Sld host name ?

hi friends
       In sld technical system enter information
     web as name (sid) -
    instalation number -
database host name -
      host name -
      message port -
above mention are to give by our own naming convention or given by system convention i mean web as name (sid)/ instalation number
database host name / host name/ message port if it has to be give by system name conventions where can i fine out host name in system what is transcation code for host name ?
help me
raj

Hello Raja ,
Go to transaction SMICM --> Go to (Menu) --> parameters --> Display.
Move acorss the list of parametes displayed and you will find the Fully Qualified hostname -
icm/host_name_full
Hope tihs is useful for you.
With Regards,
Raju.
**********Please reward points if found useful.

Similar Messages

SAP_HTTPServicePort URLs in SLD for PI are updated by SLD host name itself

We have upgraded our PI 7.0 to 7,1. We have a central SLD. After the upgrade, SAP_HTTPServicePort URLs (in SLD Content maintenance) for the PI are all getting initialized with SLD host name itself.
Example: for port.CIDX.af.pip.<PIPhostname>
URL: http://solman:50100/MessagingSystem/receive/CIDXAdapter/CIDX
solman is my central SLD.
This is happening in our production system only. In Dev/QAS systems, the behavior is normal like
http://PIDHostname:50000/MessagingSystem/receive/CIDXAdapter/CIDX
I have tried to update the URLs manually, but, when the instance is bounced, the SLD is getting refreshed with the erroneous URLs.
I want to know where from the SLD content is refreshed?

There are two ways....
Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
regards,
Arvind R

How to change host name for SLD

Hi All,
How is possible to change host name of SLD configuration?
I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
How can i do it?
Thanks a lot!
Alex

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

SLD Error : No host name defined in Exchange profile sld.SID.host

Hi,
I am trying to do the configuration for the pre built examples (Airlines, Agency ) using XI after installation.
But when I installed XI and did the post install configuration, I had mentioned 000 as Integration server and configured the same using the SLD (URL) in business system configuration.
But when I was doing the configuration for the example, I wanted to configure the client 100 as integration server on SLD (under business systems) , so I deleted the old business system pointing to client 000 (as it is defined as integration server) and now I am trying to add a new business system (client 100) on SLD and it is giving me an error saying that the integration server already defined.
On the SLD error log it also shows tat No Host name defined in Exchange profile for sld.SID.host...
Are the above two errors related and how do I add the client 100 as a business system on SLD and have it as my Integration server.....
Please help..
Thanks,
Madhu

Moorthy,
Thanks for the reply...but all the checks were successful when I did the configuration in 000 and before I deleted the business system for client 000 in SLD...(See my post and problem above..)....I messed with my SLD and removed the business system for client 000 (which is configured as the integration server) and now when I try to add a new business system for client 100 (as integration server>..) I am not able to do as it gives me a error saying integration server already exists even though I deleted it from SLD Business system..
Thanks,
Madhu

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

Changing host name of JDI server

Hi,
during installation of JDI I used ip-addresses as host names for defining the domain host, the SLD server in domain definition, the dtr server URL in track definition, the CBS server URL in track definition.
I know that one shouldn´t use ip-addresses at all but we did have some trouble with the network infrastructure (DNS-Server, ...) at the beginning and the start of the project couldn´t be delayed.
Now, for any reason, the network department gave our server a new ip-address.
I then opened the CMS configuration tool and tried to change the host names (this time not to ip-addresses because DNS-Server works properly in the meantime).
Changing domain data is no problem. But when I try to save the changes of my track(s) I get an error message that says I should contact my administrator. I am the administrator
My Questions:
How is it possible to change the host names of JDI tracks?
What is to do at client side? There are already some developers working with the dev. configurations. Is it sufficient to change the according entries in the .confdef file or do the clients have to donwload the new dev. configuration from CMS host?
Thanks in advance
Helmut

Hello Helmut,
it should be possible to change the host names for tracks. You can get more error message details in the trace file of the Engine. To do so connect to your engine with the J2EE Administration Tool and check the defaultTrace.trc File in the Log Viewer.
For more details how to find this trace information have look into the Change Management Server Problem Analysis Scenarios (Link: http://help.sap.com/saphelp_nw04/helpdata/en/81/4bce4016d28031e10000000a1550b0/frameset.htm). In the first Scenario Incorrect Initial CMS Configuration you can also find the general information how to read and find the CMS trace files.
Please open a CSN message for the component BS-CTS-CMS if can not find the reason for the error message or if it is real problem in CMS.
Best Regards, Michael

PI 7.0 - SMICM - Host Name - Conflict with other places

Hi Friends,
We have host name conflict in SMICM and in other places.
For example, in SMICM it shows the host name 'A' for HTTP protocol and it is green, where as in other places like in RZ10 (Profiles in ABAP), Exchange Profiles (Connection Parameters, Host name), in SLD and in Visual Admin the host name is mentioned as 'B'.
At present, the messages are failing in SXMB_MONI with the error "CLIENT_RECEIVE_FAILED 402 ICM_HTTP_TIMEOUT ".
When we checked the paramter "icm/host_name_full" in RZ11,it shows the empty value.
This problem comes in our quality PI system, ABAP stack.
Could you kindly clarify in SMICM for the HTTP service from where the host name is taken and displays here?
Kind regards,
Jegathees P.

Connect to the operating system. Check this file (replace xxx with your SID and, if applicable, 00 with the correct instance):
C:\usr\sap\xxx\SYS\profile\xxx_DVEBMGS00_ILBNKxxx
Find this line:
icm/host_name_full = hostname.company.corp
Is this maybe empty / incorrect / incomplete?
After changing this the server needs to be restarted.
Sometimes we had strange behaviors after host name changes, which went away after going to sicf -> execute -> right-click on default host -> deactivate -> right-click again -> activate -> in the pop-up click the second activate button, which is for activating the system and all dependent entries.

Host name for R/3

Hi,
I was getting the error when when i try to use SPROXY in R/3 and in XI.
with some blog i could make XI work fine for SPROXY. but unable to make SPROXY work on R/3.
when i run SLDCHECK on R/3 sytem, host name it was taking was wrong.
here it is: http://wdf9272:50000/sld
why it is taking wdf9272 as hostname? host name should be starxi.
from where it is taking?
could somebody tell me, where can i change this?
thanks in advance.

Hi,
Plesae refer below links
check in R/3:
SCIF: Is the service sap/xi/engine activated?
SU01: Is user XIAFUSER not blocked and has suitable rights?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
No Connection to Integration Builder (Local Data)
No connection to Integration Builder (only local data visible)
prerequisites to configuration for ABAP Proxy -???
Thanks
Swarup
Edited by: Swarup Sawant on Feb 13, 2008 5:49 PM

Fully-Qualified Host Name empty in SMSY

Hello,
I am facing a problem in the SMSY of Solution Manager.
I've got some servers listed in the "servers" tree of the landscape components. Fine. But for all of them, the field Fully-Qualified Host Name is empty.
I need this entry for generating RFC with full host name....
If I put the full host name manually in this field, the RFC are right generated with the full host name in the technical data. But I would like to know how to retrieve it automatically (from SLD I presume...).
Anyone could help me ?
Thanks a lot.
Regards

Hi
Please have a look on the SAP note [Note 1368267 - Transfer fully-qualified host name|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1368267]
from SLD data capure please refer this
[http://help.sap.com/saphelp_sm32/helpdata/en/5c/36329947af074182eef7585ba88ee8/content.htm|http://help.sap.com/saphelp_sm32/helpdata/en/5c/36329947af074182eef7585ba88ee8/content.htm]
Jansi

FQHN (Fully qualified host name)

Hi all,
I'm trying to use FQHN in my PI 7.0 installation. I'm not a basis guy but I have installed a successfull instance without using FQHN before, now I want to do this again using FQHN.
I need information on this topic; such as where to set the host name to a FQHN. Is there a guide on this? Any related links and help will be very much appreciated.
Regards,
Gökhan

Hi again,
I have observed that my host name is used in these places:
etc/hosts file
Exchange Profile hostname parameters
SLDAPICUST transaction
RFC destinations like SAPSLDAPI, LCRSAPRFC etc
Visual Admin: SLD Data Supplier, Destinations -> PMISTORE, JCO RFC Provider
Also, there's an icm/host_name_full parameter in RZ10, which I have changed accordingly.
I have made up a FQHN for my server, which I configured from the computer name in the Windows settings. It has a form like myhost.mydomain.com and it is not on a domain. I have a basic local installation.
In SAPInst, I entered my host name as only , as it would not let me use the form myhost.mydomain.com. Afterwards, I have changed the name in the places I have listed above.
Is this enough for SAP standards for FQHN or have I missed any steps? I really need a guide on this.
Thanks,
Gökhan

Regrading how to change SLD host port?

Hi All:
I'd like to import some product component
from system landscape Directory, but it fails
because a wrong host port was assigned to it.
do you have any idea to change host port. which
file contain the host port
Thank you very much!!!

Hiii Sony !!
When you run SXMB_IFR transaction or when you run the SLDCHECK transaction.. U can find port no.
The default port number should be as I stated before.
Integration Builder Address not maintained
Check the config in tcode SLDAPICUST. Here u can change :
for example...
SLD hostname: is the hostname where SLD is installed. In your case it could be same as solman server name
SLD port: 5<J2EE instance no>00 (eg. 50000)
SLD gateway host: is the hostname where SLD is installed. In your case it could be same as solman server name
OR
Maintaining SLD Connection Parameters
1. Log on to the SAP System and call transaction
SLDAPICUST.
The screen Maintain SLD Access Data is displayed.
2. Choose Display<-> Change, and then proceed as follows:
a. Choose Insert Row.
b. Enter the connection parameters to the SLD:
u2212 Host Name: host name of the SLD host
u2212 Port: HTTP port of the J2EE engine (The following naming convention applies: 5<J2EE_instance_number>00. 50000, for example, if your J2EE instance is 00).
u2212 User
u2212 Password.
c. Set your entry as Primary.Only the Primary marked entry is active.
d. Save.

Change host name

Hi,
We installed XI system on host ab308g.xx.com
We want to change all urls refer xyz.ss.com insted of ab308g.xx.com.
What are the things, do I need to change?
Could you please let me know as early as possible.
Regards
Ben

Hi Ben,
You need to change the all places where the server host name is writing in hard code,
Change the Profile Pamater, the users, see note 8307,
Change RFC Destination in and out your WAS ABAP,
Change RZ70, SLDAPICUST,
then check that the abap system is going up,
if the abap work move to the j2ee
Change the J2EE connection to the ABAP system in the config tool -> Secure store,
then check that the j2ee system is going up,
Log into the Visual admin and change the JCO & SLD Services,
changing in sld server will be needed,
Finnaly, You will need to change the ExchangeProfile
I hope i didn't forget anything,
I don't know if sap will support it, it work for me,
Good luck
Guza
null

How can I get the host name from Email address?

hi
When I using socket to develope an email-sending servlet,I don't know how to get the host name from emial address.can you help me,thanks

Stripping off the user name will give you the domain of from field in the message. This is not the same as the host. Take a look at:
http://www.stopspam.org/email/headers/headers.html
Theres a pretty good discussion about email headers and how to use the information. You probably want to check the information here against the RFC.
Sean

We have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc. from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when

Hello All,
we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
I have checked IP,DNS,Gateway and more each & everything is well.
Pls suggest us.
Pankaj Kumar

Hi,
According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
Please try to enable the option below on the device which has shared folder:
Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How can I create a host name site collection when I have a 443 web application already created for App model?

Hi all,
I have a 2013 farm set up with the App model
1 web application for path based site collection using host name
1 web application with SSL (no host name)
1 web application for mysite
My business request is that I need to migrate SSL enabled 2007 content to this farm and use host name site collections. I tried to create one more web application for this without any luck (the 443 IIS folder is already used by another web application).
I thought I bind the previous 443 web application with another IP address should be fine. Seems like the IIS site is taken (https://server name:443) so it will not let me create one more. How can I solve this problem so I can create the web application
to host those host name site collections? Any suggestion is greatly appreciated.
Thanks in advance.
Sally

Hi Trevor,
Thanks again for your quick reply. I try the option 2 right after your post. I use my front end server name for public URL (https://WFEName:443) and it fails again. The error message is:
The directory C:\inetpub\wwwroot\wss\VirtualDirectories\443 is already being used by another IIS Web Site. Choose a different root directory for your new Web application.
After reading more, I saw mix Hosted Name Site collection and Path-based site collection aren't recommended. Unfortunately I already have Path-based site collection created with App model web application
(the web application without host name) in my farm. In my Option 2, that web application without host name is used for App routing. This takes the root folder 443 which will not allow any other web application to use the same name again.
Does that mean we can't create Host Named Site collection in the same farm? Is there any configuration I need to check?
Thanks again.
Sally

Sld host name ?

Similar Messages

Maybe you are looking for