SLD Parameter Object Server
Hi!
When I access http://<localhost>:50000/sld, then clicking on to Technical Landscape, I get an error "Please set the SLD Parameter Object Server first".
I suspect that I haven't activated SLD. So I searched on how to activate it and found this procedure, "Configuring and Activating System Landscape".
http://help.sap.com/saphelp_nw04/helpdata/en/52/784641db92491de10000000a155106/frameset.htm
<i>Procedure
The SLD is part of the J2EE Engine. To activate and configure an SLD; you need to perform the following steps:
1. Execute the following URL to open the SLD start page: http://<host>:<port>/sld. <Host> and <Port> are the values for the associated J2EE Engine.
2. Choose Administration -- Server Settings.</i>
The weird thing is that when I access SLD start page, I couldn't find "Administration" in it.
Additional Info:
I can also see a clickable link below that says, "Namespace: sld/active".
When I click on it, a prompt comes out "Please start the SLD server first."
> Hi Bhavik,
>
> Yes, the SLD page is coming properly after using
> Administrator.
>
> I couldn't find the link "Administration". I can
> only see clickable links like HOME, HELP, TECHNICAL
> LANDSCAPE, BUSINESS LANDSCAPE, SOFTWARE CATALOG, NAME
> RESERVATION, CONTENT BROWSER, and CLASS BROWSER.
>
> After logging in successfully with Administrator, I
> click on TECHNICAL LANDSCAPE. Then that is when I
> get the error.
>
> Thanks!
>
> Erik
Similar Messages
-
Hello Experts,
I am trying to change SLD object server. However, i am unable to find the document of the steps. Appreciate if anyone can share the steps.
Regards,
CasmitoDear Casmito,
Regarding the query posted by you kindly refer the following SAP Note:
935245 - Importance of "Object Server" SLD/LMDB parameter
This would guide and help you out.
Kind Regards,
Abhishek -
LMDB - SLD "Source and target system have the same object server name"
Hi,
the system is a SM7.1 SP1
For some reason (Object-Server-Name changed), the job that syncs the sld and lmdb cancels...
I set the LMDB-Object-Server-Name to its original Name...
Now i've deleted the sync-config in the solman_setup and try to start a new sync, but i get the following error, when i try to configure the source-system:
'Source and target system have the same object server name: CISM318'
But the names are different: 'SM3' (LMDB) and 'CISM318' (SLD)
Any suggestions ?
best regards
Christoph
Edited by: Christoph Bastian on Aug 26, 2011 9:37 AM
Edited by: Christoph Bastian on Aug 26, 2011 11:18 AMproblem solved...
Apparently the sync needs some hours to finish a object-server-name-change...
best regards
Christoph -
Change Object Server in SLD after system copy and SLD move?
Hello,
we did the following:
- we migrated the SLD to the production system in our landscape
- we copied the NWDI to a new system
- the old object server was named sapsrv88 (object server attribute in the SLD) which was the hostname of the old SLD server
Do I have to change the object server attribute to the new hostname of the SLD? Does this have any influence on the software components that we allready developed?
Thanks and best regards
JensHello Jens,
you can rename the object server - details you'll find in SAP note 935245
When you rename it, the ID of the objects in the SLD is changed to the new ID, so normally you shouldn't have any problems with that.
If you're unsure about it, you can backup your SLD content using "Administration => Content => Backup => All Instances" - that backs up everything under /sld/active
or backup the software components you devoped using http://<hostname>:5<instance-no.>00/SCD/SCDownload
Best regards
Cornelia -
Hi,
This is for PI 7.0.
I got to http://<hostname>:50000/sld and choose <b>Administrator</b> link.
On the right middle/bottom there is a Object Server name. This <b>Object Server</b> name is <b>localhost</b>. Where do I have to change it so I can see the actual host. I am expecting it to be a actual host name. My SAPLOCALHOSTFULL is set to full name.
Please let me know if anybody has any idea about it.
Regards.
SumeWhat do you mean by assumptions Mr. Ahmad?
I have done the post installation steps for SLD and ran the template as well. They all finished successfully. Now as I said that it an AIX server, you can never open a SLD home page from the server. It has to be a windows based machine. I use my laptop to open the web pages of lot of SAP related stuff like /sld or /unseradmin etc. What I do is I type
http://dpix100:50000/sld.
Now you see from the above that I am not using localhost but rather an actual host to login.
So I do not know what you mean by are you working from ur local machine or working on XI server directly because I can never work directly from XI server as far as opening a SLD page is concern.
Now when you install XI on AIX/UNIX, by default it has localhost at lot of places. One has to change it. Read my last reply where I am saying how to change it and read the SDN link as well.
My question is that I do not se that Object Server link on the Administrator page.
Please reply if anybody has any idea about it.
Regards.
Sume -
Failed to read parameter object - error in BO XI server
Hi all,
We have the enterprise edition of Business Objects server XI, which is available in the Solaris 10 machine. We try to upload the rpt file using the Central Management Console Log in, at the time we got the following error.
There was an error while retrieving data from the server: Failed to read data from report file /var/tmp/data_gen_letter.rpt63065d888163420. Reason: Failed to read parameter object.
Can anybodies help me on this, why this error has came.
Thanks in advance.
Regards,
Vel.I am facing the same issue. I am using BO XI 3.1 (12.1.0) and CR 2008 (12.2.3.467)
Initially I was getting "Failed to read parameter object"
I found this resolution posted
1. Log on to Business View Manager as administrator.
2. Click View > Repository Explorer.
3. Right-click Dynamic Cascading Prompts. Click Edit Rights.
4. Click the appropriate user or group receiving the error. If the group is not present add them.
5. Click the Granted option for the right to View, Edit & Set Security rights.
6. Click OK. Close Business View Manager.
I did the above steps. When I try to save the CR report the first time, the dynamic prompts get added to the Dynamic cascading prompt list in Buss View Mgr, but the report does not get save to BOE. I get an error
Reason: Unable to launch c:\Program File\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportAdd program to add report to the system
If I try to save the same report to BOE again, it gets saved with any error. SO, the first time I try only the dynamic prompts get saved, the next time the report.
Any help on this please? -
Failed to read parameter object error in BO server XI
We have the enterprise edition of Business Objects server XI, which is available in the Solaris 10 machine. We try to upload the rpt file using the Central Management Console Log in, at the time we got the following error.
There was an error while retrieving data from the server: Failed to read data from report file /var/tmp/data_gen_letter.rpt63065d888163420. Reason: Failed to read parameter object.
Can anybodies help me on this, why this error has came.
Thanks in advance.
Regards,
Vel.Hi,
the problem has to do with the permissions on dynamic prompts. Eventually you can solve this by setting the permissions on the prompts using the Business View Manager. (CrystalBVM.exe: to be found in BOBJ client installations on windows)
Do your report fetch data from an SAP R/3 system?
Regards,
Stratos -
"Can't set object server" Error during SLD Initialization
Hi,
During System Installation at SLD configuration, problems occured and
we skipped the step for later execution. After Installation and SPS13
Application, we tried again but the following error occurs.
Can't set object server
com.sap.engine.interfaces.cross.ObjectReferenceImpl incompatible with
com.sap.engine.services.applocking.LogicalLockingFactory
Here I'm attaching the defaulttrace.log section produced during the error
Defaulttrace.log
tion#administrators#SAP-J2EE-Engine#administrators#
#1.#001125BDBC10007600000028001420FA000443E69BC669DF#1200557641853#com.sap.lcr.webui.Admin#sap.com/com.sap.lcr#com.sap.lcr.webui.Admin#Administrator#6330##bporprod_BPP_1663750#Administrator#22947de0c4d411dccb66001125bdbc10#SAPEngine_Application_Thread[impl:3]_13##0#0#Error#1#/Applications/SLD#Plain###Can't set object server#
#1.#001125BDBC10007600000029001420FA000443E69BC66ACD#1200557641853#com.sap.lcr.webui.Admin#sap.com/com.sap.lcr#com.sap.lcr.webui.Admin#Administrator#6330##bporprod_BPP_1663750#Administrator#22947de0c4d411dccb66001125bdbc10#SAPEngine_Application_Thread[impl:3]_13##0#0#Error##Plain###Thrown:
java.lang.ClassCastException: com.sap.engine.interfaces.cross.ObjectReferenceImpl incompatible with com.sap.engine.services.applocking.LogicalLockingFactory
at com.sap.rprof.dbprofiles.JDBCProfileLock.<init>(JDBCProfileLock.java:52)
at com.sap.rprof.dbprofiles.JDBCProfileFactory.newProfileLock(JDBCProfileFactory.java:41)
at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactoryForUpdate(RemoteProfile.java:230)
at com.sap.lcr.start.EnvManager.getWriteableEnv(EnvManager.java:512)
at com.sap.lcr.webui.Admin.actionInitialSetup(Admin.java:877)
at com.sap.lcr.webui.Admin.doGet(Admin.java:231)
at com.sap.lcr.webui.Admin.doPost(Admin.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.#001125BDBC10005F000092B3001420FA000443E69BE47659#1200557643822#com.sap.engine.services.security.roles.SecurityRoleImpl#sap.com/irj#com.sap.engine.services.security.roles.SecurityRoleImpl#Guest#6332####6047b4f0c44211dc8975001125bdbc10#Thread[Thread-53,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error#1#/System/Security/Audit/J2EE#Java###: Authorization check for caller assignment to J2EE security role [ : ].#3#ACCESS.ERROR#SAP-J2EE-Engine#administrators#
does anyone faced the problem, and please a solution purpose
regardsdefo an autorisation issue
#1.#001125BDBC10005F000092B3001420FA000443E69BE47659#1200557643822#com.sap.engine.services.security.roles.SecurityRoleImpl#sap.com/irj#com.sap.engine.services.security.roles.SecurityRoleImpl#Guest#6332####6047b4f0c44211dc8975001125bdbc10#Thread[Thread-53,5,SAPEngine_Application_Threadimpl:3]_Group##0#0#Error#1#/System/Security/Audit/J2EE#Java###: Authorization check for caller assignment to J2EE security role : .#3#ACCESS.ERROR#SAP-J2EE-Engine#administrators#
Where you assign the role depends on how you have setup your ume configuration - to the ABAP stack or have it managed in the Java stack
If its just a java stack configuration for user management page of the java stack
http://<servername>:50000/useradmin and give the user as many roles and permissions from there
otherwise its PFCG in the abap stack of your system -
Hi,
I'm facing this issue with only one dashboard in BI4 Platform. When trying to view it through the BI Launch Pad, I get the following error:
"Parameter object with the name "URL_PARAM" and the index "0" still does not exist in the parameter 1[...]".
I've seen this thread where a similar thing was reported with NetWeaver platform.
My client as well as server versions are Release 1.4 SP0 Patch2 (14.0.5).
Also, although some of the pictures referenced in the dashboard are not in the Public Folders on BI4. Could it be that it's not able to reference the images and hence not be displaying the whole dashboard?
Please let me know if anyone has a solution to this.
Thanks!
- Sakshi DhakadHi,
So here are the versions we currently have:
SAP BO Design Studio (64 bit) - 14.1.0
SAP BO Design Studio 1.4 for BI Platform - 14.1.0.349
And on checking on Central Management Console, I get this:
SAP BO BI Platform 4.1 Support Pack 5 Patch 2
Version: 14.1.5.1568
Also, I'm not sure if I installed an add-on or the patch. Based on these versions, could you tell me how to fix the issue ?
Thanks! -
Failed to Read Parameter Object
We are new working with Crystal Server. I cannot publish any reports that have parameters. I receive an error message that states "Failed to Read Parameter Object". I have tried all 3 methods for publishing reports (using CMC, using the wizard, saving directly from crystal design) and receive the same error message. I have no problems publishing reports that do not have parameters. Thanks for helping resolve this issue.
Regards,
JeffFew things to clarify and heck:
- What is the version of CR Reports Server?
- Are your parameters List of Values or just regular text, date parameters?
- Verify that ListofValuesJobServer is up and running in CCM (Central Configuration Manager)
- The best practice for List of Values Paramters is to use Business View Manager.
Regards,
Sinan -
Failed to read data from report file, failed to read parameter object
Error message when doing a u201CSchedule List of Valuesu201D
failed to read data from report file,
c:\docume~1\user........
failed to read parameter object
Earlier in the day it worked just fine nothing had been changed.
I have admin right on the windows server and in central management console
Can someone please help with this issue.Hi Glenn
Please let us know the following:
1.What is the exact version of Crystal Reports Designer?
2.What is the version of Business objects Enterprise installed on the machine?
3.Are reports based on Business views,Deski,Webi?
4.Are the reports migrated from older version of Crystal Reports to new Version?
Thanks
Shraddha -
Failed to read parameter object when publish crystal report 11
Hi,
I created a dynamic parameter crystal report and while running in CR (XI) everything works fine.
Once I am trying to publish to server (infoview & business objects) I am getting error message "Failed read data from report... Reason: Failed to read parameter object"
(It works fine and was published sucesfully if I change to static parameter.)
I already try to change 'Edit right' in Business View Manager as other people suggest in other place and I still can't publish it without error.
Please help.Re: Failed to read parameter object using Dynamic Parameter
Posted: Sep 27, 2010 9:23 PM in response to: sharonamt Edit Reply
Hi Sharon,
I am facing same kind of issue with crystal report 12.2.0.290 and BO server 12.1.0 © 2008 Business Objects.
While i am trying publish the report with dynamic parameter, its throwing the error "Failed to read parameter object ".
I am not sure what to do..can you please guide me ?
Where we need to install service pack at machine which having crystal report designer or at Bo server
Regards,
Johnes -
Failed to read parameter object using Dynamic Parameter
Hi All
In one of my report I am using dynamic parameter, I tried to publish the report in BOXI and got the following error:
"Failed to read data from report file C:DOCUME1...LOCALS1Temp~crw{u2026u2026..-u2026.-u2026.-u2026.-u2026u2026u2026u2026}.rpt. Reason: Failed to read parameter object"
but if I change that to static parameter I am able to publish it.
I am using Crystal Report 2008 Version: 12.1.0.892
Product Type: Full
BO Version: Product: 12.1.0 © 2008 Business Objects
I went thru many forums and came up with some settings while publishing but nothing worked out. And some mentioned about the service packs and fix pack issues. But I am not sure which should be installed in order to make this work for my versions.
Can anyone please suggest, what can be done to publlish a report with dynamic parameter?
Thanks
SreeHi Sharon,
I am facing same kind of issue with crystal report 12.2.0.290 and BO server 12.1.0 © 2008 Business Objects.
While i am trying publish the report with dynamic parameter, its throwing the error "Failed to read parameter object ".
I am not sure what to do..can you please guide me ?
Regards,
Johnes -
Crystal Report: failed to read parameter object
Hello -
I have a report that consists of numerous static parms and one dynamic parm. I can save the report to my desktop but cannot save it to BO 3.1 CMC Personal Folder (or any folder for that matter).
The dynamic parm does not use a LOV based on Business Views. A table associated with the same data source as the stored proc on which the Report itself is based provides two fields - a code field that is used in the Value and a name field which is used in the Description.
The specific error is:
"Failed to read data from report file <file name> Reason: failed to read parameter object".
All the normal things have been checked -
- VERIFied the database
- Ensured 'No Printer' is checked
- Ran the report (successfully) on the desktop (locally)
The data source is Oracle. The report can be saved to the CMC and run without problem if the dynamic parameter is deleted from the report.
The version of Crystal Reports is CR 2008 vers 12.04
I've seen numerous postings regarding LOVs and Business Views, especially surrounding security issues, but I've yet to see a note about a dynamic parameter based on a table....
ThanksHi!
Thanks for the response....
Re: check the "Enable Repository Refresh" checkbox
The SAVE failed with the Failed to read data from report file error.
When I went to the Bus View mgr, I found the LOV. It was set as a cascading prompt (not what I wanted when I set the parm) and could not edit it. No permissions.
I went back to the report and tried to edit the parm into which I had stuffed the LOV I can't touch in Bus Views, and found I can't open in the report canvas without logging into the repository.... which I did.... and went to edit the parm...can't open in the report canvas without logging into the repository.... which I did.... and went to edit the parm... You get the idea....
What I had WANTED to do is take a table with 2 fields in it - a NAME and a CODE field, create a dynamic parm, use the CODE field as the Value and the NAME field as a description. When I brought in the LOV, it came in as a cascading LOV... I needed to have the Description as the user fronted piece... but I can't seem to get there from here..... -
Getting Error while importing FULL SLD in PRD Server
Hi Experts,
I am trying to import FULL SLD into Production server from QA server. I have exported full SLD from QA server and then try to import the same in the Production. But, while importing it gives me a warning <b>"The selected ALL 1.0 full import belongs to the export line ALL which is not compatible with the export line(s) SAP_CR of previous imports. The data of the selected import may possibly interfere with the previously imported data."</b>
And it shows two options: CANCEL IMPORT, IMPORT ANYWAY
**All the servers are on Xi 7.0 sp08
Kindly Help...Hi Ajay,
These errors as mentioned are because of different CR versions and as mentioned in the blog:
<i>1) the source system is not defined in the SLD 2) the target system is not defined in the SLD 3) the association already exist 4) the source system and the target system are in the system business system group</i>
Regards
Vijaya
Maybe you are looking for
-
Um documento de faturamento está gerando diversos docnums
Prezados, Gostaria da ajuda de vocês, para um problema muito sério que está acontecendo no cliente. Por quatro vezes, 1 vez por mes entre janeiro e abril/2013, ocorreu um erro raro no faturamento da empresa. Um mesmo documento de faturamento gerou di
-
Image-Safe data on Dell Optiplex GX520
Good afternoon, I am having trouble getting image-safe data to stick on our Dell Optiplex GX520's. The machine will image fine manually, but no matter how many times you reboot it, the image-safe fields don't populate. In the BIOS I switched the SATA
-
Hi, when I use cmd-p in Finder to print a document, it doesn't print using my last preset printing preferences (inc. double-sided). If I open the doc in Word and print, it's fine. But the cmd-p shortcut only prints the default settings, not my preset
-
How to open a mackbook Pro without a password
I dont remember My password..
-
Hello, I have created a room template, when the room is created a folder with the name of the room is created. This folder is placed in a FSDB cm repository. What it happens when I create the room is that the folder is created but inside a room calle