 775568 - Two and more BW systems against one OLTP system
hope this helps.
Summary
Symptom
Several BW systems are loading data from an OLTP system: Can problems occur during the delta upload?
Other terms
Delta request; Delta queue; RSA7; Time stamp
Reason and Prerequisites
No documentation exists.
Solution
This note replaces the documentation where it is not yet available.
The delta queue always supports multiple BW connections to an OLTP system. The DataSources that use the delta queue function to process their deltas are not problematic, even if multiple BW systems send their delta initialization and delta requests in parallel. This affects most OLTP applications, for example, the logistic cockpit, HR, EC-CS, EC-PCA, CRM, SRM, utilities and so on.
Caution:
The "Several BW systems at one OLTP system" function is not generally supported for the "old" LIS DataSources that are generated on the basis of the LIS information structures. The delta mechanism for these DataSources only provides for one BW system. However, since these DataSources have been almost completely replaced by the cockpit logistics functions, the risk to customers who are just about to plan their BW projects is minimal to non-existent.
However, there is a problem for customers using DataSources with their own time stamp administration.
The problem is restricted to extractors that determine the delta directly via a time stamp during the extraction (for example, CO-OM, FI-AR, FI-AP, FI-GL, CO-PA up to and including PI 2003.1, CFM, CML, generic delta using a time stamp). In this case, currently extracted records are technically sent to the requesting BW on the one hand, and on the other hand, written to the delta queue (RSA7) for a possibly required repeat and even for the deltas of other BW systems. The new time stamp that is then set is used during the extraction for the next delta. If this takes place from a second BW, the process described above is run again, but an additional selection is made according to existing records in the SAPI delta queue that this BW has not yet retrieved. The problem with the second initialization for this type of extractor occurs at this point:
If delta initialization requests run from several BW systems in parallel, the time stamp pointer of the delta administration that is set at the end of the first delta initialization is overwritten by the second one. This may result in data that was already extracted in the delta initialization appearing in the subsequent delta from the first BW system.
The problem occurs with chronologically overlapping delta initialization requests. These problems may also occur with overlapping delta initializations from two BW systems.
With two parallel deltas, duplicate records can appear in the worst cases: If two BWs request delta simultaneously, the time stamps for the upper limit of the selection are taken without the system being aware of the other extraction. However, this is unproblematic as long as the goal is an ODS object with a MOVE update.
To avoid the danger of possible data inconsistencies, complete the Init run from a BW system BEFORE you start an Init or delta run from the other BW system. That is, check on the monitor that the status of the delta Init request is green before you request an Init request from the other BW system. A lock mechanism is provided for CO-OM and is described in note 736394. The other applications mentioned here are currently working on a permanent and satisfactory solution.

How to connect my friends apple notebook through video call

HOW TO CONNECT TO A FRIEND WHO IS USING APPLE NOTEBOOK FROM MY IMAC SUGGEST ME WAITING FOR A SOLUTION FROM APPLE TEAM SUPPORT

Hi,
Typing in all upper case is regarded and shouting here.
Presumably as you have posted in the OS X 10.7.x (Lion) area you are running this version of the OS on your iMac.
This will have iChat 6 on it.
This can use AIM, Jabber and Yahoo IDs within the app.
Apple IDS ending in @mac.com and iCloud issued @me.com and @icloud.com are also Valid AIM Screen Names.
If you use Googlemail and Enable "talk" in the products there you can then use your Google Mail ID as a Jabber ID (although it has it's own Add Account option in iChat)
Facebook has an option to Enable "Chat" which will give you a Chat ID variant on your name there and this can be used in iChat (or Messages) as a Jabber ID.
The Yahoo Account will only do Text chats.
It also has to be an actual ID registered at Yahoo.
Chats are then AIM to AIM or Jabber to Jabber or Yahoo to Yahoo.
So your Buddy will also need a suitable ID or Screen Name for the relevant service.
8:16 pm Sunday; January 19, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

I need to know how to connect my macbook to the tv

I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.

Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
Luck
E

How to connect a Sony Bravia TV to the internet through your Airport network

Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

I have now had a detailed reply from Sony Europe and the way to do this is to:
1.       Press Home on the TV Setup
2.       Use the right and left arrow to select Setting.
3.       Use the up and down to select Network, press Enter.
4.       Select Network Setup.
5.       Select Wireless setup.
6.       Select Scan
7.       Select your network
8.       A new screen will appear asking for entering the security key.
9.       Enter your WPA2 key.
10.   Select Enter.
11.   It will take you back to the same screen asking for entering the
security key.
12.   Press the right arrow.
13.   Select Auto.
14.   Press the right arrow.
15.   Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

SLD doubt+ how to connect DEv & QAC to SOLMAN

Similar Messages

Maybe you are looking for