SLD entry shows up with incorrect usage type registered

I have CRM installed and hooked into a standalone SLD. The SLD has all of the correct entries in there for the ECC and BI system but the CRM system shows up as an ABAP and Java system..
It is only an ABAP system, where can I trace to see what is being reported to the SLD
Mikie

There is something amiss in the data entered in your Apple account. Sign in to your Apple ID and triple check all information associated with your payment info, it could be something as simple as a misspelling of an address or one digit off in the phone number associated with the account. You can check your Apple ID here:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

Similar Messages

Some pictures show up with incorrect colors

some pictures show up with incorrect colors(eg. a person with green skin), and on Yahoo mail, the background which is supposed to be blue shows up as pink, as does the place where a user avatar would be.

This can be caused by a problem with the color profile for your display monitor or color profiles embedded in images. 
You can disable color management to test that. 
You can set the pref gfx.color_management.mode to 0 on the about:config page to disable Color Management. 
You need to close and restart Firefox or maybe even reboot the computer to make the change effective. 
See http://kb.mozillazine.org/gfx.color_management.mode
See https://developer.mozilla.org/En/ICC_color_correction_in_Firefox

Ipod showing up with incorrect name

I just plugged in my iPod (after using it for months with no problem) and suddenly the iPod is showing the wrong name. It should show up with the name I gave it obviously, but suddenly it shows up as a network share name that my company has. It also shows the stats as being a network share, i.e. no songs, the available space on the network share. It's almost as if it is not truly reading the iPod. The iPod is functioning normally otherwise.
I haven't tried it unplugged from the network, because it used to work just fine when attached while I'm at work. Any ideas while iTunes would suddenly show the iPod as incorrect.
IBM Thinkpad Windows XP Pro

See this Article: “Strange iPod Behavior within Windows”

Vendor Returns with 161 Movement type - Register Problem

Hi Every one,
I using the Returns PO for returning the Goods to the Vendor.
I am following the below process.
1. ME21N - Create a Returns PO (Activate "Returns" indicator for PO line item)
2. MIGO - Goods Receipt > Purchase Order (Returns PO) (Here system will hit Mvmt type "161" and you can also select Un-restricted/blocked stock from where you want to return the stock)
3. J1IS u2013 Excise Invoice Other Movements
Here click on u201Ccreateu201D button to create an outgoing excise invoice and reverse the CENVAT Amount.
Here put all details as below and Press u201CEnteru201D.
Ref.doc.type - MATD
Doc Number - Material document No of 161 mvmt
Doc Year
Series Group
Excise Group
Vendor
Here check BED, ECS and SECess values to be reversed and click on u201CSaveu201D button to post the excise invoice.
4. J1IV - Post and Print Outgoing Excise Invoice.
5. MIRO - Credit memo w.r.t. Returns PO.
as suggested in one of the threads.
The Problem I am facing the when update the registers with J215 and download with J2I6, it is not being updated properly.
The balance Quantity Column (Column M) in the excel which is download, instead of decreasing the quantity is getting increased.
for the First PO the Qty is 1000
for the Second PO the Qty is 1010
for the third PO the Qty is 1020 even though the PO is Return PO with qty 10.
Please guide me to solve this problem.
Thanks

Hi,
Check the Register update against Movt type in config setting as under
Spro Logistics u2013 GeneralTax on Goods MovementsIndiaBusiness TransactionsIncoming Excise InvoicesSpecify Which Movement Types Involve Excise Invoicesu2014here check whether for movt type 161 is there Register update is maintained or not I hope it is not maintained which results in Register is not getting updated.
Rg

Backing up and restoring EP 7.0 (With Usage type DI installed) on HP-UX

Hello,
I know and saw several blogs/forums for Portal/Java WebAS 640 backup and restore and most of them says to backup Oracle and backup filesystems (/usr/sap/SID/* and /sapmnt/SID/* and ofcourse oracle).
WE have never tested our restore on our Portal system which has DI (Dev Infrastructure) installed with it, hence need to know is it just enough to backup the above files systems (and also /home/sidadm and /etc) AND then just restore the oracle backup, and above files systems and system will be up and running with all the DI developments we did?
We are about to apply our first round of Stacks on EP system (NW04s) with DI usage type, hence we want to test our restore if everything goes fine in case we have to do that.
Our env:
EP/DI on HP UX - currently going to stack 15
Oracle on AIX
Your response is greatly appreciated.
Thanks
WA

we tried to just restore the Filesystem and database and without any efforts we were able to startup java.

Usage type issue with PI upgrade from 7.01 to 7.11

Hi guys,
We are currently performing an upgrade on our PI system.
We are upgrading from PI 7.01 to PI 7.11 and we've come cross an issue during the prepare phase of the install.
An error has occurred during the execution of the CHECK_SUPPORTED_SOURCE_USAGES phase.
This upgrade doesn't support upgrade of sap.com/MI usage detected on the source system.
You can find more information in the log file /usr/sap/PI3/upg/java/log/CHECK_SUPPORTED_SOURCE_USAGES_SSU_01.LOG.
Use the information provided to troubleshoot the problem. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following key words: com.sap.sdt.j2ee.phases.PhaseTypeCheckSupportedSourceUsages com.sap.sdt.j2ee.tools.check.NegativeResultException This upgrade doesn't support upgrade of sap.com/MI usage detected on the source system. CHECK_SUPPORTED_SOURCE_USAGES INIT PREPARE NetWeaver Upgrade SAPJup Java Upgrade
When reporting problems to SAP Support, attach the trouble ticket file /usr/sap/PI3/upg/java/log/TroubleTicket_01.txt to your message.
We've looked through the main upgrade notes and they mention which usage types are supported, but they do not mention explicity what usage are not supported, and how to proceed with the upgrade if your system does have one of these non-supported usage types.
Considering our system does contain usage type MI, does this mean that we cannot upgrade our current PI system to 7.11?
Please help!
Thanks,
Steph

Hello
Please see note #1247043 Release Restrictions for EHP 1 for SAP NetWeaver PI 7.1 - section "Upgrade: source system must be a dedicated PI system".
It is not possible to upgrade an existing system with the usage type MI. Even if you delete the usage type MI (if this is possible) the upgrade will not be possible.
Regards
Mark

Selection of usage type for EHP7 SPS02 ERP 6.0 Upgrade

Hi Experts,
We are planning to upgrade our SAP ECC 6.0 to EHP7 SP02 ERP 6.0, But during MOPZ configuration to generate the side effect report, its prompting to choose at least one technical usage type. I am not able to judge which is the right usage type to our environment. I have checked with functional team and they said our business type is Logistics but in the list logistics not found.
Here i have attached this list of components installed in our system and list of usage types which is showing in MOPZ. Please suggest me with correct usage type to proceed.
Thanks in advance,
Regards,
Suresh Babu
Component
Release
SP Level
Support Package
Description of the component
SAP_BASIS
700
21
SAPKB70021
SAP Basis Component
SAP_ABA
700
21
SAPKA70021
Cross-Application Component
PI_BASIS
2006_1_700
11
SAPKIPYM11
Basis Plug-In (PI_BASIS) 2006_1_700
ST-PI
2008_1_700
8
SAPKITLRD8
SAP Solution Tools Plug-In
SAP_BW
700
23
SAPKW70023
SAP NetWeaver BI 7.0
SAP_AP
700
20
SAPKNA7020
SAP Application Platform
SAP_APPL
600
17
SAPKH60017
Logistics and Accounting
SAP_HR
600
59
SAPKE60059
Human Resources
SAP_HRCAR
600
59
SAPK-60059INSAPHRCAR
Sub component SAP_HRCAR of SAP_HR
SAP_HRCAT
600
59
SAPK-60059INSAPHRCAT
Sub component SAP_HRCAT of SAP_HR
SAP_HRCAU
600
59
SAPK-60059INSAPHRCAU
Sub component SAP_HRCAU of SAP_HR
SAP_HRCBE
600
59
SAPK-60059INSAPHRCBE
Sub component SAP_HRCBE of SAP_HR
SAP_HRCBR
600
59
SAPK-60059INSAPHRCBR
Sub component SAP_HRCBR of SAP_HR
SAP_HRCCA
600
59
SAPK-60059INSAPHRCCA
Sub component SAP_HRCCA of SAP_HR
SAP_HRCCH
600
59
SAPK-60059INSAPHRCCH
Sub component SAP_HRCCH of SAP_HR
SAP_HRCCN
600
59
SAPK-60059INSAPHRCCN
Sub component SAP_HRCCN of SAP_HR
SAP_HRCDE
600
59
SAPK-60059INSAPHRCDE
Sub component SAP_HRCDE of SAP_HR
SAP_HRCDK
600
59
SAPK-60059INSAPHRCDK
Sub component SAP_HRCDK of SAP_HR
SAP_HRCES
600
59
SAPK-60059INSAPHRCES
Sub component SAP_HRCES of SAP_HR
SAP_HRCFI
600
59
SAPK-60059INSAPHRCFI
Sub component SAP_HRCFI of SAP_HR
SAP_HRCFR
600
59
SAPK-60059INSAPHRCFR
Sub component SAP_HRCFR of SAP_HR
SAP_HRCGB
600
59
SAPK-60059INSAPHRCGB
Sub component SAP_HRCGB of SAP_HR
SAP_HRCHK
600
59
SAPK-60059INSAPHRCHK
Sub component SAP_HRCHK of SAP_HR
SAP_HRCID
600
59
SAPK-60059INSAPHRCID
Sub component SAP_HRCID of SAP_HR
SAP_HRCIE
600
59
SAPK-60059INSAPHRCIE
Sub component SAP_HRCIE of SAP_HR
SAP_HRCIN
600
59
SAPK-60059INSAPHRCIN
Sub component SAP_HRCIN of SAP_HR
SAP_HRCIT
600
59
SAPK-60059INSAPHRCIT
Sub component SAP_HRCIT of SAP_HR
SAP_HRCJP
600
59
SAPK-60059INSAPHRCJP
Sub component SAP_HRCJP of SAP_HR
SAP_HRCKR
600
59
SAPK-60059INSAPHRCKR
Sub component SAP_HRCKR of SAP_HR
SAP_HRCMX
600
59
SAPK-60059INSAPHRCMX
Sub component SAP_HRCMX of SAP_HR
SAP_HRCMY
600
59
SAPK-60059INSAPHRCMY
Sub component SAP_HRCMY of SAP_HR
SAP_HRCNL
600
59
SAPK-60059INSAPHRCNL
Sub component SAP_HRCNL of SAP_HR
SAP_HRCNO
600
59
SAPK-60059INSAPHRCNO
Sub component SAP_HRCNO of SAP_HR
SAP_HRCNZ
600
59
SAPK-60059INSAPHRCNZ
Sub component SAP_HRCNZ of SAP_HR
SAP_HRCPH
600
59
SAPK-60059INSAPHRCPH
Sub component SAP_HRCPH of SAP_HR
SAP_HRCPT
600
59
SAPK-60059INSAPHRCPT
Sub component SAP_HRCPT of SAP_HR
SAP_HRCRU
600
59
SAPK-60059INSAPHRCRU
Sub component SAP_HRCRU of SAP_HR
SAP_HRCSE
600
59
SAPK-60059INSAPHRCSE
Sub component SAP_HRCSE of SAP_HR
SAP_HRCSG
600
59
SAPK-60059INSAPHRCSG
Sub component SAP_HRCSG of SAP_HR
SAP_HRCTH
600
59
SAPK-60059INSAPHRCTH
Sub component SAP_HRCTH of SAP_HR
SAP_HRCTW
600
59
SAPK-60059INSAPHRCTW
Sub component SAP_HRCTW of SAP_HR
SAP_HRCUN
600
59
SAPK-60059INSAPHRCUN
Sub component SAP_HRCUN of SAP_HR
SAP_HRCUS
600
59
SAPK-60059INSAPHRCUS
Sub component SAP_HRCUS of SAP_HR
SAP_HRCVE
600
59
SAPK-60059INSAPHRCVE
Sub component SAP_HRCVE of SAP_HR
SAP_HRCZA
600
59
SAPK-60059INSAPHRCZA
Sub component SAP_HRCZA of SAP_HR
SAP_HRGXX
600
59
SAPK-60059INSAPHRGXX
Sub component SAP_HRGXX of SAP_HR
SAP_HRRXX
600
59
SAPK-60059INSAPHRRXX
Sub component SAP_HRRXX of SAP_HR
EA-IPPE
400
17
SAPKGPID17
SAP iPPE
EA-APPL
600
17
SAPKGPAD17
SAP Enterprise Extension PLM, SCM, Financials
EA-DFPS
600
17
SAPKGPDD17
SAP Enterprise Extension Defense Forces & Public Security
EA-FINSERV
600
17
SAPKGPFD17
SAP Enterprise Extension Financial Services
EA-GLTRADE
600
17
SAPKGPGD17
SAP Enterprise Extension Global Trade
EA-HR
600
58
SAPKGPHD58
SAP Enterprise Extension HR
EA-HRCAR
600
58
SAPK-60058INEAHRCAR
Sub component EA-HRCAR of EA-HR
EA-HRCAT
600
58
SAPK-60058INEAHRCAT
Sub component EA-HRCAT of EA-HR
EA-HRCAU
600
58
SAPK-60058INEAHRCAU
Sub component EA-HRCAU of EA-HR
EA-HRCBE
600
58
SAPK-60058INEAHRCBE
Sub component EA-HRCBE of EA-HR
EA-HRCBR
600
58
SAPK-60058INEAHRCBR
Sub component EA-HRCBR of EA-HR
EA-HRCCA
600
58
SAPK-60058INEAHRCCA
Sub component EA-HRCCA of EA-HR
EA-HRCCH
600
58
SAPK-60058INEAHRCCH
Sub component EA-HRCCH of EA-HR
EA-HRCCN
600
58
SAPK-60058INEAHRCCN
Sub component EA-HRCCN of EA-HR
EA-HRCDE
600
58
SAPK-60058INEAHRCDE
Sub component EA-HRCDE of EA-HR
EA-HRCDK
600
58
SAPK-60058INEAHRCDK
Sub component EA-HRCDK of EA-HR
EA-HRCES
600
58
SAPK-60058INEAHRCES
Sub component EA-HRCES of EA-HR
EA-HRCFI
600
58
SAPK-60058INEAHRCFI
Sub component EA-HRCFI of EA-HR
EA-HRCFR
600
58
SAPK-60058INEAHRCFR
Sub component EA-HRCFR of EA-HR
EA-HRCGB
600
58
SAPK-60058INEAHRCGB
Sub component EA-HRCGB of EA-HR
EA-HRCHK
600
58
SAPK-60058INEAHRCHK
Sub component EA-HRCHK of EA-HR
EA-HRCID
600
58
SAPK-60058INEAHRCID
Sub component EA-HRCID of EA-HR
EA-HRCIE
600
58
SAPK-60058INEAHRCIE
Sub component EA-HRCIE of EA-HR
EA-HRCIN
600
58
SAPK-60058INEAHRCIN
Sub component EA-HRCIN of EA-HR
EA-HRCIT
600
58
SAPK-60058INEAHRCIT
Sub component EA-HRCIT of EA-HR
EA-HRCJP
600
58
SAPK-60058INEAHRCJP
Sub component EA-HRCJP of EA-HR
EA-HRCKR
600
58
SAPK-60058INEAHRCKR
Sub component EA-HRCKR of EA-HR
EA-HRCMX
600
58
SAPK-60058INEAHRCMX
Sub component EA-HRCMX of EA-HR
EA-HRCMY
600
58
SAPK-60058INEAHRCMY
Sub component EA-HRCMY of EA-HR
EA-HRCNL
600
58
SAPK-60058INEAHRCNL
Sub component EA-HRCNL of EA-HR
EA-HRCNO
600
58
SAPK-60058INEAHRCNO
Sub component EA-HRCNO of EA-HR
EA-HRCNZ
600
58
SAPK-60058INEAHRCNZ
Sub component EA-HRCNZ of EA-HR
EA-HRCPH
600
58
SAPK-60058INEAHRCPH
Sub component EA-HRCPH of EA-HR
EA-HRCPT
600
58
SAPK-60058INEAHRCPT
Sub component EA-HRCPT of EA-HR
EA-HRCRU
600
58
SAPK-60058INEAHRCRU
Sub component EA-HRCRU of EA-HR
EA-HRCSE
600
58
SAPK-60058INEAHRCSE
Sub component EA-HRCSE of EA-HR
EA-HRCSG
600
58
SAPK-60058INEAHRCSG
Sub component EA-HRCSG of EA-HR
EA-HRCTH
600
58
SAPK-60058INEAHRCTH
Sub component EA-HRCTH of EA-HR
EA-HRCTW
600
58
SAPK-60058INEAHRCTW
Sub component EA-HRCTW of EA-HR
EA-HRCUN
600
0
Sub component EA-HRCUN of EA-HR
EA-HRCUS
600
58
SAPK-60058INEAHRCUS
Sub component EA-HRCUS of EA-HR
EA-HRCVE
600
58
SAPK-60058INEAHRCVE
Sub component EA-HRCVE of EA-HR
EA-HRCZA
600
58
SAPK-60058INEAHRCZA
Sub component EA-HRCZA of EA-HR
EA-HRGXX
600
58
SAPK-60058INEAHRGXX
Sub component EA-HRGXX of EA-HR
EA-HRRXX
600
58
SAPK-60058INEAHRRXX
Sub component EA-HRRXX of EA-HR
EA-PS
600
17
SAPKGPPD17
SAP Enterprise Extension Public Services
EA-RETAIL
600
17
SAPKGPRD17
SAP Enterprise Extension Retail
FINBASIS
600
17
SAPK-60017INFINBASIS
Fin. Basis
C-CEE
110_600
23
SAPK-11023INCCEE
ECC Core Country Versions for EEM Countr
ECC-DIMP
600
17
SAPK-60017INECCDIMP
DIMP
ERECRUIT
600
17
SAPK-60017INERECRUIT
E-Recruiting
FI-CA
600
17
SAPK-60017INFICA
FI-CA
FI-CAX
600
17
SAPK-60017INFICAX
FI-CA Extended
INSURANCE
600
17
SAPK-60017ININSURANC
SAP Insurance
IS-CWM
600
17
SAPK-60017INISCWM
Industry Solution Catch Weight Management
IS-H
600
22
SAPK-60022INISH
SAP Healthcare
IS-M
600
17
SAPK-60017INISM
SAP MEDIA
IS-OIL
600
17
SAPK-60017INISOIL
IS-OIL
IS-PS-CA
600
17
SAPK-60017INISPSCA
IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT
600
17
SAPK-60017INISUT
SAP Utilities/Telecommunication
LSOFE
600
17
SAPK-60017INLSOFE
SAP Learning Solution Front-End
SEM-BW
600
17
SAPKGS6017
SEM-BW: Strategic Enterprise Management
ST-A/PI
01Q_700
2
SAPKITAB7L
Servicetools for other App./Netweaver 04

Hi Reagan,
I have already checked in SPAM & same status has been copied in the initial message.
Thanks,
Suresh Babu

How to install Additional Software Units or Usage Types in an Existing SAP

Hi.
We have a Netweaver 7.0 EPH1 with JAVA, EP and EPC intallation,but i need install additional usage type BI JAVA and NWDI.
Copy the downloaded SCAs in /usr/sap/trans/EPS/in and when execute JSPM - option Additional usage type installation, this not show usages type .
according to the installation guide, this is the procedure.
please help me.
Thanks very much.
Regards,
Jhon Jairo

Hi,
Once you have correctly extracted and put the files in /usr/sap/trans/EPS/in, you need to run JSPM and select the option of additional usage types.
Next, select the desired stack from the inbox. Click Next.
JSPM shows the currently installed usage types and those of the new usage types in the stack, which are part of the active product on the system and all of their dependencies are fulfilled. They can have different status:
Available u2013 the usage type is already active in the system. These usage types are automatically skipped.
OK u2013 the usage type can be installed on the system. Specify whether to install or skip the usage type in the Action column.
Revise u2013 the usage type cannot be installed on this system. Click the Show Details button for more information. These usage types are automatically skipped.
Not Supported - the usage type is not supported by JSPM.
Can you tell us what is the status of the usage types visible to you? Are the new usage types having a different status or are they not completely visible at all? If that is the case, you may want to check whether the files that you have downloaded are correct or not and also check whether these are correctly extracted and placed in the right folder.
Regards,
Shitij

BI java usage type installation error

hello everyone,
Please help me resolve the following:
Question1
the system was earlier installed with following usage types:
-as abap, as java, epc, ep (all on same machine)
Now i want to addin BI-Java. During the installation I encounter error at phase "Install Java Engine" as follows:
sapinst.log
INFO 2009-02-15 03:22:23
Output of C:\j2sdk1.4.2_12\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.security.core.server.secstorefs.SecStoreFS "
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_jce.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_jsse.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_smime.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_ssl.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib;C:/Program Files/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib;D:\usr\sap\DEV\DVEBMGS00\exe\ojdbc14.jar" insert -s DEV -f
sapdev/sapmnt/DEV/SYS/global/security/data/SecStore.properties -k
sapdev/sapmnt/DEV/SYS/global/security/data/SecStore.key admin/host/DEV sapdev is written to the logfile SecureStoreInsert.log.
WARNING 2009-02-15 03:22:24
Execution of the command "C:\j2sdk1.4.2_12\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.security.core.server.secstorefs.SecStoreFS "
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_jce.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_jsse.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_smime.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_ssl.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib;C:/Program Files/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib;D:\usr\sap\DEV\DVEBMGS00\exe\ojdbc14.jar" insert -s DEV -f
sapdev/sapmnt/DEV/SYS/global/security/data/SecStore.properties -k
sapdev/sapmnt/DEV/SYS/global/security/data/SecStore.key admin/host/DEV sapdev" finished with return code 2. Output:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store.
ERROR 2009-02-15 03:22:24
CJS-30051 Cannot insert a key value pair into the secure store fails; see output of log file SecureStoreInsert.log:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store..
SecureStoreInsert.log
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store.
oh and btw...the issue remains with both administrator/devadm
OR Question 2
If the above scenario isnt possible, and I performed an uninstall, and after installing all the usage types again, and recovering the database....will i be able to get my integrated BI/ERP client back with it .. or will i have to perform the setup of BI client again ?
Thanks for your valuable replies.
Regards,

First of all... As per SAP Installation guide additional usage type BI installation is POSSIBLE.
Please check SAP Note [883948|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=883948]
And I guess you have all the primary required components.i.e. ABAP,Java, EP, EPC ...
Question1
the system was earlier installed with following usage types:
-as abap, as java, epc, ep (all on same machine)
Now i want to addin BI-Java. During the installation I encounter error at
phase "Install Java Engine" as follows:
ERROR 2009-02-15 03:22:24
CJS-30051 Cannot insert a key value pair into the secure store fails; see output
of log file SecureStoreInsert.log:
A key/value pair with this key already exists in the store..
Above error is basically because of JDK and not because of BI
Please check following blogs...
[Re: key value pair error;
[SAPNW2004sJavaSP9_Trial- SecureStoreInsert ERROR;
SAP Note [1071472|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1071472]
As per this... following could be reason.
1. check that iaik_jce_export.jar file is NOT included into the CLASSPATH.
2.Use only one JDK version (or remove the other installed versions from the used environment variables).
3. SAP Note [739043|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=739043]
OR Question 2
If the above scenario isnt possible, and I performed an uninstall,
and after installing all the usage types again, and recovering the database....
will i be able to get my integrated BI/ERP client back with it ..
or will i have to perform the setup of BI client again ?
I guess It might be difficult to UNINSTALL - may cause some inconsistencies in the current system.
Still - If you really Don't want BI now... Best option could be full restore and recovery.- If you have consistent backup.
But if you want BI - then, since above problem is because of JDK , I think it could be resolved.
Let us know if anything....

PI in ECC 6.0, usage type AS ABAP

Dear all,
Is there any restriction on the functionalities of PI/XI in ECC 6.0 (with ABAP only)?
Can I have full XI functionalities if when I install ECC 6.0, I also check AS Java?
Giang

Hi Giang
SAP NetWeaver 7.0 - uage type PI corresponds to product version instance SAP ERP 6.0 - SAP NW - Process Integration.
PI requires AS ABAP and AS Java as prerequisites in the same system. Optionally, it can be combined with other usage types in one system.
Regarding installation with ECC on one server, see the following recommendation from the SAP ERP Master Guide, already mentioned:
"We recommend that you identify a dedicated PI system. For PI, no other system in your system landscape may have a higher release than the PI system. For exceptions to this rule, see SAP Note 1043047. "
regards,
Andreas R

Incorrect message type in IDOC for Purchase order change

Hi Gurus.
Please advise on below.
We have several purchase orders that are configured to trigger IDOC upon change. But accidentally, someone has deactiveted the automatic proposal of EDI message type for these Purchase orders which resulted to not transmitting purchase order change documents automatically.
As a workaround, we have proposed to create EDI message manually during Purchase order change. But upon checking in tcode WE09, message type is ORDERS which is PO create instead if ORDCHG for purchase order change.
Please kindly advice on why it is behaving like this for purchase orders with EDI message previously deactivated.
Thanks in advance.
Acel.
To simulate.
Create PO. go to messages, select EDI message then deactivate permanently. Save PO. Release PO if needed. Change PO. go to messages, EDI is not automatically proposed. create EDI message mamanually. Save PO. Release PO id needed. check tcode WE09, for PO create, no IDOC since it was deactivated permanently. For PO change, IDOC was triggered but with incorrect message type ORDERS instead of ORDCHG.

Hi Acel,
You will need to check the settings in transaction WE20 - You will be using a Partner Profile to determine the outbound message, either for each vendor or a generic one.
on the outbound parameters, you will need to ensure that ORDCHG is set up as a message type. If not, add it, ensuring that you use the message ORDCHG, the basic type (or extension) that you are using, usually ORDERS05 and make sure that in message control, you have process code ME02 set up. This should enable the correct message type to be determined.
Regards,
Rob

List of BOM usage types

Hi ,
Here is the requirement .
1. Select material,Plant,Usage type from table MAST based on the selection criteria .
2. For a given material and plant combination, with what usage types the material bom is created .
Sample output :
Material Plant Usage_one Usage_three Usage _five
Mat-123 P-123 X X X
Mat-123 P-234 X X
The above output says that for mat-123 and p-123 combination bom with usage type 1,3, and 5 have been created but for mat-123 and p-234 combo only 1 and 5 have been maintained .
Can anyone please let me know how the logic should be developed to generate output in this format ?
Thanks ,
Daniel .

Thanks for the quick response Michelle even if it gave me an answer I didn't want ;-( Oh well. Onwards and upwards.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

SAP Netweaver - What are Usage Types?

I would just like to clarify as to what are Usage Types? What role they play in the installation of an SAP Netweaver System? Upon adding Usage Types, for instance, BI or PI, will it mean that the SAP Product that you are installing with these Usage Types will enable BI or PI to exist within the product you are installing? I would just like to deepen my knowledge with regards to this. Awards will be provided accordingly depending on the knowledge gain that will be acquired.

Hi,
Usage types are the software units to be installed and configured according to the needs.
All are present inside the s/w bundle.by checking the boxes you are enabling those services.
Suppose you want PI then u need to check the as JAVA and as ABAP.
Regards,
Spandan

Upgraded to 5.0, then 5.0.1. In the process the various calendar "types" disappeared, but at least all entries showed in Ical, with entries made after the upgrade showing pinkish/red. Yesterday all formerly made entries, disappeared. any tips?

Upgraded to 5.0, then 5.0.1. In the process the various calendar "types" disappeared, but at least all entries showed in Ical, with entries made after the upgrade showing pinkish/red. Yesterday all formerly made entries, both old and in the future, disappeared, only recently made ones in pink/red are shown. any tips?
I did switch off and on, did a sync with itunes, etc, but no luck.

RIM doesn't push the upgrades -- your service provider does so, once they have certified and approved the operating system upgrade for their devices.
But, .973 does work on the 9520 in the manner you wish it would, I've used it myself on that model.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sld started giving error after installation of additional usage type.....

Hi Experts,
I had a BW server with dual stack (AS ABAP + AS Java only base u2013 No BI u2013 Java server). Everything was running fine and I have checked that http://server:port/nwa, http://server:port/useradmin and http://server:port/sld was browsable although I didn't configured SLD.
My BW developer team wanted to use BEX web reports and for the same I have installed following add on usage type as per note 883948 as I had only upto SPS9 as a default installation.
u201C
Components of EPC (UT_NAME = EPC) SAP NetWeaver 7.0 (2004s) >= SPS09 < SPS11:
|FILE NAME |DESCRIPTION
|EPBC*_.SCA |PORTAL CORE SERVICES 7.00
|EPBC2*_.SCA |PORTAL FRAMEWORK 7.00
|EPPSERV*_.SCA |PORTAL 7.00
|EPWDC*_.SCA |PORTAL WEB DYNPRO 7.00u201D
And
UTs of SAP NetWeaver 7.00 (2004s):
Components of BI (UT_NAME = BI):
|FILE NAME |DESCRIPTION
|BIIBC*_.SCA |BI INFORM. BROADCASTING 7.00
|BIWEBAPP*_.SCA |BI WEB APPLICATIONS 7.00 (SP <current
version>)
|BIBASES*_.SCA |BI BASE SERVICES 7.00 (SP <current version>)
|BIREPPLAN*_.SCA |BI REPORTING AND PLANNING 7.00
|BIWDALV*_.SCA |BI WEBDYNPRO ALV 7.00
|VCKITBI*_.SCA |VCKITBI
But after this I checked and found that browsing SLD (http://server:port/sld ) started giving erroru2026. The error says something like belowu2026.
The initial exception that caused the request to fail, was:
com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''sap.com/tcsldwd~main'' for
startup. Reason= Clusterwide exception: Failed to start application ''sap.com/tcsldwd~main'': The referenced application ''sap.
com/tcsldwd~businesssystem'' can''t be started. Check the causing exception for details. Hint: Is the referenced application deployed correctly on the server?
at at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
at at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
at at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:176)
at at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
at at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
... 8 more
See full exception chain for details.
The Full exception chain is like belowu2026.
System Environment
Client
Web Dynpro Client Type HTML Client
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0009.20060804145649.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:39:25[UTC], changelist=413534,
host=pwdfm101), build date: Tue Dec 23 13:37:24 IST 2008
J2EE Engine No information available
Java VM IBM J9SE VM, version:2.2, vendor: IBM Corporation
Operating system Linux, version: 2.6.16.60-0.39.3-smp, architecture: amd64
Session & Other
Session Locale en_US
Time of Failure Wed Jul 29 08:53:29 IST 2009 (Java Time: 1248837809764)
Web Dynpro Code Generation Infos
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.sal.core.DispatcherException: Failed to start deployable object sap.com/tcsldwd~main.
at com.sap.tc.webdynpro.clientserver.session.RequestManager.getApplicationDeployableObjectPart(RequestManager.
java:404)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.initTask(RequestManager.java:317)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:143)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.services.sal.deployment.core.StartStopException: Failed to start the deployable object
'sap.com/tcsldwd~main'.
at com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObject.start(DeployableObject.java:184)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.getApplicationDeployableObjectPart(RequestManager.
java:399)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.initTask(RequestManager.java:317)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:143)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.spi.WebDynproRuntimeException: Failed to start application 'sap.com/tcsldwd~main'.
Check if all defined references are deployed on the engine.
at com.sap.engine.services.webdynpro.WebDynproRuntimeServiceImpl.start(WebDynproRuntimeServiceImpl.java:270)
at com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObject.start(DeployableObject.java:182)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.getApplicationDeployableObjectPart(RequestManager.
java:399)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.initTask(RequestManager.java:317)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:143)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare
application ''sap.com/tcsldwd~main'' for startup. Reason=
Clusterwide exception: Failed to start application ''sap.com/tcsldwd~main'': The referenced application ''sap.com/
tcsldwd~businesssystem'' can''t be started. Check the causing exception for details. Hint: Is the referenced
application deployed correctly on the server?
at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:176)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal
(ApplicationTransaction.java:365)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.
java:132)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.
java:250)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.
java:4504)
at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationLocalAndWait
(DeployCommunicatorImpl.java:609)
at com.sap.engine.services.webdynpro.WebDynproContainer.startExternal(WebDynproContainer.java:646)
at com.sap.engine.services.webdynpro.WebDynproRuntimeServiceImpl$ApplicationStarter.run
(WebDynproRuntimeServiceImpl.java:460)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
http://
Edited by: Soumen Chattopadhyay on Aug 2, 2009 10:49 AM

Dear Rishi,
Thanks for your reply...Here are the answers to your query....Any help?
Query:
"As you said that you dint configure the SLD but the link was working fine before.ou would have given the detailsduring the time of installation."
Ans: As I remember I didn't ....But cant say surely...Yes I remember I executed 2/3 times RZ70 but there was some issue regarding the transfer of data thru RFC SLD_UC ...saying program no resistered etc...
Query:
After the application of the patch is the Url comming up did you check that server node is up.
Ans: Server node is up and running, able to login and work thru SAPGUI and also the urls for java instances e.g, http://server:port/nwa,http://server:port/useradmin,http://server:port/irj are working...ie. I mean able to browse ar see some content inside. but http://server:port/sld gave the error I posted earlier in this message.
Query:
Plese let me know that have you configured the Local SLD of Central SLD.
Did you addd the Bi system as technical system in the SLD.
Ans: Nope..Anything came is came by default.

SLD entry shows up with incorrect usage type registered

Similar Messages

Maybe you are looking for