SLD: Pointing two business systems to the same client...

Hi Guys,
Is there anyway to make two business systems point to the same client(on the same r/3 technical system)? how about a work around?
Thanks,
Harsh

Harsh,
>>Finally all collapse to one client in production.
Even though you will have multiple Business Systems in every envrionment, the final transport will happen from only one environment.
DEV --> QA --> PROD. In this case, objects are moved from dev to qa and then from QA to prod and so, all you will need is the trasnport target created in the QA business systems pointing to the Prod busines system and do the transport.
>While transporting to a new SLD(quality to prod) can I choose one transport target for multiple source business systems?
Take a look at this document for multiple SLD transports. Should answer all doubts,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards,
Bhavesh

Similar Messages

Can IDoc sender and receive system be the same client?

thanks.
I think one client can't assign to two logical system.so?

Can IDoc sender and receive system be the same client?
yes
Regards,
Prateek

Two SRM system in the same Portal

Dear Guru,
we need your support for the following question.
I'm working with SRM 7 and ECC in a extended classic scenario. SRM is available thorugh the portal. For training activity we need to have another copy of SRM and ECC system. It is possible to connect in the same time two SRM system in the unique portal?
Thanks a lot.
Best Regards
Giuseppe

Hello Giuseppe,
As per the standard , there is no possibility to work on twins SRM system at the same time on Portal. And as Ivy Li mentioned that all SRM IViews have system alias as SAP_SRM which points to 1 system at a time . Now as per your saying twins SRM system with unique portal which will also create a problem as most of the time the portal navigation would be locked.Now again while uploading the WDA package for SRM portal your data's might get effect if you are showing your actual data in your training session. If you find then there could be many reasons.
Regards
Gaurav Gautam

Two applications systems with the same DB

Hi,
is it possible to have two Oracle applications systems on the same DB ? I mean for exemple two e-business suites (Oracle applications) each one with a different instance of the same database ( DB version 9i and OA version 11.5.9).
Many thanks before.

Not possible,certified or supported,anyways you cannot have two SIDs for the same DB can you?
Sam
http://www.appsdbablog.com

LMDB - SLD "Source and target system have the same object server name"

Hi,
the system is a SM7.1 SP1
For some reason (Object-Server-Name changed), the job that syncs the sld and lmdb cancels...
I set the LMDB-Object-Server-Name to its original Name...
Now i've deleted the sync-config in the solman_setup and try to start a new sync, but i get the following error, when i try to configure the source-system:
'Source and target system have the same object server name: CISM318'
But the names are different: 'SM3' (LMDB) and 'CISM318' (SLD)
Any suggestions ?
best regards
Christoph
Edited by: Christoph Bastian on Aug 26, 2011 9:37 AM
Edited by: Christoph Bastian on Aug 26, 2011 11:18 AM

problem solved...
Apparently the sync needs some hours to finish a object-server-name-change...
best regards
Christoph

Two SAP systems in the same host "no files processing"

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
How can I set up this issue?
Thank you very much
regards
Thank you very much
regards

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
How can I set up this issue?
Thank you very much
regards
Thank you very much
regards

Two editors on two edit systems sharing the same footage, suggestions?

So I just got done shooting my first feature and now I've got to come up with a plan for editing.
Here's what I got:
1 Core 2 Duo iMac with FW800 FCS2
1 Core Duo iMac with FW400 FCS2
~40hrs of DV25 footage
$800 dollars to spend on a storage solution
The Core 2 Duo iMac will be the primary system for the final edits, color correction, ect. and the other iMac will be used for rough cuts, capturing a/v, exporting, etc.
For the most part only one system will be editing at once, but I'd like both systems to have simultaneous access to the footage for the days when we need to hustle.
Originally my plan was to get a 1TB G-RAID2 (or something similar) and run firewire to both systems but from what I've heard, that's a bad idea. Maybe I could link it to one computer and have one system edit over a network?
I'm starting to think the only real solution is to give both systems their own drive, but it seems like a waste since we're using roughly 500GB of the same stuff. My "dual edting" idea is starting to seem like more of a pain than a benefit.
Thanks in advance for any help, and please let me know if you have a better idea for our post production setup overall.

With that much money, you only have two solutions.
1) Get two drives...put the same footage on both, keeping the exact same file structure. Name both drives the same name so that when you swap projects you don't need to reconnect. Render files you will have to re-create...by rendering. Any new footage you capture onto one will have to be copied onto the other.
2) Connect one drive to one iMac, connect both iMacs via Ethernet, then enable file sharing and include that drive. This, however, is very unreliable.
Shared Storage solutions costs thousands to tens of thousands of dollars.
Shane

Having Two Operating Systems on the same computer.

Is it possible to have two operating system on one computer?
I would like to have both Mac OSX 10.411 and Mac OSX 10.5 on my Power Mac G4.
I would like to be able to access each system independently. So that I may use my
editing software which is 10.411 compatible but not compatible with 10.5. Is this possible?
Thanks!

Welcome To  Discussions stevevideo1!
Yes if you Partition The Hard Drive.
ali b

Two business ofices for the same plant:

Hi frndzz..
   I'm doing implementation for my new client.
His factory(plant) is located in a village & he got a head office in the city which looks after the sales & purchases for the plant and the head office. In the same way, the plant also purchase from local vendors.
They do have some common vendors.
They need Accounts reports / Purchase reports / salaries / creditors and vendors all required as per the above seperation i.e., plant & head office.
   Our suggestion was to use seperate ledgers in the chart of accounts so that we can reporting on both of them but they need one ledger but to maintain the data seperately based on the postings where they want to choose to post to head office or plant.
How can we do it. For ex: stationary expenses, I have one account but posts to it by choosing head office or plant while posting so that they can a report on it.
fair answers will be rewarded immediatly.
thanks in advance,
chaitanya

hey jagadish,
     sorry for the delayed reply. We are using only one company code.
others...any clue how to handle this??
thanks in advance,
chaitanya

Two integration server on the same sld group

hii,
If I configure two xi integration server to one sld in the same group?
Is it recommended?
Will it cause a collision between the two systems?
tanks in advanced
Royi

Hi,
This can be done as follows,
1. Create multiple Business System Soruce Gropus. When creating the group for the source, you need to give the related integration server . In your case create the Source Busss System Group A and Group B for intregration server A and B.
2. Create Business System Target Group Group C for integration server C which is the target integration server.
3. Assign the source business systems to the correspiodning groups by providing the correct related integration server.
4. Do the same for the target Business Systems as well.
5. Now, go to each of the Source Business System and then select the Transport Targets option and map it to the corresponding business system on the target side. This should be done for all Source Business System of Group A and Group B . They should all point to the correct Business System of Group C.
6. When importing objects you would need to make sure that the Business Systems Being used in the Configuation Scenario all belong to the same Source Business System ., ie. a confgiuration scenario should be such that all business systems used in it belong to either Group A or Group B and not to both.
Regards
Bhavesh

Error while reading ID of own business system from the SLD

HI guys when trying to send Idoc from my R/3 system to SUS i am getting the following error in XI
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>DSM</SAP:P1>
<SAP:P2>900</SAP:P2>
<SAP:Stack>Error while reading ID of own business system from the SLD for system DSM and client 900</SAP:Stack>
I checked in sxmb_adm on both the ends on Xi as well as on my SUS server in Xi the role is the Integration server and on the SUS it is Application server also checked SLDAPICUST which is configured rite. Plz help me to come out of the problem.
Regards,
Anand

Hi Anand,
check the two thing's in XI.
1. First created technical system in XI to identify your XI server (Web as ABAP and Web AS Java)
2. Create the business system based on above technical system and select the role of business system is Integration server.
URL : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Create the technical system based on your SAP R/3 system.
4. Create the business system based on your SAP R/3 system.
here you need to select role of business system : Application system.
related integration server is : <XI System SID has to come>
and try to refresh the initical cache once ...
http://<hostname>:<j2ee stack port>/CPACache/refresh?mode=full
after all the things post what is the problem you are faceing.
Regards,
Venu.

Error while reading ID of own business system from the SLD for system D18

Dear guru's,
I have almost completed a file2proxy scenario but I'm stuk on the following.
When sending a message the outbound adapter says:
Error while reading ID of own business system from the SLD for system D18 and client 200
What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
Any suggestions?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>D18</SAP:P1>
<SAP:P2>200</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
Hope you problem is fixed

Creating a Business system in the SLD

I am receiving an error message when trying to create a business system in the SLD. The error is "The selected client has an associated logical system nae that is already used for another business system. Select a different client."
Here is my issue. The business system that I am creating is for our R/3 4.6C production system. I currently have a business system for our R/3 4.6C quality system. Our prodution and quality R/3 systems do have the same logical system name and client number. This is because we recreate our qaulity R/3 system from our production system.
So, the question is, How do I create a business system in the SLD for my production R/3 system when the logical system name is used assoicated with and business system.
I should add that all my R/3 systems have been created as technical systems without any problems.
Thanks,
Jim

It is recommended to have all ALE names unique.
If it is not possible the following workaround can be used.
Create one system in SLD (business system/technical system) which contains the ALE name. Proposal: The production system
Create the other systems(dev/QA) without the ALE name
During configuration the production system will be configured as usual.
For Dev/QA systems: Define in the receiver agreement the header mapping and use The Receiver service to reference the production system. Because you reference the production system the ALE name of the production system will be used to fill the idoc.

Risks of two development groups in the same system

Hi,
I need your help.
I'm looking for a document about the risks having two development groups in the same system.
The point is: An external party will come soon and start the implementation of a mini H2R in the same system as we (the internal team) are working for SD, MM, CO,... As the developments are cross-client, I'm asked to write a document explaining the risks in such cases like:
conflicts: working on the same objects
authorisations: each group should be assigned to different packages
planning: the go-live should be at the same time
transports: there can be conflicts on a transport-level
If you have any documentation that can help me, please let me know.
Kind regards, Gilles.

I hope this is not considered a link farm:
Potential conflicts between already released transports:
Program to validate transport sequence
Uwe Schieferstein's blog on "Dangerous Liaisons in User-Exits and How to Avoid Them":
/people/uwe.schieferstein/blog/2008/11/11/dangerous-liaisons-in-user-exits-and-how-to-avoid-them
Just two of many things to observe...
Thomas

Registration of Business system for the Integration Engine Java in the SLD issue

Hi,
We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully.
- Configuration Wizard: PI-AEX initial setup
- Configuration Wizard: PI Self Test for AEX
However when we were Checking the AEX Configuration as per help.sap.com
Check the registration of a business system for the Integration Engine Java in the SLD:
 Enter https://<host>:<port>/sld .
 Choose Start of the navigation path Business System Next navigation step Integration Engine Java <SID> Next navigation step Integration End of the navigation path.
 The pipeline URL must be: http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet?ximessage=true .
More information: SAP Note 1435392
for us the Pipeline URL is as below
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
and the rest " ?ximessage=true " is not there.
Also we ran the below wizard
Configuration Wizard: PI Self Test for AEX
and it finished successfully without any issue.
Any Suggestions what could be missing.
Thanks,
Regard
Ahmed Mohammed

Hi,
I found the below SAPNOTE which confirms that the Pipeline URL should be
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
1564449 - PI CTC Wrong Pipeline Url after AEX Initial Setup
However on help.sap.com it is different.
Any one experienced the same ?
Regards
Ahmed Mohammed

SLD: Pointing two business systems to the same client...

Similar Messages

Maybe you are looking for